IPad connects to one camera, not the other

I'm on vacation with two cameras, both are Nikon Coolpix but different models. I want to back up all images on my 3rd gen iPad. When I connect the P510 using its cable and Apple adapter, no problem. But when I connect the S6300, iPad tells me, "Device unavailable. This device requires too much power." Any explanation for the discrepancy and is there a work around? Thanks!

I used the wrong term previously, the message refers to "accessory," not "device." Sorry. Obviously the device is recognized, since the message pops up when connected.
1. Thanks for description of protocols.
2. In the P510 manual, the port is labeled "USB Audio/Video connector," the S6300 manual is not currently available, but the cables supplied with each are interchangeable and appear to be identical. Sorry for my ignorance but the standards you mentioned are meaningless to me.

Similar Messages

HT5622 How do I set icloud on 2 ipads.It recognises one,but not the other one?

How do I set up icloud on 2 ipads? It recognises one but not the other one.

Hi Leora Beisly,
Thanks for visiting Apple Support Communities.
Before setting up iCloud on your devices, I recommend updating to the latest iOS software version. This will ensure that you can use all of the iCloud features on your devices. See this article for information on updating your iPads:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Next, see this page for iCloud setup instructions:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
Before you can use iCloud on each of your devices, you need to sign in to iCloud using your existing Apple ID or a new one, then turn on the iCloud features you want to use.
You may have set up iCloud on your iOS device or Mac when you first used it. To make sure it’s set up correctly, or to set up your iCloud account on another iOS device, computer, or Apple TV, go to the set up iCloud website listed below.
Important: Be sure to use the same Apple ID when you set up iCloud on each device.
Best Regards,
Jeremy

I have 2 iPads, I can only download some apps to one device not the other one?

I have 2 iPads, but can only download some apps to one and not the other?. How can I get the same app on both iPads?
Thanks

1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

Two email accounts, one password for both. will check one but not the other. Have had no problems before

I have 2 email accounts for 2 people. TB will download mail for one but not the other. It can't authenticate the password. Passwords are both the same. Worked fine until today.

The amount of information makes it somewhat hard to give a specific answer. I could only recommend:
* Can you log into the account using the webmail service from your provider?
* Have you verified the settings for the account to be correct (protocol, port number, password encoding)?
The following page gives you a good start with resolving this issue:
https://support.mozilla.org/en-US/products/thunderbird/fix-slowness-crashing-error-messages-and-other-problems/fix-problems-email-providers-gmail-yahoo-etc
Hope this helps!

I have 2 iPod touchs and 1 computer. It will reconize one but not the other. How do I get it to sync music on both

I have 2 older iPod touches and 1 computer. It will reconize one but not the other. How do I sync music on both?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

2 Lenovo ideatab A2107A, front facing camera works on one but not the other

i just purchased two of the same lenovo ideatab A2107A from best buy and i noticed that when trying to take a picture on one i was able to zoom in and change to the front facing camera. The other i can get into the camera, but i cannot zoom in nor can i switch to front facing camera (the icon is not even there). the other camera works well, zoom, video and all, the other i cannot zoom and i cannot switch, any thoughts besides factory resetting?

hi catfish197621,
Welcome to the Lenovo Forums.
You can try to:
1. Download the latest updates Over The Air (OTA) to get the latest patches and bug fixes on the OS (go to settings > about tablet > check for system update).
2. Download a camera app utility like Camera Zoom FX to see if you can zoom in and out and switch to the front facing camera.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

2 Apple TV's; Mirroring to one but not the other

Help me Apple Communities you're my only hope.*
I have 2 Apple TV's on the local network, bothe with Airplay enabled. One labelled AppleTV, the other labelled TV Upstairs.While I can happily stream music and video to both devices from iOS or the MacBook Pro, Mirroring is another matter.
On my iPad 2 when I select Airplay to the Apple TV it comes up with the option for Mirroring. However selecting the TV Upstairs Apple TV does not provide this option, and only sound output only, with quite a delay. The iPad 2 is iOS5, and both Apple TV's are latest stable release. The Time Capsule is upstair with the Upstairs AppleTV.
Any ideas for this?
* guess what I was testing video streaming with.

I think you may be suffering from the same issue as many others in that case.
The situation over the current update seems a little unsure at the present time.
4.4 was released, it was then replaced by 4.4.1, which itself was removed and then made available again, it seems from the number of related post that it may have been removed again.
Some posters are still reporting success by updating via iTunes but I can't confirm that these posts weren't simply referring to other times when the updates were available.
I'd be inclined to sit tight and try again at a later time.

Script works on one site, not the other... why?

Could someone tell me why this prototype-based lightbox seems
to work on one
site but not on the other?
I literally took the exact same .js & css files, copied
them over from one
site to the other, but it's only partially working on the new
site.
http://www.vilverset.com/sample.html
And the original fully-functional one :
http://www.roxanacampagiorni.com/
Been troubleshooting this one for days, and I'm stumped.
Script wants
nothing to do with lightboxing HTML files on the new site.
Only straight
JPGs.

"Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(Mark A. Boyd)
>
>>Strange. I don't think I've ever seen these headers
before:
>>
>>
http://www.vilverset.com/tn_posters.html
>>POST /tn_posters.html HTTP/1.1
>>HTTP/1.x 405 Method Not Allowed
>>Allow: GET, HEAD, POST, PUT, DELETE, CONNECT,
OPTIONS, PATCH, PROPFIND,
>>PROPPATCH, MKCOL, COPY, MOVE, LOCK, UNLOCK
>>
>>I suspect a server configuration - or version.
>
> I consider it a script problem. Why does it send a POST
request instead
> of GET? IMHO the server's response is correct, because
it doesn't make
> much sense to POST something to a static .html page.
That's what I told a helper friend of mine, but he told me
the POST is done
by the server, not the JS files. That's why, according to
him, he couldn't
tell me what code to change in the .js files.
But here they are, if you would be so kind as to tell me WHAT
to replace
with WHAT so the call is made properly. :-)
http://www.vilverset.com/scripts/control.modal.2.2.3.js
http://www.vilverset.com/scripts/effects.js
http://www.vilverset.com/scripts/prototype.js
Those are the 3 files needed for the script.
Should I be banging on Dreamhost's door to fix something, or
not? Because
the exact same 3 files will render an HTML page just fine
over on
roxanacampagiorni.com.
Which is the guilty party? The script, or the server config?

2 identical iPhones-Airprint works one, but not the other?!

My husband and I both have iPhone 4S 32GB. We're using an HP Photosmart 6510 which is both ePrint & Airprint ready. Here's the problem:
I can print via ePrint or Airprint, but my husband's phone will ONLY do ePrint. I don't get it! We have the printer and both iPhones on the same wireless network. He even gets a message that his print job is sending/printing, but nothing prints. I can Airprint the same file from the same e-mail and it works fine. HP is useless...they just keep telling me to reboot the phone and/or reboot the printer. This fixes the problem initially, but a day or two later, the same thing happens. it's very frustrating and I'd really like a permanent fix for this.
Can anyone help?! Please?!
Thank you!!

Thanks for the feedback. It's worth a try. What's making me crazy is why would one phone work and not the other? Rhetorical question, but still making me crazy.

Email sends on one but not the other laptop

I have both a MBP and a MB with the same work email address set up identically on both. Both have been used to send and receive email with no problem until last night. Suddenly I cannot send email on the MB.
Here's details:
I'm using my work email - for here let's call it "[email protected]". This email is set up with it's incoming server as mail.xyz.net and outgoing server as smtp.comcast.net. The selected port is 110.
So I can send and receive all the emails I like on my MBP using the above settings. The MBP is running Mail 5.1. One the MB, when I send any email using the exact same settings, preferences, everything - I get an error message saying the server - smtp.comcast.net has rejected the sender address of "[email protected]"
I checked the "Connection Doctor" in Mail 4.5 and it says "[email protected] is connected and logged in" to the server. But soon as I send an email, BAM, the address is rejected?
I talked with Comcast and they confirm their server is fine, IT IS NOT REJECTING my sender address "[email protected]" and they have no clue what's going on.
Nor do I and before I pay APPLE $50 for support I thought I'd try here.
Any ideas???
Thanks

Try changing the port to 995. I have no idea why that works but it helped when I had the same problem.

Capturing webcam works on one computer, not the other.

Step 1 - I did all the JMF stuff and got the JMStudio working on my laptop that has a built in webcam.
Step 2 - I went into the JMF Registry, pulled out the video capture device (vfw:Microsoft WDM Image Capture (Win32):0) and edited it into the SwingCapture application posted below and got the custom application working flawless.
Step 3 - Everything worked perfect so I loaded all the JMF/Eclipse stuff onto my uncle's laptop and plugged in his Panasonic PV-GS120 handheld video camera that also has webcam drivers.
Step 4 - Got the JMStudio working perfect with this webcam device and all is well.
Step 5 - Copied over my modified application (SwingCapture) and pulled the appropriate capture device (vfw:Microsoft WDM Image Capture (Win32):1) from JMF Registry and edited it into the right spot in the application.
Step 6 - Tried to run the application and got the following error:
java.io.IOException: Could not connect to capture device
java.io.IOException: Could not connect to capture device
javax.media.NoPlayerException: Error instantiating class: com.sun.media.protocol.vfw.DataSource : java.io.IOException: Could not connect to capture device
     at javax.media.Manager.createPlayerForContent(Manager.java:1362)
     at javax.media.Manager.createPlayer(Manager.java:417)
     at javax.media.Manager.createRealizedPlayer(Manager.java:553)
     at SwingCapture1.<init>(SwingCapture1.java:58)
     at Runner.main(Runner.java:17)SwingCapture1 Code:
import com.sun.image.codec.jpeg.JPEGCodec;
import com.sun.image.codec.jpeg.JPEGEncodeParam;
import com.sun.image.codec.jpeg.JPEGImageEncoder;
import javax.media.*;
import javax.media.control.FrameGrabbingControl;
import javax.media.format.VideoFormat;
import javax.media.util.BufferToImage;
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.awt.image.BufferedImage;
import java.io.FileOutputStream;
import java.util.Timer;
import java.util.TimerTask;
public class SwingCapture1 extends Panel implements Runnable, ActionListener
     private static final long serialVersionUID = 1L;
     public static Player player = null;
     public CaptureDeviceInfo di = null;
     public MediaLocator ml = null;
     public JButton capture = null;
     public JLabel frequencyLabel = new JLabel("Frequency:");
     public JTextField frequencyInputField = new JTextField(10);
     public JPanel southPanel = new JPanel();
     public static Buffer buf = null;
     public static Image img = null;
     public VideoFormat vf = null;
     public static BufferToImage btoi = null;
     public static ImagePanel imgpanel = null;
     static int i = 0;
     static String filePrefix = "";
     static String imagesDirectory = "c:\\images\\";
     Thread capThread;
     Toolkit toolkit;
     public SwingCapture1()
          setLayout(new BorderLayout());
//          setSize(640, 480);
          imgpanel = new ImagePanel();
          capture = new JButton("Capture");
          capture.addActionListener(this);
          System.out.println("TEST1");
          final String str = "vfw:Microsoft WDM Image Capture (Win32):1";
          di = CaptureDeviceManager.getDevice(str);
          ml = new MediaLocator(str);
          try
               player = Manager.createRealizedPlayer(ml);
               System.out.println("TEST2");
               player.start();
               Component comp;
               if ((comp = player.getVisualComponent()) != null)
                    add(comp, BorderLayout.LINE_START);
//               add(capture);
               add(imgpanel, BorderLayout.LINE_END);
               add(southPanel, BorderLayout.SOUTH);
               southPanel.add(frequencyLabel);
               southPanel.add(frequencyInputField);
               southPanel.add(capture);
          catch (final Exception e)
               System.out.println("ERROR 1");
               e.printStackTrace();
     public static void playerclose()
          player.close();
          player.deallocate();
     public void actionPerformed(final ActionEvent e)
          final JComponent c = (JComponent) e.getSource();
          if (c == capture)
          { // Grab a frame
               snapPicture();
     public static void snapPicture()
          final FrameGrabbingControl fgc = (FrameGrabbingControl) player.getControl("javax.media.control.FrameGrabbingControl");
          buf = fgc.grabFrame(); // Convert it to an image
          btoi = new BufferToImage((VideoFormat) buf.getFormat());
          img = btoi.createImage(buf); // show the image
          imgpanel.setImage(img); // save image
          // saveJPG(img, "c:\\java\\Tomcat\\webapps\\loadimage\\main.jpg");
          i++;
          saveJPG(img, imagesDirectory + filePrefix + i + ".jpg");
     public static void saveJPG(final Image img, final String s)
          final BufferedImage bi = new BufferedImage(img.getWidth(null), img.getHeight(null), BufferedImage.TYPE_INT_RGB);
          final Graphics2D g2 = bi.createGraphics();
          g2.drawImage(img, null, null);
          FileOutputStream out = null;
          try
               out = new FileOutputStream(s);
          catch (final java.io.FileNotFoundException io)
               System.out.println("ERROR 2");
               System.out.println("File Not Found");
          final JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(out);
          final JPEGEncodeParam param = encoder.getDefaultJPEGEncodeParam(bi);
          param.setQuality(0.5f, false);
          encoder.setJPEGEncodeParam(param);
          try
               encoder.encode(bi);
               out.close();
          catch (final java.io.IOException io)
               System.out.println("ERROR 3");
               System.out.println("IOException");
     public void start()
          if (capThread == null)
               capThread = new Thread(this, "Capture Thread");
               capThread.start();
     public Image getFrameImage()
          // Grab a frame
          final FrameGrabbingControl fgc = (FrameGrabbingControl)
          player.getControl("javax.media.control.FrameGrabbingControl");
          buf = fgc.grabFrame();
          // Convert it to an image
          btoi = new BufferToImage((VideoFormat)buf.getFormat());
          return btoi.createImage(buf);
     public void run()
          try
//               Image img = getFrameImage();
               System.out.println("SNAPPER");
               //do something with the image here
               snapPicture();
               Thread.sleep(1000);
          catch (final InterruptedException iex)
               System.out.println("ERROR 5");
} Edited by: DeX on Mar 21, 2008 3:28 PM

You probably have manually installed JMF on the other system, and you have not placed JMF native system libraries in OS Path.
On Windows place the dll libraries found in JMFHOME\lib\*.dll in Windows System32 dir

JDBC with CLOB abnomally - shows on one server, not the other

Hi have a problem.
I recently moved a web application to another server. I copied over all the same java libraries I had on the first server.
The web application queries an Oracle table - the table contains one CLOB field.
When I query the table on the first server, I can see the contents of the CLOB.
When I query the table with the other server, the query is empty for the CLOB field.
This is the code I use to query the table. I have connection pooling set up within Sun Web Server. If it works on the one server, why would it not work with the other server? This is driving me crazy!!
Any suggestions?
try{
            // Get connection from configured pool
            initContext = new InitialContext();
            source = (DataSource) initContext.lookup("java:comp/env/jdbc/myDB");
            conn = source.getConnection();
            if(conn != null){
                stmt = conn.createStatement();
                result = stmt.executeQuery(sql);
                rsmd = result.getMetaData();
                while(result.next()){
                    Hashtable hash = new Hashtable();
                    for(int i = 1; i <= rsmd.getColumnCount(); i++){
                        if(result.getString(i) != null){
                            hash.put(rsmd.getColumnName(i),result.getString(i));
                        }else{
                            hash.put(rsmd.getColumnName(i),"");
                    returnValue.addElement(hash);
        }catch (Exception e){
            setErrors(e.toString());
            Email.sendMail("[email protected],"subject","Exception: " + e.toString() + "\nWith: " + sql,"fromname");
        }

I tried that with this code:
<body>
          <h1>
               JSP Example
          </h1>
          <%
          Connection dbconn=null;
          ResultSet results=null;
          PreparedStatement sql=null;
          try{
               Class.forName("oracle.jdbc.OracleDriver");
               try{
                    boolean     doneheading = false;
                    dbconn = DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=host.com) (PORT=1521))(CONNECT_DATA=(SERVICE_NAME=theserver.com)))","username", "password");
                    sql = dbconn.prepareStatement("SELECT * FROM BE_STATUS_EMAILS WHERE ID='42575'");
                    results = sql.executeQuery();
                    while(results.next()){
                         if(!doneheading){
                              out.println("<table border=2>");
                              doneheading = true;
                         out.println("<tr><td>" + results.getString("ID"));
                         out.println("<td>" + results.getString("RECEIVED"));
                         out.println("<td>" + results.getString("TYPE1"));
                         out.println("<td>" + results.getString("FROM1"));
                         out.println("<td>" + results.getString("TO1"));
                         out.println("<td>" + results.getString("CC"));
                         out.println("<td>" + results.getString("SUBJECT"));
                         out.println("<td>" + results.getString("MESSAGE"));
                         out.println("<td>" + results.getString("STATUS"));
                    if(doneheading){
                         out.println("</table>");
                    }else{
                         out.println("No results");
               }catch (SQLException s){
                    out.println("SQL Error<br>");
               }finally{
                    if(dbconn!=null)dbconn.close();
          }catch (ClassNotFoundException err){
               out.println("Class loading error");
          %>
     </body>It produced the output, but again, the CLOB field was null. But when I query the database with that SQL using a database query tool, like Aquastudio, I can see the output. And if I run the stub on the other server, it works! This is nuts!!
Any suggestions?

Two elxl ethernet cards - need to hardcode speed/duplex on one but not the other

Hello,
I am running Solaris 8 IA, and have two 3com Ethernet cards. One (elxl1) is a 10Base-T card that is used to connect to my cable modem, and the other (elxl0) is a 100Base-TX card that I use to connect to my internal network.
I had been using a crossover cable to connect elxl0 to my Windows machine (my Solaris box is running ipfilter for firewalling and NAT), and it worked perfectly. I purchased a Linksys switch, and get about 90% packet loss when the two machines are connected to it.
What I'm thinking is that I need to hardcode the speed and duplex settings of elxl0. Of course, I'd prefer to set it to 100/Full, but if I edit elxl.conf, the settings take effect for both cards, and causes elxl1 to not function, since it is not capable of running at 100/Full.
Is there a way to tell the OS that I want to set elxl0 to 100/Full without affecting elxl1?
A response here or via e-mail at [email protected] would be greatly appreciated.

maybe a driver configuration bug? Does modinfo show two instances of the driver??
Does man ndd offer any help?

IPad connects to one camera, not the other

Similar Messages

Maybe you are looking for