Active Message When you have invalid host name in Proxy Server

I have an issue with one of our customers.
To communicate with any external parties, we have to define the host name in proxy server(Firewall).
I noticed that when we configure a WCF or HTTP adapter with an invalid host name of https url address, the messages remain active.
I am using ESB Toolkit in my implementation but I reproduced same issue using Orchestration with static port and dynamic port.
I traced the message using Fiddler and I noticed that we only have one hit with Status Code 407(407 proxy authentication required) and it is not retrying which is not a risk to my implementation. However, I consumed a web service using a console application
and I set an invalid host name for url but I noticed there are two hits in Fiddler one is 200 http status code and the second hit 407 http status code and I could catch the exception.
The question is: How to enforce BizTalk to suspend these messages or how to handle these messages?
Note that I did the followings trials but no lucks:
- I updated retry count to zero
- Delivery Notification of the Port is Transmitted
- updated closeTimeout, sendTimeout, openTimeout values
Thanks in Advance
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi Mohan,
You are getting "The remote name could not be resolved" because you are not using Proxy.
I tried to tweak on Retry Count(tried zero,1,2...). I am sure it is not retrying because there is not any network hits or packets in Fiddler or WireShark and messages stay forever.
ESB is not my issue because I reproduced same issue with a simple orchestration consuming a service with a static send port.
I have the following notes:
- In console application and Biztalk application using WireShark I can see same number and types of network packets in both cases.
- I tried to change https url to http with incorrect host name in this time retrying is working and message suspended after exceeding retry count.
- I tried to use https which is the required one with correct host name and change service name, I could see client OK Hello and server OK Hello and retying working fine and message suspended after that.
I think the issue with handshaking with proxy server because I could not see client Ok and Server ok hello when changing the host name.
There is another thread talking about an issue with active message and handshake.
https://social.technet.microsoft.com/Forums/en-US/736f0f72-ccc9-4a84-802a-7a1ff788a04a/ssl-2way-cert-incident-remains-active?forum=biztalkgeneral
But the question remains open that how we can handle this active message and why BizTalk not throwing an error?
Thanks,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Similar Messages

Keep gettig this error message when trying to connect to Firefox The proxy server is refusing connections.

Redownloaded Firefox and continue to get this error message when trying to connect: The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Go to Options > Advanced > Network > Connection > Settings and choose "No proxy".
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
It is important that you keep IE updated. The information included with your question, indicates that you are using IE7; you should update to IE8 for your own protection. IE9 will not be made available for Windows XP.
*http://windows.microsoft.com/en-US/internet-explorer/products/ie/home

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya

Invalid Certificate Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be used to send from your e-mail address.

Hi,
I have a problem when trying to sign emails with an X.509 certificate in Outlook 2010. I constantly get the error message. The certificate is Verified for the email address I'm sending from.
"Invalid Certificate
Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be
used to send from your e-mail address."I have no problem with signing documents in Word 2010 with the same certificate, only when trying to send email.Every check I can perform confirms that there's nothing wrong with the certificate. Yet, Outlook still says it is invalid.I have even tried installing a second X.509 for the same email address just to check. Outlook doesn't seem to like either certificate.I know this has been posted before, but I'm completely stuck here.Thanks,~Dan

Hi,
You may have checked the option "Encrypt contents and attachments for outgoing messages" in Outlook, please uncheck this to test if the problem persists.
File -> Options -> Trust Center -> Trust Center Settings -> E-mail Security -> Clear the checkbox "Encrypt contents and attachments for outgoing messages" -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library???

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library??? All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found" How can we merge them?? or how can we share all songs.. purchased or not!

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library??? All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found" How can we merge them?? or how can we share all songs.. purchased or not!

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

Hello to everyone out there: o) I have itunes 11 .. installed 1 day before, now my playlists do not agree in the presentation! itues keeps crashing! "Solution is sought. Receive message when you found solution. Itunes connect"?? Windows 7

Hello to everyone out there: o)
I have itunes 11 .. installed 1 day before, now my playlists do not agree in the presentation!
itues keeps crashing! "Solution is sought.
Receive message when you found solution. Itunes connect"??
There do not appear in itunes all devices
Windows 7
sorry for my english!

Hey, I have had my intunes soley shut down my computer numerous times, for the past month or so. I realize now it is only within my itunes, but it may not only be itunes. My desktop and a lot of cashed info have been cleared now, as a result of a ton of restarts by completely shutting the power most likely.
I have been too lazy to back up my music because it messes stuff up, and goes so slow it crashes. it will probably work better if I dont even touch itunes and just transfer small parts of my library at a time, not all 120+ gb!
I think a my computer is
           a fried
           b my files are terribly corrupted
           c or my itunes is compromised
either way, i will back up my music, but what do you think the chances are my music is the culprate, and by backing it up I will have the same problem in the future?
i've been thinking re-installing itunes would be best
let me know....thanks

This message shows up when I try to access my auxiliary iPhone library: "The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library."

This message shows up when I try to access my auxiliary iPhone library: "The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library."
What did I do wrong? I have been downloading all my photos into this same library since Janurary with no problems.

What version of Mac OS X?
Click the black Apple icon on the top left of the screen and select About This Mac. The next screen will show the information.

When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

Did you have previous versios of Outlook before you installed 2013?

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on a terminal server

Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin Shinde

Hi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support

In iphoto how to get the gold you delete a photo warning message when you check the box not ask

in iphoto how to get the gold you delete a photo warning message when you check the box not ask

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

DynDNS Invalid Host Name

I've set up an account with DynDNS. I've used their service in the past so I'm not entirely new to it. For the life of me, I cannot get my e2500 to update with DynDNS. The error I get back is "Invalid Host Name". I've put my fully qualified domain name in the field that reads "Host Name".
I have a sneaking suspicion that DynDNS is not working because the drop-down in the web interface reads "DynDNS.org". DynDNS.org redirects to dyndns.com.
For now, I think I will have to run a dyndns client on one of my computers. If anyone knows a solution, it would be much appreciated.
Thanks.
-Nate

I don't think it is not working because the drop down in the web interface reads " Dyndns.org ". You will find same option of Dyndns.org on all Linksys routers.
Enter your host name. This should be in the format of name.dyndns.org.
Run the dyndns on one of your computers and check if the host name is working.
If it is working then you can try to reset the router to factory default and reconfigure it.

Purchased apps are not in App Store anymore. Message states "You have not yet purchased any apps."

I just did a software update today and also changed my Apple ID password at the same time.
Now when I log in to the App Store, all of the apps that I previously purchased are gone.
They were there when I first went in to the store and as soon as I viewed my account information and then clicked back on the purchased tag, everything was gone and the message states "You have not yet purchased any apps."
Any suggestions?

Thanks Carolyn... I tried that but they are still not showing up. I ended up going to their support page and filled out a form with a description of the problem. I hope that I get a response soon.
Just in case, the link for the form is below.
http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=Mac%2 0App%20Store%20Account%20and%20Billing

For me, a time capsule is even safe when you have whatter damage op fire in your house. Am I wrong or is it just an additional HD like there are so maney with the only advantage that it goes automatically via your wifi for apple devices?

For me, a time capsule is even safe when you have whatter damage op fire in your house. Am I wrong or is it just an additional HD like there are so maney with the only advantage that it goes automatically via your wifi for apple devices?

Jloe,
As I have posted before, You, and others having issues with Verizon would be much better off if you complained to the FCC and FTC as well as your Senators and Congressmen. We, as individuals, have such small voices - use them where they might do the most good.
Also, don't assume that Verizon doesn't monitor these postings, they actively do & sometimes contact those that post complaints.
Sorry for your problems. GC

Active Message When you have invalid host name in Proxy Server

Similar Messages

Maybe you are looking for