Ios8 new quick type missing on 4s

WWhen updated to 8 on my 4s it worked today it's missing how do I get it back

Hello PERshaw55,
Thanks for using Apple Support Communities.
You may have accidentally disabled QuickType, or swiped it off of the keyboard.  Take a look at the iOS 8 help article linked to below to see more.
As you write, QuickType uses predictive text to anticipate your next word. Tap a word to choose it, or accept a highlighted prediction by entering a space or punctuation. Reject a suggestion by tapping your original word (shown as a QuickType option with quotation marks).
Hide predictive text. Pull down QuickType suggestions. Pull them back up when you want them to reappear.
Turn off predictive text. Touch and hold or , then slide to Predictive.
If you turn off QuickType, iPhone may still correct misspellings and anticipate your next word. Accept a suggestion by entering a space or punctuation, or by tapping return. To reject a suggestion, tap the “x.” If you reject the same suggestion a few times, iPhone stops suggesting it.
Enter text
Take care,
Alex H.

Similar Messages

  • IOS8: Password displayed on Quick Type

    Every time I enter a name or a username on a text field Quick Type suggest me part of my password
    lets say my user name is AppleUser and my pass is OrageJuice!2, every time I enter AppleUser Quick Type suggest me OrangeJuice, the worst part is that also suggest me other passwords from other services and old passwords that I already change, I found this while trying to login to an OWA web portal, but it happens on any text inpute, like Notes

    Hello,
    i got this exact same issue on iPhone 6 and iPad AIR IOS8.0.2, even worst...it is my APPLE ID (!!!!!!) password that is being suggested!
    Even when i start typing a message, the first suggestion is this password...
    Apple, please...come on...

  • Error In Creating New Movement Type

    Hi,
    To upload the Consignee Stock, we have created a new Movement Type, say Z01 & Z02 copying the Movement Type 701 & 702.
    We are able to upload the Stock using Z01 with correct FI Entry.
    While doing the reversal, the following error is encountered:
    The mvt type in the reference docmt cannot be converted
    Message no. MIGO029
    Diagnosis
    You want to post a goods movement but the movement type that you want to use for the posting has not been maintained completely in the system.
    Possible causes are:
    The movement type is not permitted for this transaction.
    No subsequent movement type has been defined.
    You do not have authorization to post a goods movement using this movement type.
    Procedure
    Check your screen and field values.
    If you do not have sufficient authorization, contact your system administrator.
    If a movement type has not been maintained completely, the missing data must be maintained in Customizing for Inventory Management.
    Make the appropriate settings in Customizing as necessary or inform your system administrator.
    Pls. advise what to do?
    Regards,
    P K Karn

    While exploring the Mov Type 701 & 702, I came to know that 702 is not the REVERSAL of 701 as I normally assume, hence I would be wrong if we think of 702 as reversal for 701.
    Also I came to know that reversal is not possible for the documents created thru Physical Inventory i.e. using Mov Type 701.
    Basis the above observations, I can conclude that I am going on a wrong track.
    But still I am not able to find out the solutions.
    I don't to use 501, as it will generate the FI Entries which I don't want.
    Hoping some quick answers from you people.
    Also would like to request to stop me, if my LOGIC is wrong.
    Regards,

  • Accounting Document for New Movement Type

    Good day!
    Here's the scenario: I have created a new movement type in SPRO. I just copied from the existing movement type closely related to what I wanted to create. I executed the transaction in MB1C and it went well and generated a Material Document number. When I viewed the Material Document number in MB03, it has no Accounting Document number. Is there any config that i missed? How can I relate this transaction to accounting?
    Thank you for your assistance.

    hi
    first check which movement type u have copied .
    now check is ur material is valuated for the plant
    now in OMJJ go to ur movemnttype  and in update control u should have value and quantity update entry
    also check if u have used the po as free or if it is initial entry then check ur material master price
    hope it hellp
    regards
    kunal

  • How to add a new payment type

    Hi,
    We need to add a new payment type in Oracle Applications 11i and I could not find the required setup steps. The Form Name is : APXPAWKB
    The user's navigation is as follows:
    Payables super user responsibility->Payments -> Entry ->Payments:Type:
    There is a LOV with Manual, Quick and Refund and we need to add a fourth one as Elses.
    How can we do this?
    Thank You...

    Hi,
    You cannot define a payment type as that is based on a lookup defined under the navigation Setup>lookup>Payables.
    This look up access level is System whihc implies it does not allow user level values to be defined.
    So you have to use the available payment types,
    Thanks
    Manish Jain.

  • Error during creation of new movement types

    hi frnds,
        while creating a new movement type for 311 with z11....in help text tab..it is showing an error..
    " Entry HULIST does not exist in TSTC (check entry) "...how do i resolve this.
    Regards,
    Prasath

    Hey while copying the movement type to another use OMJJ
    If any table entry is missing that can be maintained in SM30
    Check it out
    Regards,
    Raman

  • How to activate New Correspondence Type

    Hi,
    I have created a new correspondence type in the following manner:
    1)Define Correspondence Types
    2)Create Report Variants for Correspondence
    3) Assigned programs to correspondence types
    4) Defined Forms for Correspondence Print.
    I have posted a document through FB70.
    When I go to FB03 and display the document so posted and select Environment and Correspondence I am unable to see the New Correspondence that I created.
    Please let me know if I am missing any configuration.
    Regards,
    Raj/

    There is requirement where in I need to generate an invoice through FB70 as we won't be using SD billing.
    In this process I am trying to activate the Correspondence. I have a particular format of the invoice. These are the steps I followed.
    1) IMG-Financial Accounting-****-Correspondence-Define Correspondence Types
    Here I checked the the Doc.necessary option. Should I also select the Acct required?
    Please let me know what other fields do I have to select here.
    2) IMG-Financial Accounting-****-Correspondence-Create Report Variants for Correspondence Types
    Not sure what Config needs to be done here.
    3) IMG-Financial Accounting-****-Correspondence-Assign Programs for Correspondence Types.
    I have assigned the Print Program name here.(Driver program as my Abaper calls it or is it different?)
    4) IMG-Financial Accounting-****-Correspondence-SAPscript-Based Forms
    I have assigned the Print Program name/Drive Program name and the Form to my company code.
    After this I posted FB70 Invoice. Went to FB03 display and selected Correspondence from the Environment. But I cannot see the correspondence that I have created.
    Please let me know what else needs to be done.
    Immediate help is very much appreciated.

  • New document type MT

    Hi,
    We have new document type "MT" for RCP transfer postings.
    But this doc type is missing the setting "Vendor" under "Account types allowed" in customizing (OBF4).
    Could anyone please guide to fix this..
    Thanks and regards,
    Priyajit

    Hi,
    Selecting the checkbox will allow you to use tht document type for the Vendor. It willnot have any other impact except for allowing that DT for vendor.
    So y ou can go ahead and check that checkbox
    regards,
    radhika

  • Why Premiere Title don´t see my new True Type fonts?

    I´ve installed several new true type fonts but Premiere´s Title don´s see them. What can I do to fix it?
    Thanks.

    Ann,
    I think that I missed something in your commets. Please help me understand. On my workstation, I've got over 9K Fonts. These are in my C:\Fonts\PS_Fonts, \\TT_Fonts and \\OTF_Fonts folders. The only ones that show up in any program are the ones that are "installed" in my system. I cannot "test drive" any of the non-installed in any program, that I know of, except, of course, Extensis Suitcase.
    What am I missing? Maybe, I'm about to learn something really new and neat?
    Thanks,
    Hunt
    PS to the OP, do you have a list of the Fonts, that are not showing up? I'd be curious to see what they are. I've seen times that some of the Asian Fonts did not show, even when properly installed. There is a "patch" from MS for those, but cannot find the link. I believe that some Arabic Fonts also need a special "patch" from MS. Do any of yours fall into these catagories?

  • Exchg rate from new exch type X is not picked up in Treasury transactions

    Dear All,
    I am maintaining a new exchange rate type for treasury transactions called "x". I have made all the settings required for this. Following is the series of steps configured to pick up the exchange rate maintained for type "x" for a Interest rate instrument foreign currency transaction.
    *Genaral Settings*
    1) Define exchange Rate(E Rt) type 'X'.
    2) Define translation ratios for curr translation
         X     usd     inr     1:1
         X     inr     usd     1:1
    3) Define new doc type "ZF" with exch rate type "X"
    4) Define Exch rate calculation indicator
         02     X     X
    *Treasury settings*
    5) Define company code additional data
         Rate Calculated     02
         Rate type(Debit)     X
         Rate type(crdit)     X
    6) Assignment of valuation areas to accounting codes
         ER type      X
    7) Define account determination
    Doctype "ZF" assigned to the relevant posting specs
    Document Splitting
    8) Classify doc types for doc splitting
         ZF     0000     0001
    9) Exch Rate of "X"
    X     01.01.2006     usd     47.36     inr
    after maintaining all these details I am trying to post an FC transactio using tcode TBB1. Everything is fine no errors nothing I can post the document also but THE EXCHANGE RATE MAINTAINED FOR TYPE X IS NOT PICKED INSTEAD RATE FOR TYPE M IS PICKED UP".
    please advise if i missed something. I am not able to trace why the SAP is picking rate from type M when I made settings to pick the rate from type X.
    Rgds
    Komal

    Hi
    Generally for posting FI documents (which is what this T Code does) , M alone is used which is the standard SAP system functionality. For other purposes like valuation, translation, etc. we can have different exchange rate types.
    Jayaram

  • Creating a request based on a new request type

    Hi all,
    We are trying to create a request for updating the SPM FF ID authorization.
    We created a new request type since the path for this WF is different from other paths that we configured.
    We based the initiator for this new WF on a new request type called "SPM change FF ID" that holds the actions CHANGE_USER, ASSIGN_ROLES and SUPER_USER_ACCESS (we added the action SUPER_USER_ACCESS because the first stage in the WF is the "SPM Controller" based on the controller that the FF ID has in SPM).
    When creating the request we populate the user ID field in the request with the existing FF ID that has a controller defined for it in SPM + we indicate the new roles to assign the FF ID via entering the "select role" functionality.
    After pressing the submit button we receive the error "Error creating request. Approver not found".
    What are we missing?
    Thank you for your help

    Shira,
    Sorry, just re-read your post. Am I correct in thinking that you want to use the Controllers assigned within SPM to act as the approvers in CUP?
    If so, what support pack version are you on as I believe that this only works in SP08 due to a technical bug. This also impacts the SPM Owners acting as approvers.
    You may also wish to check the connectors and authorisations of the connector IDs as without being able to read the tables, the approvers may not be found.
    Simon
    Edited by: Simon P Persin on Nov 16, 2009 4:37 PM

  • New Output type for purchase return excise invoice..?

    Hi all
      For purchase return process with exisable material.
    Here I m using the transaction
    1.J1IS to create purchase return excise invoice and
    2.J1IV for posting to accounts & print purchase return excise invoice
    .In standard SAP the output for purchase return excise invoice is JEXC.
    here my query is started,
    ABAPer created the new program for purchase return output with all new layouts,
    And from functional side i have defined new output type for the same as YEXC copying from JEXC.
    While doing the transaction J1IV, i getting the output type YEXC, i m not able to print preview.
    To proceed further i need some body guidence. Like where to assign the output type.
    some body can give some inputs .
    Thanks
    sap-mm

    Hi AP thanks for ur immediate response.
    But i have done all the configuratuion in NACE only.
    There in nace i m not able find out the mistake or missing configuration.
    Can u expalin me step by step process end to end .
    Thanks
    sap-mm

  • Creating new document types

    Hi,
    i've opened a call at SAP Support for following request and the support has relegate me to the forum/ solution managers:
    For some, especially for one customer, is it very important to get new types of documents.
    For example:
    The credit memo. The credit memo makes an inventory entry.
    The customer als needs an credit memo which doesn't make an inventory entry.
    The seccond one for example is an notice of receipt: A customer of our customer send an item as a RMA. Our customer wants to make a kind of an notice, that this/ these item/s are arrived..
    this one has to be take over in a bill of delivery when sendig the fixed item back to the customer
    and so on....
    It is important to make new document types in B1, set their own characteristics and their own possibility for take over in other documents...

    Hi...
    I've written down my suggestions here because the support can't help me farther.
    The B1 Support told me that here are members of the Solution Management team in the Forum (View SAP Support Number 1028874 - Missing Functionality / Product Development Collaboration). But - none of my "wishes" have been answered.
    Whats wrong here?
    A simple thing like "Will come in the next Patch" or "Is not manageable" will be enough for me.
    It's essential for our customers to get these functions or know when it will be implemented!
    Thanks!

  • New order Type setup in Oracle Apps 11i

    Hello All,
    I setup a new order type for a new organization. When i want to select 'Invoice Source' for the order line type in 'Transaction Types', I see nothing in the list of values.
    The Invoice Source is already defined and is working for other order types for existing organization units.
    Regards
    AM

    Thanks for your response.
    A transaction type (INV) is already defined in AR. This is what is assigned to an existing organization. I set up a new org and am trying to create a new order type for this org.
    Here is what I am doing:
    1) In order Management--Setup , created a new Transaction Type (New_Line). Transaction Type Code is Line, order Category is Order. The Sales Document Type defaulted to 'Sales Order'
    2) Then i defined a Transaction Type (New_Order) and assigned the Line Flow (order type --->New_Order, Line Type-->New_Line, Process Name ->Line Flow - Generic)
    I am running into two issues.
    1)  Can't assign the Invoice Source to the New Line Type I just defined; and
    2) When I book an order, I get "No workflow assigned ..." Error.
    Am I missing anything,
    Thanks
    A/M

  • Vendor returns with delivery(new delivery type)

    Hi,
    I configured vendor return process with delivery. it's working fine with delivery type RLL but when I try to copy "RLL" and create new delivery type it's still picking delivery type "RLL" and not the new delivery type.
    My configurations
    1. Create new delivery type copy of "RLL" - LE - shipping - new delivery types
    2. Assigned new delivery type to all the plants - MM-Purchase- purchase order - return orders.
    Am I missing something?
    Regards,
    R.S
    Edited by: Jeyakanthan A on Dec 21, 2011 11:04 PM

    I found the missing config. delivery type determination for outbound delivery was missing. It's working fine now.

Maybe you are looking for