IP copy function fails - ST01 trace stops at FM SYSTEM_RESET_RFC_SERVER

Production error when copying one planning version (v01) to another version (v99) in the same planning cube.
This works in lower environments - not in production. We think it is either master data or something on ABAP / BASIS side. No glaring difference is noticed in master data b/t environments (ie 0PROFIT_CTR, 0COSTCENTER, etc...).
Upon execution of the "copy" function, we get the 500 internal server error screen with the following text:
The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program CL_RSR_FIPT_SID2VAL_PREFETCH and form TRANSFORM-01- (see long text)
This stopped working in the past few days. We're wondering if the data grew, and has exceeded some sort of timeout parameter?
A trace in lower environments has the function running through a variety of FM calls - in production, it ends with a call to this function module: SYSTEM_RESET_RFC_SERVER

Hi,
planning function work with characteristic values, the planning buffer is using SIDs. The conversion failed for some reason. You can use transaction RSRV to check the characteristic values in the SID, P and Q tables. The exception TRANSFORM-01- is raised when for a SID the corresponding characteristic values was not found.
Regards,
Gregor

Similar Messages

Copy function in ciscoworks secmon stopped working

Is anyone on this forum aware of any problems with adobe flash player and JavaScript?
The reason I am asking is that for some reason the actions/copy to clipboard function in our CiscoWorks SecMon console has stopped working. I did some searching and came across some article the say the flash player 10 interferes with the copy function in a lot of JavaScript and I was wondering if this could be the cause of the problem.
Thanks in advance for any advice.

Is anyone on this forum aware of any problems with adobe flash player and JavaScript?
The reason I am asking is that for some reason the actions/copy to clipboard function in our CiscoWorks SecMon console has stopped working. I did some searching and came across some article the say the flash player 10 interferes with the copy function in a lot of JavaScript and I was wondering if this could be the cause of the problem.
Thanks in advance for any advice.

IPod function fails and music stops

I was coming home from work tonight. When I was listening to music, not doing anything else, music would stop, phone would go back to main screen.
This happened at least a dozen times...in my pocket...in my hand...it would just stop...much like when safari fails (constantly!).
Any tips?

Reset the phone and see if it does it again.

Copy function failing

When I edit>copy nothing happens. What am I doing wrong?

When I edit>copy nothing happens
that's common behavior on MacOS..
.. What am I doing wrong?
hit Apple-V to insert the 'copy' ...

No reference data for copy function between two infoproviders

Hello,
I am trying to copy data from an actuals cube into a plan cube. Both cubes are assigned to the same multi provider.
The planning function is defined as follows:
Characteristics to be changed: InfoProvider (from: Actual; to: Plan)
Condistions: none
To keep it simple I am using a filter with no entries.
When I am executing the copy function with a trace I find that the function reads the entries from the Plan Cube (which I expected) but it does not generate the entries that are available in the Actuals Cube in the plan cube (which I hoped it would do). It seems that the function cannot find any reference values in the Actuals cube.
The structure of the two cubes is different. Could this be the reason that the copy function does not work?
I will appreciate any hints.
Cheers,
Sven

Hi,
The structure of the cubes being different is not a problem. Anyway, the records get aggregated depending on the characteristics you have included in the aggregation level on which the copy function is created. Because you say not even one record is getting copied from the actuals cube I feel there is some basic problem. Check the below things (some might sound very basic but I am just noting them)
1) Actual cube has data in an active request with green status
2) You have identified the characteristics and key figures properly in the multiprov (on which the aggregation level is built) from both the cubes.
3) In the copy function, you have selected the desired KFs to be copied.

HT1449 Help! This all runs quite smoothly until i get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.

Copy function stopped working

Copy function stopped working in Numbers 2.2 (516). The Copy command in menu is still active, but it copies nothing. Any ideas how to solve this?

First reboot the computer.
Second make sure the keyboard is plugged in (if it is a desktop).
Third confirm the copy key combination work in other applications
Fourth see if you over rode the key combination in the System Preferences > Keyboard preferences pane

Item Conversion Template Issue for Oracle Migration - Copy functionality

Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PM

Issue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi

Copy Function at a parent Level

Hi Experts.
We are trying to copy data from one category 'member' to another. We want this copy functionality only a particular Entity(which is a parent member). When we execute the copy package and give the selection for the parent entity(Both in the source and destination selection), the package is failed showing that " No Authorisation to write data to a parent member".
The situation can be better explained with the following example:
Category : Budget, Actual
Entity A
Sub entites : 1, 2, 3(Which has parent as "A")
When I execute the copy package, I am giving my selection fields as follows:
Source:                     Destination:
Actual                        Budget
A                                A
Where I want the data in 1,2,3 entites of actual to be copied to Budget.(As 1,2,3 are children of A)
Is this a feature of BPC where we cannot copy the data of all the base entites of a particular parent member??
Any suggestions on this would be helpful.
Thanks in Advance
Regards,
Chandra

HI Pkrishnas,
Thanks for the reply.
Actually, this a feature which we need to give to the user. If the user wants actual data of the previous cycle as the current cycle budgeted data for his particular unit, he uses the copy option, otherwise he ignores it. So, he should have the option to select the entity.
Moreover, the child members of the parent is not restricted to 3, they may in some cases be 50 to 60.
Considering the above two cases, we cannot go for copy at a base level, as it will result in hectic exercise.
Regards,
Chandra

ASSIGN_TYPE_CONFLICT in copy-function

Hi,
I'm having a problem in BSP0.
When I execute a copy-planning function (the option "execute with trace").
BW is giving me the message:
"0 data records were read, 0 of them were changed, 52 generated".
The moment I click on the "save"-button, BW throws me the error message "ASSIGN_TYPE_CONFLICT" in a GP-program.
The copy-function is based on a "multi planning area".
The function just copies version "#" to a variable version, and 1 planning area to another one.
Does anyone knows what causes this problem?
Thank you.

Hi,
I checked the infoobject Version, and it exist in the destination cube.
The infoobject Version doesn't exist in the source cube, that is why we copy from "#" to variable input.
How can I check your first proposal?
What I found strange is that the GP-program (that gives the error) wasn't regenerated.
How can I do that?
The report is GP4N5NAZ6...
Generated report: infocube write
Template: RSTMPLWIDTP
RSAUInfocube: name of destination cube
Author: AAAA
Date: ...
Do not change this report
The error took place in
FORM convert_v2_dtp
Thanks

Consolidate Problem. Copying files failed. The File name was invalid.

Hi to everyone,
My system is 10.5.8, iTunes 9.2.1 (4)
I tried to consolidate my iTunes library to an external HD. After about 100GB of copied music, I got the message : Copying files failed. The File name was invalid.
Now everytime I try again to consolidate, I get immediately this message. I am looking everywhere for a solution, and I only find the same problem for Windows iTunes users.
Actually I found very useful this thread:
http://discussions.apple.com/thread.jspa?threadID=1708372,
which talks about with which order iTunes consolidates the media, so by digging a little in the folders to find which track has the problem and make the fix. It says that consolidate start copy the files by the date added order. So I can go in my new iTunes media folder and find the latest added track, then go back in iTunes, sort by date added the songs and locate the next song, to make the fix. However in my case, all previous and next songs (by date added), have been copied in the new locations.
I am stuck. I have a remaining 300GB of music to consolidate and dont know how to proceed.
Any help would be much appreciated..

Finaly, I managed to solve it by myself...,
following the help I found from the post of the thread I mentioned on my question...
What was the problem that made things more difficult in my case, is that a big amount of songs have been added at the same time, with just a few seconds time distance. So it was tougher to locate what was the last imported song, and where iTunes consolidation had stopped. Actually I had groups of about 100 songs with the same timestamp of date added and the consolidation was following the rule of the "date added" but not exactly with the order the songs was showing in the iTuned library. So I started checking all the songs very close to the last added in the media folder one by one with the "show in finder" command, and then I managed to found what was the one with the problem.
Regarding the problematic file, that was a midi file that had been imported in my iTunes.
I hope this will help anyone else that might have the same problem as me in the future.

Copying music failed. The file name was invalid or too long.

I went to consolidate my music, but when it got about 2/3 of the way through, it stopped with the error message, "Copying music failed. The file name was invalid or too long." I don't know which file it is referring to. How do I find this out?
I needed to cosolidate so I could backup the entire library to DVD. Now I'm left with two partially complete libraries with many duplicates.

To find out which file it was, look at where you were
copying them too and see which was the last file
copied - and then go back to your source, and go to
the next one - it should be that one.
I just wanted to add that I had the same issue (failure to finish copying and "invalid or too long" error msg) and at first didn't see how looking for the last file copied would work since iTunes is copying into folders.
Duh.
Reverse sort by date modified (newest folder at the top of the list) then drill down to the folder containing the files being copied. Voila. There was the (missing) culprit, and I knew which file to rename in the source folder.
Thanks for the kick in the brain pan.
Sony VAIO PCG-V505ACP Windows XP Pro

Error "COPYING MUSIC FAILED. The disk could not be read from or written to"

After following the procedurest to move the iTunes music, the computer started whirring away, happily copying and consolidating all the song files to the new target folder.
After copying 68gigs of 130gigs perfectly, it stopped dead and the following iTunes error message appeared:
"COPYING MUSIC FAILED. THE DISK COULD NOT BE READ FROM OR WRITTEN TO"
I am copying to an external LaCie 500g hard disk, and the current music file is split between folders on the laptop and folders and a 2nd external LaCie Hard disk. It did not appear to have any problems copying and consolidating files from both locations, until the error message showed up.
How can I solve this?
I really need to consolidate this music file.
macbook pro Mac OS X (10.4.6)

OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks.

Reducer error occurs - copy file fails from D to C while running recovery cd in windows 8,64 bit.

Sir I bought a new hp envy 15 j049tx on 25 October 2013 and it stopped working on 29 october 2013.Whrn I opened the laptop a blue screen appears written that "Your pc ran into an error and we are restarting for you. The laptop restarts and the same process keeps going on.
I told the Hp customer support, they asked me to run hard drive and memory tests. Both hard drive and memory test came out PASSED(both quick and extensive tests). Then they ordered hp recovery discs. When i received it while running the 1st cd an error came with label REDUCER-copy file failed from D... to C.... They then sent a technician who said that the recovery cd are faulty. Its Been a month and the problem still persists. They have ordered a new set of recovery cd. I hope to receive them by 22.I am very much worried. Its windows 8,64 bits os. Please reply. Is it recovery cd problem? Please tell what to do?

anyone found the fix for this?

Standard BPC Copy Package Fails

Has anyone experienced the standard copy package failing in BPC? I get the error message: 'Object variable or With block variable not set'.

I tried to submit data via an input template and received the same error (Object Variable or With block variable not set). I checked the security and the ID has all functionality access. The member is a base member. I also had the server rebooted and still no luck.
Below is the detail log of the copy pkg:
TOTAL STEPS 3
1. Dump:           completed in 3 sec.
2. Convert:        completed in 3 sec.
3. Load:           Failed in 2 sec.
[Selection]
CLEARDATA= No
RUNLOGIC= No
CHECKLCK= No
(Member Selection)
Category: ACTUAL
Time: 2006.JAN
RateSrc:
Rate:
InputCurrency:
(Destination Member Selection)
Category: ACTUAL
Time: 2007.JAN
RateSrc:
Rate:
InputCurrency:
[Messages]
Object variable or With block variable not set

IP copy function fails - ST01 trace stops at FM SYSTEM_RESET_RFC_SERVER

Similar Messages

Maybe you are looking for