Invoke checkoutView failing, map not getting read correctly?

Hi folks,
As part of our account claiming process, we change the accountId and set the password of the claimed users account. This happens in a single update. I seemed to be running into problems where the password update was happening in LDAP during the account update, then the LDAP active sync is firing off. This seemed to be causing problems (think race conditions), so I figured I would change the order, so the lighthouse provision happens first, then the password update. The password view is fetched using the following code that is being called from our update workflow:
    <set name='pwdView'>
      <invoke name='checkoutView'>
        <invoke name='getLighthouseContext'>
          <ref>WF_CONTEXT</ref>
        </invoke>
        <concat>
          <s>Password:</s>
          <ref>user.waveset.accountId</ref>
        </concat>
        <map>
          <s>authorized</s>
          <s>true</s>
          <s>subject</s>
          <s>Configurator</s>
        </map>
      </invoke>
    </set>This code is throwing errors, stating that the subject is WF_CASE_OWNER, which is the old accountId. So they run into permission denied problems. Now, why isn't the authorized or subject in the map overriding the WF_CASE_OWNER? Shouldn't it be? I can't seem to get it to check this view out this way...

I've solved my problem by using authenticated contexts. I'm not sure I saw this here, I think I found it digging through IDM APIs. I had used it in a few other spots, and remembered about it. Here is what the code looks like.
    <set name='pwdView'>
      <invoke name='checkoutView'>
        <invoke name='getAuthenticatedContext'>
          <new class='com.waveset.session.InternalSession'/>
          <s>Configurator</s>
        </invoke>
        <concat>
          <s>Password:</s>
          <ref>user.waveset.accountId</ref>
        </concat>
        <map>
          <s>authorized</s>
          <s>true</s>
          <s>subject</s>
          <s>Configurator</s>
        </map>
      </invoke>
    </set>
    <invoke name='checkinView'>
        <invoke name='getAuthenticatedContext'>
          <new class='com.waveset.session.InternalSession'/>
          <s>Configurator</s>
        </invoke>
      <ref>pwdView</ref>
      <null/>
    </invoke>

Similar Messages

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

  • JRockit_160_05_R27.6.2-20 can not get the correct os name for windows 2008

    JRockit_160_05_R27.6.2-20 can not get the correct os name for Windows Server 2008 SP1 using System.getProperty("os.name").
    System.getProperty("os.name") will return Windows Vista instead of Windows Server 2008 when running on Windows Server 2008 SP1. Is it a bug of this jdk?
    I tested it on Sun JDK 1.6. It returns the correct name Windows Server 2008.
    Any suggestion will be welcomed. Thanks in advanced!
    Edited by: user4516182 on May 13, 2010 12:59 AM

    Staffan, thanks for your update.
    Do we have a workaround for it or fix it in new release?

  • I can not get the correct anser

    Hi, Please help me.  As the following sch I can not get the correct sqrt value.  if changing resistor of R1 I always get 12v direct flow output.
    Attachments:
    op_divider.zip ‏121 KB

    Thanks for your answers.  I want the sch to do the operation of square root.
     1. in my sch the inverting input is DC -5v, I want to get the square root of 5?
     2. In my feedback path I use a multiplier, I Originally thought it is a negative feedback?
     3. it Already have ground in the sch, I do not understand that you say "did not ground the scope"?
    Thanks again, Could you give me the further pointing. if possible Could you give me a correct sch.
    (in fact, I get the sch from a rough sch in a textbook(the rough sch not for multisim). I just give the values for the all components)

  • Itunes says copying the disk "my iphone" failed. could not be read or written to, help!

    Hi, so i have never had issues with my iphone before (3gs), i have up to date software, both on phone and itunes, and all of the sudden my phone will not update my music and itunes says copying the disk "jess sweeney" iphone failed. could not be read or written. I am not sure what to do, if anyone has any insight i would truly appreciate. 

    Read through this support article:
    http://support.apple.com/kb/HT1207

  • GLPCA table not getting updated correctly for VBUND

    Hi All,
    I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
    In vendor master this field has different value versus it is showing in GLPCA-VBUND.
    Does any one knows about ?
    Thanks for your help on it.
    Regards,
    Manoj

    Hi Sridhar,
    Thanks for your response on it.
    This note is not applicable for our system as we are working on 4.0B with support pack 52.
    Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
    Please advise your thought.
    Thanks,
    Manoj

  • Excel Charts do not get displayed correctly (colour) !urgent!

    Hi,
    believe me: I spent days in research to fix my problem but could not find a solution yet...
    I use a lot of Excel Web Parts on my SharePoint Site. Basically to display charts or tables. Everything worked fine for months but out of a sudden some of the web parts do not anymore. These Web Parts still get displayed but all in black or grey and
    because of that are partly unreadable. For example: a cell with a white font and a blue blackground just gets displayed as a black cell with black fontcolour. I thought it might depends on the settings of the server computer but other colourful charts/tables
    still work fine (but on the other hand, all new web parts do not get displayed correctly...)
    I tried to remove macros, conditional formatting, creating completely new subsites with content. But the result is always the same: black cells.
    Then I tried to just use 8bit-colours and tada: it worked (except of the colour white, that still does not work).. I do not have access to the server computer. And I am wondering because some other charts still work..
    Any ideas?
    I do not use SharePoint Designer, just the browser version of 2010.
    Thanks for your help!!!

    Here is the code:
    IANode QueryContractResultNode = wdContext.nodeA();
    IBNode ToolTipNode = wdContext.nodeToolTipNode();
    QueryContractResultNode.invalidate();
    for(int i=0; i<searchContractListSize; i++)
       IAElement newQueryContractResultEl =   QueryContractResultNode.createAElement();
    WDCopyService.copyCorresponding(getList.getOutput().getI_Detail().get(i),newQueryContractResultEl);
    IBElement newToolTipEl = ToolTipNode.createBElement();
    if(newQueryContractResultEl.getParentName().length() >= 5)
         newToolTipEl.setChildName  (newQueryContractResultEl.getParentName().substring(0,4) + "...");
    else
         newToolTipEl.setChildName (newQueryContractResultEl.getParentName());
    QueryContractResultNode.addElement(newQueryContractResultEl);
    ToolTipNode.addElement(newToolTipEl);
    Node A is bound to a model structure.  Therefore, the value of A.parentName is set after the RFC execution.
    Zita

  • Not getting the correct data at reciever side

    Hi
    I have done mail adapter... My senario is Mail --> XI --> File... In this mail adapter is sender. i have give the url as pop://<ip address> the xi server is picking up the file...
    Source File Is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:Mail_Message_Type xmlns:ns0="http://mailtofiledemo.com/ravi">
       <Order>
          <Header>
             <Name>Ravi</Name>
             <Address>Vsp</Address>
          </Header>
          <Item>
             <material>Computer</material>
             <units>3</units>
             <price>90000</price>
          </Item>
       </Order>
    </ns0:Mail_Message_Type>
    Target File is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:File_Message_Type mlns:ns0="http://mailtofiledemo.com/ravi">
    <row>
       <name>Ravi</name>
       <address>Vsp</address>
       <material>Computer</material>
       <units>3</units>
       <price>90000</price>
    </row>
    I have  an unread mail in my Inbox and i have attached the source file to that mail... the server is picking up the file but in receiving side i am not getting the correct target file... i am getting the target file like:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:File_Message_Type xmlns:ns0="http://mailtofiledemo.com/ravi"></ns0:File_Message_Type>
    </ns0:File_Message_Type>
    eventhough if i dont have any unread mails in my inbox i am getting the same file at target side continuosly...so please give me the solution as early as possbile or else my folder will going to be overflow with that target file
    Thanks & Regards
    Ravi Shankar

    Ravi,
    Have to check the Transport Protocol used by internal Mail Server. The parametes you pass to the mail adapter should be same to the internal mail sever where you are trying to send and also check with XIPAYLOAD option.
    If this helps to u. Allot the points please.
    Thanks
    Gowri K

  • Maps is not working resolution is terrible not getting the correct location also unable to calculate the route message appear directions not available

    Please resolve the maps issue on iO6 as it is not working properly resolution is very bad not getting correct locations direction are not available appears while calculating route

    Please resolve the maps issue on iO6 as it is not working properly resolution is very bad not getting correct locations direction are not available appears while calculating route

  • Help me fix my email when i get the message, server has failed , can not get mail

    How do I fix my email when I keep getting the message, can not get mail, server connection has failed? In very plain basic english or even on youtube?

    Hey helpsusanplease,
    Thanks for the question. I understand you are experiencing issues with mail on your iPhone. The following article may help to resolve your issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Thanks,
    Matt M.

  • Nohup.log files are not getting generated correctly

    hai,
    im a weblogic administrator. Here is my problem in weblogic. My partner has complained that nohup.logs are not getting generated properly. Like for every 5 mins a new nohup .log file is getting generated. But almost 4 to 5 logs are of 0 size and after that the 6 log file is very hug ( around MB). And the status of the managed servers is in FAILED state. When i checked the nohup logs, i can see "E297: Write Error In Swap File" and also the below error. But when i checked the disk space it is only 30 % full. Please suggest me something that can help me in this. Why is this behavior in the nohup.logs? have anyone faced anythign like this? Please help me.
    But after the recycle everything is fine. But i want to know what went wrong and why it got recovered after the recycle.
    <Feb 11, 2010 7:43:59 AM CST> <Error> <HTTP> <BEA-101246> <Error occurred while flushing HTTP log file for the Web server: wl38_managed1
    java.io.IOException: Disk quota exceeded.
    java.io.IOException: Disk quota exceeded
    at java.io.FileOutputStream.writeBytes([BII)V(FileOutputStream.java:???)
    at java.io.FileOutputStream.write(FileOutputStream.java:260)
    at com.wily.introscope.agent.probe.io.ManagedFileOutputStream.write(ManagedFileOutputStream.java:423)
    at weblogic.utils.io.DoubleBufferedOutputStream.flushBuffer(DoubleBufferedOutputStream.java:58)
    at weblogic.utils.io.DoubleBufferedOutputStream.flush(DoubleBufferedOutputStream.java:157)
    at weblogic.servlet.logging.LogManagerHttp$FlushLogStreamTrigger.trigger(LogManagerHttp.java:522)
    at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
    at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
    at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:50)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

    according to error message, your partition size have not enough disk space from where you are running nohup command. check with df -kh.

  • Content Organizer bug - PDF files does not get routed correctly if autodeclaration is on and library level default values are set

    It looks like whenever one specifies Column default values at a library level then the content organizer routing goes a bit awry SPECIFICALLY FOR NON OFFICE FILES [e.g. PDF] . Below are the observations and issues
    1. Column level default value set on a record library with auto declaration of records turned on.  The content organizer routes the document to the library but also keeps a copy of the document in the drop off library. It does not remove it from the drop
    off library. The instant we clear the default value settings at the library level of the target library the content organizer works as expected again. 
    2. If default value settings are specified on a column in the target library then the PDF file gets routed to the document library but all the metadata is blanked out. The copy of the file that remains in the drop off library has all the correct metadata but
    the target library has blanked out metadata. 
    Are the 2 observations described above by design or are they bugs? If so is there any documentation that is available that proves this because this does not make logical sense and proving this to a client in the absence of any documentation is a challenge.
    The problem goes away if we shift the default value to the site columns directly at the site collection level. It's just the library level defaults that the pdf files do not seem to agree with

    Hi Lisa,
    Thanks for responding. This can be replicated in any environment but is only replicable for a specific combination of content organizer settings . The combination of settings I am referring to can be seen in the screenshot below. If you turn off redirect
    users to the drop off library for direct uploads to libraries and if you turn on sharepoint versioning then you should be able to replicate the issue. Also we are using managed metadata site columns. I simplified this use case to a custom content content type
    with just 2 custom managed metadata columns and can still replicate the issue in several environments. Also note the issue does not occur if the default values are set at the site or site collection level. It only occurs if you set the column value default
    at a library level.  I was able to replicate this on a completely vanilla Enterprise records site collection freshly created just to test this.  Also note that the issue is not that the file does not reach the destination library. The issue is the
    document does not get removed from the drop off library after it is transfered to the destination library which technically should have gotten removed.

  • Arabic data not getting printed correctly

    Dear Freinds,
               I have developed a smartform where in i have to print the English Name and Arabic name one below the other .
    So to ge the ARabic letters to be get printerd i have used the Device type ARSWIN,
    i can see now the data  being displayed correctly for Arabic name in PRINT PREVIEW ,however when i take printout of the same in the printer which is assigned to my system i can see that the data is getting jumbled on the printed stationery and i can very cleary see that data which is there on Print preview is different to that printed matter , so i have checked with my Arabic collegue and he said  after reading the print preview that it is getting displayed correctly but the data in the printed output paper is not correct  .
    So  I really not able to figure out why it is displaying correctly in Print Preview and not getting this printed  on the printed stationery .  Could any one please help me out what i should do in gettign the data also correctly in the Printed data on the Stationary paper.
    Thanks & Regards
    Divya.
    Edited by: Divya Kumari on Oct 3, 2011 7:48 AM
    Moderator Message: Moved to right forum.
    Edited by: kishan P on Oct 3, 2011 11:24 AM

    Hi,
    Now i understood your problem.
    I think you are using Text Elements to print Arabic Text.
    Use Include Text instead of Text Elements.
    By using So10 you can create Standard Texts.
    Note: Create these standard texts under language key "AR".
    Hope it solve your problem.
    Regards,
    Suresh
    Edited by: suresh kumar on Oct 16, 2011 6:33 PM

  • Initialization parameters not getting populated correctly during DBCA

    This problem is observed on Oracle 10.2.0.1 Linux x86 and RedHat Enterprise Linux 4 ES Update 5.
    I tried to use DBCA template file to create an Oracle database (see below for the template file content). The DB creation was successful, but the initialization parameters did not get populated into /oracle/u01/app/oracle/admin/ora10g/pfile/init.ora the way I would expect.
    ora10g.dbt template - file content
    ========================
    <DatabaseTemplate name="ora10g" description="" version="10.2.0.0.0">
    <CommonAttributes>
    <option name="ISEARCH" value="false"/>
    <option name="OMS" value="false"/>
    <option name="JSERVER" value="true"/>
    <option name="SPATIAL" value="false"/>
    <option name="ODM" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="IMEDIA" value="false"/>
    <option name="XDB_PROTOCOLS" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="ORACLE_TEXT" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="SAMPLE_SCHEMA" value="false"/>
    <option name="CWMLITE" value="false">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="EM_REPOSITORY" value="true">
    <tablespace id="SYSAUX"/>
    </option>
    <option name="HTMLDB" value="false"/>
    </CommonAttributes>
    <Variables/>
    <CustomScripts Execute="false"/>
    <InitParamAttributes>
    <InitParams>
    <initParam name="audit_file_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/adump"/>
    <initParam name="background_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/bdump"/>
    <initParam name="compatible" value="10.2.0.1.0"/>
    <initParam name="control_files" value="(&#8220;/u01/oradata/{DB_UNIQUE_NAME}/control01.ctl&#8220;, &#8220;/u02/oradata/{DB_UNIQUE_NAME}/control02.ctl&#8220;, &#8220;/u03/oradata/{DB_UNIQUE_NAME}/control03.ctl&#8220;)"/>
    <initParam name="core_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/cdump"/>
    <initParam name="cursor_sharing" value="EXACT"/>
    <initParam name="db_block_size" value="16384"/>
    <initParam name="db_cache_size" value="1" unit="GB"/>
    <initParam name="db_domain" value=""/>
    <initParam name="db_file_multiblock_read_count" value="16"/>
    <initParam name="db_name" value="ora10g"/>
    <initParam name="job_queue_processes" value="10"/>
    <initParam name="large_pool_size" value="0" unit="MB"/>
    <initParam name="java_pool_size" value="0" unit="MB"/>
    <initParam name="log_buffer" value="64000000"/>
    <initParam name="open_cursors" value="300"/>
    <initParam name="pga_aggregate_target" value="1" unit="GB"/>
    <initParam name="processes" value="300"/>
    <initParam name="recyclebin" value="off"/>
    <initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
    <initParam name="sessions" value="335"/>
    <initParam name="sga_target" value="1600" unit="MB"/>
    <initParam name="shared_pool_size" value="128" unit="MB"/>
    <initParam name="sort_area_size" value="4194304"/>
    <initParam name="transactions" value="610"/>
    <initParam name="undo_management" value="AUTO"/>
    <initParam name="undo_retention" value="10800"/>
    <initParam name="undo_tablespace" value="UNDOTBS1"/>
    <initParam name="user_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/udump"/>
    </InitParams>
    <MiscParams>
    <databaseType>MULTIPURPOSE</databaseType>
    <maxUserConn>20</maxUserConn>
    <percentageMemTOSGA>80</percentageMemTOSGA>
    <customSGA>false</customSGA>
    <characterSet>WE8ISO8859P1</characterSet>
    <nationalCharacterSet>AL16UTF16</nationalCharacterSet>
    <archiveLogMode>false</archiveLogMode>
    <initParamFileName>{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/pfile/init.ora</initParamFileName>
    </MiscParams>
    <SPfile useSPFile="false">{ORACLE_HOME}/dbs/spfile{SID}.ora</SPfile>
    </InitParamAttributes>
    <StorageAttributes>
    <ControlfileAttributes id="Controlfile">
    <maxDatafiles>100</maxDatafiles>
    <maxLogfiles>16</maxLogfiles>
    <maxLogMembers>3</maxLogMembers>
    <maxLogHistory>1</maxLogHistory>
    <maxInstances>8</maxInstances>
    <image name="control01.ctl" filepath="/u01/oradata/{DB_UNIQUE_NAME}/"/>
    <image name="control02.ctl" filepath="/u02/oradata/{DB_UNIQUE_NAME}/"/>
    <image name="control03.ctl" filepath="/u03/oradata/{DB_UNIQUE_NAME}/"/>
    </ControlfileAttributes>
    <DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/sysaux01.dbf">
    <tablespace>SYSAUX</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">500</size>
    <reuse>true</reuse>
    <autoExtend>false</autoExtend>
    <increment unit="KB">10240</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/system01.dbf">
    <tablespace>SYSTEM</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">500</size>
    <reuse>true</reuse>
    <autoExtend>false</autoExtend>
    <increment unit="KB">10240</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/temp01.dbf">
    <tablespace>TEMP</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">100</size>
    <reuse>true</reuse>
    <autoExtend>false</autoExtend>
    <increment unit="KB">640</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/undotbs01.dbf">
    <tablespace>UNDOTBS1</tablespace>
    <temporary>false</temporary>
    <online>true</online>
    <status>0</status>
    <size unit="MB">100</size>
    <reuse>true</reuse>
    <autoExtend>false</autoExtend>
    <increment unit="KB">5120</increment>
    <maxSize unit="MB">-1</maxSize>
    </DatafileAttributes>
    <TablespaceAttributes id="SYSAUX">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <bigfile>false</bigfile>
    <datafilesList>
    <TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/sysaux01.dbf">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="SYSTEM">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>-1</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>false</autoSegmentMgmt>
    <bigfile>false</bigfile>
    <datafilesList>
    <TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/system01.dbf">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="TEMP">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>true</temporary>
    <defaultTemp>true</defaultTemp>
    <undo>false</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>2</allocation>
    <uniAllocSize unit="KB">1024</uniAllocSize>
    <initSize unit="KB">64</initSize>
    <increment unit="KB">64</increment>
    <incrementPercent>0</incrementPercent>
    <minExtends>1</minExtends>
    <maxExtends>0</maxExtends>
    <minExtendsSize unit="KB">64</minExtendsSize>
    <logging>false</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <bigfile>false</bigfile>
    <datafilesList>
    <TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/temp01.dbf">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <TablespaceAttributes id="UNDOTBS1">
    <online>true</online>
    <offlineMode>1</offlineMode>
    <readOnly>false</readOnly>
    <temporary>false</temporary>
    <defaultTemp>false</defaultTemp>
    <undo>true</undo>
    <local>true</local>
    <blockSize>-1</blockSize>
    <allocation>1</allocation>
    <uniAllocSize unit="KB">-1</uniAllocSize>
    <initSize unit="KB">512</initSize>
    <increment unit="KB">512</increment>
    <incrementPercent>50</incrementPercent>
    <minExtends>8</minExtends>
    <maxExtends>4096</maxExtends>
    <minExtendsSize unit="KB">512</minExtendsSize>
    <logging>true</logging>
    <recoverable>false</recoverable>
    <maxFreeSpace>0</maxFreeSpace>
    <autoSegmentMgmt>true</autoSegmentMgmt>
    <bigfile>false</bigfile>
    <datafilesList>
    <TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/undotbs01.dbf">
    <id>-1</id>
    </TablespaceDatafileAttributes>
    </datafilesList>
    </TablespaceAttributes>
    <RedoLogGroupAttributes id="1">
    <reuse>false</reuse>
    <fileSize unit="KB">1048576</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="redo01.log" filepath="/u01/oradata/{DB_UNIQUE_NAME}/"/>
    </RedoLogGroupAttributes>
    <RedoLogGroupAttributes id="2">
    <reuse>false</reuse>
    <fileSize unit="KB">1048576</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="redo02.log" filepath="/u02/oradata/{DB_UNIQUE_NAME}/"/>
    </RedoLogGroupAttributes>
    <RedoLogGroupAttributes id="3">
    <reuse>false</reuse>
    <fileSize unit="KB">1048576</fileSize>
    <Thread>1</Thread>
    <member ordinal="0" memberName="redo03.log" filepath="/u03/oradata/{DB_UNIQUE_NAME}/"/>
    </RedoLogGroupAttributes>
    </StorageAttributes>
    </DatabaseTemplate>
    Right after DB creation using DBCA, I would expect to see the following initialization paramaters populated in /oracle/u01/app/oracle/admin/ora10g/pfile/init.ora file that match the values I specified in the template file, but it appears that some initialization parameters are either not populated or incorrectly populated.
    db_cache_size=1g
    (this parameter entry is missing, not getting popultated at all)
    sga_target=1600m
    (sga_target populated with 1211105280)
    pga_aggregate_target=1g
    (pga_aggregate_target populated with 403701760)
    shared_pool_size=128m
    (this parameter entry is missing, not getting popultated at all)
    large_pool_size=0
    (this parameter entry is missing, not getting popultated at all)
    java_pool_size=0
    (this parameter entry is missing, not getting popultated at all)
    log_buffer=64000000
    (this parameter is correctly populated)
    transactions=610
    (this parameter is correctly populated)
    recyclebin=OFF
    (this parameter entry is missing, not getting popultated at all)
    cursor_sharing=EXACT
    (this parameter is correctly populated)
    Does anyone know why some initialization parameters did not get populated or incorrectly populated into init.ora?
    Thanks in advance.
    Ken

    Likely dbca currently uses the spfile to store the parameters, as you should do too.
    Apart from that the pfile Oracle uses is located in $ORACLE_HOME/dbs/init<sid>.ora
    It is possible this file is soft-linked to the file you mention.
    If it isn't the file you mention is not being used at all.
    Hth
    Sybrand Bakker
    Senior Oracle DBA

  • Can not get reader to work e_books Sony.request sign in but refuses to accept password.

    Can not get e_books Sony to work  keeps wanting to sign into adobe

    this si the Reader forum; you should ask in the Digital Editions one,
    http://forums.adobe.com/community/adobe_digital_editions

Maybe you are looking for

  • Need help with iPod classic/Alpine stereo deck interface

    Hey All- I have installed a brand new Alpine CDE-143BT stereo deck in my car.  I have a 160gb iPod classic that I connect and control via the iPod sync cable, directly into the USB port on the deck. I currently have 113GB of music on the iPod.  The d

  • Stock Transport Order (STO)will not create delivery

    I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct. I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show

  • Essbase Studio--cannot set essbase properties at parent level

    Hi, I have a recurssive hierarchy product dimension.Source is an oracle table something like Parent child alias P p1 ap1 p p2 ap2 p1 p11 ap11 p1 p12 ap12 I have an self-join between parent and child column and have no issues related to hierarchy buil

  • Can I use oracle blob by CMP bean in weblogic 6?

    I use weblogic 6.1(sp3) and Jbuilder 7.when I try to use oracle blob by CMP bean,the errors are: javax.ejb.FinderException: Exception raised in findByPrimaryKey java.io.StreamCorruptedException: InputStream does not contain a serialized object What s

  • Right side bar problems with BC template

    I'm using the BC template that was called Cadca from themforest. It has a nice thumbnail portfolio gallery with a drop down menu called Categories. I am trying to use the Categories feature on another page WITHOUT the thumbnail feature. The problem i