IOS SMTP with authentication mode: none needed

My smtp settings require an authentication mode set to None, but the option does not exist.
How can I either add this as an option or work around the issue. I do not have the option to use another smtp server for outgoing mail.

You probably have to do it on the computer

Similar Messages

Email notification to SMTP with Authentication

Sending Email Notification: What tags do you add to ns_emails.xsl to configure it for an smtp server that requires authentication? I've tried many things but none of them have worked, I looked all over the oracle forum and found a user who posted the same problem but was not given an answer.
Currently I'm using the following settings
<GeneralSettings>
<FromName>aiatestmail</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>smtp.mail.yahoo.com </SMTPHost>
<SMTPPort>587</SMTPPort>
<authenticationRequired>true</authenticationRequired>
<UserName>aiatestmail</UserName>
<Password encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">*******</Password>
</OutgoingServerSettings>
and am getting
NotificationService (sendEmailNotification) (faulted)
[2005/07/01 18:11:19] "{http://xmlns.oracle.com/ias/pcbpel/NotificationService}NotificationServiceFault" has been thrown. Less
<NotificationServiceFault xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
<part name="faultInfo">
<faultInfo>530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html</faultInfo>
</part>
</NotificationServiceFault>
I've also tried without sucess:
-without the authenticationRequired, email, and Password tags
-using the tags <email>aiatestmail</email> <Password>cb14373</Password> instead of UserName, Password in the example
-Using another email provider (netscape.net address & smtp server)
Thanks,
Craig

Additional note:
I haven't been able to test it on a server without authentication. Does anyone know a smtp server that allows this?
Also here is the full text of my config flie:
<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
<EmailAccount>
<Name>AddressChangeReviewerNotification</Name>
<GeneralSettings>
<FromName>aiatestmail</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>smtp.mail.yahoo.com </SMTPHost>
<SMTPPort>25</SMTPPort>
<authenticationRequired>true</authenticationRequired>
<email>aiatestmail</email>
<Password>********</Password>
</OutgoingServerSettings>
<IncomingServerSettings>
<Server>pop.mail.yahoo.com </Server>
<Port>110</Port>
<Protocol>pop3</Protocol>
<UserName>aiatestmail</UserName>
<Password encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">***********</Password>
<UseSSL>false</UseSSL>
<Folder>Inbox</Folder>
<PollingFrequency>600</PollingFrequency>
<PostReadOperation>
<MarkAsRead/>
</PostReadOperation>
</IncomingServerSettings>
</EmailAccount>
<EmailAccount>
<Name>TaskServiceReceiving</Name>
<GeneralSettings>
<FromName>Oracle BPM</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>dlsun4254.us.oracle.com</SMTPHost>
<SMTPPort>225</SMTPPort>
</OutgoingServerSettings>
<IncomingServerSettings>
<Server>pop.mail.yahoo.com</Server>
<Port>2110</Port>
<Protocol>pop3</Protocol>
<UserName>bpm2</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">welcome</Password>
<UseSSL>false</UseSSL>
<Folder>Inbox</Folder>
<PollingFrequency>1</PollingFrequency>
<PostReadOperation>
<MarkAsRead/>
</PostReadOperation>
</IncomingServerSettings>
</EmailAccount>
</EmailAccounts>

IOS Firewall with EasyVPN - What ports need to be opened?

I can not establish a VPN connection from my VPN client while outside, but can from inside. I assume I need to open a port on my IOS firewall but I am not sure which one. I opened isakmp but that didn't help.
This is a 2801 with 12.4(15)t. Any Suggestions? The config is attached. Thanks!

do the following change
interface Virtual-Template2 type tunnel
interface FastEthernet0/1
after u get connected u will have problem that the vpn client will get connceted and get IP from the pool but can not communicate with inside hosts!!!
becuase u need to exmpt the traffic going from inside network to vpn pool from nating
u can do it is in ur nating ACL make first line as deny source ur LAN destination vpn pool and i would suggest u to use ip addresing for u vpn pool diffrent that the LAN rnage to avoide any subneting issues
good luck
if helpful Rate

Error when creating connection with SSO Authentication mode

Hi All,
when I am creating the connection with Authentication Mode as SSO, I get error "Unable to connect to SAP BW Server User abc has no RFC Authorization for function group SYST".
When I am craeting connection with specific user id and Password it works fine.
Pls. let me know whats the problem with creating connection with SSO.
System Info: BOXIR.3.1 Sp3, SAP 7.1
Regards,
Nisha

Yes, I have installed Integration Kit, and configured the SSO.
I am able to login into designer with Authentication as SAP.
But, the Problem is with connection creation with SSo authentication mode.
Is there any property or role needs to be defined for the universe designer Group or user, so that SSO is allowed in authentication mode?
Regards,
Nisha

Usage Tracking - Access problem when Authentication Mode = Windows

Hi Everyone,
I´m working on UPK Usage Tracking configuration, in order to provide the finished training material.
1) In Server01 (on Window Server 2003) the UPK Usage Tracking is installed
2) In Server02 (also on Windows Server 2003) the Usage Tracking database is installed
3) By accessing the configuration file (http://Server01/ODSTrack/configuration/setup.aspx) on Server01,I setup the Authentication Mode = Forms
Note: The rest of the configurations were done.
4) Once the configuration from step 3 is done, I execute the traning material (on Server01) from another node of the windows network
and as a result I´m able to perform it.
5) I access the Statistc data on Server01 by accessing the file (http://Server01/ODSTrack/admin/default.aspx)and I´m also able to see the results.
6) When I execute the step 3 but with Authentication Mode = Windows, and including the GROUP name (windows group specially created for this goal where my user is included),
- I still have access to the training material (step 4)
- I have NO aceess to the statistics data any more (step 5) and the following message is display
"You do not have permission to access this page. Please contact your Usage Tracking Server Administrator to update your permissions. "
I don´t know what else I can do, and I wonder if some other configurations need to be done at windows network and/or explorer lever or any other.
Any help would be appreciated.
Best Regards//
Rubén Zamudio

Hi All,
This problem was solved by reconfiguring Usage Tracking in the authentication method (was anonymous and the solution was Windows integrated).
It is important to count on people from your organization working on Networks with some knowledge in IIS.
Best Regards
Ruben

Problems with authenticated smtp on Mac mail 2

I do support for a small ISP and we are seeing problems with Mac Mail authenticating to the smtp server. The settings that should work are:
outgoing server: asmtp.gorge.net
Username: full email address
Outgoing server port: 2525 or 587
We typically turn on password for the authentication type. In some customers, nothing seems to work. They get an error that their email address can't authenticate. Any ideas on what settings might work for this?

Teri,
Reading the guidance for Outlook Express, I note:
"Step 11. On the Servers tab under Outgoing Mail Server, check the box titled My server requires authentication. Then go to the Advanced tab. Below select the option use same settings as incoming server. (emphasis added)"
In Mail, this is normally the same as specifying authentication of None, and not entering the Username or Password again for the Outgoing Server. This type of authentication, does not result in appending the Username entry (Username corresponds to Account Name in Outlook Express). Mail will authenticate to the SMTP with the Username and Password used for the Incoming, if prompted by the server, and the separate, hard, (and redundant) authentication resulting from using Password in the Outgoing Server entry boxes will cause a failure. However, this type of authentication (which is often called SMTP after POP3, or POP3 before SMTP) is normally conducted on Port 25. In my experience, the use of Port 587 is meant for those SMTP that must have a separate authentication, and where you will see the name altered to include the Username. Hopefully this will work with Port 2525, but I have not confirmed. SMTP after POP3 authentication does not help sending from remote providers, such as found in internet cafes, and this is why some ISPs provide a SMTP that does require separate, Password Authentication.
In the new Mail Setup Assistant, there is now the option to specify to use the same settings, but not enter the Username and Password -- this is not obvious, but well known by some ISPs, but not all -- this is really the same as changing to None in an existing account, and removing the Password and Username entries. Also, in Mail, I would NOT expect any default names to appear, unlike what your Mac Mail instructions imply.
Keep me posted.
Ernie

In this apk included ALL DW Folder files incluing images (eg splash images) for iOS - non needed act

Following David Powers videos or books, instaling phonegap in dreamweaver site... well, config.xml references many splash screen image files for many platforms, well when build eg a specific binary (when upload with dw cs6 to phonegap) eg apk in this apk included ALL DW Folder files incluing images (eg splash images) for iOS - non needed actually for apk (android)?

I am sorry to have to point out to you that you have changed SpryMenuBasicSkin.css so much that it is impossible to render any assistance.
To start with, the menubar has an ID of MenuBar, yet in the CSS I only see this referenced as a CLASS as in
.MenuBar {
background-color:#cccccc;
font-family: Arial, Helvetica, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
MenuItem, and MenuItemLabel
at a given level all use same definition for ems.
Note that this means the size is also inherited to child submenus,
so use caution in using relative sizes other than
100% on submenu fonts. */
font-weight: normal;
font-size: 16px;
font-style: normal;
padding:0;
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: none none none none;
I would suggest to start again.
Once you have done that, supply a link to your site and we will assist you further.
Gramps

Help with SMTP class function with authentication

My server is no longer supporting the php mail() functionality. I need to use SMTP class function with authentication in my php code and they suggested this to replace it: http://www.yrhostsupport.com/index.php?/Knowledgebase/Article/View/101/2/smtp-class-functi on-with-authentication-in-php-code
So I tried it, but can't get it to work. This is my test form:
<form method="post" action="forms/sendmail-test2.php" onsubmit="return checkEmail(this);">
<script type="text/javascript" language="JavaScript">
</script>
<fieldset><legend>Info</legend>
<label> Name </label>
<input type="text"
name="name" size="30" maxlength="40"/><br />
<label> <span class="redText">*</span> Email </label>
    <input name="email" type="text" size="30" maxlength="40"/>
    <br />
<label><span class="redText">*</span> Message </label>
<textarea cols="40" rows="5" name="message" type="text" /></textarea><br />
    </fieldset>
<input type="reset" value="Reset" />
<input type=submit value="Submit Form" />
</fieldset>
</form>
This is sendmail-test2.php where the form goes. It won't send unless I comment out the first 10 lines.
<?php
include('Mail.php');
//$to = "[email protected]";
//$name = $_REQUEST['name'] ;
//$email = $_REQUEST['email'] ;
//$message = $_REQUEST['name'] ;
//$headers = "From: $email";
//$subject = " price quote";
//$fields = array();
//$fields{"name"} = "Name";
//$fields{"email"} = "Email";
//$fields{"message"} = "Message";
$recipients = '[email protected]'; //CHANGE
$headers['From']    = '[email protected]'; //CHANGE
$headers['To']      = '[email protected]'; //CHANGE
$headers['Subject'] = 'Test message';
$body = 'Test message';
// Define SMTP Parameters
$params['host'] = 'levy.dnsbox25.com';
$params['port'] = '25';
$params['auth'] = 'PLAIN';
$params['username'] = '[email protected]'; //CHANGE
$params['password'] = 'xxxxxx'; //CHANGE
/* The following option enables SMTP debugging and will print the SMTP
conversation to the page, it will only help with authentication issues. */
$params['debug'] = 'true';
// Create the mail object using the Mail::factory method
$mail_object =& Mail::factory('smtp', $params);
// Print the parameters you are using to the page
foreach ($params as $p){
      echo "$p<br />";
// Send the message
$mail_object->send($recipients, $headers, $body);
?>
It used to work fine when I used
$send = mail($to, $subject, $body, $headers);
$send2 = mail($from, $subject2, $autoreply, $headers2);
But they said I can't use it any more. I'm good with HTML and CSS but I don't know much about php. Thanks for any help integrating a from into this new code!

Thanks, bregent. I changed it to this and it sends, but nothing shows up in the body except "Test message". How would I "insert the form fields' 'email' and 'name' and 'message' in the body"?
<?php
include('Mail.php');
$to = "[email protected]";
$name = $_REQUEST['name'] ;
$email = $_REQUEST['email'] ;
$message = $_REQUEST['name'] ;
//$headers = "From: $email";
$subject = " price quote";
$fields = array();
$fields{"name"} = "Name";
$fields{"email"} = "Email";
$fields{"message"} = "Message";
$recipients = '[email protected]'; //CHANGE
$headers['From']    = '[email protected]'; //CHANGE
$headers['To']      = '[email protected]'; //CHANGE
$headers['Subject'] = 'Test message';
$body = 'Test message';
$fields = array();
$fields{"name"} = "Name";
$fields{"email"} = "Email";
$fields{"message"} = "Message";
// Define SMTP Parameters
$params['host'] = 'levy.dnsbox25.com';
$params['port'] = '25';
$params['auth'] = 'PLAIN';
$params['username'] = '[email protected]'; //CHANGE
$params['password'] = xxx'; //CHANGE
/* The following option enables SMTP debugging and will print the SMTP
conversation to the page, it will only help with authentication issues. */
$params['debug'] = 'true';
// Create the mail object using the Mail::factory method
$mail_object =& Mail::factory('smtp', $params);
// Print the parameters you are using to the page
foreach ($params as $p){
      echo "$p<br />";
// Send the message
$mail_object->send($recipients, $headers, $body);
?>

Unable to use iMessage on Mac with non-IOS contact with Yosemite and IOS 8.1

I have an iPhone, an iPad running IOS 8.1, and a Mac running Yosemite. I have set up all 3 to use iMessage, entering the codes as requested. The 2 IOS devices work fine and the Mac works fine on messages to contacts with iPhones but non-IOS contacts remain red and are not accepted and if I try to send a group message with a non-IOS contact I get "XXX cannot be added to the group chat - XXX is not registered with iMessage". I have tried deleting and replacing the contact and it still will not accept her. I understood that this would be fixed after updating to Yosemite and IOS 8.1 but the upgrades have not resolved the problem for me.
In my Mac iMessage preferences:
1-I am signed in with my Apple ID and the account is enabled.
2-In the "You can be reached for messages at" field, I have my iPhone number, preceded by a +1 and the area code and 3 email addresses (icloud, me, and gmail)
3-in the "Start new conversations from" field, I have my cell phone number - also with a +1 and area code.
4-I have checked all of my Apple ID and iCloud details and they are all correct.
All other Handoff features appear to be working correctly. Any help or suggestions would be appreciated. Thanks very much -
Mary Ellen

Hi,
It will suggest and look like it will auto-complete until you type further.
As 204 is unlikely to be the full number the issue does not arise.
For instance if I start typing my name every option that I have listed with my name over three Contacts card (for my three computers) and some Accounts not linked to Address Cards are listed
Of course this lists also shows cross connections between the accounts making the list longer.
10:13 pm Thursday; February 26, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc?

I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?

Thanks for your response,
I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all. Frans Vischer
author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
www.fransvischer.com
pamperedfatcat.wordpress.com

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

For another program (WASY WGeo) after the working with PS CC I need a picture with the right colours in the end with 256 colours in 8 bit per picture - I still got it until yesterday. I don´t know what I´ve done wrong in PS CC but I´m still working in mod

For another program (WASY WGeo) after the working with PS CC I need a picture with the right colours in the end with 256 colours in 8 bit per picture - I still got it until yesterday. I don´t know what I´ve done wrong in PS CC but I´m still working in mode with 8 bit RYB. I controlled my result with Irfan View: it´s a picture with 16,7 million colours and 56 bit pp.

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode
Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

You need to disable Safety Mode at the bottom of the YouTube page. More info here:
https://support.google.com/youtube/answer/174084?hl=en

I need your help with solving a non-standard solutions.

Hello!
I need your help with solving a non-standard solutions.
My name is Andrii and I represent the civil charity. Not so long ago, one man gave us the iPhone 4S (as a donation).
But later - it became known that this iPhone can not work with SIM cards Ukrainian mobile network operators, as it is blocked by Verizon.
Is there a way to unlock it with your help, and how it can be done?
I hope for your understanding and assistance in this matter!
Thank you.

Contact a third party unlocking service.
Purchase an unlocking code.

SP 2013 Upgrade error - web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode.

Hi there,
I get this error when I perform a DB Attach upgrade from SharePoint 2010 to SharePoint 2013.
"web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode."
Any help is appreciated. Thanks.

There is other way of fixing this issue apart from what Amit mentioned. Create a classic based web application in SP 2013 using PowerShell.
New-SPWebApplication -Name "TestApplication" -ApplicationPool "TestApplicationAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "sppoc\spfarm") -Port 100 -URL "http://sp2013demo"
Now mount the content database from SP 2010 on to the web application created above
Mount-SPContentDatabase WSS_Content_100 -DatabaseServer SQL2012Demo -WebApplication http://sp2013demo:100
Once the mount is complete, convert the web application to use claims and migrate the user to use claims identity.
Convert-SPWebApplication -Identity "http://sp2013demo:100" -To Claims –RetainPermissions -Force
$w = Get-SPWebApplication "http://sp2013demo:100"
$w.MigrateUsers($True)
See my blog post about it: http://www.sharepointnadeem.com/2014/01/upgrade-from-sharepoint-2010-classic.html
Please remember to up-vote or mark the reply as answer if you find it helpful.

IOS SMTP with authentication mode: none needed

Similar Messages

Maybe you are looking for