Ios Push Service data consumption

why does iOS Push Service and process use as much as if not more data than iCloud when downloading apps from cloud or purchases from app store? I thought push notifications were 256byte max? During download or app sync on a device the process consumes a heap of data- almost as much as the cloud itself. It appears as though it's doubling my 3G data consumption as a result... Discovered using data man app iOS after querying excess data usage. iPhone 4s64 black 5.1.1 non jb... Does anyone have any accurate and informed information regarding this process, and how or why it consumes data when iCloud and App Store consume almost identical amounts of data.
Carbon copy the above question for Store Service Process..

HermesMercury wrote:
I'm not sure whether this is in the right section.....
There seems to be a very, very big difference between the amount of data that we are using according to our account on BT.com and the amount of data shown as being received/transmitted on our Home Hub 5.
Has anyone else experienced this sort of problem? If so, how was it resolved?
Is it possible to obtain records from BT of actual consumption over time? (Say showing data up/down per hour, or something like that)
1. You can obtain from BT your up/down data usage per day for each day for the last 31 days on a rolling basis.
2. The HH5 A resets the data down value to 0 when it reaches 4.3GB.
3. The HH5 A resets the data up value to 0 when it reaches 4.3GB.
4. 2. and 3. are done independant of each other.
5. If the Hub reconnects the values are both reset to zero.
6. Correcting for the above should mean that the total Hub values should always be greater than or equal to the total values registered by the online monitor. This is because the Hub registers data that you are not charged for.
7. It is advisable if you want to check the online monitor that you record the Hub statistics on at least a daily basis.

Similar Messages

Is there any way to find out what caused Push Services to generate 22 MEGAbytes of data traffic in less than 20 minutes?

Fortunately I was on Wifi when that happened, but my 500 MB data could run out quickly that way. According to Dataman it happened only once and I used only one other application at that time. Testing the same app with comparable usage didn't yield the same excessive data traffic. Normally Push Services comes to about 4MB per day (which in my opinion is already a lot). Though I use Wifi whereever I can, I am now really reluctant to have cellular data enabled and that's completely NOT the point of having a smartphone, or is it?
I hope someone can shed some light on this.

Sorry no, there isn't a way to turn off those reminders.
You can send Apple a feedback here http://www.apple.com/feedback/

HT1695 Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-f

Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!

cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.30 GHz
available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
available cpufreq governors: conservative, powersave, ondemand, performance
current policy: frequency should be within 800 MHz and 2.30 GHz.
The governor "conservative" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Thax

Mobile app based on web service data control and VO with VC runtime error

Hi,
Jdev 11.1.2.3.0 + mobile extension.
Windows 7, 64 bit.
Reproduceable with Android emulator but not on iOS and iOS emulator.
I can not test on real Android device because we do not have it in our office.
So I don't know wether this issue is related to android emulator only or to android in general.
Also not reproduceable by Oracle support.
I have a VO "Employees" with a VC "department_id = :departmentIdVariable" and exposed the find method for this VO via service interface in AM.
(see demo video from https://blogs.oracle.com/shay/entry/developing_with_oracle_adf_mobile?utm_source=dlvr.it&utm_medium=facebook).
In a ADF mobile app I create a parameter form and amx:listView like demoed in the mentioned video.
Whenever I test this app on android emulator I get the error below.
Exact the same page used in a second feature works fine.
I found out that the problem only occures on the first attept (this means when I open the page on the second feature first then this will fail and the subsequent call of the first page will be successfull).
The problem does not occure when the web service data control does not contain a method based on VC with bind variable.
[SEVERE - oracle.adfmf.framework - AmxBindingContext - loadDataControlById] Unable to load Data Control testDataControl due to following error: ERROR [oracle.adfmf.framework.exception.AdfException] - Unable to load definition for testDataControl.Types.findEmployeesView1DepartmentIdCriteria.findCriteria.childFindCriteria.findAttribute.
ERROR [oracle.adfmf.framework.exception.AdfException] - Unable to load definition for testDataControl.Types.findEmployeesView1DepartmentIdCriteria.findCriteria.childFindCriteria.findAttribute
at oracle.adfmf.metadata.bean.transform.TransformCacheProvider.fetch(Ljava/lang/Object;Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)
at oracle.adfmf.cache.SimpleCache.get(Ljava/lang/Object;Ljava/lang/String;)Ljava/lang/Object;(Compiled Method)(Unknown Source)
at oracle.adfmf.metadata.cache.MetaDataCache.getByLocation(Ljava/lang/String;)Loracle/adfmf/util/XmlAnyDefinition;(Unknown Source)
at oracle.adfmf.metadata.cache.MetaDataFrameworkManager.getJavaBeanDefinitionByName(Ljava/lang/String;)Loracle/adfmf/metadata/bean/JavaBeanDefinition;(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.registerAccessorAttribute()V(Unknown Source)
at oracle.adfmf.dc.JavaBeanObject.registerJavaBean(Loracle/adfmf/metadata/bean/JavaBeanDefinition;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.<init>(Ljava/lang/String;Ljava/lang/String;Loracle/adfmf/metadata/bean/JavaBeanDefinition;Ljava/lang/String;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.<init>(Ljava/lang/String;Ljava/lang/String;Loracle/adfmf/metadata/bean/JavaBeanDefinition;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.registerAccessorAttribute()V(Unknown Source)
at oracle.adfmf.dc.JavaBeanObject.registerJavaBean(Loracle/adfmf/metadata/bean/JavaBeanDefinition;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.<init>(Ljava/lang/String;Ljava/lang/String;Loracle/adfmf/metadata/bean/JavaBeanDefinition;Ljava/lang/String;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.<init>(Ljava/lang/String;Ljava/lang/String;Loracle/adfmf/metadata/bean/JavaBeanDefinition;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.registerAccessorAttribute()V(Unknown Source)
at oracle.adfmf.dc.JavaBeanObject.registerJavaBean(Loracle/adfmf/metadata/bean/JavaBeanDefinition;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.<init>(Ljava/lang/String;Ljava/lang/String;Loracle/adfmf/metadata/bean/JavaBeanDefinition;Ljava/lang/String;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.<init>(Ljava/lang/String;Ljava/lang/String;Loracle/adfmf/metadata/bean/JavaBeanDefinition;)V(Unknown Source)
at oracle.adfmf.dc.VirtualJavaBeanObject.registerAccessorAttribute()V(Unknown Source)
at oracle.adfmf.dc.JavaBeanObject.registerJavaBean(Loracle/adfmf/metadata/bean/JavaBeanDefinition;)V(Unknown Source)
at oracle.adfmf.dc.ws.WebServiceObject.registerBean(Loracle/adfmf/metadata/dcx/AdapterDataControlDefinition;Loracle/adfmf/metadata/dcx/soap/SoapDefinitionDefinition;)V(Unknown Source)
at oracle.adfinternal.model.adapter.webservice.WSDefinition.loadDataControlDefinition(Loracle/adfmf/metadata/dcx/AdapterDataControlDefinition;)V(Unknown Source)
at oracle.adfmf.dc.GenericJavaBeanDataControlAdapter.loadDataControl(Ljava/lang/String;)V(Unknown Source)
at oracle.adfmf.dc.ws.WebServiceDataControlAdapter.setDataProvider(Ljava/lang/Object;)V(Unknown Source)
at oracle.adf.model.adapter.DataControlFactoryImpl.createDataControl(Loracle/adfmf/bindings/dbf/AmxBindingContext;Loracle/adfmf/util/XmlAnyDefinition;Ljava/util/Map;)Loracle/adfmf/bindings/DataControl;(Unknown Source)
Does anyone has seen the above error ?
I have recreated the model and mobile app more than 20 times, re-installed Jdev, re-created Jdev settings (integrated WLS & Co), ran the web services on a different machine.
On my site this problem is 100% reproduceable with android emulator.
regards
Peter

Hi, Peter, this could be an issue with proxy server setting. Are you behind a firewall when you test this?
iOS simulator would use Mac's proxy setting. Android Emulator has its own proxy setup - it's a bit complicated to get to and varies based on the Android emulator you are using. For 4.1 emulator (you should always use 4.x or above emulators), you would need to go into the emulator itself, and go to settings - Wireless & Networks - click More... - Mobile Networks - Access Point Names. You should see an Access point used by the emulator to simulate network connection. Mine says "T-Mobile US". You click on it, and then you can select the proxy attribute and set it according to your office's settings.
Hope that resolves the issue.
Thanks,
Joe Huang

Web service data source - Entry 70 still missing

Hello,
I have created a web service data source in order to create a push mechanism for master data.
Before implementing and consuming it in R/3 side, I have tested the generated function module of the data source.
I have created a real time (and push) info package, assigned it to a daemon and executed the FM.
After executing the FM, my request remains in yellow and I get the message:
"...... Entry 70 still missing " .
In the Status tab I get the message "No Idocs arrived from the source system."
Kindly help, Regards.
Amir,

Thanks for the response.
1. In the infopackage I have set the automatic closure to 1 hour
2. Data is not getting loaded to the datatarget
3. When we click on assign on infopackage it gives an error ' No profile selected for web service'. When we ignore this and go to the Monitor: Real time data acquistion screen adn try to add the DTP it fails.We are not able to include the DTP in the deamon. It fails with ' Operation CHECK_STATUS_OF could not be carried out for REALTIME_DTP '
Any help in this regard will be greatly appreciated.
Thanks
Suja

Podcasts 2.1.1: Huge data cellular data consumption since update

Hi,
Since updating iOS Podcasts app to 2.1(.1), I have noticed huge cellular data consumption... Despite having disabled cell data for iOS Podcasts, the new iOS podcasts seem to be downloading again podcasts episodes that have already been downloaded and are shown as is in the app... I have lost over 1GB out of 3GB for a month among the past few days, which is pretty unusual... Seems like I am not the only one: https://twitter.com/mattdenholmross/status/469131198162558976https://twitter.com/mattdenholmross/status/469131198162558976https://twitter.com/mattdenholmross/status/469131198162558976
iOS Podcasts now often asks for using temporarily the cellular data even for podcasts episodes that are shown as downloaded.
Have you noticed the same?
Best,

It is because v2.1.1 does not delete played podcasts for a 24hr period. That holds storage that prevents you from storing new podcasts or other files.
Discussed at:
https://discussions.apple.com/message/25828362

Permanent SSL connection in background (own poll/push service)

Hello
I’m new here and I will first say hello! I'm 46 years old and I am from Germany. I work as an software developer since 1993 and I know, my English isn't the best ;-)!
Now to my questions:
I have written a client Server application which is a secure and real time (< 5 sec) alert system. At the moment the clients can be a PC (Windows, Linux or Mac) or an Android Smartphone.
The App’s have all a permanent SSL connection to the server.
So, if one client send an alert, the server can send this alert to all specified clients which are online.
Also the server can send alerts to specified client, if the count of online clients is under a specified number.
So my customers have a very high security, that in case of a fault, very fast enough employers received the alert!
Now it is on me, to create an I-Phone APP witch work as a client on this system.
I read now many documents, how can I set up a permanent SSL connection in the I-Phone APP as a background task and if I understand it right, than this is not possible.
For that functionality the Apple push service is normally used, but in case of my application there is a problem, because an Apple push notification has no guaranty about the running time.
As far as I read multitasking background function are not for network activity’s (without the APS)
Have someone an idea how can I solve my problem?
Thanks Aki

Hi etresoft,
thanks again, I'm happy that I found here so fast help.
Have you any link to a dokument, how does IOS support keep alive in a multitasking background task, I didn't find anything (maybe I searche with the wrong words)?
The main reason, why I can't use the Apple push notification service is, that then my server dosen't know, who is online and receiveable!
The second is, that I can't start die APP direct, when the IPhone is in look modus (in Android the APP has is own look screen and speak the mesage after the alert sound!).
And the third, that I dosen't know (have a garrenty), how long the message need to be displayed on the phone.
That this application drain battery is clear! On Android it is tolerable (round about 10% more or instead of 30h, 27h battery live time on my device).
For my customer 20h battery livetime, will be enought, because the divices are recharged every night.
Regards Aki

Email Push Service for Germany again - time schedule?

It there any infomration at whcih time Apple will support German iOS unsers by email push service again?

This is an interesting question... it's a sad story... push email for iCloud used to work only for about 6 months and now has remained offline for what is soon 1.5 years... unfortunately, Apple thinks the best course of action is to cut the service... this is easy (costs nothing), no need to apologize to users, no need to keep users in the loop etc.

What is "Apple courier push service"?

Why does apple keep trying to connect me to something called "courier push service"? i don't want any syncing or apple to have any of my data in the "cloud". That's WAYYYYYYY too big brotherish for me and I have serious concerns about hacking. I'll manage my own data and files thank you very much.

This should resolve your problem,
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Missing "Object Push" Service for Bluetooth/Blackberry on OS X

Hello. I had several issues that caused me to do a "wipe data" on my Curve. After I set everything back up, my Bluetooth is not working properly. I have my Curve paired to my my desktop and my laptop.
I am able to successfully send photos from my Curve to my laptop.
When I try to send something from my Curve to my desktop, it "failed because it cannot find service." This worked fine before the wipe data.
When I check the "device properties" in the "paired devices" menu, the desktop computer device is missing a "service" called "object push." Verizon and RIM have not been much help.
Any suggestions?

Found the problem. (I feel like a dope.) I needed to turn on Bluetooth Sharing in the "Sharing" prefs pane. That made the "Object Push" service available to the device.

HT1349 device object push service not available

When I try to send pictures from my computer (Windows 7) by bluetooth to my iphone 4s I receive this message
"Device Object Push Service Not Aailable"

You cannot pair an iPad to a computer for anything other than Internet tethering.
Android is not the same as iOS.

Devise object push service not available or busy

I did connect my ipad with my laptop but could not pair them as the error msg says "devise object push service not available or busy". Thing is, I could pair the same laptop with my android phone! Please any help?

You cannot pair an iPad to a computer for anything other than Internet tethering.
Android is not the same as iOS.

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Servlet to push unsolicited data to clients

Hi,
I have a servlet in which messages are XML documents in the body of HTTP requests/responses. A client sends in the HTTP/XML request, the servlet delegates processing to some service provider, gets the result, and sends it back to the client as XML in the body of the response. That all works fine.
I now want to extend the servlet to handle the situation where unsolicited data (in XML) is pushed to the client. It is not a broadcast system, the unsolicited data would be targeted at a specific client (or maybe a small number of clients).
Any suggestions of the best way to approach this kind of facility?
Thanks,
Paul

The servlet does have some knowledge of clients through session information. All clients are required to log in so the servlet can store any information it wants about each client with a session. Of course, that doesnt give the servlet the ability to open a connection to a client.
I was hoping there might be some way for the client to open a persistent connection to the servlet which would be recorded in the session data. The servlet could then use this connection to push XML data to the client at arbitrary times.
In this system when I say client I don't mean a browser. The primary purpose of this interface is to allow other systems to access services.

Data Federator - Building Web Services Data Source - Request Guidance

Hello -
I am trying to build a web services data source in Data Federator.
I have:
1. In ECC, I have created a web service, proxy, port, endpoint, etc. and am testing it with WS Navigator
2. I have created a Project in Data Federator of the type web service
    a. Here I have assigned the WSDL URL (generated in ECC) as the URL
    b. I have setup web service authentication using the same userid, pwd in the web services definition (note: I have set the
        web services authentication to 'NONE' to avoing authorization issues)\
    c. I am now trying to "Generate Operations"
I keep getting the error :
The File Access Parameters are not valid (directory path = <HERE IS THE PATH TO THE WSDL WITH THE HOST/PORT stripped OUT>; file pattern = document
I believe that it is finding the WSDL, becuase when I change the WSDL from 'Document' to 'RPC', the error changes with the file pattern = rpc.
What needs to be done to the file access parameter piece.
PLEASE provide guidance. Thanks.
- abhi

Ananya,
We are using XI to load data to BI from source system. XI basically uses the same concept as Web Services - Real time data concept via RFC embeded in Proxies.
I was using web services to test data load - eventually we will use XI.
KJs blog is pretty good. I was able to get data loaded - after several iterations and several OSS notes. It is still not perfect - there are several manual steps . I am going to pick KJs brain on that.
We are on SP10 and looks like there are several bugs in RSRDA. Some of these are addressed in SP11 an SP12.
Some notes to consider are
0001003963, 0001008276,0001009260 and 001003265.
Let me know if you have any questions.

Ios Push Service data consumption

Similar Messages

Maybe you are looking for