IPad 1 internet connection issues for months--connects to modem fine

Was hoping the 4.3 upgrade would solve my issue, but it hasn't. I've had issues with my iPad for the past few months. It connects to my wireless network and works for some time (say a day or two) and then it suddenly cannot connect to the internet. The signal strength is strong. The IP addresses look the same as when it could connect to the internet, my iphone connects just fine (as does my laptop). I've upgraded modem firmware, changed modem login, tried WPA and WPA2, renewed lease on ipad, forgot network, extended my modem lease time, etc. But, I still have issues. I can unplug my modem and then the ipad connects fine...for a while. The only thing which keeps me connected for a while is to turn off my wifi everytime I'm done with my ipad...not exactly what I want to do. Any suggestions out there? Also, I should note that my ipad did not encounter any of these issues for the first 6 months of its life. I'm guessing an OS upgrade created all this nonsense.

turn wifi off on another device. some routers have limits if no result do this
reset network settings
restart your router make sure all lights are off and then come back on
then
reset network settings
settings-general-reset-reset network settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
Peace, Clyde
<Edited by Host>

Similar Messages

Internet Connectivity issues for iPad 4G

I'm an apple fan since 2001
And Recently I bought and iPad 3 4G 64gb, it was really a delight but suddenly apple announced iOS 6 and I updated and it was a disaster
1. Very Slow 3G Connectivity
2. Very Slow Wi-Fi Connectivity Plus inability to get Wi-Fi from the same distance as before
3. App store is slower than ever
4. No youtube app which was amazing
5. Maps are not so bad but slower and inaccurate
6. The compass is always stuck giving errors
7. Battery donot last 10 hours as promised
8. Very Slow safari
That is all
But the Most important is the Internet Connectivity

Hi,
This issue is still persisting. A Technician had come in on Friday and basically found nothing wrong..told me that the router is fine..issue might be somewhere else.
worked fine over the weekend and again broke down last night..had to call again and that customer service representative was of no help and didnt even schedule the appointment correctly for today.
I am strongly thinking of cancelling the service very soon.

Connection dropping for a few minutes randomly, reoccuring issue for months now

So my Too long, didn't read I'll just post now: Is there anyway to speak directly to an elevated support technician? I'm tired of having to spend half an hour each time I call just to get to someone who can tell me to do more than just reset the modem/router, and that they are sending a signal, and that they are "changing some settings" on the modem. And here is my full story: In december I moved into a different apartment. They hooked everything up, things worked ok for about 2 weeks. Then I would get this issue where my gateway would drop connection out of nowhere. The Power light would stay on, but the DS and Online lights would go off, and then come back on a few minutes later. This became a consistent thing (a few times a day, ranging from internet being out for 30 seconds to an hour). I called, they brought a new modem, worked for about a day, same issue again. I called again. They brought another modem. Worked for a day, same issue again. I called again. They came out, this time they changed the coaxel running to the modem from the outside. Worked for about a day, same issue again. I called again. They came out, guy checked the signals and all that, put a new splitter on, checked the box outside that is attached to the apartment building, that goes to the powerline on the street. He updated some wiring that was in there. This worked for about a few weeks! success I thought. A few weeks later, same problem. This time a tech comes, says he remembers being here (He was the guy that came out for the initial install) and said he'd put in a work order for a truck to check the lines on the street. He didn't even bother checking any of my equipment because he knew it wasn't my stuff. Well this seemed to do the trick, or so I thought. I never actually got a call or email or anything that the truck came, so I just assumed the truck came and they checked the lines on the powerline because my internet was finally stable for a month. And then yesterday. The. Same. problem. Comes. Back. I call, and for now the 5th or 6th time, I have to go through their resetting script, even though I clearly state my issues, what has been tried, that they determined it wasn't my equipment and got a truck to check the lines on the powerline, and they IGNORE ALL THAT AND DO THE SAME THING WE'VE ALREADY DONE, SEVERAL TIMES. I am thoroughly, thoroughly upset at this point. I don't know what to do. All I want, is internet that doesn't cut out randomly, for more then 3 or 4 weeks. I can understand it cutting out "once in awhile", maybe one time for a few minutes every few weeks. I'd be happy with that at this point even. But I pay 180 dollars for my tv and internet package. This is UNACCEPTABLE. Is there a different number I can call, or someone I can write to? I need to know how to get this issue looked at by the proper personnel, or have them taking it more seriously then just checking things one time and being done with it.

I experienced the same problems for a month or more. I was as frustrated as you sound. In fact, I told them that the only new package (Evidently they are required to try to get you to upgrade your service when you call for problem resolution) I was interested in was ATT U-Verse. (Grin). I was very frustrated. I took additonal steps. I ran a seperate Coaxial cable across the floor of my house to disprove the "House wiring is bad" theory. I bought a new modem myself because mine was a year or two old. And who am I? They may have been correct. And yet my trouble continued. Finally, after some very angry calls to some poor ladies and men in some unknown country, I was finally contacted by somone in my local service area (South Florida) last night. "Tech 1" came out and replaced my sevice line from the pole to the house. He was still not satisfied with the signal, so he passed it on to the next level. An hour later "Tech 2" showed up and adjusted some settings he could only access by going up in the air. I will say this, and hopefully not jinx myself, that my modem connects instantly now. Both of these men were professional, they answered my questions. They worked hard, it is 90 degrees today. Both of these men told me that they would monitor my connection status throughout the next week. My major complaint now is "Why did it take so long to get help"? Once I got through to the "Front Line" things got better really fast. All of this work was accomplished today, Sunday, by cheerful, friendly people who helped me. If anyone from Comcast/Xfinity monitors this, please, commend the two techs who came to help me today. Another good thing might be to dispatch these people sooner, rather than put an electronics technician like myself, through that same script over and over again for a #%#$%^ month. Yes I have the cable connected, Yes it is plugged into my computer, no there is no router, hardwired not wireless. By all means send a refresh signal. You can't see my modem, well my modem sees you!

Internet connectivity issues for past 3 days

Hi, I live in Westchester county and since past 3 days, I have no internet connectivity in the evenings. Internet works fine early morning though. Called tech support every day. On second day, the tech support helped us figure out there was an outage in the area and someone from the techical dept was fixing it..Internet started working and all was fine..
But again yesterday, same issue. Called tech support again and this time they could tell me if it is an outage or something else is broken..
If someone is facing the same issue, any information provided would be helpful

Hi,
This issue is still persisting. A Technician had come in on Friday and basically found nothing wrong..told me that the router is fine..issue might be somewhere else.
worked fine over the weekend and again broke down last night..had to call again and that customer service representative was of no help and didnt even schedule the appointment correctly for today.
I am strongly thinking of cancelling the service very soon.

Wifi Connection issues for all devices on BT infin...

Hi All,
I recently did a home move and moved my BT infinity from previous address (which worked fine and I had 2 drop outs both 2 minutes long over 3 months) but I have been "using" BT Infinity since Saturday morning and the issues will not stop.
I connected laptops, iphones and consoles to the Wifi and at first i should have been getting 30MB but speed checkers came back with 20mb. Later on that day the connection dropped to less than 2mb on the playstation 3 and then around 5mb on iphones, i even sat right next to wireless router and was getting 15mb, half of what i should be getting.
I enabled port forwarding for the playstation 3 which made no difference, i changed the channel from 1 to 11 and this made no difference, i then called BT helpline (who ran a line test and no issues were found) and connected my laptop via Ethernet cable, she remote assisted me and reset all of my router settings then ran a speed test, it came back 30mb??? then she asked i disconnect cable and try same test with wireless this came back at 33mb, so they said there was no issue.
The second they got off the phone i did a speed check and it was showing half.(around 15mb)
over the whole weekend connection has been dropping out or dropping so low that it really feels like im wasting money.
I have not even dared to set up the BT Vision as the TV will just not be watchable.
I am completely stuck on what to do and have really lost faith in BT, how can the connection jump around that much, each time i run a speed test i get different results, several times during the day the wifi just stops, have turned off router 3 times total which made no difference.
is anyone else getting these sorts of issues? I thought AOL was bad but i went from no issues with a max 1.5mb speed to endless issues with a sporadic connection that goes from half a meg to 22meg (only ever got 30meg result while on the phone to BT which is suspicious)
I know it could be teething issues but at my old address it worked straight away and as i said above was fine in terms of uptime.
Any help would be great, would also love some steps on obtaining info the send to BT to prove there is an issue.
Hope this does not sound like an angry rant but i wasted my whole weekend trying to sort this out (during best heatwave in uk for sometime :-( )
Many thanks

Just ran a speedtest using bt checker, results are not good....
FAQ
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
3044 Kbps
0 Kbps
35309 Kbps
Max Achievable Speed
> Download speedachieved during the test was - 3044 Kbps
For your connection, the acceptable range of speedsis 12000-35309 Kbps .
Additional Information:
IP Profile for your line is -35309 Kbps
2. Upstream Test: -provides background information.
Upload Speed
5151 Kbps
0 Kbps
10000 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 5151 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 10000 Kbps

Connectivity issues for random phones in CUCM 8.6 on Vmware

I have a client that has problems with around half of there ip phones (6921 & 7945) after a situation with overheating in the serverroom.
The solutions was a 1 Publisher, 1 subscriber setup with each on a separate Vmware server.
The Publisher is connected to the Core Switch which is further connected to 4 distribution switches which again connect to 5 more distribution switches. They have around 200 ip phones connected to these switches that get assigned IP's with DHCP.
The physical disk that the Subscriber was on was destroyed the incident. The Publisher they recovered, but to do this they had to recreate the vm descriptor file and attach it to the flat-file.
So the current situation is that the system is running with only 1 Publisher and no Subscriber.
There is also a license warning in the CCM Admin section, stating a License Overage (2 nodes used, but only 1 licensed.)
The license status is not invalid though, and the license state is "Uploaded". This second node I suppose might be the Subscirber that no longer exists? The phones have more than enough licenses.
When powered up the system seems to run as it should, but only about half the phones have connectivity to and can register with CUCM.
I have tried to reboot some phones remotely by cutting the power on the switch interfaces where they are attached, but that made no difference.
The console log on the phones that are down show TFTP Timeout & File Transfer Error.
The phones that are up and running can be pinged successfully from the CUCM cli, but when pinging the others I get "Destination Host Unreachable".
The strange thing is that it seems completely random as to what phones are up or down. On all switches there are connected phones with both working and non-working connections to CUCM.
To try to pinpoint the fault I chose 2 devices on the same switch and compared the config for each interface, one that has connectivity and is registered, and one that does not have connectivity and is unreachable.
Everything seems to be identical so I can't see what causes this error on the one, but not on the other.
Also when I ping the ip phone with no connectivity to CUCM from any of the switches, the ping is successful.
Anyone know what could be the cause of this behaviour?

Hello and thank you for your time.
The phones get there IP’s from a DHCP Server (Not the built in one in CUCM, but an external server). I have tested that the DHCP process works by powering off a phone (one of the phones with connectivity issues), deleting the lease, and then powering the phone back on and seeing the device request and receive a new lease.
There is only one CCM group active and both servers are in this group with the Publisher as highest priority server. All phones are in the same Device Pool attached to this group.
There are a lot of warnings regarding dbReplication & missing node due to the subscriber being gone. Also there is an issue with NTP server (see below). I will post more on this tomorrow morning.
I have also attached the console log from one of the phones that can't register.
NTP Alert:
At Tue Jan 13 21:24:10 BRST 2015 on node 192.168.50.2; the following SyslogSeverityMatchFound events generated: SeverityMatch : Critical MatchedEvent : Jan 13 21:23:49 CUCMPUB user 2 ntpRunningStatus.sh: Primary node NTP server; 192.168.50.6; is currently inaccessible or down. Verify the network between the primary and secondary nodes. Check the status of NTP on both the primary and secondary nodes via CLI 'utils ntp status'. If the network is fine; try restarting NTP using CLI 'utils ntp restart'. AppID : Cisco Syslog Agent ClusterID : NodeID : CUCMPUB TimeStamp : Tue Jan 13 21:23:49 BRST 2015 SeverityMatch : Critical MatchedEvent : Jan 13 21:23:53 CUCMPUB user 2 ntpRunningStatus.sh: The local NTP client is off by more than the acceptable threshold of 3 seconds from its remote NTP system peer. The normal remedy is for NTP Watch Dog to automatically restart NTP. However; an unusual number of automatic NTP restarts have already occurred on this node. No additional automatic NTP restarts will be done until NTP time synchronization stabilizes. This is likely due to an excessive number of VMware Virtual Machine migrations or Storage VMotions. Please consult your VMware Infrastructure Support Team. AppID : Cisco Syslog Agent ClusterID : NodeID : CUCMPUB TimeStamp : Tue Jan 13 21:23:53 BRST 2015

If I connectivity issues for appletv

I have a password on my network but when I connect my appletv it never asks for the password, how do I input my password so that I can connect?

When I reset and try and start from the beginning I am able to pick my wifi, it says connected, and then it goes to the "activating" think screen. I think it would stay there forever. If I try to bypass that it goes to "setting date and time..." Where it says in fine print on the bottom that "if the date and time can't be set, press menu and check your network settings under settings > general > network" all of which I've tried. I have a network password but it never asks for it? If I click on my neighbors Internet it asks for the password, but not when I click on mine? In regards to your actual question, when I click on menu the screen comes up "home sharing" and gives me the options: "computers" or "settings"

Connection Issues in the Connection Manager

Good Morning Friends,
I hope i will get some answer or some directions here . I have been trying to find a solution for months. I have two servers TESTSQL(2008R2) PRODSQL(2008R2) . On these twos servers i have a package that loads data from source databases into the staging tables
in the data warehouse. The source servers were 2005. The packages were running great with no problem. They have upgraded the source servers to 2008r2 and now the package on the PRODSQL(2008R2) is not working. I'm getting the connection manager connection error.
we have checked all the possible places (like nameof the instance, firewall -- all the servers are internal servers). The package on TESTSQL is able to connect to the source servers and this is how we have been running the package for the time being. Please
see the below error. Any documentatiuon or link will be of great help.
TITLE: Connection Manager
Test connection failed because of an error in initializing provider. Login timeout expired
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online.
Named Pipes Provider: Could not open a connection to SQL Server [53].
BUTTONS:
OK

Hi thinkingeye,
Based on my research, this 503 error usually means that the SQL Server computer can't be found or that the TCP port number is either not known, or is not the correct port number, or is blocked by a firewall.
According to your description, it seems that the issue is caused by you cannot ping the IP Address of the source server in the command prompt window of PRODSQL server or the source SQL Server is blocked by the firewall in the PRODSQL server.
For more details about how to fix this issue, please refer to the following blog:
http://social.technet.microsoft.com/wiki/contents/articles/2102.how-to-troubleshoot-connecting-to-the-sql-server-database-engine.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Stay connected plan for staff connect plna

Hi,
i'm very frustrated with my recent customer service experience.
I have recently purchased a phone under telstra staff connect plan. I want to opt for stay connected package like other telstra consumers. I aproached telstra store two times and every time they filled a form for stay connected but nothing happened after that. No email confirmation no notification was received. Finally today i approached customer service via phone and they told me that the request has to be made by manager. Unfotunately my manager is on leave and i don't know what to do. I waited 30 mins over phone to speak tyo stay connected team but to no avail.
Can someone please help me putting stay connected plan? Why do i need to bother my manager if its something which i am insuring at my own expense?
Why staff is not seeing stay connected pack while ordering the phone?
Please please help me i shall be highly thankful
Thank you.

The ability for frontline staff to do much with the connect plans is limited, as they require a special authority only maintained by a couple of teams...
Given that Crowdsupport is mainly a customer-to-customer support method, where most of the contributors are either customers or staff outside of their normal position, you might find the ability to get it sorted limited via CS.
As with Staff discount and certain other things, there is a correct path to arrange it, in the past TSN did have the ability to modify these where TLS did not, otherwise, if you manager is away, do you have a supervisor or another manager whom you are able to talk to during their leave? and I believe it isn't available during the order online, as it is only able to be done instore (or in this case via escalation) in order to meet their requirements legally with product.

Verizon Fios and internet connection issue for ONLY some of my devices

Lost my internet connection last night for about half of my devices (iMac, iPad, Kindle) but the funny thing is that the other devices are able to connect to the internet at the same time.
The Verizon Fios router is MI424WR with dual antennae. I have a Time Capsule hooked up via ethernet to the Verizon router and am using the TC as a wireless access point.
As I am not computer knowledgable, could this happen if there was a firmware update on the Fios router? Could the Fios router allow only certain devices access while denying access to other devices to the internet? It seems that if only one device can access the internet, the system does work but there is a "gatekeeper" that is not allowing access.

No, you use the airport utility not Network Preferences which is your local computer setup.
Setup of the TC you need to select it in the airport utility.. on either a Mac or in a phone or ipad.
When you open it click on the TC and go to the edit tab and check all the details. eg the bridge is here.
Go to the wireless tab to setup wireless.
I recommend a change of wireless name if you do not use names that are short, no spaces and pure alphanumeric. do so.
See how you go without a factory reset but if that doesn't work then a reset is in order.

HT4437 iPad AirPlay connecting issues for apple tv

I have my apple tv plugged into an ethanet cable but the iPad will not connect to the tv via AirPlay. I have tried everything that the troubleshooting have said and nothing works. How do I connect my iPad to AirPlay

Can you run your atv on wifi, without the cable? Try that and see if you get a connection from the pad. if so, that means there is a something going on w the router.
If you cannot get the pad connected wirelessly at all to the atv, then there is some other pad related issue going on.

MaxDB Connection Issue for Content Server

Hi All,
We have installed Content Server 6.40 on Windows 203 server.
We are able to visit the Url http://host:port/ContentServer/ContentServer.dll?serverInfo
But while creatng a repository i am facing issues..its throwing error that
"HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s"
Checked these two notes 698915, 301352 and ru the comman to register MaxDB drivers and got that message that the drivers registered successfulyy.
But still i am not able to create repository uing CSADMIN.
Also ,when tryng to connect to MaxDB using superdba or contro user ,its throwing error "-2 ERR_USRFAIL authorization failed "
Even the control user i amnot able to login.I am giving the password which i gave during installation.
Database is SDB
Pls suggest.
Regards
Ajay

Hello Ajay,
1. I recommend you to create the SAP ticket, if you failed to connect to MaxDB
using superdba or control user with known to you passwords.
2. Could you post the password, which you used during the installation.
In the past the issue was with using passwords more as 9 symbols with Unicode MAXDB.
If you was using, for example, "test123456" password => try to connect to the database
with u201Ctest12345u201D password < first 9 symbols of the password you used during the installation >.
Thank you and best regards, Natalia Khlopina

Latest Maverick update issues for wireless connection

I just did the update and now my wireless network won't connect and my mouse is skipping around some. Anyone having this problem and if so, how do you correct it?

Welcome to Apple Discussions
Wireless issues continue after the (I assume 10.9.2. update).
There are a variety of actions that seem to help for different users... AFAIK no "sure fire" fix. You don't have to try them all at once. Try a few things and see if there's any change.

DB connection issue for Oracle 11g with jdk1.3

Hi Experts,
I have jdk1.3 installed. I need to connect to Oracle 11g, but there is no driver class for Oracle 11g with jdk1.3. I have Classes12.jar for Oracle 9i with jdk1.3. When I try to connect to Oracle 11g with jdk1.3 using Classes12.jar, I get the below error
Error:
java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=185599744)(ERR=12514)(ERROR_STACK=(ERROR=(CODE=12514)(EMFI=4))))
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:335)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:334)....
Please help to solve this issue. This is urgent.
Thanks.

"connection refused" is quite a clear error message;
- either you configure a wrong host name or port number
- the database isn't even running
- a firewall is blocking you
In any case no connection can be made to the database, which is hardly a programming or driver problem. You'll have to figure out for whatever external reason you cannot create a connection to the database. Good luck.

Connectivity Issue for Oracle

Hi,
I am having Oracle 11g (Release 11.2.0.2.0) running on Windows Server 2007 SP2. I am trying to connect to this server from my system using SQL Plus command prompt. (Dedicated - redirect (client and server are on different computers)
I am getting an error: TNS-12518: TNS:listener could not hand off client connection.
When I checked the listener log in the server machine, these were the errors:
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 203: Unknown error
tnsname.ora entry in the client side(my system)
BAM = (DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = md1svcvwm01)(PORT = 1521))
(CONNECT_DATA =
(SID = BAM637_SERVICE)
listenr.ora entry on the server side
(SID_DESC =
(GLOBAL_DBNAME=bamtest10)
(ORACLE_HOME = C:\app\j1013189\product\11.2.0\dbhome_1)
(SID_NAME = BAM637_SERVICE)
From the command prompt, I use sqlplus bamtest10/bamtest10@BAM to connect where in I am getting the errors. Could you please help me in resolving this?
Thanks,

Hi;
Did you review below doc? Also similar issue mention here many times please use search mechanisim
TROUBLESHOOTING GUIDE TNS-12518 TNS listener could not hand off client connection [ID 550859.1]
ORA-12518 / TNS-12518 Troubleshooting [ID 556428.1]
Regard
Helios

IPad 1 internet connection issues for months--connects to modem fine

Similar Messages

Maybe you are looking for