Invisible messages at sxmb_moni

All,
I have created SOAP to RFC service, and I am facing a strange phenomena. After sending a soap request (via XMLSpy ; and obviously getting a correct answer) I can monitor the message throw RWB (message monitoring) but cannot see any message at the sxmb_moni. In case Iu2019m trying to send damaged message (e.g., invalid xml message) via the XMLSpy, relevant error appears at sxmb_moni (i.e., functioning as expected). As first I assumed it was a u201Cjava issueu201D therefore J2EE was restarted with no outcomes.
What can be the reason? And what can be done?
10x
Uri

hi,
>>>What can be the reason? And what can be done?
set logging_sync parameter to 1
in SXMB_ADM transaction and you will see them
by default all errors are logged but not successfull sync messages
Regards,
Michal Krawczyk

Similar Messages

I can not find the messages in sxmb_moni in http to rfc scenarion

hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario
can anyone help me

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Can not see messages in SXMB_MONI of ECC

Hi Friends,
             Here I am facing some problem with SXMB_MONI of ECC. I am doing an XI upgrade from XI3.0 to PI 7.1.
when I am doing my interface upgrade I am unable to see messages in SXMB_MONI of ECC. As ECC is also got upgraded now BASIS is very confused about configuration.
             when I went through some blogs I came across some suggestions like configuration in SXMB_ADM. In ECC the integration engine configuration what I did is
               Role of Business System         : Application System.
               Corresponding Integ. Server    : dest://<HTTP DEST>
              One of my doubts:: Is <HTTP DEST> is the one which we are giving in XI/PI or the new one created for ECC. First BASIS set up <HTTP DEST> as the same one which was configured in PI. Then I went back to BASIS and tell them that ECC is having its own local Integration Engine, so we need to create <HTTP DEST> which connects to integration engine of ECC.
               Then they created one <HTTP DEST> for ECC. but when I am doing connection test, Http response is coming as 400 BAD HTTP Response :: protocol error. I have no idea why it is behaving like that.
               After when I go through some more blogs they are dealing with RFC destinations LCRSAPRFC and SAPSLDAPI. when I check it in ECC I didn't found RFC destination LCRSAPRFC but SAPSLDAPI is existing in ECC.
               more over some blogs deal with the configuration in Transaction SLDAPICUST. when I check it in ECC no configuration was done in SLDAPICUST.
               I already configured ENGINE_TYPE, IS_URL, LOGGING, LOGGING_PROPAGATION, LOGGING_SYNC under specific configuration data of SXMB_ADM of ECC.
               Please let me know what needs to be done and let me out of this confusion. As I am a PI developer I am unaware of all these configurations. expecting replies from gurus....
Regards,
DASARI

Hi Friends,
             Looking at some more blogs I got a doubt.
            Actually my scenario is File - XI - RFC.
            Now my doubt is whether we can see the messages which were going to ECC by RFC adapter ?
            Looking at a thread I got confused whether SXMB_MONI can capture messages only if they are coming from Proxy or IDOC . please clarify me.
Regards,
Dasari.

Message in sxmb_moni is getting cancelled in 3 mins

Hi Experts,
Few messages for synchronous interfaces are going in to error status in sxmb_moni after 3 minutes even when a timeout parameter of 5mins is maintained in the module tabe of receiver SOAP adapter. Sender is ECC system. Please help resolve the issue.
Thanks and Regards,
Krish

Hello Krish,
Can you check if you can implement the note #1899735 - XI runtime: Trace of HTTP timeouts. This then writes which configuration parameter determines the timeout within the trace of the message in SXMB_MONI.
Regards
Eoin Kierans

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

File to IDOC scenario-no messages in SXMB_MONI

Hi all,
   I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
I am doing a File to IDOC scenario through XI mapping.
I am not getting any messages in SXMB_MONI.
When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
Please help.
My scenario goes like this:
Sender : Business service(Some file location)
Used File adapter for sender communication channnel.
Receiver : Business system(SAP R/3)
Used IDOC Adapter for receiver communication channel.
One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?

Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
An inbound partner profile could not be found with the following key:
/LSDEMO/LS//DEBMAS////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
I already manitained following data and there is one record in EDP21.
SNDPRN = LSDEMO
SNDPRT = LS
SNDPFC = LS
MESTYP   = DEBMAS
MESCOD = space
MESFCT = space
TEST = space
EVCODE   = DEBM
SYNCHK = X
METHOD = space
USRTYP = space
USRLNG = space
INMOD = space
DCART = space
And please let me know whether I have to maintain outbound parameters also for my partner in XI system.I didn't see any difference even I maintained it.
And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
Edited by: Jaya on Feb 26, 2010 10:17 AM
Edited by: Jaya on Feb 26, 2010 10:27 AM

Cancel processing of message in SXMB_MONI

Hi All,
Can anyone please let me know how to cancel the message when- Scheduled for Outbound Processing Message in SXMB_MONI.

Hi All,
I tried in smq2. The status i LUWs show as follows.
Number of Entries Displayed: 0
Number of Queues Displayed: 0
But in SXMB_MONI there 5000 'Scheduled Outbound Processing Messages'
when i am trying to Cancel the message following message popup
' You cannot cancel XML Message' - when status is in 'Scheduled Outbound Processing Messages'
Can any one please help me

Can not Cancel Processing of Message in SXMB_MONI

Hi all
I'd like to clean up some outstanding error messages in SXMB_MONI but when I try to 'Cancel processing with errors' I get a message stating 'Can not cancel XML message with this status/type' The status is 'System Error - Restart not possible' Message no. XMS_ADM108
Can someone tell me how to get around this?
Thanks, Dennis
A total newbie

Hi Dennis,
you can archive your messages.
Have a look at this links to understand how to do it:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/1dc877301a06f4e10000000a422035/frameset.htm">Deleting Process Data No Longer RequiredDeleting Process Data No Longer Required</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm">Archiving and Deleting</a>
Too many questions on Archive/Delete messages.
Kind Regards,
Sergio

No Messages en SXMB_MONI in R/3 WebAS 6.20 with Add on

Hello everybody,
My problem is as follows, I have a scenario with R/3 ABAP Proxy-> XI R/3 ABAP Proxy, the problem is that I can't see any XML messages in SXMB_MONI in the R/3 Receiver, not synchrnous, not asynchronous, not erroneous, not succesfull messages I can't see any type or kind of messages, the R/3 is a WebAS 6.20 with add on for integration engine so ABAP proxies could work, I've been reading some threads but I think are more for SXMB_MONI in XI than in an R/3 so tose threads talk about some parameters sucha as LOGGING and LOGGING_SYNC and TRACE_LEVEL category RUNTIME, I've read the blog:
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
from Michal but I can't fin these parameters in the R/3 they don't exist does anyone have any other suggestions? thanks in advance.
Regards,
Julio Cesar Ruiz

hi,
u have to do settings in sxmb_adm.
follow the links;
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
other links u can follow:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/499240ed38ce62e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/00143f011f4b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/b714f55ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/dd0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/471241043ff06fe10000000a1550b0/frameset.htm
reward points if helpful
regards,
ujjwal kumar

No messages in SXMB_MONI for ABAP Synch Sender proxy

Hi,
I am doing a Scenario which involves ABAP Synchronous sender Proxy and Webservice at the receiver end. On triggering the outbound proxy from a report, i can see no messages in SXMB_MONI of the ECC system neither can i see any message in PI(SXMB_MONI). But on triggering the same after deleting the Receiver Determination in PI Configuration, SXMB_MONI promptly logs the message with error
"No receiver could be determined" both in ECC and PI, since there is no receiver determination.
Note:I am not getting any System fault or Application fault in Sender report neither any response message.
There is no problem with the Proxy settings since other proxy scenarios are working fine with same ECC system but those are Asynchronous proxy calls.
Any Clue about this?
Regards
Amith

HI,
YOur answer is near to my problem . Can i ask you more detailed.
I am not getting messages in SXMB_ADM. So i configured in Integration server in ECC & XI system.
IN ECC , i am using two clients, dev & testing - so in which client i have to do configuration ? and What is the role of the business system in ECC ( Integration Server or Application server )???
IN XI, i am using only one client 100...so i have done. here i have given Role of business system - HUB Integration Server.and corresponding destination http://host:port/sap/xi/engine?type=entry
And while creating business systems in SLD...
for XDC...i have given path http://host:port/sap/xi/engine?type=entry
for EDCClient105...how can i create for proxy ...Adaper XI? is it type -
WEB AS ABAP?
pls reply for my mesaages?

PL_TIMEOUT error message in SXMB_MONI

Hi..
I am doing File to RFC to Webservice to File sceanrio. While executing the scenario for first time i got the output. For second time execution, i got the below message in sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Could you please help out why this error is coming. I have done scenario correctly.

Gugel,
Check this thread and the blog:
level of trace
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Usually 1 should be good in prod.
Regards,
---Satish

Problem with scheduled message in SXMB_MONI

Hi All,
I have come accross an issue. There is a scheduled message in SXMB_MONI(with green flag). It's been there at for a long time.I can see a inbound queue name in the SXMB_MONI display. But if I am looking into the que from SMQ2, there is no pending messages in the queue. How to process this message? Can we reprocess it?
Thanks

Hi,
prerequisite:
make sure the message will not be processed in SXMB_MONI
a) restart the message from sender system
b) take the payload from SXMB_MONI and post it from RWB
directly to integration engine
test it on DEV to be sure what you're doing of course
Regards,
michal

No message in SXMB_MONI

Hi People,
I can see my message being processed in communication channel monitoring for mail adapter, but cannot see any message in SXMB_MONI.
In what scenarios can it happen?
Thanks.

Hi,
Go to SXMB_ADM and select the integration engine configuration
then select Runtime as a parameter and click specific configuration data and there need to set the parameters
1. LOGGING value to 1
2. LOGGING_SYNC value to 1
3. TRACE_LEVEL value to 3
Check this sap help guide for more details
http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/frameset.htm
HTH
Rajesh

No messages in SXMB_MONI for outbound proxy interface

Dear All,
i am executing Proxy-PI-File interface and I am not able to find any message in SXMB_MONI in the ECC side.
I have done all the required proxy configurations and also the ABAP report calling the proxy is working fine but still not able to view data.
Please guide where i am missing.
Warm Regards,
Nishant Jain

1. Debugg your report which is sending data to Proxy. Make sure data is present in the internal table.
2. Proxy configuration is client specific so make sure the client from where you are running the report has been cofigured for proxy. Check SLDAPICUST & SXMB_ADM settings once again.

Invisible messages at sxmb_moni

Similar Messages

Maybe you are looking for