IPad 3 with new ios 6 upgrade...bookmarking problem. Help?!
Maybe you can help me since i am not finding anything concerning my problem. I have an ipad 3. I have also updated it with the new ios 6 upgrade. After this upgrade all bookmarks were lost. But thats not a major issue at the moment. The issue is that I can't seem to add any bookmarks at all. The bookmarks section shows up blank. As if the menus aren't working. Every time I try to add a bookmark, nothing shows up in the list. It won't even let me add anything to the "read later". Any idea whats up?? I have been trying to figure this out since the upgrade. Nothing is being detected.
Thanks in advance for the help.
p.s
Please don't post a link on how to add bookmarks. I know how. It's just after the upgrade recently the bookmarks and **** are not working at all. I have read and searched everything and it's all the generic "help" stuff that does not apply to my problem.
Fyi ... I can add a bookmark and it does not save or show up menu (its always blank). I can do the same for the reading list...and still nothing is the list.
Similar Messages
-
Can anyone advise how to close apps with the new iOS? I have multiple open and cannot close them
Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB. -
UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?
Did you try to connect in recovery mode, explained in this article?
iOS: Unable to update or restore -
Hi,
all trying to update my iPad with new iOS but when in the settings tab there is no software update tab
What I am doing wrong please or i,m going to throw itThe Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes as described half-way down the page that you posted from.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
A first gen iPad will be updated to iOS 5.1.1, and an iPad 2 and 3 to iOS 6.1.3 -
My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.
I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input. -
My garage band will not work properly with new lion upgrade..HELP
My garage band will not work properly with new lion upgrade..HELP
I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
Here is again the short version:
Quit GarageBand, if it is running.
Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
Finder > GO hold down the "Options" key, until the library appears in the menu, select it.
In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
Then try again to run GarageBand and download the loops.
The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
Regards
Léonie -
Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
Does anyone know if Sprint Wireless will be allowing the hotspot on the devices for free instead of having to pay with the new iOS upgrade?
Sprint probably knows. Ask them.
-
i recently updated my iPhone 5 with new ios 6.1 and i realize that my 3g is gone can u plz help me how to turn it back?
im using wifi, but before setting it was like ---> General--->Cellular---->Cellular Data on/off & 3g on/off. but now i cannot find 3g on/off its gone
-
Ever since updating my iPad with the iOS 8 and 8.0.2 it has been much slower in every way. Any suggestions besides restoring to last iOS?
Hi Arianelleangel,
Welcome to the Support Communities! If you are having issues trying to update your Aunt's iPad, the troubleshooting steps below may help:
Resolve issues with an over-the-air iOS update - Apple Support
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
I hope this information helps ....
- Judy -
HT5622 How to keep my previous apps on my ipad with new ones that i purchased recently from iTunes
How to keep my previous apps on my ipad with new ones that i purchased from iTunnes recently? i should note that i create new apple ID for my computer help friends.
Apps and other itunes content are tied to the AppleId used to purchase them. They cannot be transferred.
-
My Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank youMy Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank you -
Is Siri on iPod touch 5g with new iOS 6 update?
Is Siri on iPod touch 5g with new iOS 6 update? If so where can I find it?
Dukeman45 wrote:
Is Siri on iPod touch 5g with new iOS 6 update? If so where can I find it?
Yes. You will find it on the ipod when it is released next month. -
IPod touch texting with new iOS / iTunes account options
My son has an iPod touch and now has texting ability with the new IOS. His iPod is linked to my account, so my name comes up when he texts. Can I create a "sub-account" under mine so his name is the sender, not mine? Or, do I need to make an all new account.?
Any other scenarios to work around without a brand new account?Dukeman45 wrote:
Is Siri on iPod touch 5g with new iOS 6 update? If so where can I find it?
Yes. You will find it on the ipod when it is released next month. -
Please Help! Since I upgrade the ipad with the IOS6 I haven´t been able to sync the ipad with the computer. When I connect the two objects a popup itunes text box appears saying that in order to recognize the ipad I need itunes 10.6.3 or later. But I can´t find that version to download, I just find the latest version of itunes, 10.7, and for that one my computer doesn´t meets the operating system requirements.
If your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
Then you can run the latest iTunes to sync your iPad running iOS 6
You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping.
Maybe you are looking for
-
Loading external Images in MovieClips
Dear All, I am trying to load the external images in Dynamically created Movie Clips. Can you please help me out from this. I am trying something like this: Container_mc.image_mc ( I want to load the Images inside the imag_mc clip) Regards, Sridhar B
-
i own a notebook HP dv6345us and i wold like to install a soundcard in it, so i can plug a logitech z-5500 in it. Then the problems is that im not quite sure of wich of the following SOUND CARDS is the proper one for it: Sound Blaster X-Fi Xtreme Aud
-
[svn] 1536: -fix header
Revision: 1536 Author: [email protected] Date: 2008-05-02 11:34:12 -0700 (Fri, 02 May 2008) Log Message: -fix header -junit check: the method 'suite' must be declared with a junit.framework.Test return type. ant main unit PASSES Modified Paths: blaze
-
MY SERIAL NUMBER WON'T WORK!!!
Last year I purchased an adobe master collection CS6 and so far it has been working fine. In the past month I haven't been able to access the applications as it continually asks for my serial number, however, when I go to type it in, it says it is wr
-
Sniffer_gpu error/crash only when non-admin is logged in
I successfully installed Adobe Master Collection CS4 on our lab machines at school, WIn XP Pro (machine has all MSFT updates). Worked great for ANY local administrator. But when a student, a NON-local admin logs in, he/she gets sniffer_gpu error wh