InvalidCastException occurred. Return argument has an invalid type in illustrator cs5 VB in VS2012.

I am writthing a simple illustrator CS5 VB application for testing in VS2012 on Windows7 64-bit. The application can be built succesfully, but got an error at line 2- InvalidCastException occurred. Return argument has an invalid type.
line 1 - Dim appref As Illustrator.Application = New Illustrator.Application
line 2 - Dim myDoc As Illustrator.Document = appref.ActiveDocument
The detailed errror is
System.InvalidCastException occurred
HResult=-2147467262
Message=Return argument has an invalid type.
Source=mscorlib
StackTrace:
at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)...................
But similar code works in word 2007 macro, so reference to illustrator CS5 is fine. I think it is caused by .NET Framework 4. Where should I start to solve the problem? Any help is appreciated. Thanks!

Hello,
I am getting the same error and I found some articles on Oracle Metalink (Note 360287.1) regarding the filesystemio_options parameter and the mount option cio. Basically it looks as if AIX will not allow another program e.g. cp to access the oracle datafile whilst oracle is accessing it unless you have set the cio option at the filesystem level.
I haven't tried this yet as I need to get some downtime but I think this is what is causing the problem.
Be careful if you don't have the Oracle datafiles in seperate filesystems because there is a problem with cio and running binaries. (check the man pages for the cio mount option)
Hope this helps you.
Regards
Garry Bayford.

Similar Messages

Unable to load the vertipaq engine because there was a COM exception . Return argument has an invalid type.

Hi All,
I have been using powerpivot for months (2010 PowerPivot on Excel 2010, with Sql 2008). I tried to open powerpivot today and get the following below. I have already tried uninstalling powerpivot and reinstalling it to no avail.
Any suggestions would be appreciated. Thanks, Ivan
Unable to load the vertipaq engine because there was a COM exception while loading....
============================
Error Message:
============================
Return argument has an invalid type.
============================
Call Stack:
============================
   at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
   at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Office.Interop.Excel.WorkbookConnection.get_OLEDBConnection()
   at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================

Hi All,
For anyone who this happens to, what ended up fixing it was uninstalling and reinstalling excel. I was using excel 2010, so I did this
Go to add/remove programs
Highlight Microsoft Office Professional 2010
Click Change
ensure Add remove features is selected and click continue
click on the little arrow beside excel and click on Not Available, click continue
After it is done, excel will be uninstalled.
When this is done, you can do the same process again, but this time chose the other appropriate selection
instead of not available. I chose Run All from My Computer.

Grey Boxes when rolling over type in Illustrator CS5.5

This is driving me insane. I have to have a solution as this is a work computer and I'm a designer who has deadlines to meet.
Whenever I roll over, select, move or try to edit some type elements in Illustrator, the preview of the type flicks into grey boxes (see below).
There's no cursor and I can't see what I'm typing nor can I be precise with the text placement.
What is the problem and how do I fix it?

By dock do you mean the Swatches panel? Have you tried the Delete Unused Panel Items action from the Action panel. They can also be in Symbols or Brushes but if you run the action it will delete them in order so that the color swatches are deleted last and if they were in a Symbol, Graphic Stlye or Brush with the original gone they should delete. Also make sure that everything is visible and unlocked.

DeserializeReply get Invalid type error

We have an old webservice returns an xml document. The schema is defined as type "Any", the method return type is object. I can see the message returned correctly in the soap envelop (since the return content is xml) but I'll get a null result.
If I apply a formatter and return the xml contents directly, I'll get a "Return argument has an invalid type" invalid cast exception. I tried to return string and got the same error. How to just get the original message through?

Did you declare the type as 'object'. You should be able to cast an object to any other type if the cast is valid. Is it possible that some values in the xml are null? Then you must test for null and cast only the objects that are not null.
jdweng

When I try to download and install the latest software version of iTunes, this message occurs: "iTunes has an invalid signature. The download has been removed." Any suggestions?

When I try to download and install the latest software version of iTunes, this message occurs: "iTunes has an invalid signature. The download has been removed." Any suggestions?

You seem to have an iTunes problem and not an iPod problem. I suggest posting in the iTunes forum.
How areyou doing the download?
From Apple's site?
Via the Apple downloader
PC or Mac?

Javax.jms.InvalidDestinationException: Destination has invalid type "class

Dear Sirs,
I am trying to send a JMS message from an application deployed to AS 10.1.3.3 to a destination (Queue), that was described with help of Oracle Enterprise Manager. This desination is working correctly if I send message from ESB by it's adapter. But my class refuses to execute method "createProducer": I have an exception:
"javax.jms.InvalidDestinationException: Destination has invalid type "class oracle.jms.AQjmsDestination" and cannot be used with OC4J JMS".
What is the case?
Thanks.

Thank You, Gera!
My mistake was: I tryed to use oficially registed QueueConnectionFactory. But, indeed, AS notes that "connection factories are only needed for in-memory and file based persistence destinations. Destinations that use database persistence do not require connection factories to be specified - these are created dynamically by the JMS connector (adapter) used for database persistence."
So, I found ra.xml file in directory of generated adapter, fetched queue factory name that seems correct for me, and use it.
Now it works!
Спасибо, Гера.

Certificate with PSE type SystemPSE has been invalid

Hi,
I got the following error in the log. Please advise.
Certificate with PSE type >SystemPSE< has been invalid for 733561 days
Regards,
Tony

Tony,
If you are not currently using SSO, you may want to clean up the System PSE at any time, to eliminate those log errors.
If you are actively using SSO, youu2019ll want to wait for off-peak hours or a maintenance window.
The following is based on having the system certificate and the portal SSO certificate. If you have more for other reasons, youu2019ll need to take more care and planning.
To do this, you will need to:
-     go to strustsso2
-     right click on System PSE (left panel)
-     select Delete
-     green arrow back all the way out of strustsso2 to the main screen
- Go back into strustsso2
- right click on create
- accept the default entries for u2018create PSEu2019
- click Save
- If you expand the System PSE on left, you should see your server name.
- Double click the server to show the system certificate.
- Then double click the certificate to see the details.
-     Finally, youu2019ll want to import your SSO certificate, add it to the Certificate List and add it to the ACL, and save.
Of course, all of this is if you want to have a cleaner system log. If you have any doubts before attempting, feel free to post as there are a lot of helpful people in the forums, and in this thread alone!
If everything is working as expected and you donu2019t mind ignoring the system log messages, then you can take no action.
Hope this helps!
PJ

Invalid Type Expression Compile Error

Hi,
Can anybody help?
C:\java>javac PointRectangle.java
PointRectangle.java:74: Invalid type expression.
loc=new Point(xCoord,yCoord)//*****
^
1 error
Create class Point which replaces xCoord & yCoord and
is used in class Shapes
TEST: Has been tested independently
import javax.swing.JApplet;
import java.awt.Graphics;
class Point
     private int xCoord;
     private int yCoord;
     Point( ){}
     Point(int xCoord, int yCoord)
set(xCoord,yCoord);
     public void set(int x, int y)
xCoord = x;
     yCoord = y;
     public int getX()
return xCoord;
     public int getY()
return yCoord;
Create new version of Rectangle by eliminating anything common to all Shapes
TEST: class Rectangle has a point;
class Rectangle
private static int counter = 0;
//xCoord = x;
//yCoord = y;
private Point loc;//*****
private int width;
private int height;
Rectangle( )
++counter;
Rectangle(int x, int y, int w, int h)
//xCoord = x;
//yCoord = y;
loc = new Point(x,y)//*****
width = w;
height = h;
     ++counter;
//Use any set() if you don't want to initialize dMembrs
//through c_tors
//set rectangle at a given x & y coord
public void setLocation(int x, int y)
     //xCoord = x;
     //yCoord = y;
loc.set(x,y);//*****
public void setDimension(int w, int h)
     width = w;
height = h;
public void set(int x, int y, int w, int h)
//xCoord = x;
//yCoord = y;
loc.set(x,y);//*****
width = w;
height = h;
//Use get() if you don't want to access dMembrs directly
//public int getX() {return xCoord;}
public int getX() {return loc.getX();}//*****
//public int getY() {return yCoord;}
public int getY() {return loc.getY();}//*****
public int getWidth() {return width;}
public int getHeight() {return height;}
//Rectangle's perimeter
public int perimeter()
return (2 * width) + (2 * height);
//Rectangle's area
public int area()
return width * height;
//output
     public void draw(Graphics g)
//g.drawRect(xCoord,yCoord,width,height);
g.drawRect(loc.getX(),loc.getY(),width,height);//*****
//Convert String
     public String toString()
     //return
// "(("+ xCoord +", "+ yCoord +"), "+ width +","+ height +")";
     return
"(("+ loc.getX() +", "+ loc.getY() +"), "+ width +","+ height +")";//*****
//returns number of rectangels created
     public static int recCount()
return counter;
}//End Class Rectangle
public class PointRectangle extends JApplet
Rectangle r1;
Rectangle r2;
Rectangle r3;
public void init()
//create Rectangles
r1 = new Rectangle( );
r1.set(20,200,50,40);
r2 = new Rectangle(20,300,80,60);//x,y,width,height
r3 = new Rectangle();
} //end init()
public void paint(Graphics g)
g.drawString("r1 Area: " + r1.area(),20,50);
g.drawString("r1 Perimeter: " + r1.perimeter(),20,75);
g.drawString
("r1 arguments in r1.set(): " + r1.toString(),20,100);
g.drawString
("r2: xCoord =" + r2.getX() + " yCoord=" +r2.getY()
+ " Width =" + r2.getWidth()
+ " Height=" + r2.getHeight(), 20,125);
r3.setLocation(20,400);
r3.setDimension(100,150);
g.drawString
("r3: xCoord =" + r3.getX() + " yCoord=" + r3.getY()
+ " Width =" + r3.getWidth()
+ " Height=" + r3.getHeight(), 20,150);
g.drawString
("r's created: "+Rectangle.recCount(),20,175);
r1.draw(g);
r2.draw(g);
r3.draw(g);
} //end paint()

Are you referring to the following:I'm not; the message you posted is... :)
There's only one place where you handle an object reference in that code: "loc.set(x,y);". So it must be that the reference "loc" is null; you haven't determined which object it should point to so it doesn't point to any object.
Looking deeper at the code above, it's not a big surprise as you never actually assign loc to anything. The only place where you do "loc = ..." is a constructor which you don't seem to use.

CrystalReports 'System.InvalidCastException' occurred

Hi Team, I'm getting the below error. Can some one please assist me on this? I'm using Windows 2012 R2 server and CrystalReport Runtime 13.0.x version installed on the server. Application built on Any CPU using VisualStudio 2010 Error Message: HandlingInstanceID: c68a0e37-5eb5-4cb5-9587-6d6030b79b48 An exception of type 'System.InvalidCastException' occurred and was caught. --------------------------------------------------------------------------- 01/13/2015 16:26:11 Type : System.InvalidCastException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Message : Unable to cast object of type 'FileStreamDeleteOnClose' to type 'System.IO.MemoryStream'.

Hi Don,
I gave this a try and I got the same results I was getting before the change the ExportToStream is returning a object of type FileStreamDeleteOnclose instead of an object of type IO.Stream.
You have what I had before already, but here is what I changed it to in order to do what the developer asked:
Protected Friend Function GetPDF(ByVal genColsolidatedPDF As String) As IO.
Stream
Dim exportStream As System.IO.Stream = GenerateReport(genColsolidatedPDF).ExportToStream(ExportFormatType
.PortableDocFormat)
Using fileStream As New IO.FileStream(expPath, System.IO.FileMode.Create, System.IO.FileAccess
.Write)exportStream.CopyTo(fileStream)fileStream.Dispose()
exportStream.Close()
Return
exportStream
End Function
Private Function GenerateReport(ByVal genConsolPDF As String) As
ReportDocument
Dim connInfo As New
ConnectionInfo
Dim databaseLoginInfo As New
TableLogOnInfos
Dim reportDoc As New
ReportDocument
Dim tableSet As
Tables
'reportDoc = New ActiveSignatures
reportDoc.Load(rptPath)
reportDoc.SetParameterValue(DAL.ParmName.MRId, BLL.SessionData
.EssInfo.MRID)reportDoc.SetParameterValue(cCONSOLIDATEPDF, genConsolPDF)
connInfo.ServerName = [Lib].ApplicationData.db_Server
connInfo.DatabaseName = [Lib].ApplicationData.db_Name
connInfo.UserID = [Lib].ApplicationData.db_UserId
connInfo.Password = [Lib].ApplicationData.db_Password
tableSet = reportDoc.Database.Tables
For Each singleTable As Table In
tableSet
Dim singleTableLogoninfo As TableLogOnInfo
= singleTable.LogOnInfo
singleTableLogoninfo.ConnectionInfo = connInfo
singleTable.ApplyLogOnInfo(singleTableLogoninfo)
Next
Return reportDoc
End Function
It seemed like the developer maybe wanted more information about how the report is then used, so this is what happens. The report is then supposed to be returned as type IO.Stream and then it is to be converted to an IO.MemoryStream:
Dim sourceFiles(sourceSize as MemoryStream)
sourceFiles(i) = New MemoryStream(GetByteArray(CType(parameters.SignaturePage, IO.MemoryStream)))
parameters.SignaturePage is the crytal report that is being returned, that is what needs to be IO.Stream, but is coming back as FileStreamDeleteOnclose.
When the application then tries to convert from FileStreamDeleteOnClose to IO.MemoryStream, that is where the error occurrs: Exception: System.InvalidCastException: Unable to cast object of type 'FileStreamDeleteOnClose' to type 'System.IO.MemoryStream'. But this is only occurring because I am getting back the incorrect object type from the ExportToStream call.
Before I upgraded to SP 13 this worked fine, and has been working fine for years. It is after SP13 that this ExportToStream stopped giving me the IO.Stream object type and is now returning the FileStreamDeleteOnClose.
I hope that helps!
Thank you,
Leah

Urgent! The field jnlp codebase has an invalid value: $$codebase

Hello All,
1. I am trying to run a java web start application, i am using tomcat 5.5.20 server. I am using the JnlpDownloadServlet to use the $$codebase and $$name to dynimically code the path to the jar's and the jnlp file.
Here is what i have done:
Here i have a JnlpDownloadServlet in a seperate folder called (D:/apache-tomcat-5.5.20/webapps/online/server1/WEB-INF/lib/jnlp-servlet.jar).
2. Now i am placing my .jnlp and my application jar's in a seperate folder called *"client1"* (D:/apache-tomcat-5.5.20/webapps/online/client1/)
I need to have the client1 and server1 folders and i have to map the servlet to the jnlp file, because i want to keep my jars's and the servlet in a seperate folders.
3. I have the web.xml file in WEB-INF folder.
4. web.xml:
<?xml version="1.0" encoding="UTF-8"?>
<web-app>
<servlet>
<servlet-name> JnlpDownloadServlet</servlet-name>
<servlet-class>jnlp.sample.servlet.JnlpDownloadServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
*<url-pattern>../client1/*.jnlp</url-pattern>* **
</servlet-mapping>
</web-app>
Myapp.jnlp:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0+"
codebase="$$codebase"
href="$$name">
<information>
</information>
<resources>
<j2se version="1.6+"/>
<jar href="$$codebase/XXXXXX.jar" main="true" download="eager"/>
     <jar href="$$codebase/XXXX.jar" download="eager"/>
     <jar href="$$codebase/XXXXX.jar" download="eager"/>
<nativelib href="$$codebase/XXX.jar" />
</resources>
</jnlp>
While i run the application. i get the following error:
Error occured when trying to run a Java web start application
BadFieldException[ The field <jnlp>codebase has an invalid value: $$codebase,$$codebase]
     at com.sun.javaws.jnl.XMLUtils.getAttributeURL(Unknown Source)
     at com.sun.javaws.jnl.XMLUtils.getAttributeURL(Unknown Source)
     at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

yes. I am sure.
The JnlpDownloadServlet takes the URL address we enter in the browser as codebase and the variable $$codebase is assigned the value which is taken dynamically.
From Developer's Guide:
Processing of JNLP files
The JnlpDownloadServlet will automatically macro-expand certain template values in a JNLP file and replace them with URLs that are specific to the current request. This will enable JNLP files to be written and deployed without containing hard-coded URLs.
Macro expansions
The servlet will automatically substitute certain fixed keys in the JNLP file (prefixed with $$) with URLs that are based on the current request. The keys are designed so location-independent WAR files can be created and deployed into a Web container.
The table below shows the 4 keys that the servlet will look for and substitute:
Pattern Value
$$codebase Complete URL for request, except name of JNLP file
     $$name Name of the JNLP file
$$context Base URL for the Web Archive
     $$site     Web site address without the WAR context portion
For example: Consider the example1 WAR file. Lets assume that it has been deployed at the following location: http://www.mytool.com/tool. Thus, a request to http://www.mytool.com/tool/app/launch.jnlp will return the JNLP file. The values of the macro-expanded keys would be:
$$codebase = http://www.mytool.com/tool/app/
$$name = launch.jnlp
$$context = http://www.mytool.com/tool/
$$site = http://www.mytool.com/
The servlet does not validate the format of the JNLP file nor that the XML is well-formed. The value substitution is purely textual.

When I try to download the latest version of iTunes on my iPod Classic I get the message that "iTunes has an invalid signature" and that "Content was blocked because it was not signed by a valid security certificate. Anyone know how to fix this?

When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature. The download has been removed." I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc." This problem has never occurred with earlier versions of ITunes. Anyone know how to fix this problem?

Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
Let us know what happens.

Error occurred while installing the application: Invalid device specified

Error occurred while installing the application: Invalid <device> specified i am getting this error on windows. How to solve that.

Hi there.
I know this is an old post, but I fell here having this same problem for some weeks now, and i just figured my issue. Hope it help others:
My iPhone is connecting automatically with my itunes on computer. Not really sure what type of connection or wireless sync, but the fact is that it IS connecting.
For some weird reason it gets Flash Builder crazy and it cannot find the right device anymore. Even when I get my iPhone connected by cable, it says that it found the device, but doesn`t publish to it. The Flash Builder says that it was published, but nothing gets installed, and the debugger cannot connect.
MY SOLUTION (for now): Turn off the phone wi-fi, so it gets out of my home network. works like a charm and I finally can test on my device again.
Really hope this helps.

Re: Invalid Type CURR while activating the data source from R/3 to BI 7

Dear Expert,
I have created a data source using function module and has it successfully replicated in BI 7.
But when I try to activate it, I run into the problem associated with "Invalid Type CURR" with two of the CURR fields.
Could you help me to resolve this problem or provide me with some suggestions?
Thanks and appreciated.
Arthur

In SAP BW 7.0 Currency types are managed via transaction RSCUR.. Perhaps you should check if everything is ok (i mean to check if the Currency Types are transported) before to active your DataSource.
It's only a suggestion .. good luck !

CNS-9025 An internal error occurred. ORA-00904: EXTRA_COL: invalid ID

With our new version of Mobile Server (10.2.0.2) a lot of problems seem to have been solved. In older versions we didn't succeed in republishing. Meaning we had to drop the old version en publish a new version. Doing this meant we had to redo data subsetting for every user, which is a lengthy task. Besides it triggers full refresh for every user, that is a major one as well.
In the new version a lot goes better, but still we are experiencing some problems (or challenges).
Again the main issue is that in the course of time our application grows.
Now we stumble into the simple issue:
We want to add a column to our database.
What we do is the following (as described by Oracle):
- Add the column (EXTRA_COL) to our 'mother'database
- Alter the snapshot definition for this column (add the column)
- Republish...
When I resynch the new column appears on my client, so far so good.
However if I change something to the data on the client and I do a resynch I get:
"CNS-9025 An internal error occurred. ORA-00904: EXTRA_COL: invalid ID.
It seems as though 'internally' the column is not added everywhere it should be.
For example the CEQ$table does not have the EXTRA_COL column.
I'm quite sure that somebody else should encounter these problems as well as new views lead to data structure changes quite often.
Anybody encountering this as well, and more important, somebody got a clue on what is going on?
Thnx in advance.

There is a bug with 10.2 where the re-publish of a item that has has ddl changes (like an extra column) does not always work correctly. It seems to be intermittent (at least in our environment) and the symptoms are
alter base schema table
re-publish snapshot (note if the snapshot definition is the standard 'select * from ...' you should not need to do anything apart from republishing)
no errors reported in the re-publish
however the new column has not been added to either CEQ$object OR CFM$WTGPI_nnnnn (the inqueue table for the object) - the missing column on the CFM$ table is the source of the error shown above in the posting as there is a mismatch when the data is uploaded
dropping the publication item would fix the problem, but be aware if you have any users out there, when they synchronise any data being uploaded for a publication item that has been dropped and re-created will be LOST with no error being reported (in the sync history you will see a blank name in the upload section), due to the internal mapping having changed
We have found that normally when this happens forcing a republish of the affected object by making a change to the selection logic (eg adding something like 'id is not null') and republishing again fixes the problem - as with a lot of mobile issues, fiddle with it enough and it will eventiually sort itself out

Firefox Displays "Peer's certificate has an invalid signature." SubCA shows "Could not trust this certificate for unknown reasons"

Using a 2-tier on-premise PKI. Offline Root CA (Standalone Windows 2008 R2 Enterprise) and online SubCA for issuing certificates (Domain-Joined Issuing CA)
ROOTCA certificate installed in the store and showing trusted (Uses a SHA2 signature and PKCS #1 SHA-256 With RSA Encryption algorithm)
ISSUINGCA certificate installed in the store and showing "Could not trust for unknown reasons" also has SHA2 signature with RSASSA-PSS algorithm
Issued certificate is for a Lync Front-End Web Server and when attempts are made to load the secure web connection. I receive the error "Peer's certificate has an invalid signature"
I've completely de-installed and re-installed Firefox. Removed and re-added the ROOT and SUBCA certs. Note: No issues when using same certs in Internet Explorer 8, 9 or 10 on the same system. Lync client also using same certificates, no issues. Only when accessing the Lync Web Services from Firefox.
Question: Does Firefox NSS Internal PCKS#11 Module support RSASSA-PSS SHA-256 with different hashes? How can I troubleshoot this further?

HI khetheri,
In order to better test the certificate may we request the certificate without the private keys? I have some backup from the security team if this is possible.
There is a temporary work around as well but I don't recommend turning on all certificates to make sure it is not a compatibility error(ish)
It is possible to check if it is being detected as a bad certificate in Firefox itself to eliminate compatibility issues.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Search for '''browser.xul.error_pages.expert_bad_cert ''' and set it to true to try the certificate normally.
Looking forward to your reply!

InvalidCastException occurred. Return argument has an invalid type in illustrator cs5 VB in VS2012.

Similar Messages

Maybe you are looking for