IOS 6 Global HTTP Proxy Support?

Hi,
We have been trying to use global http proxy in iOS 6 Beta 4 version , however havent found a way to configure it.
Is global http proxy support available for use in iOS 6 Beta version? Is it available through configurator or ipcu?
Thanks for your help.

answer is here:
https://discussions.apple.com/message/19847523#19847523

Similar Messages

IOS Global HTTP Proxy Authentication Error.

I have been attempting to use the HTTP Global Proxy feature on a group of iPads. Unfortunately, the proxy servers that I set up are starting to get spammed and we need to activate some form of authentication to avoid this problem. I have tried many methods and the result is always the same, the iPad keeps prompting the user for the username and password every few minutes, no matter how many times they have entered it correctly.
Is there any form of authentication that works smoothly? I am currently using Squid, but could use any other, and can run it on any OS that would make it work!

Here are the relevant parts of my squid config and some examples of what are in the acl files. I downloaded the ip list from ipdeny.com. As it was, the end of line character wasn’t correct and I had to correct that before squid would read it correctly. I just copied and pasted it into a new file to correct it.
I don’t know if this is the best way to approach this, and I am sure there are some problems with it currently. I am continuing to tweak it as things come up. With all allowed domains the number of authentication pop ups I received were drastically reduced. Looking it over I already see that rearranging the allow and deny rules would be of benefit for me.
I am also using fail2ban on this server with the squid configuration file from http://www.fail2ban.org/wiki/index.php/Fail2ban:Community_Portal#Squid_filter. This does eventually block someone who gets enough TCP_DENIED 407 messages. I also had modified it to include 403 messages with some success. The amount of blocks we receive from blocking ads I would get devices locked out unintentionally but increasing the number of attempts seems to have resolved this.
squid.conf
## ACL for blocked files originally just .exe
acl blockedfiles urlpath_regex "/etc/squid/blocked.files.acl"
## ACL for blockedomains
acl blockeddomain dstdomain "/etc/squid/blocked.domains.acl"
## ACL for allowedomains
acl alloweddomain dstdomain "/etc/squid/allowed.domains.acl"
## ACL for allowed user agents
acl allowedbrowser browser "/etc/squid/allowed.browser.acl"
##Acl for Users requiring proxy authenticiation
acl password proxy_auth REQUIRED
## United States External Allowed
acl external src "/etc/squid/us.zone"
## Internal Networks
acl internal src "/etc/squid/local.zone"
##Allow access from the admwired network defined above without authentication
http_access allow internal
##Block the following based on acl defined above
http_access allow alloweddomain
http_access deny blockedfiles
http_access deny blockeddomain
http_access deny !allowedbrowser
##Allow access from all networks but require authentication
http_access deny !password
http_access allow external password
#And finally deny all other access to this proxy
http_access deny all
allowed.browser.acl
^.*iPad.*$
blocked.files.acl
\.[Ee][Xx][Ee]$
us.zone
103.246.248.0/24
113.29.0.0/17
163.60.0.0/16
192.103.43.0/24
202.72.96.0/20
203.144.48.0/20
203.187.128.0/19
3.0.0.0/8
4.0.0.0/8
6.0.0.0/8
7.0.0.0/8
8.0.0.0/8
9.0.0.0/8
11.0.0.0/8
12.0.0.0/8
13.0.0.0/8
etc…..
allowed.domains.acl
.apple.com
.mzstatic.com
.appextras.com
.google.com
.facebook.com
.gstatic.com
.amazonaws.com
.bloxcms.com
.lyveapps.com
.doubleclick.net
.googleusercontent.com
.2mdn.net
.admob.com
.mopub.com
.googletagservices.com
.quantserve.com
.exelator.com
.facebook.net
.google-analytics.com
.googleadservices.com
.scorecardresearch.com
.qwapi.com
.appspot.com
.mobclix.com
.crashlytics.com
.mm.bing.net
.verisign.com
plus some more for specific ipad apps that I had to allow

How Setting up global http proxy with profile in iphone(file.mobileconfig)

how Setting up global http proxy with profile in iphone(file.mobileconfig)

how Setting up global http proxy with profile in iphone(file.mobileconfig)

How do I find and configure the new 'global network proxy' feature in iOS 6?

The 'global network proxy' is listed as a new feature in iOS 6 but is not explained anywhere. I can't see how to set it up on the phone either.
It sounds like it might be the ideal feature I'm looking for. That is, when I connect to a random new open WIFI point, I would like a default HTTP proxy to use, rather than manually entering the same proxy for each access point that I connect to.
Is this possible? Is there any documentation for this new feature anywhere?

The old iTunes library was lost with the old PC. However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

[OSB] Invoking OSB HTTP proxy as a part of a global transaction

Hi,
my question is, can a OSB HTTP proxy be executed in context of the global transaction?
I did two tests. One had the following scenario:
HTTP OSB proxy invokes JMS OSB proxy that invokes an "Insert to database" business services.
Both of the proxies were transactional - I have set "Transaction Required" and "Same Transaction For Response" to enabled on both of them. Also, I've set QoS to "Exactly Once" in the Routing Option.
The OSB JMS proxy's flow was executed as a part of the global transaction. I confirmed this with the following test:
If I throw an exception in the responce pipeline of the HTTP OSB proxy, the database transaction was rolled back. If I throw an exception in the responce pipeline of the HTTP OSB proxy, but have the "Transaction Required" and "Same Transaction For Response disabled, the database transaction is commited and than the exception is thrown.
The problem is, If I change the protocol of the second proxy to HTTP, then it doesn't seem to be executed in the context of the global transaction. If I throw an error in the response pipeline of the first OSB proxy(and "Transactions Are Required" and "Same Transaction For Response" are enabled for both proxy, and QoS is set to "Exactly once") the database transaction is not rolled back.
So, can a OSB HTTP proxy be executed in context of the global transaction?
Edited by: user13604541 on Dec 5, 2011 2:27 AM

I have read on OSB doc that HTTP proxies do not support transactions... your tests seem to confirm this.

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

Turn off your firewall and antivirus software.

I cannot play videos because I have a "Proxy Detected..Your internet connection is currently using an HTTP proxy, content playback is not supported when a proxy is configured." How do I get rid of this "proxy"?

I cannot play videos because when I try to do so the following message occurs:
"Proxy Detected...Your internet connection is currently using an HTTP proxy, content playback is not supported when a proxy is configured." How do I get rid of this "Proxy"?

This helped me
http://mashtips.com/amazon-instant-video-http-proxy-error-on-ipad/

I am getting no HTTP proxy not supported error when I try to open HBOGo App on my iPad

When I try to open my HBOGo or MaxGo apps on my iPad, I am getting an error that states "Your current HTTP proxy is not supported by this application. Plese remove it from your Wi-Fi settings to enable video playback". I have reset the iPad, deleted and reinstalled the Apps, synced my iPad. My Wi-Fi settings are defaulted to off. Any help would be appreciated. Thanks.

To all that are getting the http proxy message when trying to view hbogo, Deggie has the right answer: go to wifi settings, when you find your wireless connection tap the arrow on the right and if proxy is on "auto" switch it to "off." I had been watching hbo go just fine then suddenly I got this message about http proxy does not support video playback, I did as Deggie suggested and Bingo.

TS3274 Every time I try to play Amazon video on iPad, it shows "our Internet connection is currently using an HTTP proxy, content playbacks not supported when a proxy is configured". Though I can play it on iPhone which has same Internet connection. Plz h

Every time I try to play Amazon video on iPad, it shows "our Internet connection is currently using an HTTP proxy, content playbacks not supported when a proxy is configured". Though I can play it on iPhone which has same Internet connection.
Can any one please help?

This helped me
http://mashtips.com/amazon-instant-video-http-proxy-error-on-ipad/

AnyConnect on Apple iOS - VPN-Connect via HTTP-Proxy

Hi,
is it possible, that the AnyConnect-Client for Apple iOS (i.e. iPAD) automatically uses the configured HTTP-Proxy in the WLAN properties for the establishment of the VPN-Connection (via SSL/TLS)?
I've tested it, but it does not work. In the documentation is stated, that VPN establishment via HTTP-Proxy works only in Windows (AnyConnect uses the IE Proxy settings to connect to the ASA for VPN establishment).
Thanks

As per w2k3 sniffer trace, 2851 requesting with user=vpnfamily and encrypted password. The password "Password1" which is VPN group's key sending to IAS?
->I have "vpnfamily" with password "Password1" but no luck
Event log shows "Fully-Qualified-User-Name = INFRA\vpnfamily". INFRA is AD NetBIOS name. 2851 router's domain name is "family.com"
->Is this something wrong?

Playback not supported by http proxy when using Amazon instant video - what to do?

Message
playback not supported by http proxy when using Amazon instant video - what to do?

Settings > General > Reset > Reset Network Settings

IOS MCM GK/Proxy Placement

Are there any issues with a Cisco IOS MCM GK/Proxy with one interface placed on the 'internal' network (which endpoints register with) and a second interface placed in a firewall DMZ (and the MCM acting as an H.323 proxy). The firewall then does static NAT (a 1:1 mapping) with the address on the interface and a real-world IP address. The firewall is H.323 aware. The other alternative is to place the 'outside' interface directly on the external network (effectively in parallel with the firewall), but this is the less-preferred option.
With the parallel model (described as co-edge in the documentation), is it possible to secure the router with suitable ACLs to prevent traffic being routed through it and limit traffic terminated on it, or sourced from it to H.323?

With your approach you may have the MCM as H.323 Proxy and NAT (on the Firewall) both the MCM Proxy and the NAT will essentially do the same (address hiding). The F/W also has to be H.323 aware (ALG).
You may want to consider a IP-IP gateway to serve your requirement. It can have a GK on the same router and do H.323 RAS, signalling and Media reorigination, thus doing address hiding. ACL on the router can give you firewalling for the router. You may choose to still use your firewall if you want a single security device.
http://cisco.com/en/US/partner/products/sw/voicesw/ps5640/index.html
The IP-IP gateway can support Voice and Video calls and can support RSVP CAC, this can be a single box solution.

How do I create a Https Proxy server

hi,
I am writing a Proxy server in java. But my pogram do not support https protocol.Could you please tell me how can I implement a https proxy server.some sample code is more helpful.
This is very URGENT for me.
Thanks
Sujith Varghese

Hi Varghese,
Reading the thread I am able to make out u r facing the same problem as I do.
current scenario#1:
Machine#1 client (using URLConnection("https://...") ----> Machine#2 (Server https port)
what I want scenario#2
Machine#3 client (using URLConnection("https://...") ---> Machine#1 (Proxy for https)----> Machine#2 (Server https port)
In scenario#1
- I have a Client machine at Location#1 which can connect to on Location#2
- I only have SSH connection to machine at Location#1
now this scenario#2 is what I would like to run so that
- I am able to connect to mc#2 at loc#2 from a machine at loc#3 with mc#3
- effectively starting a https proxy at location number mc#1 at loc#1.
Hope that clears the problem domain.
any help will be greatly appreciated.
regards-
_Jagsir

Cvs over HTTP proxy?

Hi All,
I am using openembedded tools on a project, but it uses cvs to download some files.
Our company has a tight http only proxy, but I have managed to tunnel wget and git over it, but not cvs.
Is there a good way to do this? It needs to be transparent to openembedded which has cvs access in lot's of scripts which I don't want to touch.
I notice a cvs-feature program in AUR that states that is has proxy support, but I can't find any documentation, does anyone know if it will allow what I want?
Cheers,
Bernie

Inxsible wrote:
Not a solution for you per se, but would you be able to share how you managed to tunnel wget, redacting your proxy server and port of course?
I am in a similar situation and would like to access my home computer through my work machine.
No problem. wget was easy as it takes notice of the environment variable http_proxy, ftp_proxy, https_proxy etc, so if they are set to your proxy and port like this:
export http_proxy=http://your_proxy:3128/ ..... place this in your ~/.profile or ~/.bashrc file, or without the "export" in the file ~/.wgetrc
.. then re-source your shell with "source ~/.profile"
Hope this helps.
NB: You should include "all caps" versions of those variables too, as some programs use the caps versions ..

OSB call to remote Web Service via https proxy and https CONNECT problem

Hi
I have a service that calls a web service on another server as a web service. This call is via https and the certificate validation raises no errors.
I now want this call to go via a squid httpd proxy on port 3128 on some machine. So I would like to use HTTP CONNECT (RFC 2817) proxying,. But when I set up this as a proxy, I am getting "Certificate chain" error messages. The certifcate chains is no different now from when I called without the http proxy, so what am I doing wrong? Does OSB support HTTP CONNECT?
-Johan

The exeption we are getting is BEA-380000
General runtime error: [Security:090477]Certificate chain received from XXX - 123.123.123.123 --> test.salesforce.com was not trusted causing SSL handshake failure.
This is of course not relevant if the callout were using CONNECT. In the CONNECT scenario, OSB would not care about XXX's certificate.

IOS 6 Global HTTP Proxy Support?

Similar Messages

Maybe you are looking for