IOS KeyboardEvent.KEY_DOWN not fired

This is basically this issue:
http://python.mmitd.com/bugs.adobe.com/jira/browse/SDK-30339
The KeyboardEvent.KEY_DOWN or KEY_UP does not get fired on iOS.
A "fix" is posted explaining you to listen for the Event.CHANGE instead which is all fine and dandy, but how then do I check for the ENTER key press. Rememer on the Event.CHANGE I don't get a keyCode.

Depending on which TextArea and your customization, KEY_DOWN may get
aggregated and applied later. CHANGE event is when the text changed.

Similar Messages

For those of you with a Windows computer and the iOS device is not syncing or showing up in iTunes. here is a known solution that has been working for tech support!

I know this seems to be an emerging issue ever since the update to iTunes 11.1.4, some iPhones or other iOS devices are not showing up in iTunes or syncing. I'm not sure if Apple really knowns of this issue, but tech support has a (mostly) sure fire way of resolcing this issue. It's only for Windows computers though.
Go to the article http://support.apple.com/kb/ts1538 and follow the Section 5 Verify Apple Mobile Device USB driver is installed. When you clik on that section, go to your version of Windows (it seems to be happening mostly across Windows 8) . And then to the section: If Apple iPod, Aple iPhone, or Apple iPad is listed.
The gist of what you need to do:
Windows 8 (since it seems to be the most affected) move your cursor to the upper ight corner of your screen) and click on the Magnifying glass. Type in devmgmt.msc and this should bring up the Device Manager. Onc eyou are in the device manager, look for the "Portable device" or "Universial Serial bus Controller" list, and you should see the "Apple iPhone/iPad/iPod" listed. Onc eyou see it, right click it, choose "Update software driver." Now, IT WILL SAY THE DRIVER IS UPDATED. I CANNOT STRESS THIS ENOUGH. Select "Browse my computer for driver software." Onc eyou choose that, select "Let me pick from a lsit of drivers on my computer." You should see the option "Have Disk." Choose that. Again, I KNOW you do not have a physical disk, but the file we need is already on your computer. After Hard Disk, choose Browse again. Follow this file path to the file we need: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.. In the Driver's folder, you should see the "usbaaple" or "usbappl64" (if you have the 64 bit for Windows). Double click on that file, and hit OK. The file should install, and once it's finished check your iTunes!!! You may want to unplug your device and plug it back it before doing all of this. I REALLY hope this works for you all as well!

How can I change my file extension from m4p to something else? I have had no success being able to play or burn my purchased music. I keep getting error 2122. If I can change the format I should be able to move it to another player or at least burn it in Nero. Thanks.
Angie

Exchange mail after iOS 8 upgrade not working

exchange mail after iOS 8 upgrade not working.
I can not get email from my exchange account.
Any suggestion?

Just had this issue. I turned WIFI off and it connected fine. Then turned WIFI back on and working as always.
It had something to do with the WIFI conflicting with the exchange server.

My iPhone 6 (iOS 8.2) not working in AirPort & AirPrint

My iPhone 6 (iOS 8.2) not working in AirPort & AirPrint

Hello ivanwutw,
Thanks for using Apple Support Communities.
It's not exactly clear what the issue is here with your AirPort Express or Extreme, but if you cannot connect to Wi-Fi on your iPhone, please follow the directions in the article below.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Take care,
Alex H.

HT4623 hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

Connect it to iTunes on a computer and update it from there.
(73609)

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

No, since the iPad 2 is iOS 8 compatible it can only be updated to iOS 8. Apple does not support upgrading to interim iOS versions, and removes those files from the servers when a new version is released. The only path for that iPad 2 is iOS 8.0.2.

Could not activate my iphone 3gs after activating to ios:5, could not activate my iphone 3gs after activating to ios:5

could not activate my iphone 3gs after activating to ios:5, could not activate my iphone 3gs after activating to ios:5
its workin with previous version of 3 os n after updatin,its showing that cannot connect to apple server n try connceting to i tunes,after doin so its showin that no sim card inserted.........i have read the similar problem in the discussions but in end of discussion the solution have been removed.............
and i dont have a proper apple store or service in coastal india near by...............
plz do a needfull help as i have only option in contacting you
plz look forward my request

touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

ITunes 11.1 and / or the Podcast app on iOS 7 will not allow me to create play lists in iTunes. Is there an app that will allow me to create podcast plays lists and play them on the iPhone running iOS7 ?

iOS 7 will not alow podcasts lists in the music app so we have to use the podcast app
but iTunes 11.1 and / or the Podcast app on iOS 7 will not show podcast play lists created in iTunes (well maybe it does but clicking on the podcasts app causes iTunes to freeze so can not select)
sometime some folders created in iTunes have appeared with the Podcast app but others not.
creating an on the go list in my iphone is agony - I have over 100 podcasts I have subscribed to and when creating a list you can not view by most recently downloadded podcast
AND you can't search (no search bar) so I have to scroll through to find a podcast that might have been updated - but they are not in any logocal order that I can work out (not alphbetical or date added).
Video podcasts are mixed with audio
podcasts I delete (unsubscribe to) keep coming back
its a disaster
my question is there an alternative iPhone app that works with iTunes
no I don't want an app where I have to download to the phone directly, thats 100 subscriptions I will have to make agaian

Agree about the disaster part. I haven't found a fix within iTunes.
I gave up and switched to downcast 2 days ago. Even though it was a hassle to re-subscribe to all my podcasts, im so much happier.
To make switching easier, I found that in iTunes you can "get info" on the podcast and copy the RSS address to the clipboard. Put all of these in a message note. When iCloud syncs the note to your phone, you can copy and paste the urls into downcast one at a time to subscribe.
Downcast has crashed on me occassionally when I'm subscribing to feeds, but so far it has recovered gracefully each time and no data was lost.

Key-nextrec not firing in forms 10g

I have a code in the above trigger, but it is not firing, I have it in the block property and no other place in the form
message('In key next rec----'); message(' ');
IF :SYSTEM.Last_Record = 'TRUE' Then
Null;
Else
next_record;
End If;

when-new-record-instance runs when you navigate to the next record.
Key-Nxtrec (Nxtrec is the correct spelling) only runs when you press the key assigned to call that trigger. In my environment, it is the Shift+ Down-Arrow key, but it could be just Down-Arrow -- it all depends on what key sequence is assigned to Forms Function Number 67 in your Forms Resource file, FMRWEB.res (or fmrusw.res).
So if the trigger runs when you press the correct keyboard key, and you issue the message but do not call the Next_Record; built-in, focus will not navigate to the next record in your running form.

Output--- automatic mail is not firing to sold to party.

Dear Gurus,
My client requirement is to sent mail to sold party when saving a sales order.
For this I creted a new output type with following assignments
In General data tab:acess sequence assigned and Access to conditions is checked
In Default values tab: Dispatch time(send immadiately), transmission medium(External send), partner function(Sp
),Communication strategy(CS01) assigned.
In Time tab: no information given
In Storage system tab :Storage mode(print and archive),Document type(SDOORDER) info given.
In Print tab: print parameters(sales org) assigned.
In mail tab: nothing assigned.
In sort order tab:nothing assigned
In mail title and texts: En and DE languages are assigned.
in processing routines: program and form routine is assgned.
in partner functions: External send+ SP is maintained.
and in condtion record maintained in VV11 tcode with details
Partner function and in communication assigned printer and selected check box print immadiately and release after out.
But automatic mail is not firing when saving the sales order, but in change sales order in menu bar selected sales document and issue output to and selected print then mail is firing to the sold to party, pls tell me where i had done the mistake.
Rgrads,
kishore.
Edited by: kishore gopala on Sep 13, 2008 1:42 PM

Check whether you have maintained the email address in the customer master of Sold to party in the General Data>Address Tab> Under Communication Area??
In the SCOT Transaction, check under SMTP (SMTP Mail Server)-->under INT (Internet) --> an '*' asterisk has been maintained or not.
Check the status of the email output in the Sales Order, is it showing with a green traffic light???
If it is showing with a green traffic light you can manually see the status of the mail mesages in Transaction SOST.(by executing, by putting the Sender Id)
If they have not gone you will be able to see them queued up there.
Select the individual messages and press execute button. By doing this email outputs will be released.
Hope this helps you.
Caution: One word of caution is that SCOT is a very critical transaction. And if you are working on a live server, do not play with it as it controls the entire SAPconnect Administration Nodes.
Hope this helps.
Regards,
Vivek

WHEN-NEW-ITEM-INSTANCE TRIGGER NOT FIRING IN FORM PERSONLIZATION

We are upgrading to R12, when-new-item-instance trigger written for radio group not firing. using USO-821 Order Administrator Responsibility the function order capture.After clicking on actions push button
opening Copy Quote for this Form Personalization written.
For Radio Group Copy-Group when-new-item-instance trigger written but this trigger not firing,but In 11i Instance its Firing.
trigger-event: when-new-item-instance
Trigger-object:copy_group
condition:when copy_group='ALL'
Action: showing message.
The same when-new-instance trigger written in form item level and trigger execution hierarchy properties 'OVERRIDE'.
Just I am thinking this overriding by Item level trigger of form.
Please kindly help me quickly .What I need to do?
How can I make trigger to Fire?
Please kindly give solution.....Its very urgent Requirement.pls help me.
Regards,
Basavaraj

Please kindly help me quickly .What I need to do?
> Please kindly give solution.....Its very urgent Requirement.pls help me.
Kindly log a SR for urgent issues.
Thanks,
Hussein

WHEN-NEW-ITEM-INSTANCE TRIGGER NOT FIRING IN FORM PERSONLIZATION(R12 UPGRAD

We are upgrading to R12, when-new-item-instance trigger written for radio group not firing. using USO-821 Order Administrator Responsibility the function order capture.After clicking on actions push button
opening Copy Quote for this Form Personalization written.
For Radio Group Copy-Group when-new-item-instance trigger written but this trigger not firing,but In 11i Instance its Firing.
trigger-event: when-new-item-instance
Trigger-object:copy_group
condition:when copy_group='ALL'
Action: showing message.
The same when-new-instance trigger written in form item level and trigger execution hierarchy properties 'OVERRIDE'.
Just I am thinking this overriding by Item level trigger of form.
Please kindly help me quickly .What I need to do?
How can I make trigger to Fire?
Please kindly give solution.....Its very urgent Requirement.pls help me.
Regards,
Basavaraj

Please kindly help me quickly .What I need to do?
> Please kindly give solution.....Its very urgent Requirement.pls help me.
Kindly log a SR for urgent issues.
Thanks,
Hussein

HT4972 i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it

i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it?

You cannot. When you upgrade, you will get the latest version of iOS 7.

Breakpoints not firing

Hello Dev's,
I am having a problem in only one project and I have even tried to recreate the project with no success but previous projects created years prier (made with previous versions of FB) are not experiencing this.
I am trying to place breakpoints on functions in deep rooted classes (a class that is loaded by a class by a class, its a smaller component from a greater project) which I know is firing as I see the results on the screen.
However the break point does not fire and remains a blue circle, indicating it won't fire. If I remove and re add the break point while the app is running, it will become checked but once I run the debugger the break point turns back into a blue dot.
If I put a break point in one of the first lines of the application class, like in it's constructor, it will trigger and then my deeper break points will fire. But if I don't make this out of the way break point (in the main class) the following break points are not firing.
Thoughts?
Flex Builder 4.5
SDK 4.5.1
Debugger 11.6.5.635 (in FireFox)

I haven’t seen that before, but in theory would be possible if several SWFs are being loaded and you get a class collision and the breakpoint in the app changes the timing of the loaded SWFs.

OnRowUpdating Event not firing in my DataGrid in custom web part in my production SharePoint 2013 Foundation instance

Hi,
I have a custom visual web part that I've developed for SharePoint 2013 Foundation. I am using Visual Studio 2013 to develop this web part.
In my visual web part I have GridView that I use to update data in a SQL 2008 R@ Server Database. In dev and test the OnRowUpdatingEvent fires properly, but in production it does not. I have the same version of SharePoint running on dev/test/prod.
The main difference between the three environments is the hardware. Production has a much beefier sever than dev and test. Dev and test are also virtual machines where production is.
At first I thought my problem was cache related, and I made adjustments per this article:
http://www.dmcinfo.com/latest-thinking/blog/id/8657/fix-sharepoint-2013-distributed-cache-timeouts
That didn't help because the event is still not firing. I took my test application and pointed it to the production database, and that event still fires in test but not in production. So I believe that eliminates database permission errors since I'm
using the same credentials in both instances.
My guess is that I need to change some settings in the production environment, but I'm not sure at this point what that might be.
Any suggestions on what settings to look at?
Brian
Brian Hochgurtel
My blog

Try this solution :
http://stackoverflow.com/questions/5893373/c-sharp-rowupdating-method-not-called-when-update-is-clicked-in-a-gridview

IOS KeyboardEvent.KEY_DOWN not fired

Similar Messages

Maybe you are looking for