Invalid Version Error

Using Livecycle, I have sucessfully made changes to my form in the past (an older form originaly created in Acrobat). Today I added a page, everything looked good til I went to save. Message error was "failed to save to the file". When I opened the Report Palette, I got the following error:
Generating PDF Document....Invalid version; the current version of the XFA template model exceeds the capability of Actobat/Adobe Reader 7.0.5 PDF generated sucessfully. Unable to open or create file F;\data\business development\etc...
Permission denied.
2 warnings\errors reported.
I've never had issue w/ this. Granted an older form but I am operating on Acrobat Adobe 9 Pro w/ Livecyle designer. Any fix it's out there? I lost my new nice added page :(

If you encounter the following error using LiveCycle Output ES there is a very simple solution.
<Warning> <com.adobe.document.XMLFormService> <000000> <$$$/com/adobe/document/xmlform/msg.XFA=Invalid version: The current version of the XFA template model exceeds the capability of Acrobat / Adobe Reader 7.>
This indicates that you have told LiveCycle Output to generate a document that is usable by Reader 7, although your form template you built with LiveCycle Designer specifies that this template is targeted for a later version of Reader in my case the target is Reader 7.0.5.
This can easily occur because LiveCycle Designer’s default target version is 7.0.5, and lots of people specify “7.0 or later” as the target in the process designer in LiveCycle Workspace. Attached is a graphic to help understand the problem and the solution.

Similar Messages

Invalid Version error in Nokia 3230

Hai,
I am new to this J2ME Technology. The new J2ME application works fine when I installed in Nokia 6630 & Nokia 6021. But when I tried to install in Nokia 3230 the mobile gives an error "Invalid Version".
Kindly help me in solve this problem.
Regards
ackumar

Most likely, you have compiled it for cldc 1.1 - the 3230, unfortunately, only supports cldc 1.0.
http://j2mepolish.org/devices/devices-vendor.html#Nokia - might provide some additional insights.
Cheers.

"Invalid DOS version" error message when installing Tomcat in Windows98

I tried to install Tomcat 5.0 in Windows 98. At first, it produced "Out of Environment Space" error message. I then changed the "Initial Environment" from Auto to other values (bigger than 2816) for both startup.bat and shutdown.bat.
When I restarted the Tomcat, it produce "Invalid DOS version" error message. I thought about updating the DOS but previously when I had WinXP installed in computer, I couldn't access to the server due to the dos version issue.
Is there any way to handle this? I would really appreciate the help:) Thank you very much..

no, use the serial number listed on the page where you downloaded acrobat 7, not your acrobat serial number

Invalid verson error installing EM 10202 to 11G DB version as repository

I am trying to install 10202 em with -noconfig option to a existing db. Then I plan on installing the 10204 patch and finish the install. My db version is 11.1.0.6 which certify says is supported with EM 10204.
ERROR MESSAGE IS:
SEVERE: Invalid version: To be used for the Management Repository, the database must be version 9.2.0.6.0, or version 10.1.0.3.0 or higher.
I can't figure out which which pre-req needs to be changed! I have searched Metalink extensively.
I am following the recommendation in the 10204 Readme.
Message was edited by:
user586233

To use 11G database as repository for 10204 oms,
what we need to do here ?
) Install 10.2.0.1 oms by pointing to supported
repository for 10201GC in software-only mode
./runInstaller -noconfig
2) Install 10.2.0.4 patchset in software-only mode
3) Run config assistants for base install
4) Run config assistants for patchset
5) stop all the opmn, ias control, agent
6) upgrade the database to 11G
lease refer the section 'Installing Software-Only and
Configuring Later'
http://download.oracle.com/docs/cd/B16240_01/doc/em.10
2/e10953/installing_em.htm#CCHGBDCBYes I have reviewed these notes. I was trying to start out with 11G ora home. I only have a little disk as this is my test box/laptop. To do above is several hours of work.
I found bug 6115708 and it says it is fixed in M5 whatever that is.

Missing or invalid version of SQL library PSORA (200,0)

I am trying to configure App. Server on Vista laptop machine.
The machine name is VRGhati03.
It is a logical 3 tier archtecture. Its a EPM 9.0 Install. My database (PFDMO) is all configured and I am able to signon using a User ID VP1 and password VP1. My connect id is people with password of peop1e.
My access id is SYSADM.
I have created a user id in Oracle as VP1 and granted him the PSADMIN role .
When I try to boot up the App. Server it tells me ' Missing or invalid version of SQL Library PSORA' and 'Could not sign on to database PFDMO with user VP1'
The VP1 sign on works via SQLPLUS.
I also created a User Account of VP1 and tried to boot the appserver under that id but still no success.
I have gone thru some of the postings on this topic but they have not helped me. What am I doing wrong?
Below are the details of the log files, portion of my psappserv.cng file and the system environment variables.
Can somebody help. Thanks in advance
Sudhir
I) Log from APPSERV:
PSADMIN.10000 (0) [08/05/09 09:19:24](0) Begin boot attempt on domain PFDMO
PSWATCHSRV.2556 (0) [08/05/09 09:19:33] Checking process status every 120 seconds
PSWATCHSRV.2556 (0) [08/05/09 09:19:33] Server started
PSAPPSRV.5636 (0) [08/05/09 09:19:34](0) PeopleTools Release 8.49 (WinX86) starting
PSAPPSRV.5636 (0) [08/05/09 09:19:34](0) Cache Directory being used: C:\PT8.49\appserv\PFDMO\CACHE\PSAPPSRV_2\
PSAPPSRV.5636 (0) [08/05/09 09:19:34](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSAPPSRV.5636 (0) [08/05/09 09:19:34](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PFDMO with user VP1.
PSAPPSRV.5636 (0) [08/05/09 09:19:34](0) Server failed to start
PSWATCHSRV.2556 (0) [08/05/09 09:19:35] Shutting down
PSADMIN.10000 (0) [08/05/09 09:19:41](0) End boot attempt on domain PFDMO
II) Log from TUXLOG:
091924.VRGHATI03!PSADMIN.10000: Begin attempt on domain PFDMO
091927.VRGHATI03!tmadmin.9844.8684.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
091929.VRGHATI03!tmboot.9720.8272.-2: 08-05-2009: Tuxedo Version 9.1, 32-bit
091929.VRGHATI03!tmboot.9720.8272.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 60 seconds
091929.VRGHATI03!tmboot.9720.8272.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
091931.VRGHATI03!BBL.8340.3320.0: 08-05-2009: Tuxedo Version 9.1, 32-bit, Patch Level 036
091931.VRGHATI03!BBL.8340.3320.0: LIBTUX_CAT:262: INFO: Standard main starting
091933.VRGHATI03!tmboot.9224.8412.-2: 08-05-2009: Tuxedo Version 9.1, 32-bit
091933.VRGHATI03!tmboot.9224.8412.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 60 seconds
091933.VRGHATI03!tmboot.9224.8412.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
091933.VRGHATI03!PSWATCHSRV.2556.9492.-2: 08-05-2009: Tuxedo Version 9.1, 32-bit
091933.VRGHATI03!PSWATCHSRV.2556.9492.-2: LIBTUX_CAT:262: INFO: Standard main starting
091934.VRGHATI03!PSAPPSRV.5636.9008.0: 08-05-2009: Tuxedo Version 9.1, 32-bit
091934.VRGHATI03!PSAPPSRV.5636.9008.0: LIBTUX_CAT:262: INFO: Standard main starting
091934.VRGHATI03!PSAPPSRV.5636.9008.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
091934.VRGHATI03!tmboot.9224.8412.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
091938.VRGHATI03!BBL.8340.3320.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
091941.VRGHATI03!PSADMIN.10000: End boot attempt on domain PFDMO
III) System Environmental Variables:
LIBPATH=c:\oracle\product\10.2.0\db_1\LIB
ORACLE_SID=PFDMO
OS=Windows_NT
path=C:\oracle\product\10.2.0\db_1\bin;C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\product\10.1.3.1\OracleAS_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLShared\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\bea\Tuxedo9.1\bin
TUXDIR=C:\bea\Tuxedo9.1
IV) psappserv.cfg File:
[Startup]
;=========================================================================
; Database Signon settings
;=========================================================================
DBName=PFDMO
DBType=ORACLE
UserId=VP1
UserPswd=tRWpMM0Cragi9I0nrWPAxZ+GS1YD0PRXzCrF4YWbe5E=
ConnectId=people
ConnectPswd=kyD3QPxnrag=
ServerName=VRGhati03
[Database Options]
;=========================================================================
; Database-specific configuration options
;=========================================================================
SybasePacketSize=
UseLocalOracleDB=0
;ORACLE_SID=
EnableDBMonitoring=1
OracleDisableFirstRowsHint=0
[Security]
;=========================================================================
; Security settings
;=========================================================================
Validate Signon with Database=0
[Workstation Listener]
;=========================================================================
; Settings for Workstation Listener
;=========================================================================
Address=%PS_MACH%
Port=7000
Encryption=0
Min Handlers=1
Max Handlers=3
Max Clients per Handler=40
Client Cleanup Timeout=60
Init Timeout=5
Tuxedo Compression Threshold=5000
[JOLT Listener]
;=========================================================================
; Settings for JOLT Listener
;=========================================================================
Address=%PS_MACH%
Port=9000
Encryption=0
Min Handlers=5
Max Handlers=7
Max Clients per Handler=40
Client Cleanup Timeout=10
Init Timeout=5
Client Connection Mode=ANY
Jolt Compression Threshold=1000000
[JOLT Relay Adapter]
;=========================================================================
; Settings for JOLT Relay Adapter (JRAD)
;=========================================================================
Listener Address=%PS_MACH%
Listener Port=9100
[Domain Settings]
;=========================================================================
; General settings for this Application Server.
;=========================================================================
Domain ID=PFDMO
Add to PATH=c:\oracle\product\10.2.0\db_1\BIN
Spawn Threshold=1,600:1,1
Restartable=Y
;Log Directory=%PS_SERVDIR%\LOGS
; This allows for dynamic changes to certain setting without having to reboot
; the domain. The settings that can be dynamically changed are: Recycle Count,
; Consecutive Service failures, Trace SQL, Trace Mask SQL, TracePC, TracePCMask,
; TracePpr, TracePprMask, TracePIA, TracePIAMask, Log Fence, Enable DB Monitoring,
; Enable Debugging, LogErrorReport, MailErrorReport, DumpMemoryImageAtCrash
; These settings are further identified by the "Dynamic change allowed for .."
; comment.
Allow Dynamic Changes=N
; Logging detail level
; Level Type of information
; -100 - Suppress logging
; -1 - Protocol, memory errors
; 0 - Status information
; 1 - General errors
; 2 - Warnings
; 3 - Tracing Level 1 (default)
; 4 - Tracing Level 2
; 5 - Tracing Level 3
; Dynamic change allowed for LogFence
LogFence=3
; Trace-Log File Character Set: Character set used for log and trace files
Trace-Log File Character Set=ANSI
[PeopleCode Debugger]
;=========================================================================
; PeopleCode Debug Server settings
;=========================================================================
PSDBGSRV Listener Port=9500
; PeopleCode Debugger Trace Settings
; Level Type of tracing
; 0 Off (default)
; 1 Level 1 - log connection activity
; 2 Level 2 - log debug broker transactions (getsession, register/unregister, acquire/unacquire)
; 3 Level 3 - log primary debuggee/debugger transactions (register, modechange, seteventflag, break)
; 4 Level 4 - log debuggee/debugger variables transactions
; 5 Level 5 - log debuggee/debugger command responses and gotbreaks
; Warning: Levels 3 thru 5 result in lots of transaction data being logger and require plenty of disk space.
DebuggerMsgLogEnable=0
[Trace]
;=========================================================================
; Server Trace settings
;=========================================================================
; SQL Tracing Bitfield
; Bit Type of tracing
; 1 - SQL statements
; 2 - SQL statement variables
; 4 - SQL connect, disconnect, commit and rollback
; 8 - Row Fetch (indicates that it occurred, not data)
; 16 - All other API calls except ssb
; 32 - Set Select Buffers (identifies the attributes of columns
; to be selected).
; 64 - Database API specific calls
; 128 - COBOL statement timings
; 256 - Sybase Bind information
; 512 - Sybase Fetch information
; 1024 - SQL Informational Trace
; 4096 - Manager information
; 8192 - Mapcore information
; Dynamic change allowed for TraceSql and TraceSqlMask
TraceSql=0
TraceSqlMask=12319
; PeopleCode Tracing Bitfield
; Bit Type of tracing
; 1 - Trace Evaluator instructions (not recommended)
; 2 - List Evaluator program (not recommended)
; 4 - Show assignments to variables
; 8 - Show fetched values
; 16 - Show stack
; 64 - Trace start of programs
; 128 - Trace external function calls
; 256 - Trace internal function calls
; 512 - Show parameter values
; 1024 - Show function return value
; 2048 - Trace each statement in program (recommended)
; Dynamic change allowed for TracePC and TracePCMask
TracePC=0
TracePCMask=4095
; Panel Processor Tracing Bitfield
; Bit Type of tracing
; 1 - Log extra debug messages
; 2 - Dump panel after build
; 4 - Dump buffers after PPRInit
; 8 - Dump buffers before/after service
; 16 - Dump buffers after scrollselect
; 32 - Dump buffers after modal panel
; 64 - Dump buffers before save
; 128 - Dump buffers after insertrow
; 256 - Trace default processing
; 512 - Dump PRM data
; 1024 - Show function return value
; 2048 - dump memory statistics
; 4096 - Trace related display processing
; 8192 - Trace keylist generation
; 16384 - Trace work record settings
; Dynamic change allowed for TracePPR and TracePPRMask
TracePPR=0
TracePPRMask=32767
; PIA Page Generation Tracing Bitfield
; Bit Type of tracing
; 1 - Log page generation errors
; 2 - Show table layout via cell borders in generated page
; 4 - Annotate field overlap in HTML source
; 8 - Detailed trace of table generation algorithm
; 16 - Inline stylesheet in generated pages
; 32 - Inline javascript in generated pages
; 64 - QATesting - annotation and extra tags needed by Robot
; 128 - Format source. Make HTML more readable
; 256 - Save File. Save each generated page in log directory
; 512 - Debug JavaScript. Include debug functions in page
; 1024 - Log form data. Log all request parameters on each service
; 2048 - Log key errors. Write log message for unrecognized query parameters.
; Dynamic change allowed for TracePIA and TracePIAMask
TracePIA=0
TracePIAMask=32767
; AE Tracing Bitfield
; Bit Type of tracing
; 1 - Trace STEP execution sequence to AET file
; 2 - Trace Application SQL statements to AET file
; 4 - Trace Dedicated Temp Table Allocation to AET file
; 8 - not yet allocated
; 16 - not yet allocated
; 32 - not yet allocated
; 64 - not yet allocated
; 128 - Timings Report to AET file
; 256 - Method/BuiltIn detail instead of summary in AET Timings Report
; 512 - not yet allocated
; 1024 - Timings Report to tables, ignored if Process Instance is 0
; 2048 - DB optimizer trace to file
; 4096 - DB optimizer trace to tables
; 8192 - Transform trace
TraceAE=0
; Analytic Server Tracing Bitfield
; MostSignificantBit -> LeastSignificantBit
; QAS |ACE MODEL | ACE CALC | ACE API| Plugin | DCache | Utils | Analytic Server |
; 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
; Bit Type of tracing 3 bits per component (octal word)
; 1 - Analytic Server LSB
; 2 - Analytic Server MSB LSB LogFence
; 4 - Analytic Server MSB --- --- --------------------
; 8 - Utilities LSB 0 0 0 0 (Severity_Status)
; 16 - Utilities 0 0 1 1 (Severity_Error)
; 32 - Utilities MSB 0 1 0 2 (Severity_Warn)
; 64 - DataCache LSB 0 1 1 3 (Severity_Info)
; 128 - DataCache 1 0 0 4 (Severity_Trace1)
; 256 - DataCache MSB 1 0 1 5 (Severity_Trace2)
; 512 - Plug-in LSB 1 1 0 6 (not used)
; 1024 - Plug-in 1 1 1 7 (not used)
; 2048 - Plug-in MSB
; 4096 - ACE API LSB
; 8192 - ACE API
; 16384 - ACE API MSB
; 32768 - ACE CALC LSB
; 65536 - ACE CALC
; 131072 - ACE CALC MSB
; 262144 - ACE MODEL LSB
; 524288 - ACE MODEL
; 1048576 - ACE MODEL MSB
; 2097152 - QAS LSB
; 4194304 - QAS
; 8388608 - QAS MSB
; The bits enable logging for OptEngine components beyond the standard
; LogFence setting. E.g., TraceAnalytic=14380470 sets full trace on all components.
; Using 110 (1 greater than Severity_Trace2) for each component:
; OptEng: 4 + 2
; Utils : 32 + 16
; DC : 256 + 128
; Plugin: 2048 + 1024
; ACE API: 16384 + 8192
; ACE CALC: 131072 + 65536
; ACE MODEL: 1048576 + 524288
; QAS : 8388608 + 4194304
; Total : 14380470
TraceAnalytic=9586980
TraceAnalyticMask=16777215
; Performance Monitor Tracing Bitfield
; Bit Type of tracing
; 1 - Trace All performance monitor agent activity
TracePPM=0
; Create a memory image of the failing process during a crash
; Setting Meaning
; NONE no memory image
; MINI mini memory image
; FULL full memory image
; If set to MINI or FULL, when a crash occurs, a memory.dmp file is
; generated under <log directory>/<server name>.<process id>.
; Dynamic change allowed.
DumpMemoryImageAtCrash=NONE
;If set to Y, when a crash occurs, the application server process will write
;additional information to help in debugging the crash that occurred.
;This consists of the customized object definitions for reproducing
;the request on another database.
DumpManagerObjectsAtCrash=Y
; If set to Y, when a runtime error is detected, the message and a dump of
; the application state will be written to the current log file.
; Dynamic change allowed.
LogErrorReport=N
; When set to an email address, an email will be sent when an error report
; or a crash dump is written to the log.
; Dynamic change allowed.
MailErrorReport=
[Cache Settings]
;==============================================================================================
; Settings for managed object caching;
; Default EnableServerCaching=2, ServerCacheMode=0
; Default CacheBaseDir=%PS_SERVDIR% if defined else %PS_HOME/<domain name>/cache
; You can change these values by uncommenting and setting to the desired value
;==============================================================================================
; EnableServerCaching -
; 0 Server file caching disabled
; 1 Server file caching limited to most used classes
; 2 Server file caching for all types
;EnableServerCaching=2
; CacheBaseDir = the base file cache directory
;CacheBaseDir=%PS_SERVDIR%
; ServerCacheMode
; 0 One file cache directory per app server process
; 1 One file cache directory per domain (shared file cache, needs to be preloaded)
;ServerCacheMode=0
; Deprecated cache settings : MaxInMemoryObjects
; MaxCacheMemory - controls cache memory pruning
; 0 cache memory pruning disabled
; >0 max size of memory cache in MBytes
MaxCacheMemory=0
; Preload Cache projects for file and in memory cache
;PreloadFileCache=
;PreloadMemoryCache=
[RemoteCall]
;=========================================================================
; Settings for RemoteCall
;=========================================================================
; RemoteCall child process output redirection
; If this parameter is non-zero, the child process output is saved to
; <Domain Settings\Log Directory>\<program>_<oprid>.out, and any error
; output is saved to <program>_<oprid>.err.
; By default, the output is not saved
RCCBL Redirect=0
; Location of COBOL programs
; NT/Windows 2000: By default, RemoteCall looks for the COBOL programs in
; %PS_HOME%\cblbin%PS_COBOLTYPE%. PS_COBOLTYPE is automatically set when
; the application server is started. The value depends upon the database.
; Possible values:
; PS_COBOLTYPE = A (non-Unicode)
; PS_COBOLTYPE = E (EBCDIC)
; PS_COBOLTYPE = U (Unicode)
; UNIX: By default, RemoteCall looks for the COBOL programs in $PS_HOME/cblbin.
; You can override the default setting by commenting out the appropriate
; line and modifying the setting to fit your requirements.
; NT/Windows 2000:
;RCCBL PRDBIN=%PS_HOME%\cblbin%PS_COBOLTYPE%
; UNIX:
;RCCBL PRDBIN=%PS_HOME%/cblbin
[PSAPPSRV]
;=========================================================================
; Settings for PSAPPSRV
;=========================================================================
; UBBGEN settings
Min Instances=3
Max Instances=3
Service Timeout=300
; Number of services after which PSAPPSRV will automatically restart.
; If the recycle count is set to zero, PSAPPSRV will never be recycled.
; The default value is 5000.
; Dynamic change allowed for Recycle Count
Recycle Count=5000
; Percentage of Memory Growth after which PSAPPSRV will automatically restart.
; Default is 20, meaning additional 20% of memory growth after the process has
; built up its memory cache.
; Uncomment the setting to use memory growth instead of Recycle Count at
; determining the restart point.
; Percentage of Memory Growth=20
; Number of consecutive service failures after which PSAPPSRV will
; automatically restart.
; If this is set to zero, PSAPPSRV will never be recycled.
; The default value is zero.
; Dynamic change allowed for Allowed Consec Service Failures
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Default is 5000KB. Use 0 for no limit.
Max Fetch Size=5000
; Automatically select prompt, 1 = yes, 0 = no
Auto Select Prompts=1
; This parameter is used for Tuxedo Queue Thresold Determination (used forPub/Sub
; processing only). This parameter is the actual Tuxedo message queue size.
; This is a kernel parameter in Unix. For Windows, look in BEA Tuxedo, IPC Resources.
; A value of 0 will disable Tuxedo Queue threshold Determination and usage.
; A value of -1 will use these defaults: Windows = 65535, AIX = 4000000,
; Solaris = 65535, HP = 65535
Tuxedo Queue Size=65535
[PSANALYTICSRV]
;=========================================================================
; Settings for PSANALYTICSRV
;=========================================================================
; UBBGEN settings
Min Instances=3
Max Instances=3
; Number of Analytic Instances an Analytic Server instance will load and
; unload before recycling. If the recycle count is set to zero, the
; Analytic Server will never be recycled.
; The default value is 1.
; Dynamic changes to this setting are allowed. A dynamic change will
; affect running Analytic Servers.
;Recycle Count=1
; Number of minutes an analytic instance will remain loaded without being
; accessed when it is auto-loaded by the analytic grid or when a
; PeopleCode program loads the instance with a timeout value of -1.
; The default value is 30
; Setting this to zero will disable timeouts for auto-loaded instances.
; Dynamic changes to this setting are allowed.
;Analytic Instance Idle Timeout=30
; Setting this to 1 will cause each analytic server to log to it's own
; file rather than the common PSANALYTICSRV_<Month|Day>.LOG file. The
; individual log files will include the Tuxedo server ID.
; Dynamic changes to this setting are allowed. Changes will only come
; into affect for running analytic servers when they are recycled.
; The default value is 0
;Analytic Per Server Log=1
; This setting determines what is the threshold to enable file swaping
; in ACE. Each data block is of 6K. Each data cube is divided into multiple
; data blocks. In batch environment this could be configured to a higher value.
; The default value is 1024 blocks. If set to zero, the disk swaping is disabled.
;ACE Max Memory Data Blocks=1024
; Queue size for data loading in batches. If set to zero, batch loading is disabled.
;ACE Load Queue Size=100000
[PSSAMSRV]
;=========================================================================
; Settings for PSSAMSRV
;=========================================================================
; UBBGEN settings
; PSSAMSRV never spawns, so we set Instances instead of setting a Min and
; Max value for Instances.
Min Instances=1
Max Instances=3
Service Timeout=300
; Number of services after which PSSAMSRV will automatically restart.
; If the recycle count is set to zero, PSSAMSRV will never be recycled.
; The default value is zero.
Recycle Count=100000
; Number of consecutive service failures after which PSSAMSRV will
; automatically restart.
; If this is set to zero, PSSAMSRV will never be recycled.
; The default value is zero.
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Max Fetch Size=n indicates n * 1024 bytes
; Default is 32KB. Use 0 for no limit
Max Fetch Size=32
[PSQCKSRV]
;=========================================================================
; Settings for PSQCKSRV
;=========================================================================
; UBBGEN settings
Min Instances=1
Max Instances=3
Service Timeout=300
; Number of services after which PSQCKSRV will automatically restart.
; If the recycle count is set to zero, PSQCKSRV will never be recycled.
; The default value is zero.
Recycle Count=100000
; Number of consecutive service failures after which PSQCKSRV will
; automatically restart.
; If this is set to zero, PSQCKSRV will never be recycled.
; The default value is zero.
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Default is 5000KB. Use 0 for no limit.
Max Fetch Size=5000
[PSQRYSRV]
;=========================================================================
; Settings for PSQRYSRV
;=========================================================================
; UBBGEN settings
Min Instances=1
Max Instances=3
Service Timeout=1200
; Number of services after which PSQRYSRV will automatically restart.
; If the recycle count is set to zero, PSQRYSRV will never be recycled.
; The default value is zero.
Recycle Count=100000
; Number of consecutive service failures after which PSQRYSRV will
; automatically restart.
; If this is set to zero, PSQRYSRV will never be recycled.
; The default value is zero.
Allowed Consec Service Failures=2
; Max Fetch Size -- max result set size in KB for a SELECT query
; Default is 10000KB. Use 0 for no limit.
Max Fetch Size=10000
; Use dirty-read(uncommitted read) for PSQRYSRV only on DB2/OS390 or SQL Server
Use dirty-read=0

VP1 is an application user, not a database user.
PS is a database user, the Peoplesoft objects' owner. It is also an application user on some application.
Did you try to connect onto the database with people user through SQL*Plus ? Are you able to read PSOPRDEFN, PSVERSION, PSACCESSPRFL tables ?
What Vista version are you on ? What Oracle version ?
If you have Metalink3 access, you should read the note :
Missing or invalid version of SQL library libpsora (0,0) or (200,0) (Doc ID 608741.1)+
Nicolas.

Youtube Facebook Google etc, Invalid URL error

For many years now I've been putting up with a CONSTANT lingering problem with my Mac OS. These (on a very regular basis) irritating, "Invalid URL" errors.
The picture that you see below is an example of my problem. This example of a Youtube video giving me an error is from a recent article on www.macrumors.com.
Where the youtube video is supposed to be is just an Error. And as I scrolled down the page, all of the subsequent youtube videos had this same error.
So I went to youtube. After typing in the web address, I get the same error except that it fills the entire screen.
After about 20 minutes (of constant screen refreshes and data dumps within safari) the youtube videos finally loaded as if nothing was wrong (as you can see in the second photo).
Sometimes this problems lasts for 10 seconds. But normally it can take between 10 minutes to an hour to begin working again.
The other two websites that give me this same trouble is Google.com and Facebook.com. But Facebook being the most notorious. Not just because my actual facebook page won't load, but because of all of the news sites that load facebook garbage and coding searching for facebook. When the facebook ip address cannot be resolved, these annoying error pop-ups begin bombarding my screen. One minute facebook will work, and I'm reading down the newfeed, then all of the sudden nothing new will load. When I try to refresh the page, I get an error stating that it cannot load the page. Then I just have to wait.
As you can see from the picture below, Sometimes facebook just gives me an error that states, "Safari cannot open the page Facebook.com because Safari cannot establish a secure connection to the facebook server."
This happens EVERY single day. It's really just a crap-shoot whether or not I will be able to get onto Facebook.
Youtube is a little less often (usually happening about 3 or 4 times per week).
Google got so bad that I finally had to change my search provider to Bing, because Google almost never worked.
Has anyone else experienced these problems on their MAC?
I ask because I have 3 MAC computers. 2 Laptops and a MacPro tower.
And EVERY single one has this same problem.
This wasn't such a big deal; ie something I learned to live with... Up until I bought my wife (and Windows Vista convert) her new Macbook Air. And within an hour of booting that thing up for the first time, her Facebook errored out. And has done it pretty consistantly every day, at least twice, since then.
If anyone else has this problem, how did you fix it????????

Here are the results:
I hope someone can make heads or tails out of this.
And please keep in mind that in the past I have completely wiped and reinstalled after reformatting and within an hour or 2 I get the same errors on the these websites.
Start time: 23:05:23 06/15/14
Model Identifier: MacBookPro5,5
System Version: OS X 10.9.3 (13D65)
Kernel Version: Darwin 13.2.0
Boot Mode: Normal
Time since boot: 49 minutes
FileVault: FileVault master keychain appears to be installed
Diagnostic reports
   2014-05-19 UserEventAgent crash
   2014-05-23 qmasterqd crash
   2014-05-26 qmasterqd crash
   2014-06-02 DivX Player crash
   2014-06-02 PluginProcess crash
   2014-06-02 com.apple.WebKit.WebContent crash
   2014-06-02 com.apple.WebKit.WebContent crash
   2014-06-02 com.apple.WebKit.WebContent crash
Log
   Jun 13 01:43:18 AFP_VFS afpfs_dead: called on vfsid 4
   Jun 13 01:43:18 ASP_TCP CancelPendingReqsWithID : Adding the invalid vfsid 4 and counter is 0 to the list
   Jun 13 01:43:18 ASP_TCP CancelOneRequest: cancelling slot 15 error 89 reqID 2801 flags 0x29 afpCmd 0x45 so 0xffffff801586fca0
   Jun 13 01:43:18 ASP_TCP CancelOneRequest: cancelling slot 16 error 89 reqID 2802 flags 0x29 afpCmd 0x22 so 0xffffff801586fca0
   Jun 13 01:43:18 ASP_TCP CancelOneRequest: cancelling slot 17 error 89 reqID 2803 flags 0x29 afpCmd 0x22 so 0xffffff801586fca0
   Jun 13 01:43:18 ASP_TCP CancelOneRequest: cancelling slot 18 error 89 reqID 2804 flags 0x29 afpCmd 0x22 so 0xffffff801586fca0
   Jun 13 22:40:53 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Storagedisk_6_1TB
   Jun 13 22:41:28 AFP_VFS afpfs_dead: called on vfsid 3
   Jun 13 22:41:28 ASP_TCP CancelPendingReqsWithID : Adding the invalid vfsid 3 and counter is 0 to the list
   Jun 13 22:41:28 ASP_TCP CancelOneRequest: cancelling slot 20 error 89 reqID 10889 flags 0x29 afpCmd 0x22 so 0xffffff802230a058
   Jun 13 22:41:28 ASP_TCP CancelOneRequest: cancelling slot 21 error 89 reqID 10890 flags 0x29 afpCmd 0x22 so 0xffffff802230a058
   Jun 13 23:26:04 process Preview[95635] caught causing excessive wakeups. Observed wakeups rate (per sec): 744; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45020
   Jun 14 00:16:15 process Preview[2207] caught causing excessive wakeups. Observed wakeups rate (per sec): 2593; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45020
   Jun 14 00:17:23 process Preview[2339] caught causing excessive wakeups. Observed wakeups rate (per sec): 1991; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45210
   Jun 14 02:45:19 process QuickLookUIHelpe[4321] caught causing excessive wakeups. Observed wakeups rate (per sec): 189; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45586
   Jun 15 00:44:53 msdosfs_fat_uninit_vol: error 6 from msdosfs_fat_cache_flush
   Jun 15 00:46:08 jnl: disk3s1: replay_journal: from: 283136 to: 1024512 (joffset 0x7a000)
   Jun 15 00:46:12 jnl: disk3s1: journal replay done.
   Jun 15 01:37:24 jnl: disk3s1: do_jnl_io: strategy err 0x6
   Jun 15 01:37:24 jnl: disk3s1: write_journal_header: error writing the journal header!
   Jun 15 01:37:24 jnl: disk3s1: close: journal 0xffffff8013ac5c20, is invalid. aborting outstanding transactions
   Jun 15 01:37:26 jnl: disk3s1: replay_journal: from: 367616 to: 1361408 (joffset 0x3f000)
   Jun 15 01:37:27 jnl: disk3s1: journal replay done.
   Jun 15 10:33:57 process qmastercc[163] caught causing excessive wakeups. Observed wakeups rate (per sec): 1016; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 59722
   Jun 15 22:20:37 process smcFanControl[246] caught causing excessive wakeups. Observed wakeups rate (per sec): 324; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 46105
kexts
   com.squirrels.airparrot.framebuffer (3)
Daemons
   org.macosforge.xquartz.privileged_startx
   com.oracle.java.Helper-Tool
   com.microsoft.office.licensing.helper
   com.google.keystone.daemon
   com.adobe.fpsaud
Agents
   org.macosforge.xquartz.startx
   com.oracle.java.Java-Updater
   com.hp.help.tocgenerator
   com.google.keystone.system.agent
   com.divx.update.agent
   com.divx.dms.agent
   org.w0lf.cDock
   com.adobe.ARM.UUID
launchd
   /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
             (com.apple.AirPortBaseStationAgent)
   /Library/LaunchAgents/com.divx.dms.agent.plist
             (com.divx.dms.agent)
   /Library/LaunchAgents/com.divx.update.agent.plist
             (com.divx.update.agent)
   /Library/LaunchAgents/com.google.keystone.agent.plist
             (com.google.keystone.system.agent)
   /Library/LaunchAgents/com.hp.help.tocgenerator.plist
             (com.hp.help.tocgenerator)
   /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
             (com.oracle.java.Java-Updater)
   /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
             (org.macosforge.xquartz.startx)
   /Library/LaunchDaemons/com.adobe.fpsaud.plist
             (com.adobe.fpsaud)
   /Library/LaunchDaemons/com.apple.aelwriter.plist
             (com.apple.aelwriter)
   /Library/LaunchDaemons/com.google.keystone.daemon.plist
             (com.google.keystone.daemon)
   /Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
             (com.microsoft.office.licensing.helper)
   /Library/LaunchDaemons/com.oracle.java.Helper-Tool.plist
             (com.oracle.java.Helper-Tool)
   /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist
             (org.macosforge.xquartz.privileged_startx)
   Library/LaunchAgents/com.adobe.ARM.UUID.plist
             (com.adobe.ARM.UUID)
   Library/LaunchAgents/com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID. plist
             (com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID)
   Library/LaunchAgents/org.w0lf.cDock.plist
             (org.w0lf.cDock)
Bundles
   /System/Library/Extensions/APExtFramebuffer.kext
             (com.squirrels.airparrot.framebuffer)
   /System/Library/Extensions/hpPlugInInit.kext
             (com.hp.scanner.PlugInInit)
   /System/Library/Extensions/hpPlugInInit.kext/Contents/Resources
             (com.hp.scanner.PlugInInit)
   /System/Library/Extensions/ssuddrv.kext
             (com.devguru.driver.SamsungComposite)
   /Library/Audio/Plug-Ins/Components/Ambience.component
             (com.smartelectronix.magnus.Ambience)
   /Library/Audio/Plug-Ins/Components/ARIA Player AU.component
             (N/A)
   /Library/Audio/Plug-Ins/Components/SmartMusicSoftSynth.component
             (com.makemusic.audiounit.smartmusicsoftsynth)
   /Library/Audio/Plug-Ins/VST/ARIA Player VST Multi.vst
             (N/A)
   /Library/Audio/Plug-Ins/VST/ARIA Player VST.vst
             (N/A)
   /Library/Internet Plug-Ins/DivX Web Player.plugin
             (com.divx.DivXWebPlayer)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (N/A)
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
             (com.google.googletalkbrowserplugin)
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
             (com.oracle.java.JavaAppletPlugin)
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
             (com.google.o1dbrowserplugin)
   /Library/Internet Plug-Ins/OVSHelper.plugin
             (com.divx.OVSHelper)
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
             (com.microsoft.sharepoint.browserplugin)
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
             (com.microsoft.sharepoint.webkitplugin)
   /Library/Internet Plug-Ins/Silverlight.plugin
             (com.microsoft.SilverlightPlugin)
   /Library/Internet Plug-Ins/SurveillanceClient.plugin
             (com.boxdeng.xvmsplugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   /Library/PreferencePanes/HP Scanjet.prefPane
             (com.hp.scanjet.prefs)
   /Library/PreferencePanes/JavaControlPanel.prefPane
             (com.oracle.java.JavaControlPanel)
   /Library/QuickTime/CanonMJPEGAVI.component
             (jp.co.canon.MJPEGAVIExporter)
   /Library/QuickTime/CanonMJPEGAVIDec.component
             (jp.co.canon.CanonMJPEGAVIDec)
   /Library/QuickTime/CanonText.component
             (jp.co.canon.Text)
   /Library/Spotlight/Finale.mdimporter
             (com.makemusic.MDImporter.Finale)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
   Library/Caches/com.apple.Safari/Extensions/AdBlock.safariextension
             (com.betafish.adblockforsafari)
   Library/Caches/com.apple.Safari/Extensions/ExifExt.safariextension
             (de.phriedrich.exifext)
   Library/Caches/com.apple.Safari/Extensions/My eBay Manager-2.safariextension
             (com.ebay.safari.myebaymanager)
   Library/Caches/com.apple.Safari/Extensions/Social Fixer.safariextension
             (com.socialfixer)
   Library/Caches/com.apple.Safari/Extensions/Turn Off the Lights.safariextension
             (com.stefanvd.turnoffthelights)
   Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
             (com.Google.GoogleEarthPlugin.plugin)
   Library/Internet Plug-Ins/WebEx64.plugin
             (com.cisco_webex.plugin.gpc64)
   Library/ScriptingAdditions/EasySIMBL.osax
             (com.github.norio-nomura.EasySIMBL.osax)
dylibs
   /usr/lib/libdvdcss.2.dylib
Contents of /etc/ssh_config
    Host *
      SendEnv LANG LC_*
   Host *
       XAuthLocation /opt/X11/bin/xauth
Font issues: 41
Listeners
   launchd: afpovertcp
   launchd: microsoft-ds
   launchd: ssh
   kdc: kerberos
   nfsd: 1023
   rpc.statd: exp1
   rpc.lockd: 1017
   rpcbind: sunrpc
   rpc.rquot: garcon
Wi-Fi
   link auth: wpa-psk
User login items
   iTunesHelper.app
   smcFanControl
   Auto Mute.app
   SurplusMeterAgent.app
   RightZoom.app
   SpeechSynthesisServer.app
Hidden apps
   .magicJack/Softphone/magicJack.app
   .magicJack/Softphone/splash.app
Restricted files: 2584
Safari extensions
   ExifExt
   Turn Off the Lights
   My eBay Manager
   AdBlock
   Social Fixer
Elapsed time (s): 387

"Invalid Binary" error on app. Apple's reason is "Missing 64-bit support" due to changes from Feb 1st 2015

Hello
Can anyone help me with an "Invalid Binary" error on my app.
Apple's response is:
Dear developer,
We have discovered one or more issues with your recent submission for "DPS Notes". To process your submission, the following issues must be corrected:
Missing 64-bit support - Beginning on February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and be built with the iOS 8 SDK. Beginning June 1, 2015 app updates will also need to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build setting of “Standard architectures” to build a single binary with both 32-bit and 64-bit code.
Once these issues have been corrected, use Xcode or Application Loader to upload a new binary to iTunes Connect. Choose the new binary on the app’s Details page in My Apps on iTunes Connect, and click Submit for Review.
Regards,
The App Store team
Can someone from the Adobe DPS team let me know how I can recreate the .ipa file so that it will meet Apple's requirements.
They seem to have moved the goalposts since I created the original .ipa file in December. I thought I'd submitted it, just went back through iTunes Connect to check info as I hadn't heard anything from them, then hit this brick wall. Any help offered would be much appreciated.
Thanks
Rebecca

Hi
I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
I have put a support email into Apple, but don't expect a reply any day soon.
The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
Do you mean, going back to the Folio Producer Panel, and building a whole new App?
This process certainly isn't for the faint-hearted!
HELP!

XML Publisher Report ends with Warning -- Invalid Character Error in XML

Hi,
I have migrated the standard report 'Invoice Print Selected Invoices' from Reports 6i to XML Publisher. It has to print a Euro(€) in the report. It does not even generate the XML File fully. It gives the below error in the XML File. When i remove the special character, it works fine.
Please let me know the settings to ensure that XML file also accepts the special characters. How do i get the Euro symbol printed in XML File with out giving Invalid Character Error?
===========================================================The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again
later.
An invalid character was found in text content. Error processing resource 'http://dfw1svdevapp03.ora.rackspace.com:8040/OA_...
<C_INV_CURRENCY_SYMBOL>
N class="m">>
<LINE_UOM />
<LINE_UNIT_SELLING_PRICE />
===========================================================
The XML File even does not show which character set it uses. The output file starts with:
===========================================================
<?xml version="1.0" ?>
- 
===========================================================

Hi Tim,
Thanks for your adhoc response.
I have gone thru the Document 222663.1 and it says that the Developer 6.0.8.23 is required to handle this problem. We are using almost the updated Developer version i.e., Developer 6.0.8.25. So, this should be handled automatically, but it still errors out. Please suggest.
Thanks,
Kesava

Invalid number error for bind dialog

Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
Running under WinXP
Issue description:
We get an invalid number error when bind variable filled with an enter in the bind dialog

It is hard to say what is causing your problem without the specifics (ie query and value entered for the bind variable). Try running the same statement with the value of the bind variable in place of the bind variable (ie instead of running "select * from dual where dummy = :var" with a value of 'x' for :var, run "select * from dual where dummy = 'x'"). If you get the same error, then it is not an issue with the use of bind variables.
Be aware that currently you cannot define the data type of bind variables (unlike TOAD, etc) and they are all treated as character values. I wouldn't have thought that this would cause you problem unless you are using a bind variable to restrict a numeric column to a specific value and you are entering a non-numeric bind (ie "select * from people where person_id = :id" and using 'xyz' as the value for :id).

Please help me itunes 8 wont load w/ invalid signature error

There has to be some sort of cosmic joker who is laughing at all of us. Perhaps the folks at Verisign are playing games with us or maybe it's Microsoft. How can there be a requirement to upgrade to itunes 8 when you purchase a new Nano and then not be able to do it because of an invalid signature error. I'm not the only one who has had this problem as I see it all over the web. I have tried it on another system sitting right next to this one (Win vista x32bit) and it didn't work either. I have deleted everything and updated win installer ver 4.5 and nothing works. The application wont run because of the signature error. I'm sure that the powers that be know what the problem is but dont want to release the fix because one side or the other hasn't been paid the appropriate money. It's always about the money. I have read every thread and suggestion that I could find but cant get it to work. If anyone has the answer please help me. I'm not a technotard and this is frustrating

I am afraid AFIK a clear cut solution for this hasn't emerged.
Are you trying to update with Apple Software Update. You might try repairing it from add/remove programs and trying again after a restart.
Have you tried downloading the iTunes installer from here:
http://www.apple.com/itunes/download/
Save the file on your desktop and run it from there.
I would clear your temporary Internet files and restart your PC before doing this.
If that doesn't work, maybe running the installer from your browser would work, although saving the file is usually best.
I have one report that a problem with a router causes this problem and that replacing the router fixed it, but in this case all downloads were affected.
It would be interesting to see if you can install the standalone Quicktime as a test. You can download it from here:
http://www.apple.com/quicktime/download/win.html
You want the version without iTunes, which is not the default.

"invalid argument" error message when connecting to the App store after upgrading iphone 4 to 5.0 firmware

Hi everyone,
I have seen many topics about this problem but none of them helped and they seem to date a little bit so I would like to ask again.
here is the situation :
we have two iphone 4 in the house and everything was going fine until we did the update to the new 5.0 firmware. there was no problem while the update had only been applied to the first iphone... but after updating the second one, we now have the same problem on both iphones. We can still connect to the internet from the iphone just fine but the connection is erratic at best with the itunes store because we keep getting cut by this dreaded error message "connection to the itunes store impossible, "invalid argument" occasionnally we'd get a different message that says "connection reset by peer"
- what is invalid argument mean anyway???
- I have tried to renew the lease in the network settings, it didn't work
- I have tried to reset the network setting, it didn't help
- I have checked in the network setting for the IP address, it starts with 192.xx.xx..... which is supposed to be a good thing as opposed to 162.xx.xx....
- I have reset my router, nothing happened...
- I have tried unauthorising my computer to any accounts because we were afraid that using two iphones with two different itunes store accounts one the same computer may have caused these problems.. but no luck
I am running out of ideas, I would like to renew my frustration to apple because we buy these expensive products and still seem to suffers from stupid bugs... I was under the impression that these things were tested !!! anyway if anyone has found a definitive solution to this problem (short of burning your iphone out of anger) it would be deeply appreciated.
thx

Hi!
I'm also using Air SDK 15 and I'm getting Invalid Bundle Error:
Adobe Air iOS Invalid Bundle
The bundle does not support the minimum version os specified in info.plisthttp://stackoverflow.com/questions/26047837/adobe-air-ios-invalid-bundle-the-bundle-does-n ot-support-the-minimum-version-os
Really need help
Michael

PeopleTools 8.53 , 9.2 Install - Missing or invalid version of SQL library

Hello All
I am installing 9.2 / 8.53 on a Windows 7 Professional (64 Bit) Machine
I have installed Oracle 11g 32 bit (Server and Client) edition that has the following paths:
C:\oracle\product\11.2.0\dbhome_1 and
C:\oracle\product\11.2.0\client_1
I can connect to DB with SYSADM , PS accounts with no issues and also to App Designer and Data Mover ;
I am trying to configure App Server. The Tuxedo is 64 bit. Installed this with no issue.
On the PSAdmin configuration for App Server, I have provided the path of C:\oracle\product\11.2.0\client_1\bin.
When trying to boot, it gives me the below errors in log file:
PS General SQL Routines: Missing or invalid version of SQL library PSORA64 (200,0)
and stderr file has:
LoadLibraryA() in pscompat.dll failed for 'PSORA64.dll': reason=126
How to fix this?

Your DB should already have been installed on 64 bit Oracle Server.
The Application server, as stated in the installation manual in Task 8A-4: Creating, Configuring, and Starting an Initial Application Server Domain:
Enter 20 for AddToPATH, and enter the path to the 64-bit connectivity software
If DB and Appserver are on the same server you can reuse the DB libs, otherwise you need to install a 64 bit Oracle Client for the application server
Note:
Application Designer, Datamover, etc still need 32 bits Oracle Client for connectivity.

PS General SQL Routines: Missing or invalid version of SQL library libpsora

Hi Everyone,
Need your assistance. Perhaps someone of you encountered this already. I have completed setting up everything until the application server part. If I try to boot the application server I get the error below. I have tried several solution published in Oracle Support and these did not resolve the issue.
Appserv log
PSADMIN.15894 (0) [10/01/10 16:17:21](0) Begin boot attempt on domain hc91dmo
PSAPPSRV.15941 (0) [10/01/10 16:17:50](0) PeopleTools Release 8.50 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.15941 (0) [10/01/10 16:17:51](0) Cache Directory being used: /applications/psoft/hc91/appserv/hc91dmo/CACHE/PSAPPSRV_1/
PSAPPSRV.15941 (0) [10/01/10 16:17:51](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora (200,0)
PSAPPSRV.15941 (0) [10/01/10 16:17:51](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HC91DMO with user PS.
PSAPPSRV.15941 (0) [10/01/10 16:17:51](0) Server failed to start
PSADMIN.15894 (0) [10/01/10 16:17:58](0) End boot attempt on domain hc91dmo
Tuxedo log
161730.TESTLAB-03!BBL.15902.2248875168.0: 10-01-2010: client high water (0), total client (0)5900.2137364080.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
161728.TESTLAB-03!tmboot.15901.2219435552.-2: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161728.TESTLAB-03!tmboot.15901.2219435552.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
161728.TESTLAB-03!tmboot.15901.2219435552.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
161730.TESTLAB-03!BBL.15902.2248875168.0: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit, Patch Level (none)
161730.TESTLAB-03!BBL.15902.2248875168.0: LIBTUX_CAT:262: INFO: Standard main starting
161733.TESTLAB-03!tmboot.15905.1855951168.-2: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161733.TESTLAB-03!tmboot.15905.1855951168.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
161733.TESTLAB-03!tmboot.15905.1855951168.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
161735.TESTLAB-03!PSWATCHSRV.15906.1160363616.-2: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161735.TESTLAB-03!PSWATCHSRV.15906.1160363616.-2: LIBTUX_CAT:262: INFO: Standard main starting
161750.TESTLAB-03!PSAPPSRV.15941.4117513168.0: 10-01-2010: Tuxedo Version 10.3.0.0, 64-bit
161750.TESTLAB-03!PSAPPSRV.15941.4117513168.0: LIBTUX_CAT:262: INFO: Standard main starting
161751.TESTLAB-03!PSAPPSRV.15941.4117513168.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
161751.TESTLAB-03!tmboot.15905.1855951168.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
161755.TESTLAB-03!BBL.15902.2248875168.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
161758.TESTLAB-03!PSADMIN.15894: End boot attempt on domain hc91dmo
stderr.log
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
Here is my environment configuration.
CentOS 5.4 64 bit
PeopleTools 8.50
HCM 9.1 MultiLanguage
WebLogic 11g R1
Tuxedo 11g R3
VmWare Server 2
Oracle 11g
Thanks ....

It's Oracle 11.2.0.1.0. Yes, I can login to database via SQL PLus.
[oracle@TESTLAB-03 ~]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 1 17:56:13 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> conn people/peop1e
Connected.
Here what in my .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_HOME=/applications/oracle/product/11.2.0
export TUXDIR=/applications/mdlware/tuxedo10gR3
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$TUXDIR/lib
export PATH=$PATH:$ORACLE_HOME/bin:$TUXDIR/bin:$ORACLE_HOME/lib
export PS_HOME=/applications/psoft/hc91
export PS_CFG_HOME=$PS_HOME
. $PS_HOME/psconfig.sh
cd $PS_HOME

PS General SQL Routines: Missing or invalid version of SQL library libpsor

Hi,
I am facing the above error while booting up the Appserver. Could someone help me on these please.
below are the softwares used:
Oracle Linux5.4 64bit
peopletools:8.51
Application HCM:9.1
weblogic wls_1034
Tuxedo 10g3
Stderr shows:
dlopen in libpscompat failed for 'libpsora.so': libclntsh.so.10.1: cannot open shared object file: No such file or directory
Appserv_log
GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora (200,0)
PSAPPSRV.9875 (0) [12/11/12 15:37:28](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HCMDMO with user PS.
Thanks in advance

It's Oracle 11.2.0.1.0. Yes, I can login to database via SQL PLus.
[oracle@TESTLAB-03 ~]$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 1 17:56:13 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> conn people/peop1e
Connected.
Here what in my .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_HOME=/applications/oracle/product/11.2.0
export TUXDIR=/applications/mdlware/tuxedo10gR3
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$TUXDIR/lib
export PATH=$PATH:$ORACLE_HOME/bin:$TUXDIR/bin:$ORACLE_HOME/lib
export PS_HOME=/applications/psoft/hc91
export PS_CFG_HOME=$PS_HOME
. $PS_HOME/psconfig.sh
cd $PS_HOME

Missing or invalid version of SQL library PSORA

getting this error when starting app designer after new installation. "Missing or invalid version of SQL library PSORA"

Add a oracle_home to your environment variable with the path of your oracle home. That should take care that error.
Let me know if you have any questions.
Regards,
RK

Invalid Version Error

Similar Messages

Maybe you are looking for