Invalid date/time error

Hello everybody,
I have a problem when doing a request to an OData Service and trying to show the results in a sap.m.Table.
Sometimes I can get nullable results coming from this OData service, like:
<d:ValueDate m:type="Edm.DateTime">0000-00-00T00:00:00.0000000</d:ValueDate>
When this happens, I always get the error
2014-04-10 14:44:16 The following problem occurred: Invalid date/time value200,OK,{"d":{"results":[{"__metadata": ...
The definition of the EntityType is as follows:
<Property Name="ValueDate" Type="Edm.DateTime"/>
The property is defined like this, so I believe saying that can handle nullable values.
I am clueless of what could be the problem for that.
The error occurs in datajs.js, when executing the method invokeRequest.
Does anybody know what could be the problem?
Is this correct that I define a date as Edm.DateTime? Or should I use String instead?
Thanks,
Rafael

Rafael,
Yes, Date has to be Edm.DateTime.
I am not sure if I understood your question though. You already get the result from oData service with all zeroes. So oData service delivers data without any problem. When do you face the problem?
Thanks
Krishna

Similar Messages

Invalid date/time value error

I downloaded a trial version of Acrobat XI Pro when I try to save or edit and resave a document I get 'invalid date/time value', error. I presume it's set for the US and not the UK, can you tell me where I can change the date/time format?
I'm running on Windows 7

Hi Rave
Susan's on leave at the moment so I'm replying on her behalf in the vain hope we can sort things before she gets back and before the trial period runs out! I'm not sure I understand what you mean by column of date and time - we have a review date in the Word document before we pdf but that's all. Yes we are saving to a sharepoint server.
Thanks

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Flash IDE, Haxe & OpenFL - Invalid Data Swf Error #2136

We've recently run into a show stopping issue and can't seem to find any one else on the net who has the same problem (although there have been similar ones).
We're currently developing a game using Haxe and OpenFL. We use FlashDevelop to code the game and the official FlashIDE (CS6) to create UI/menus which is then hooked up via code in FlashDevelop. A few weeks ago the FlashIDE crashed while the FLA was being worked on. Nothing appeared to be wrong as the file opened normally, however, after building our game in FlashDevelop we received the following message "Invalid Data Swf Error #2136". Since then we've done a handful of things that will seem to fix it temporarily, but as of now, none of those solutions work. At this point we think its some sort of flash limit or an issue with OpenFL, Haxe, and FlashIDE (or some combination of).
I'd like to note that we've noticed some weird behavior - if we removed any clip the error disappears and if we add it back, the error returns.
Here's what we've tried:
recreating movie clips that were created after the crash
converting the FLA into a archive and repairing it with WinRAR
splitting the FLA into two files
copying the library into a new FLA file
Any ideas on how to fix this would be greatly appreciated!

If you found a specific clip that caused it to build or fail I'd say it's a possibility. However you mentioned in the OP that you took 'any' clip out and it works but put it back and it breaks. This really seems like a limit. Limits should be openly documented however.
Perhaps you should take a large bitmap and a complex vector and drop them in 2 different symbols. Then duplicate these symbols until you have more symbols than you currently have. Internally they will all point to the same graphics so it won't be a heavy file. Try exporting that with OpenFL and see if it's a library reference limit.
I'm sure you get what I'm getting at. If limits arent documented, you may need to stress test the libraries, languages and frameworks yourself using simple self made tests.

"The movie contains an invalid data reference" error in subscribed albums

I'm subscribed to a MobileMe album that contains movies (m4v). Just a few of these movies work well and some other will not play. I get the following error message: "The movie contains an invalid data reference". It seems that these movies are not downloaded since I can't find the original file in my iPhoto Library. For those movies without this problem I can find the original file in the iPhoto Library. It's needed to say that this problems shows up only in iPhoto since I can see all movies at the Gallery app in iPhone/iPod/iPad and also online. Any ideas?

Your profile shows you at 10.5.7. If that's correct download and run the Mac OS X 10.5.8 Combo Update. It wouldn't hurt to reapply it even if you're at 10.5.8.
Also reapply QuickTime 7.5 for Leopard and Compatibility Update for QuickTime 7.5.5.

Date & Time Error on Restart

When I restart my macbook pro, I get a date and time error message and it sets my clock back to December 31, 2000. It then doesn't remember my wi-fi settitngs and I have to manually correct the date and time. Any suggestions on how to not receive this error message at each restart and startup?

Reset the NVRAM.
About NVRAM and PRAM

Cannot Sync Date/Time Errors

Trying to sync with Exchange email. It worked fine until a few months ago. I checked with ISP and they said all my settings are correct. They said nothing has changed on their end and all the port settings and server are correct.
I have not made any changes to the OS within the time it worked and stopped working.
Error Message:
There was a problem syncing messages. Problem verifying the SSL certificate. Please ensure device date and time are accurate.
Error Details:
AirSAMStateMachine.c 453 14724
I checked the date/time on the palm and seems to be about 3-4 minutes fast. I'm assuming this is the problem. If I back the date and time up it ends up going back because it's syncing time with a server. Using US Eastern Cleveland or Washington DC gets the same results.
I can POP with gmail fine, but the exchange account is what's getting the error.
Any suggestions?

Thank you. I will follow up with Marriott's ATT rep. to get their input.

RT set date/time error

Hi all,
I have noticed that whe I use the "RT set date/time" vi to set the time on my cFP-2010 the result is 12 hours out. i.e. If it is 2:00PM, I write 14:00 to the vi, and when I read it back, it reads 2:00 AM.
Can anyone please suggest why this is occurring, and a solution?
Thanks
David

What time zone are you in and how are you reading back out the time? I believe FieldPoint
keeps GMT and if you read its time directly, i.e. view an indicator running on the controller,
it will display GMT. If you bring the timestamp back to the pc and display it there it should
be tz adjusted according to the settings on the pc.
Matt

Ix4-3004 Date & Time Error

The time cannot be syncronised to the configured time server.
When I press Date & Time a page for Axis Communications open & says AVHS Disable click to enable,
Any solution please ??
Awaiting your reply,
Thanks in Advance

Hello DGcomsys
In regards to the firmware issue you are experiencing, please contact Europe support. Further troubleshooting will need to be done to find a resolution.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Date & Time error 0271 with T-22

I've had no problems with my T-22 which was upgraded to Windows XP and additional RAM was added about a year ago. It's been running fine and had no problems until about a week ago. When I went to turn it on I got an error 0271 "check date and time settings". Since then I cannot get my computer to boot up. It will get to the point where it requires my password and when I type it in it says OK but won't go any further. I have tried everything but it won't let me into the BIOS setup utility to correct the date and time. I've downloaded diskettes and cds from the IBM website on my other computer and tried to boot up my T-22 (of course I didn't have the foresight to make a boot disk or cd) and tried the commercial softwarre such as Professional Mechanic, etc. but nothing works. Does anyone have any ideas?

Just removing the battery will do nothing to reset the systemboard remove the laptop battery and also the CMOS battery than with no power cord installed hold the power button for 30 seconds do this 3 times and the system is reset. EZ-Serv will tell you the same thing but for time and data error I stand by replacing the cmos

Invalid data format error for CLOB

I am trying to migrate a piece of code from WLS 8.1.2 to WLS 8.1.5.
WLS 8.1.2 has ojdbc14.jar with version "Oracle JDBC Driver version - 9.0.2.0.0"
WLS 8.1.5 has ojdbc14.jar with version "Oracle JDBC Driver version - 10.1.0.4.0"
In the older version, I am storing an encrypted string value in a clob and saving in the db.
When I try the same in the new code, it displays an error that the data is not of the proper format.
If I read any data entered using the older application, in the new one, it is still valid.
But, if I enter a new value using WLS 8.1.5, only those are invalid.
I even tried deploying the application with the old and new ojdbc14.jar files with it. In either case, it still gives an error. If I use the later version of ojdbc14.jar, the method getAsciiStream() is deprecated.
How can I make my code independent of the version of ojdbc14.jar and store and read the clob?

Rohit B wrote:
I am trying to migrate a piece of code from WLS 8.1.2 to WLS 8.1.5.
WLS 8.1.2 has ojdbc14.jar with version "Oracle JDBC Driver version - 9.0.2.0.0"
WLS 8.1.5 has ojdbc14.jar with version "Oracle JDBC Driver version - 10.1.0.4.0"
In the older version, I am storing an encrypted string value in a clob and saving in the db.
When I try the same in the new code, it displays an error that the data is not of the proper format.
If I read any data entered using the older application, in the new one, it is still valid.
But, if I enter a new value using WLS 8.1.5, only those are invalid.
I even tried deploying the application with the old and new ojdbc14.jar files with it. In either case, it still gives an error. If I use the later version of ojdbc14.jar, the method getAsciiStream() is deprecated.
How can I make my code independent of the version of ojdbc14.jar and store and read the clob?Hi. You are suffering with the evolution of Oracle's driver. If you can make a standalone
program that contains some data, inserts it and extracts it an compares it and proves
the bug, we can open a case with Oracle. In general you want to use their latest driver,
but if you can't keep up with their bugs/fixes, you can always keep using the same version
of the driver everywhere. The way to do that is not to put the driver in you packages,
but simply to keep the version you want in the weblogic installation's server\lib
directory (ojdbc14.jar)
Joe

Date & Time Error

Uhmm does anyone know how to disable time change when I connect my iPod Touch to iTunes? i mean everytime i connect to iTunes my iPod always changes its time like its giving me an 8 hour gap. My time in my pc is correct even my time zone.. so.. any advice? thanks.

lol you'd be surprised how many people have it set for a country they've never been never mind lived it. ;D
It could be something to do with the clock error on the iOS4 try and update to the 4.2 and see what happens then.

Invalid Date Code Error in DBI

Hi i'm working on oracle EBS ERP R12
i make a report in oracle DBI [Generated Data Source] using Scott/Tiger schema's table EMP
in EMP table the hiredate values below the 1995 year.. but i insert 3 -4 records manually and the hiredate value above 2005
but when ever i create a report in DBI the error code generate like dis
TIME_FK--------------01-jan-92
TIME_FK-------------01-jan-81if i omit those values which is below1995 year hiredate then it works fine..
please help me out why DBI doesnot pic older dates?

Sorry, looks like it got posted in a wrong section of the support forum

Date / Time Error on SPA3102 after upgrade to SW version: 5.1.7(GW)

After upgrading the software of my SPA's date and time is stuck on:
Current Time: 1/1/2003 12:10:11and can therfore not register. I tried changing to several NTP ie: time.nist.gov or ntp.sipgate.net but nothing gives.
Anu suggestions how to solve this problem?
Solved!
Go to Solution.

make sure that the device is on the internet or that it is getting DNS server addresses.
also you can try to point it to a local computer IP address to use its time.

SRW2008 Date/Time error

Everytime I reset my siwtch, the date and time change to: 17:00:00 Dec 31, 2099
The firmware is 1.0.4
I've tried using SNTP and system time, but neither seems to work. Whenever the switch loses power the time has to be reset!
Solved!
Go to Solution.

I believe this should not happen. Try re-flashing the firmware of the switch and see if you still have the same problem. You can download the firmware on this link:
http://www.cisco.com/en/US/products/ps9971/index.html
Other than this, I suggest contacting CISCO tech support to further look into your problem. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support:
http://www.cisco.com/web/products/linksys/index.html

Invalid date/time error

Similar Messages

Maybe you are looking for