IOS 8 swipe to open button missing

Just updated iPhone 5 to iOS 8 and now the "swipe to open/answer" button is missing. Any suggestions?

Hello,
I updated my iPhone5 to iOS8 and it didn't show 'Enable 3G' toggle button.
Instead 'Enable LTE' toggle button is shown.
I was not able to connect to 3G network after upgrade and only 2G was working upon enabling Cellular Data and enabling LTE.
After Restarting Phone:
1. Phone is connected to 3G network.
2. Toggled 'Enale LTE' to 'OFF' -> 3G is disconnected and connected again.
3. Toggled 'Cellular Data' to 'OFF' -> No data network connected
4. Toggled 'Cellular Data' to 'ON' -> 3G is connected again.
Now, the problem is how to disable '3G' and to start using '2G' data network?
Regards
Harminder Singh

Similar Messages

  • "Open" button missing when trying to open a pdf from IE6

    Adobe Acrobat Pro 8.1.6
    Windows XP Pro SP2
    When selecting a pdf link in a browser the only options that are available are "Save" and "Cancel".  There should be an "Open" option, which would allow the user to open it before saving it to their computer...
    Any clue why this is happening?
    Thanks!

    This is in Internet Explorer 6 (yes, horrible, I know), but we use a standardized image where I work, with pretty intense GPO's.
    Don't know what happens if you right-click the link; but from any other machine (with the same image) the same link will open with all three options "Open", "Save", and "Cancel".  These are not freshly imaged machines, so some setting must of been changed along the way to make this happen on this user's computer.
    Repaired Acrobat, but this resolved nothing.
    Also checked in IE to make sure that Adobe was enabled under the Programs tab.
    Also, the option to view a pdf within the browser is not turned on.
    Any other ideas?

  • OPEN VIEW button missing in BEx report

    Hello!
    When I open BEx report, I can see buttons for managing report. I can see SAVE VIEW, BOOKMARK, VARIABLE SCREEN, Exceptions and Conditions, COMMENTS, EXPORT TO EXCEL, EXPORT TO CSV.
    I have SAP BW 7.0 installation.
    Button OPEN VIEW is missing, although I saw this button in one other 7.0 BW installation. Why is this button missing?
    On WAD reports I can put this button on report.
    Thank you
    Gorazd

    Hello,
    Is this Java Web or Abap Web?
    Due you are on BW 700, I assume you aer using Java.
    First, the Open View button doesn't exist.
    You have to click on New Analysis and select View.
    However, per I can see you don't have New Analysis button.
    Ensure you are using the standard SAP templates.
    Go to RSCUSTV27 and let all fields blank.
    Then, re-active the 0ANALYSIS_PATTERN template.
    This should works...
    Kind regards,
    Edward John

  • Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Yes, Bridge shortcut has been removed from PS CS5. However, you can go to File->Browse in Bridge option to open the file in Br CS6.
    Similar query has been answered here.
    http://forums.adobe.com/message/4285441

  • Mail on iPhone iOS 6.1.3 Opens Single Inbox by Default, Not "All Mailboxes"

    Mail on iPhone iOS 6.1.3 Opens Single Inbox by Default, Not "All Mailboxes"
    I have five e-mail accounts linked to my Mail app (an Exchange account, an IMAP account, and three Outlook POP accounts.  Everytime I close the app (close the app meaning double tap the Home button and close it) and reopen it, the Mail app opens the first Inbox on the list.  Unfortunately, it is an inbox I rarely use, the Exchange account.  I constantly have to press back to go to my "All Mailboxes" screen and then select the correct account Inbox from there. Of course, if I don't fully close the app, but rather tap the home button once and reopen it, the app opens where it left off. 
    Is there an easier way to make the app open to "All Mailboxes" screen by default vs. the first account listed alphabetically?  Or, perhaps the app opening the Exchange account because it thinks it has a priority over the IMAP and POP accounts?
    I searched this on Google but all I could find were forums from 2010 that were never answered.
    Thank you in advance!

    Thank you TomJones75.  When I posted this initially, I was running iOS 6.1.3 and not iOS 7.  I don't think editing the order of the inboxes was an option back on iOS 6.1.3.  With your tip, I was able to re-order my inboxes but it still defaults to the Exchange account when opened.
    I.e. first account listed under mailboxes is now an Outlook account and the 2nd is an Exhannge account. Mail still defaults to the Exhange account even though the Outlook is my default email address for the iPhone.
    Good tip though!  Thanks!

  • My iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????

    my iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????

    I would attempt a reset. This is done by holding both the powerbutton and the home button for about 10 seconds for it to restart.
    When it boots back up, test the issue. If the issue persists, I would then recommend a restore through iTunes on a computer, set up as new, and test again. If it's now working, i'd recommend to restore from your last back up see if it resolved your issue.
    Hopefully the first reset solves it, in most cases it does.
    Regards

  • How can I turn off "reply" button when the messages come? I prefer the "open" button.

    How can I turn off "reply" button when the messages come? I prefer the "open" button. Because my friends usually send lots of messages at the same time so I cannot read all of them when I press "reply", then I have to go to Messages -> my friends' messages, and it's really complicated.

    Sorry for not quite understanding. I guess you are referring to a notice in an alert. I do not have that alert active on my device, so I cannot say. I use the banner alert, so I just get a notice of a message and can swipe to open that particular message. If I ignore it, it will eventually go away.

  • IOS 8 versus the Home Button

    Starting day one using IOS8, I have had issues with the home button.  Whenever I click "once" it pops up the app switcher.  It is random, and frequent and annoying.  After reboot it is "ok", but after use of the phone over a few hours, the apps begin to not close when the home button is clicked.  The problem is progressive in nature and the phone becomes difficult to operate when the only option is to switch apps or scrolls left to the home screen and select an app.
    Phone Info:
    IPhone 5, purchased 2012
    Upgraded to IOS 8 on go live day (dont yell at me....)
    Have taken all updates and currently on version 8.0.2.
    Have taken care of the phone very well, without any functional issues since purchase.
    What I have done to "fix" the problem:
    1. Soft-shutdown-reboot normally
         Result:  Fixes the problem for a few app openings.  After use for a few hours, the problem occurs again.
    2. Hard-shutdown-reboot
         Result: Longer period of time before the issue returns.  After apps are used throughout the day, will eventually become more frequent.
    3. "Reset Trick" = (Open native ios app and hold home button until app crashes)
         Result: Small fix time.  Returns within an hour of use.
    4. Set accessibility>home button click speed to slow or slowest
         Result:  No change
    Other symptoms:
    1. Apps are sluggish to open.  Clicking home button does not bring up the lock screen quickly.  Slow to load once issue has begun.
    2. Banners are slow to go away or stick until acted upon.
    3. IOS apps (native and otherwise) are slow to open in comparison to IOS7.
    Possible causes:
    1. Memory Leak of one or more apps
    2. App switching not allowing for graceful memory allocation of apps
    3. Sensitivity of button press set too high.
    4. Other??
    Any other ideas are welcome.
    TIA
    Jennifer

    pavers wrote:
    I have the same problem.  Very annoying and Apple ignoring the issue.
    When you went to the Apple store with the problem what exactly did they tell you?

  • My update buttons all turn into open buttons

    I had this happen on my iPad and it took a software update to fix.
    I open the app store (currently with a badge of 24 apps). I go to updates. All of the apps that need updated have an update button next to them, however, those buttons turn into "open" buttons in about half a second. Tapping them simply opens the apps.
    I've updated to the latest software and still no luck, it's misbehaving. This is not cool. Any help appreciated.
    Dan P.

    Hi Dan,
    If you are having issues with your App Store update buttons changing to Open buttons, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    Force an app to close in iOS
    Next, I would try restarting and if needed resetting the iPhone -
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue is still present, you may want to restore the iPhone as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • How does one change or remove the "create" or "open" button on the workspace?

    I am using Adobe Reader XI and I am having trouble changing the main toolbar. The first button seems completely immovable. In my case it is the "open" button, with an actual written label next to it. It takes me to a place where I was supposed to "Access all my files". Which is something I do not need. It takes up a lot of space though.
    Most screeenshots I have seen show the "Create" button in this place. I don't have (or need) that.
    Can you advise me on that?

    Can you post a screenshot of your toolbar: https://forums.adobe.com/thread/1070933
    Because I don't have an 'Open' icon in my Reader 11.0.10 toolbar:

  • "OPEN" button in Purchases list does nothing

    My machine is a Mac Pro (5,1; 12-core 2.4GHz; 64 GB RAM). My boot drive is a 1TB Crucial M5, holding about 350GB. There are also two 3TB and one 4TB hard drives installed in the machine. I updated to Yosemite (10.10 -- 14A389) from Mountain Lion (10.8.5) a few days ago. Afterwards App Store indicated required updates for Xcode, Final Cut Pro, Motion, and Compressor. I downloaded all of those updates to completion. On its "Updates" tab App Store reports all of them as having been installed in the last 30 days. However, only older incompatible versions of the software reside in my Applications folder. When I sign-in and inspect my Purchases list in App Store, those applications each show an "OPEN" button instead of an "INSTALLED" or "DOWNLOAD" button. Clicking the "OPEN" button installed Xcode. Clicking their corresponding buttons does nothing in the cases of Final Cut Pro, Motion, and Compressor. There are no unfinished downloads according to App Store. Before I updated to Yosemite I had updated Logic Pro X to v10.0.7. That version of the app is installed and will run. However, it is also shown as "OPEN" in my App Store Purchased list. All of this makes very little sense to me. How do I go about actually installing Final Cut Pro, Motion, and Compressor?

    Hi,
    I've came across this issue before. I had to remove the less than and greater than ("<" and ">") signs from the LOV template. Go to Shared Components --> Templates and edit the PopUp LOV template.
    Andrew.

  • Why in iOS 6 (Calendar) it opens at the next day instead of today?

    Why in iOS 6 (Calendar) it opens at the next day instead of today?

    Nope... some of these are birthday all-day events created three years ago, or more. When I edit the events there is no time zone listed, but here is what I do notice:
    When I view the "repeat" information for one of the problem events in iOS, it says "Custom." When I select that I see that it says "Yearly" instead of "Every Year." The events that do not have a problem are set to repeat "Every Year"
    The two I just compared were created in 2008 (the one that works) and 2011 (the one that doesn't). I am guessing that I created one of these events using my iPhone, and the other using Google Calendar via a Web browser. I will try to create some test events using both devices to see if there is any difference.

  • HT3819 Bought new iMac & moved (or thought so) music from old PC to new Mac. Now several hundred songs are orphaned on old PC; , I can "see" them with both machines turned on & iTunes open. "Missing" songs show in iMac Shared folder. How do I move & retir

    Bought new iMac & moved (or thought I had) all of my music from the old PC to the new iMac. Have discovered several hundred songs are orphaned on old PC; I can "see" them with both machines turned on & iTunes open. "Missing" songs show in iMac itunes Shared folder. How do I move them all so I can then & retire the old PC?

    From things you are saying, such as "shared folder" and having both machines on, it doesn't sound to me like you truly moved the whole iTunes collection. 
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option key held down and guide it to the new location of the library.
    Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html

  • After saving a file using Excel 2010 in the My Documents folder, it cannot be found using the open button in Excel 2010

    When certain files are saved using Excel 2010 to the My Documents folder, they cannot be found by using the Open button within Excel 2010.  But the file is always found using My Computer and following the path to My Documents.  What is
    even odder is that if I do a "Save As" within Excel and rename the file to the same name but with a "!" at the beginning of the name, it will then show up in the Excel Open window.  There doesn't seem to be a distinct pattern as to
    when the file can or cannot be displayed by the Excel Open button.
    I am using Windows 7 64bit along with Office 2010 64bit.  Windows has current service packs and updates.  There are perhaps 200 - 400 Excel files in the My documents folder. Some of them are .XLS and some are .XLSX.
    William Fearn

    Hi,
    Do you mean that you can't find the Excel file when you click Excel->Open->My Documents folder? 
    Do you use the other folder path to test?
    Dose the issue occur in other Office suits (Word, Power Point)?
    Do you get some error message, like "Windows cannot find 'FilePath\FileName', Make sure you typed the name correctly, and then try again."?
    Please try the following methods:
    Method1:
    1. Go to the registry. Click START, and in the RUN command line type REGEDIT and hit ENTER or click OK.
    2. Navigate to the following key: HKEY_CLASSES_ROOT\Excel.Sheet.8\Shell\Open\Command
    3. Double click on the (Default) instance over to the right. Right now this probably says something like:
    C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /dde
    Change this value to:
    C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /e "%1"
    4. Navigate to the following key: HKEY_CLASSES_ROOT\Excel.Sheet.12\Shell\Open\Command
    Again, double click the (Default) entry to the right and change
    C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /dde
    to
    C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /e "%1"
    Note : Please backup the registry key before you modify.
    Method2:
    Click the File tab, and then click Options.
    Click Advanced, scroll down to the General
    section, and then clear the Ignore other applications that use Dynamic Data Exchange (DDE) check box in the
    General area.
    Thanks
    George Zhao
    Forum Support
     Come back and mark the replies as answers if they help and unmark them if they provide no help.
     If you have any feedback on our support, please click "[email protected]"

  • TS1702 I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the documents using Adobe? I tried the open button, but I still can not get more than the first page. Thanks

    I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the PDFs? I tried using the open button at the top, but I'm only able to see the first page. Thanks

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

Maybe you are looking for

  • OS X Tiger - Help!!!!!!

    Hi I've got an old G4 Powerbook which I don't use anymore and I'm planning to give it to my Dad to mess about on now he's retired. Thing is this: I bought it from my bro 4 years ago without any discs, he bought it from someone without same. An old fr

  • Nexus N7K Sup 1 replacement to SUP2E rollback plan and EPLD upgrad time.

    Dear Expert, My customer has N7K SUP1 with HA as below and I need to replace 2  with SUP2E 6.1.2 from SUP1(6.1.1). As per Cisco document, it is required EPLD upgrade from SUP1 to SUP2E with Fabric-2 module, but there is no guide time for EPLD. Mod  P

  • LDAP error

    Hi Experts, I am facing some connection issue LDAP with SAPHR system. I'm trying to connect the LDAP server from R/3. I created a RFC and while testing the RFC ,its showing success. My problem is, I'm using the FM SPLDAP_RECEIVE_ATTRIBUTES for transf

  • Reloading photoshop CS5

    My operating system got corrupt and Microsoft is suggesting loading a new one. Ok by me on their terms but I will loose my adobe photoshop CS5 extended Win UE according to them.  My question is how can I reload it back. I have product code and serial

  • SAP PS - Incorrect Costs reflecting

    Hi Gurus I'm new to SAP PS & cProjects so am battling to understand this error. I have created a project through cProjects. All of the resources I have utilized for the project share the same Rate code (X01) which has cost of $260.00 & revenue of $33