IP Trace easo - whats the first 2 hops?

Just checked the tracert to easo and now the first 2 hops have changed to this? What has changed?
Host Name                                      IP Address           Hop    Ping Time   Ping Avg   % Loss    Pkts r/s   Ping best/worst
* Unknown Host *                               0.0.0.0              2      0ms
* Unknown Host *                               0.0.0.0              3      0ms
* Unknown Host *                               217.41.217.125       4      5ms
* Unknown Host *                               212.140.235.234      5      10ms
* Unknown Host *                               217.41.169.93        6      10ms
* Unknown Host *                               217.41.169.107       7      9ms
acc1-10GigE-3-2-0.sf.21cn-ipp.bt.net           109.159.251.89       8      10ms
core1-te-0-4-0-17.ealing.ukcore.bt.net         109.159.251.57       9      15ms
transit2-xe0-1-0.ealing.ukcore.bt.net          62.6.200.118         10     14ms
t2c4-xe-9-1-0-0.uk-eal.eu.bt.net               166.49.168.53        11     15ms
xe-4-0-0.edge4.London2.Level3.net              212.187.201.125      12     24ms
ae-0-11.edge3.London2.Level3.net               4.69.200.125         13     43ms
ae-3-3.ebr1.Paris1.Level3.net                  4.69.141.86          14     112ms
ae-71-71.csw2.Paris1.Level3.net                4.69.161.82          15     120ms
ae-72-72.ebr2.Paris1.Level3.net                4.69.161.97          16     105ms
ae-42-42.ebr2.Washington1.Level3.net           4.69.137.54          17     110ms
ae-82-82.csw3.Washington1.Level3.net           4.69.134.154         18     110ms
ae-3-80.edge3.Washington1.Level3.net           4.69.149.145         19     112ms
EA-INC.edge3.Washington1.Level3.net            4.59.144.74          20     112ms
* Unknown Host *                               159.153.93.2         21     110ms
* Unknown Host *                               159.153.225.30       22     103ms
meav5-pub.pt.iad.ea.com                        159.153.226.105      23     103ms

the first one is not my router I have excluded that one
gameplay is still the same

Similar Messages

Under "preferences" and the "security" tab, I don't know understand what the first 3 options mean. I checked all three and now my browsing is greatly hindered.

in preferences under the security tab, I do not understand what the first three options mean. I checked all three, and now my browsing is greatly hindered.
== I checked the first three options

Hello lea,
this is what those mean:
Warn me when sites try to install add-ons :
With [[Customizing Firefox with add-ons|Add-ons]] you can enhance Firefox's experience. However, some add-ons can be malicious so that's why Firefox warns you before installing them by default.
Block reported attack sites :
Attack sites are those sites that can install malware on your computer. Normally, Firefox blocks that. The same goes for
Block reported web forgeries , where Phishing sites are being blocked. See [[How the phishing and malware protection in Firefox works]].
Also, those information can be found in the [[Options window - Security panel]] KB article.

WHATS THE FIRST STEP TO ADDING TEXT TO YOUR NEW WEB SITE?

WHAT'S THE FIRST STEP TO ADDING TEXT/CONTENT TO MY NEW WEB SITE?

Create a new file of the HTML type. (CTRL-N). Then type or paste text.
Images you add to your new site must first be included in the site folder. Then you can drag and drop them.

Windows users iMac is coming, whats the first thing I should do

I just got a shipping notification that my iMac will be here in 4 days.
I'm a Windows user, never had a mac. What are the first things I should do when I add the iMac to my network and turn it on?

Hi, unpack it carefully, open the bottom of the box and slide the box off the mac. Set up exactly according to the instructions. Before connecting to your network I would run it for a few days and ensure it's ok. I would not install any 3rd party Apps until you are sure that the mac is 100%. Did you purchase Applecare?
Are you intending to use ethernet or wireless? This book may be helpful, my daughter & I learnt a lot from the advice & info -> Teach Yourself Visually. OSX published by Visual...Happy Mac'ing...Don't forget the forum is here to help..L

How to print a method trace to a file (first method called to the end)

I have a tomcat war that I am deploying. I want to use some command line parameter or some tool that will show me a method trace of each method that gets executed.
There is some static initializer in the code that starts everything in the war (the war is not a web app) but simply a process that runs in the background that does stuff.
I want to find out what the first method called in the war is and to locate the static initializer. Having a method trace would do this because this method would be printed out first.
After the static initializer gets called I want to see a method trace of all methods called. Having this printed to a file like Class:Method(params) would be nice.
Even better would be some sort of tool that I could open a trace file with and see method calls in the order they were called.
I tried several Java profiling tools but none of them show me the order (first to last) of the methods called. All I need is to see a method trace from beginning to end.
Any help would be appreciated.

JProbe provided almost everything I needed to see a method call trace. The method graph feature was great.
I have a single static class with a static initializer that runs in a loop but did not know what the class name was (I inherited some code and was told about the static initializer).
So when I fired it up in JProbe it showed me the class running off the root thread. In fact I found another static initializer that was unknown to me and another oddity as well.
The only problem is that the method call graph is collapsed and you need to click [+] to expand every method call.
I am told by JProbe support that there was an "expand all" option in JProbe 7.0 but it is not there in 7.1.
Not sure why they took the time, money and energy to take a needed feature out.
It would be great to have something that did the same thing from the command line or to be able to print a method call trace out to a file but not sure how to do this.

New Macbook: What's the first step?

Hey everyone. First of all I would like to say that I have read a lot of the posts and really been able to gain a lot of knowledge about all kinds of stuff, so thanks.
My question is pretty simple for those who have opened their macbooks, hah. I am getting a new macbook really soon and i was wondering what the first thing i should do is. Do i turn it on, use it till about 40 percent then charge it up, or start fully charging it right away and calibrating it. I've read a lot of the info on battery care and all those links posted of that sort, but i was just curious as to what i should do first.
Thanks a lot for your time!
I appreciate the help

Below are some good links for you. Discharging your battery to 40% will do nothing for your battery. That is a long term storage number that is bandied about on the forum and in my opinion used incorrectly by some people. Follow the instruction in the calibration link I gave you. Be sure to not miss letting the battery chemistry resettle after charging and discharging. I am referring to step 2 and 5 in the procedure. Those are steps some people miss and the reading on the monitor is not accurate.
These are good things to know about the MacBook and it's battery.
MacBook reduces processor speed when battery is removed while operating from an A/C adaptor
Apple portable computer's battery does not show a full charge in Mac OS X
You should calibrate your battery at least every month or two. I do mine every other month and have had no problems.
Look here and here for some good tips about battery care.

Download went fine, no problems, but what is the first page?

My download of 3.0 went just fine, but I don't know what the first page is. Can anyone tell me what it is? It looks like you can type there, but I don't know what it is.

This is where you can search your iPhone.
Contacts, apps, songs etc!
Give it a go!

How do I find out what the internal error was?

I got a fatal internal error when I pressed the "Show Errors" button under Windows->Show Errors menu option.
Silly me, I didn't write it down. When I relaunched LabView, it offered to go and try to diagnose the error,
but not I can't find any trace of what the error actually was! Obviously, I should have written it down,
but why didn't Labview also record the error?

Hi Doughera!
When you say: "When I relaunched LabView, it offered to go and try to diagnose the error", do you mean that LabVIEW gave you the option of Investigate Now, Investigate Later, & Do Not Investigate? Assuming this is what you are referring to, by choosing either Investigate Now or Investigate Later, LabVIEW will generate an error log .txt file. This file is automatically placed in your My Documents\LabVIEW Data\lvfailurelog folder.
Hope this helps!
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments

Using RowID to get the first instance of a value in a table

I have a table of the structure
SECURITY(
COMPANY_ID NUMBER,
SECURITY_ID NUMBER,
CUSIP
One company can have many CUSIPs asociated with it and I want to find the best way to find any valid CUSIP for the company_id using PL/SQL.
Here is my approach, I would like any other suggestions or comments.
SELECT
rowid INTO v_row_id
FROM
SECURITY
where COMPANY_ID=v_company_id
and rownum<2
SELECT
CUSIP INTO v_cusip
FROM
SECURITY
where rowid=v_row_id

Hello
If you don't specify an order you will let oracle decide what the "first" row is. It may be the first row that was inserted, it could be the last, or it could be any other row for that company. If the execution plan for the query changes (or a number of other things) the first row returned could change. This may of course not matter to you at all but it's worth pointing out I think:
create table dt_test_SECURITY(
COMPANY_ID NUMBER,
SECURITY_ID NUMBER,
CUSIP varchar2(20)
--generate some test data
SQL> insert into dt_test_security select mod(rownum,200)+1,mod(rownum,10)+1,to_char(rownum) from dba_objects where rownum <2001;
2000 rows created.
SQL>
SQL> SELECT
2     CUSIP
3 FROM
4     dt_test_SECURITY
5 where
6     COMPANY_ID=1;
CUSIP
2000
200
400
600
800
1000
1200
1400
1600
1800
10 rows selected.
SQL> SELECT
2     CUSIP
3 FROM
4     dt_test_SECURITY
5 where
6     COMPANY_ID=1
7 and
8     rownum<2;
CUSIP
2000
create index dt_test_security_idx2 on dt_test_security(company_id,cusip);
exec dbms_stats.gather_table_stats(ownname=>user,tabname=>'DT_TEST_SECURITY',method_opt=>'FOR TABLE FOR ALL INDEXES FOR ALL INDEXED COLUMNS');
SQL> SELECT
2     CUSIP
3 FROM
4     dt_test_SECURITY
5 where
6     COMPANY_ID=1;
CUSIP
1000
1200
1400
1600
1800
200
2000
400
600
800
SQL> SELECT
2     CUSIP
3 FROM
4     dt_test_SECURITY
5 where
6     COMPANY_ID=1
7 and
8     rownum<2;
CUSIP
1000If you use MAX(cusip), you will get the highest cusip against the company which is much more specific. Is that what you want? How are you intend to determin which is the first row, or doesn't it matter?
HTH
David

New Mac Pros won't connect to the first startup volume

I have five new Mac Pros running 10.4.8; I set a couple network volumes as startup items which has always worked fine before. But on these new machines, no matter what the first startup volume is, it gives me this error:
Connection failed
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
Then goes on to connec to the next volume fine. We have a Win2K Server and a Win2003 Server, and it acts the same way with both of them. It seems like something on the Mac must be timing out too fast. I have checked the logs and they don't help me at all. I have repaired permissions, run FSCK, done all the periodic maintenance and safe-booted but none of it has helped. Any ideas what I can do? Thanks!

Though this TIL says 10.3.9 or earlier, I find this might apply...
"Selecting the "Connect automatically when starting TCP/IP applications" option in Network preferences can sometimes cause this issue. "
As well as a few other possibilities...
http://docs.info.apple.com/article.html?artnum=106464

Defaulting a dropdown to the first item in the list

I have two dropdowns in InfoPath 2010. The second dropdown gets populated depending on what the first dropdown is set to.
Example: If the first is set to Florida, the second will display all the cities in Florida. If you set the first to Georgia, the second will change to a list of cities in Georgia.
The problem is that it defaults to a blank line, I need the first item in the second dropdown to populate with the first item in the list.
I've scoured the web but I can't seem to find a solution.
Any solutions or workarounds?

Hi,
To achieve your requirement, creating cascading dropdown fields with InfoPath.
Please refer to the following blogs about creating cascade drop down in InfoPath form step by step:
http://blogs.msdn.com/b/bharatgupta/archive/2013/03/07/create-cascading-dropdown-in-browser-enabled-infopath-form-using-infopath-2010.aspx
For the issue that second dropdown defaults to a blank line, add a formatting rule to the first dropdown. Refer to the following articles:
http://www.pointbeyond.com/2011/11/20/cascading-dropdowns-in-infopath-2010/
http://msreddysharepoint.blogspot.in/2012/12/infopath-2013-web-browser-creating.html
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

IPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
Thank you and good luck!
General info and specs
First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
http://www.apple.com/batteries/iphone.html
http://www.apple.com/batteries/
... you didn't read it? loll Always remember this i.e. the definition of "usage":
Usage: Amount of time iPhone has been awake and in use since the last full charge. The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
Optimize your settings
Depending on how they are configured, a few features may decrease your iPhone battery life. For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals. The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power. Go to Settings > General > Bluetooth and set Bluetooth to Off.
Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas. Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls. To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
Adjust brightness: Dimming the screen is another way to extend battery life. Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions. Go to Settings > Brightness and set Auto-Brightness to On.
Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life. To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact. Go to Settings > iPod > EQ and tap Flat.
Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
Standby time: Up to 200 hours (0.5% per hour drain)
Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
Video playback: Up to 10 hours (10% per hour drain)
Audio playback: Up to 40 hours (2.5% per hour drain)
So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
Apple's test methodology for claiming the specs:
http://www.apple.com/iphone/battery.html
Procedures
davidch tips (reset+full discharge recharge):
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
ram130's variant of davidch i.e. additional steps:
Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (till it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the                 infrared is off after the reboot).
7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
* I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
buxbuster tips(wifi sync, iCloud):
These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
Workaround number 1. Deselect wifi-sync in iTunes and press sync.
If that doesn't work try :
Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
rolandomerida tips - i.e. buxbuster and additional steps:
Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
This is what I did:
1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
4.Turn Wi-Fi on.
5. Add the iCloud account again.
That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
This is the MacRumors discussion:
http://forums.macrumors.com/showthread.php?t=1256807
And dont' forget to check buxbuster's fix, video, and THANK him!
Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
As for 4S battery life. Try doing this,
1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
2. Settings>Notification>Calendar ... turn off the Notification Centre.
3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
Try these 3 steps first... if it still drains a lot, try the following,
4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ... tap backup to iCloud from your iPhone. It will take a while if the file is huge.
Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
Once it's all done restored. Turn off your iPhone,.. and turn it on again.
Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
Good luck. Let us know if it works for you.
W. Raider tips (Sirii):
Bottom line for me of things that helped battery life are:
1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
Hope this is helpful!
Comments
jmm514 remarks (Twitter):
I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
tmksnyder comments (notifications, corrupt data in iCloud):
For me, I found my iphone on wifi mysteriously connecting to my mac. I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud. The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x). Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone. It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification). I also found that iCloud control panel on OSX would error if I tried to delete the file. I fixed it by removing the App and doing a hard reset which stopped the sync. I probably could have turned off iCloud document sync in the phone but didn't think of that. My battery life has greatly improved while at home on wifi.    I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery. It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage. My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby. I was amazed.   Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event. I could drop my percentage by 5-10% in a matter of minutes when doing updates.   I think a lot of our problems are background processes, associated with iCloud, notification, and apps. More features means more battery.   I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden.   It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks that occur for the service on an os level not an app level. This minimizes the load so there arent a bunch of apps all runing and constantly checking. The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone. No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed. If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery. I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message. On nights I get no notifications, I see a 3 or 4 percent drop. On nights with a number of notifications, i have seen up to a 10 percent drop. Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain). For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info. I think it has a good overview of how the notifications work.

Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable.
Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent. If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
http://mcaf.ee/ricdt
The original solution still represents a high level of success for users having any battery issues.
Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
Make sure your device can run iOS 5.0.1 and is not altered.
Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
Reset the device doing a hard reset and software reset.
Let battery drain and then charge for the full cycle, which is 24 hours.
I think you will find you will get the battery usage that APPLE has stated for the device.
Best of luck, stay safe and thanks

I am trying to upload a project with multiple tracks to iTunes. only the first track seems to be uploading. what do I do?

I am trying to upload a project from garageband with multiple tracks to itunes but only the first track is uploading. what do i do to make them all upload together?

Couple of questions:
What type of Tracks are they (MIDI, AUdio, Drummer)?
WHen you play your Project, do You hear all Tracks playing?
What happens when you change the Track order, i.e. A-B-C to B-C-A? WHen you export, do you still get only one Track and if so, is it talways the first Track in the list or a specific Track regardless if it is the first, second, or third?
Are you sure you don't have any Tracks Muted or Soloed (which auto-mutes the other Tracks)?
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

ICloud, Calendar, and app store unresponsive. What can I do? (This is a second attempt to describe my problem(s); the first was very unclear).

After upgrade to 10.9.1, iCloud, Calendar, and app store are unresponsive. What can I do? (This is a second attempt to describe my problem(s); the first was very unclear).
- Clicking Calendar brings up nothing but the banner "moving calendar to server account", a message that does not change.
- Clecking the App Store (dock symbol or Application list) brings up a message: "Cannot connect to App Store".
- Softare Update is unresponsive.

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

Tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

I tried connecting to iTunes and neither the PC nor iTunes recognizes the device. I went through all the troubleshooting on the Apple website for this issue and nothing worked. I've reinstalled iTunes, the driver, everything and still can't get either the PC or iTunes to recognize the phone. I don't know what else to do :-( any help or suggestions are highly appreciated!
I would hate to have lost all my info, especially contacts and calendar items since I have no idea what was backed up prior to the phone getting locked on this screen. I've been told that my only option is to go to the phone carrier and they will reset it for me, but that means it will wipe out all the info.
I hope someone has a fix other than that one.

IP Trace easo - whats the first 2 hops?

Similar Messages

Maybe you are looking for