Invalid city name; maintain table T7BRCITY Message no. HRPADBR99006

HI experts,
I got the following error while updating country name in PA30.Below is the screen shot.
Can any one guide me through process to Insert Brazilian municipality code
Thanks in advance.
SSK
Message was edited by: sriramula kishore

Hello BW/BI gurus,
I am working in BI 7.0 and when I am try to look at the PSA entries on a DSO (Right Click on DataSource and go to Manage), I get the message "Invalid DataStore object name /BIC/B0000336: Reason: No Valid Entry in table RSTS".
Also, when I try to display the transformation, I get the "Source Not Active" error.
There is also a "Not Equal" on "M Version is different from A version" on the DataSource.
I tried replicating the DataSource and reactivating it using the RSDS_DATASOURCE_ACTIVATE_ALL program. But the error persists. I am facing this error in the Production system.
Any help on the issue is appreciated.
Thanks,
Vivek

Similar Messages

Invalid Column Name message in the subquery

Hi All, I am receiving the invalid column name message in the subquery. Please help me if there is any work around or change in the query:
Sample query:
update table1 set table1.column1 =
(Select column1 from
(Select column1 from table2 where
table1.columnX = table2.columnX
order by table2.columnM desc,table2.ColumnN desc,
where rownum =1)
When i run the above query i am receiving the following error message:
ORA-00904:invalid column name at table1.columnx.
This column is already existing in table1 and looks like this table is not recoginzed inside of the subquery.
I am trying to update table1.column1 using the first value from table2 after ordering by table2.columnM desc, table2.columnN desc. (ColumnM and ColumnN are the Date columns which i need to perform the sorting). I am new to sql/Plsql. Thanks in Advance for help....

The problem is that you can not refer to columns from the outer table from inside a second subquery inside your subquery. Only one level of subquery can be used to transport the column name,.
A solution can be to use groups and aggregation functions instead of rownum = 1.
The following might work.
untested
update table1
set table1.column1 =
(Select max(column1) keep (dense_rank first over table2.columnM desc,table2.ColumnN desc)
   from table2
   where table1.columnX = table2.columnX
   ) Another way can be to to make a UNCORRELATED subquery first and then filter on that uncorrelated query with the column name from the outer statement.
This time I use a analytic function.
untested
update table1 u
set u.column1 = (select v1.column1
   from
     (Select t2.column1, t2.columnX, row_number over (partition by t2.column1, t2.columnX order by t2.columnM desc,t2.ColumnN desc) as rn
      from table2
      ) v1
   where v1.columnX = u.columnX
   and v1.rn = 1
where /* where clause is missing! */

Invalid XML, Expected item name child table but got 'row' UDO name

Hi expects
my client is using SAP 2007B, PL15
I have problem in uploading data via DTW in UDO master type table.
I don't have importing data
Only i have problem in updating data in UDO master type table
Detail log is Invalid XML, Expected item name 'TB_SALES_AGTDISC_CH' but got 'row' UDO_obj_sales_agt_disc
TB_SALES_AGTDISC - master type
fields are Code,Name
'TB_SALES_AGTDISC_CH -master row type
fields Code,vaidfrm,validto,disc_ltr
Please give some suggestions
Prasad

Hi
I checked my previous thread.
But still I am getting problem in importing one additional row in child table.
Message i was getting when i importing via DTW Re: Invalid XML, Expected item name<child table> but got 'row' UDO name
Please give me some links or procedure how to import row in child tabe
Prasad

Cannot edit wiki pages-- Exception message: Invalid field name

We have migrated from one Sharepoint 2010 environment to another Sharepoint 2010 environment and only wanted to preserve a few sites, mostly Enterprise Wiki Sites.
We have imported 5 total Enterprise Wiki Sites, all of which point to particular Term Sets in Managed Metadata.
2 wikis are pointed to term set A, 2 wikis are pointed to term set B and one wiki is pointed to term set C.
One of the wikis pointed to term set A is working, and one is not
The malfunctioning wiki has the following symptom:
Whenever you try to edit a page (new or existing) and save your changes, regardless of whether it is tagged, you cannot save your changes. When you try, you get the error below.
Error
Failed to get value of the "Wiki Categories" column from the "Managed Metadata" field type control. See details in log. Exception message: Invalid field name. {f863c21f-5fdb-4a91-bb0c-5ae889190dd8}
https://sharepoint.domain.com/wiki/adminwiki /wiki/adminwiki/Pages.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 4188c150-de8f-4940-9dbd-54939f117bfe
Date and Time: 3/12/2012 4:26:09 PM
Go back to site
To me, it looks like there is an invalid URL, since it gives the URL path, and then there is a space, and then it also has a relative URL to /wiki/adminwiki/pages ...is this normal?
Any ideas on how to fix this is great. I don't think it has anything to do with the Managed Metadata service or the Term Store since the other wiki site (pointing to the same exact Term Set) is working normally with no problems.

To solve the problem make sure that the template you are using for the current page (with errors) has the same content type as the page. In example of the Enterprise Wiki page, I forgot to set the content type to an Enterprise Wiki page on a custom page
template I just added to the Master pages.
So what I had to do is:
go to properties of the page with errors described above and set it to be
Enterprise Wiki page
go to master pages and set the custom template to be of the same type, Enterprise Wiki page
That solved the problem

How to find out what is the name of table/view is being maintained in IMG?

Gurus,
Any general trick to find out what is the name of table/view is being maintained
by a given IMG item while configuring?
Thanks,

Hi,
Click F1 on the table/ view you will get the table name and then go to transaction give this table name and click on Find Maintainance Dialog their you will get the views related to that table.
Regards,
IFF

Target message based on the city name

hi my source message schema is like this.based on the city name the target file will be created at the same time records to that particular city only.
<Record>
      <person>ramesh</person>
      <City>xx</City>
      <Address>xyz</Address>
   </Record>
   <Record>
      <person>suresh</person>
      <City>yy</City>
      <Address>abc</Address>
   </Record>
   <Record>
      <person>ajay</person>
      <City>yy</City>
      <Address>def</Address>
   </Record>
   <Record>
      <person>kirshna</person>
      <City>xx</City>
      <Address>ghi</Address>
   </Record>
target message schema will be like this.
<City>
<Record>
<person>ramesh</person>
<Address>xyz</Address>
</Record>
<Record>
<person>kirshna</person>
<Address>ghi</Address>
</Record>
</City>
<City>
<Record>
<person>suresh</person>
<Address>abc</Address>
</Record>
<Record>
<person>ajay</person>
<Address>def</Address>
</Record>
</City>
iam getting correct only when same city records giving together.its creating another city record if i gives differently...how to achieve this

hi for my above source schema..when iam doing mapping iam gettin like this
<City>
<Record>
<person>ramesh</person>
<Address>xyz</Address>
</Record>
</City>
<City>
<Record>
<person>suresh</person>
<Address>abc</Address>
</Record>
<Record>
<person>ajay</person>
<Address>def</Address>
</Record>
</City>
<City>
<Record>
<person>kiran</person>
<Address>ghi</Address>
</Record>
</City>
here 3 city header files are creating with city name instead of two header files..here source side Iam using only two city names...so i want two header files target side...

False "Invalid User Name or PAssword" message

Trying to restart my iMac with another user logged in I get a dialog telling me so and that I therefore need to enter an admin user name and password. When I do so I get "Invalid User name and Password" message even though the user name and password are correct admin's. I even changed them and the same thing happens. What's up?
Thanks for any help.

You may have the 'Loss of admin privileges syndrome'. The warning may not mean . the password is invalid but that it is not for what is now an admin. I and many others have had this from Leopard.
Try this, even if you have not enabled root do so now only to disable it after the exercise.
Insert the install DVD in any user. Restart holding down the 'c' key. Wait whilst the machine boots from the DVD. START (only) the install. When you have selected a language, do not proceed to install but pick fro one of the top menus the option in (utilities?) to re set password.
Choose to re set the root password. Think of a good long password with upper/ lower case letters/numbers/ and Shift+top line normal kb characters such as $.
Note said PW. Now choose from the top menus to reboot and reboot from HD. Remove DVD and login to root using PW just set.
In root go into System Preferences, choose accounts pane. Unlock the lock icon using if need be the root id and root PW. Highlight the 'errant' admin. Tick the little square box marked 'allow to administer computer, if it is not already ticked. If you have more than one admin (a good idea to have a reserve, admins can go wrong) repeat the 'tick' process with each.
Log out of root and into a normal admin. Go to directory services and you should find in the top menu and option to disable root. You did just enable it. Disable it.
My recived wisdom is it is better to have a root that has been enabled>> passworded>> disabled, than have a default of a disabled unpassworded root. It is worst to have a continuously enabled.
You now have an admin enabled to admin. If you still have a problem it may well be an invalid password. So come back.
This problem and the one of an (apparent) comnplete los of the admin account are plagueing these forums. If you hav not already done so upgrade to 10.5.2. Make sure you repair permissions before and after aqnd remove haxies first etc.

"Invalid Field Name" Error message on Client System

Hi all,
I have installed some addons on server, and the same is installed on client systems as well. on server everything works well. But when it comes to client systems, one particular form shows an error message, "Invalid Field Name", on loading the form.
I have the same .srf's as on server but still the problem persists. If anybody knows the cause of the problem, please let me know what could be the reason.
Regards,
Rohan S. Kamble.

Hi Rohan,
Are you sure you have the same version of DI (also addon) on your client and your server side?
Reinstall the addon on your client, check if the problem still happens.
Regards,
Jay.

SSMA for Sybase - Table Not Load: Invalid Column Name fill_factor

I am trying to convert from Sybase 11.5 to SQL 2005 and when I refresh from database I receive the following errors. Fill_Factor is not a column in the tables in Sybase. Any thoughts on what might be going on?
Analyzing metadata...
Converting procedure Mortality.dbo.proc_exposure_1 ...
Sybase Server Object Collector error: table : company_mortality_rate_tbl
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.
Sybase Server Object Collector error: table : study
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.
Converting procedure Mortality.dbo.proc_mortality_output ...
Sybase Server Object Collector error: table : sysindexes
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.
Sybase Server Object Collector error: table : sysindexes
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.
Sybase Server Object Collector error: table : exposure_array
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.
Sybase Server Object Collector error: table : mortality_rate_table
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.
Converting procedure Mortality.dbo.proc_study_work_1 ...
Sybase Server Object Collector error: table : study_working
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.
Sybase Server Object Collector error: table : study_working
     [Native Error code: 207]
[DataDirect ADO Sybase Provider] Invalid column name 'fill_factor'.
     Error occurred while loading content.

Hi,
Even I am getting the same error when trying to see the table structure in sybase from SSMA tool.
Sybase Server Object Collector error: table : EFTArchive_bk2
Invalid column name 'fill_factor'.
Error occurred while loading content.
I am not sure how to fix this.
This answer doesn't help me. "In SQL Server 2005 the fill_factor is spelled as FILLFACTOR." As I am
getting this error sybase database itself.
I am using SSMA to migrate data from sybase to sql. when I select the tables in sybase, I am getting
above error. (Invalid column name "fill_factor")
Could some please help me how to fix this error?

SQL Message 207, Severity 16 - Invalid Column Name

The Config Manager 2012 system seems to be very sick with SQL Message 207, Severity 16 - Invalid Column Name messages in the Management Point logs. The column is populated by NULL values. The error message in the logs suggests I refer to the
Config Man, SQL, or Knowledge Base for further details. I've looked around but I'm not really sure if this is a "repairable" problem. Has anyone seen this before and can point me in the direction to a solution? The server is a standalone
Primary.

Hi Niall and Torsten,
Installed in September of last year. Windows Server 2008 R2 Standard, SQL 2008 R2 SP2 (10.50.4000).
The text from the log reads:
Microsoft SQL Server reported SQL message 207, severity 16: [42S22][207][Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid column name 'Distinguished_Name0'.
Please refer to your Configuration Manager documentation, SQL Server documentation, or the Microsoft Knowledge Base for further troubleshooting information.
Followed by:
Discovery Data Manager failed to process the discovery data record (DDR) "D:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\adsu9110.DDR", because it cannot update the data source.
Possible cause: On a Primary site, it is probably a SQL Server problem.
Solution:
1. Review the immediately preceding status messages from this component about SQL Server errors.
2. Verify that this computer can reach the SQL Server computer.
3. Verify that SQL Server services are running.
4. Verify that the site can access the site database.
5. Verify that the site database, transaction log, and tempdb are not full.
6. Verify that there are at least 50 SQL Server user connections, plus 5 for each Configuration Manager Console.
If the problem persists, check the SQL Server error logs.
Possible cause: On a secondary site, Discovery Data Manager probably cannot write to a file on the site server, so check for low disk space on the site server.
Solution: Make more space available on the site server.
As far as I can tell the services are running, there is no disk space issue, the server can access the database, not sure about the logs or the connections.

Exception message, failed to get value, could not load managed metadata, invalid field name

Hi, i have created some site collection columns with managed metdata and taxonomy term sets. I have then created some site content types of those site columns. Some of them function properly and some don't.
When i have created or uploaded a document to the document library i start to "tag" the document by first choosing witch conent type i want too use, but when it comes to save the document it renders an error message(its not the full content
of the message):
"exception message, failed to get value, could not load managed metadata, invalid field name"
I have created some other site content types before and with the same site columns and they do not generate a error message. Is there a solution for my dilemma?

try these links:
https://prashobjp.wordpress.com/2014/02/14/failed-to-get-value-of-the-column-name-column-from-the-managed-metadata-field-type-control-see-details-in-log-exception-message-invalid-field-name-guid-site-url/
http://www.sharepointconfig.com/2011/03/issues-provisioning-sharepoint-2010-managed-metadata-fields/
http://blog.goobol.com/category/sharepoint/sharepoint-issue-troubleshooting/
http://www.instantquick.com/index.php/correctly-provisioning-managed-metadata-columns?c=elumenotion-blog-archive/random-whatnot
https://pholpar.wordpress.com/2010/03/03/taxonomy-issues/
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

Active Message When you have invalid host name in Proxy Server

I have an issue with one of our customers.
To communicate with any external parties, we have to define the host name in proxy server(Firewall).
I noticed that when we configure a WCF or HTTP adapter with an invalid host name of https url address, the messages remain active.
I am using ESB Toolkit in my implementation but I reproduced same issue using Orchestration with static port and dynamic port.
I traced the message using Fiddler and I noticed that we only have one hit with Status Code 407(407 proxy authentication required) and it is not retrying which is not a risk to my implementation. However, I consumed a web service using a console application
and I set an invalid host name for url but I noticed there are two hits in Fiddler one is 200 http status code and the second hit 407 http status code and I could catch the exception.
The question is: How to enforce BizTalk to suspend these messages or how to handle these messages?
Note that I did the followings trials but no lucks:
- I updated retry count to zero
- Delivery Notification of the Port is Transmitted
- updated closeTimeout, sendTimeout, openTimeout values
Thanks in Advance
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi Mohan,
You are getting "The remote name could not be resolved" because you are not using Proxy.
I tried to tweak on Retry Count(tried zero,1,2...). I am sure it is not retrying because there is not any network hits or packets in Fiddler or WireShark and messages stay forever.
ESB is not my issue because I reproduced same issue with a simple orchestration consuming a service with a static send port.
I have the following notes:
- In console application and Biztalk application using WireShark I can see same number and types of network packets in both cases.
- I tried to change https url to http with incorrect host name in this time retrying is working and message suspended after exceeding retry count.
- I tried to use https which is the required one with correct host name and change service name, I could see client OK Hello and server OK Hello and retying working fine and message suspended after that.
I think the issue with handshaking with proxy server because I could not see client Ok and Server ok hello when changing the host name.
There is another thread talking about an issue with active message and handshake.
https://social.technet.microsoft.com/Forums/en-US/736f0f72-ccc9-4a84-802a-7a1ff788a04a/ssl-2way-cert-incident-remains-active?forum=biztalkgeneral
But the question remains open that how we can handle this active message and why BizTalk not throwing an error?
Thanks,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Why its showing error : Invalid Object Name 'table name' when we try to insert data ?

Hi,
    When i try to insert data in the database with the following query
                con.Open();
                cmd = new SqlCommand("insert into good(ID,Name) values('" + textBox1.Text + "','" + textBox2.Text + "')", con);
                cmd.ExecuteNonQuery();
                MessageBox.Show("Insert success");
                con.Close();
    its showing following error Invalid Object Name 'good'

Use 3-part naming like: MyDatabase.dbo.good(ID,Name) .
Also consider using stored procedure for database INSERTs.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

I receive an invalid user name message in Creative Suite 2

Jeff,
I own CS2 and have had it on my Windows 7 computer until the computer crashed last week. I bought a new computer and it has Windows 8. I went to install my CS2 cds and it doesn't work. I read this thread and installed the software via the install links through my Adobe username, but Photoshop and InDesign are not working.
When I open Photoshop, I get the same "Your Photoshop username, organization, or serial number is missing or invalid. The application cannot continue and must now exit." I went to the link you gave on 3/28/14 above, but it refers to VCOM Fix-It Utilities 6 or SystemSuite 6. I have neither installed on my machine.
When I open InDesign it asks me for my serial number. I entered the number given with the CS2 download, but it doesn't work. It says "The serial number you provided is not valid. Please check your serial number and re-enter it."
I have tried to remove and reinstall several times. Please HELP!
Thank you,
Kim

Branching this to a separate discussion.
Kim you are welcome to try the steps listed in Invalid user name, organization, or serial number error | Production Studio applications (Windows).

ORA-00904: invalid column name in select query by using abstract datatype

Hi,
I had created abstract datatype as PERSON_TY and ADDRESS_TY ,
after inserting the record . i'm tryng to select the column but i got the error , even i refferd all those thing. they are given that same please look this finde me a result.
SQL> DESC PERSON_TY
Name Null? Type
NAME VARCHAR2(25)
ADDRESS ADDRESS_TY
SQL> DESC ADDRESS_TY
Name Null? Type
STREET VARCHAR2(30)
CITY VARCHAR2(25)
STATE CHAR(2)
COUNTRY VARCHAR2(15)
SQL> SELECT * FROM EMPLOYE
2 ;
EMP_CODE
PERSON(NAME, ADDRESS(STREET, CITY, STATE, COUNTRY))
10
PERSON_TY('VENKAT', ADDRESS_TY('112: BLUE MOUNT', 'CHENNAI', 'TN', 'INDIA'))
20
PERSON_TY('SRINI', ADDRESS_TY('144: GREEN GARDEN', 'THAMBARAM', 'TN', 'INDIA'))
SQL> SELECT PERSON.NAME FROM EMPLOYE
2 ;
SELECT PERSON.NAME FROM EMPLOYE
ERROR at line 1:
ORA-00904: invalid column name
regards
venki

SELECT PERSON.NAME FROM EMPLOYEIf you look in the documentation, you will see that we need to alias the table in order to make this work:
select e.person.name from employees e
/Cheers, APC
Blog : http://radiofreetooting.blogspot.com

Invalid city name; maintain table T7BRCITY Message no. HRPADBR99006

Similar Messages

Maybe you are looking for