Ipad needs multiple bluetooth devices - simultaneously

I have a business need to connect at least two devices simultaneously to the iPad via bluetooth.
Can this be made possible?

Yes. I'm sorry to see that no-one has replied. And it's now April.

Similar Messages

I need to Mirror the same content of iPad on multiple Apple TV simultaneously, can it be done

I need to Mirror the same content of iPad on multiple Apple TV simultaneously.
I have a iPad and three Apple TV in three different rooms, and I would like to play the same video or mirror simultaneously on all the Apple TV located in my three rooms. Is that possible?
I would also like to know is it possible to have two iPad mirrored on to a single apple tv, so that I can view both my iPad screen on same apple TV simultaneously.
Any suggestions?

doubt it most local area networks would die having to stream such amount of data

Multiple Bluetooth devices

i have a Pioneer AVH-P8400BH receiver in my vehicle that has Bluetooth. The microphone pickup isn't great so I use a Bluetooth headset. Both work great individually but not together. Skype always defaults to the Pioneer since its first on my iPhone device list. It's possible to switch by toggling the headset off/on but I'm now losing sound on both devices if I need to toggle twice. I'm doing that if the Pioneer switches back to music.
I've tried disconnecting and calling again but I get the same result. I don't recall if I've closed the app and tried again. I'll give that a try.
Any ideas. This isn't much of a problem on the default iPhone telephone app since I can select the Bluetooth device to use. Better yet would be if iOS allowed me to reorder my Bluetooth devices so I could always default to my headset.

wjosten : Re: MULTIPLE BLUETOOTH DEVICES...?
Aug 22, 2011 3:43 AM (in response to eddieapple)
The name of the device comes from the device itself, thus there is no way to change this on the iPhone.
===============================================
Is this still true even for iOS5.0.1 & iPhone4S?
I just paired it to my 2011 car & the iP4S shows up on the bluetooth devices list as iOS.

Multiple Bluetooth Devices with different functions

Is it possible to run multiple Bluetooth devices at once?
For example, my BMW is currently paired to my phone and the integrated hands-free operates flawlessly. I would like to run a seperate A2DP device to my Aux input to be wire-free, but before I buy it, will I be able to run my BMW hands-free and my A2DP paired at the same time. Will the phone transfer to the BMW when an incoming/outgoing call comes? As far as I know the A2DP device has no microphone, so I don't believe it's meant for taking calls.
Thanks

I second that question for my Audi A4. Have the phone paired with the car via Bluetooth for calling, but don't want to use the Audi AMI cable for playing music, as that fixes the iPhone to the "Accessory enabled" screen ( know I can get around that by jailbreaking) and start Auto Play. I'd like to use the iSkin Cerulean RX Bluetooth dongle instead, and plug that into the Audo AMI cable.
But I'd have to have my iPhone paired to both the car (for phone) and the Cerulean RX (for A2DP audio) simultaneously. Is that possible? Anyone?

Can i use two bluetooth devices simultaneously with iphone 4s? Specifically,a bluetooth headset, as well as a new low energy bluetooth heart monitor?

Can I use two bluetooth devices simultaneously with iphone 4s? Specifically a bluetooth headset as well as a new low-energy smart bluetooth heart monitor?

I don't believe so.

Screen ipad doesn't respond during video viewing home sharing with multiple iOS devices simultaneously

A have a problem with the videos app and iTunes home sharing on multiple iOS devices.
This is my setup. On my iMac 2006 with Snow Leopard I have:
- 100+ dvd's ripped in my iTunes movie section
- 600+ episodes ripped in iTunes TV-section in 35 TV-shows
- 1 apple tv, 1 iPad 2, 1 iPad mini
On an average evening my family is watching different tv-shows simultaneously on the apple tv, the ipad, an iphone, and an ipad mini.
This is done through home sharing on the one iTunes library.
All updated apps, software etc..
What happens on the ipads, after viewing for more than 10 minutes, the user interface doesn't show up when tapping the screen. The touchscreen doesn't respond, only the home button works. Clicking the home button closes the app, but the sound of the video keeps on playing. Opening up the videos app again gives a black screen with sound still playing and still no button or UI.
The only workaround which currently works is killing the videos app. Power off the ipad and power on again, reconnect to the shared library, wait until it has found all the content (1+ minutes) and startup the tv show again.
All in all, a nasty way to pause your viewing or switching to another movie of tv episode, or even wanting to finish viewing.
The problem has haunted me for a year now, patiently waiting and hoping software-updates would fix it. They didn't.
A fix would obviously hugely improve my user experience, getting it on par with Apples usual quality of service.
Anyone familiar with this problem? Apple: is it possible to fix it in an update?

Same here for over a year now.
You cant imagine how happy i am that im not the only one with this problem.
many of frinds have the same setup as me (ipad 2, 27"imac, express, apple tv 2)
No problem
I had the problem on Snow Leopard, lion and now on mountain lion.
I'am also starting to get a new problem - sometimes when waching a movie on iPad or ATV it just quits the movie and you have to start it again
on the iPad most of the time it also shows the wrong cover art. I tried all the hints here, and i works for a day or two then its wrong again
I store my itunes library on an external drive - you ???

Can I connect multiple bluetooth devices, to an IOS device

Hi I have a Logitech Ultrathin keyboard cover, for the new IPad. I'm using the keyboard, all the time my IPad is in use. And sometimes I want to connect my Bluedio R+ bluetooth stereo headset, with bluetooth 4.0 NFC technology. So my question is can I connect both of my external bluetooth devices, at th same time?
Best Regards Alican!

Yes.
Barry

Managing multiple bluetooth devices at home (permanently disconnect some)

Hi. Small apartment. Two rooms. Both have iMacs, and a wireless keyboard and wireless trackpad respectively.
So 2 iMacs, 4 bluetooth devices.
My iMac in my room keeps picking up the bluetooth keyboard and trackpad from the next room.
I keep "disconnect"ing the ones I do not need (by guessing, because their name shows up the same).
But the computer stupidly keeps switching them on again.
How can I permanently tell my iMac to ONLY connect itself to my keyboard and trackpad which are 10 inches from it, and NOT to connect to those that are in the next room?
Thanks!

System Preferences/Bluetooth - hover the cursor over the keyboard/trackpad you want to delete and an x should appear on the right edge.

How do I connect multiple bluetooth devices to macbook pro

Hi,
I would like to connect bluetooth headset(Bose), my Magic mouse together to my macbook pro.
Also, If possible, I would like to use bluetooh headset and wired headset at the same time.
Is it possible, if yes, could some one guide me.
Regards
Sandy

Multiple Bluetooth devices may be connected to your computer at the same time.
Set up differs from device to device. The Bluetooth set up assistant should find new devices when they are turned on and in range of your computer.
Barry

Operating multiple bluetooth devices and "default ...

Hi everyone, I recently i got my self one of these bluetooth bracelets and as i have a stereo bluetooth kit in my car, i started to have problems with these connections.
They won't work together because both of them are recognized as audio devices for the n95. The bad thing is that i can't have the bracelet already paired with the phone in order to pair the bluetooth kit (the bracelet must be manually unpaired, turned-off, etc BEFORE THAT), and vice versa.
What i wanted is not to have to manually unpair anything before a new pairing process, and i thought that toggling an enhancement as default in settings, would do that, but it doesn't, and i don't know what's the use of it then.
Can you please point me a solution, or maybe a 3rd party software that can handle these bluetooth connections in a better way?
Nokia n95-4, fw 20.2.005
Thank you

Unfortunately, Bluetooth for the iPhone only works with phone calls. That's it. It will not let you transfer files to other Bluetooth devices, or stream audio to Bluetooth headphones or speaker systems.

Multiple bluetooth devices(Speakers) attached to Ipad mini

Hi There , I wonder if you can tell me if I can connect multiple ie 2 or 3 seperate bluetooth speakers to my Ipad mini as I have speakers in different rooms in the house and wanted to know if I can connect more than one at a time so I get music through the house , Thanks J

You can connect multiple, but the ipad is limited to playback on a single device.
There are methods to add splitters with additional bluetooth broadcasters to achieve what you want, but it is not an inexpensive option.
Itunes on a computer does offer multiple speaker options.

Multiple Bluetooth devices for ipad

i want both of my kids to watch a movie on my iPad but I can't figure out how to get two Bluetooth headsets to workout the same time

This might seem really old fashioned, but you can buy a headphone splitter and plug two sets of headphones into the splitter, which will permit two sets of headphones to be used at the same time. A headphone splitter is pretty inexpensive too. Here's a link to some options I found.........
http://search.yahoo.com/search;_ylt=Aq0fFwayK5ArxR.jxiouK2WbvZx4?fr=yfp-t-701-s& toggle=1&cop=mss&ei=UTF8&p=headphone%20splitter

Testing of multiple LIN devices simultaneously

Hi,
I require to test a number of LIN devices at once. The application is product validation testing of automotive products. We project that we will be testing at least 4 identical modules at a go. I have found that the NI-8476s usb device is capable of carrying out communication with one device. Is there any way I can multiplex this device? Or will there need to be as many USB devices as there are modules under test?
Thanks in advance for your help!
Regards,
Karl

Hi Karl,
This device can address multiple different Lin devices using a master/slave relationship in a bus type set-up. You won’t need a device for each Lin device because you can address each Lin device in turn suing your USB controller as master. I hope this helps!
Matt
Applications Engineer
National Instruments

Execute commands in multiple Cisco devices simultaneously

Hi all:
We have a big network and every time we need to execute commands in switches and routers, it takes a lot going one by one to do it. Is there any way, ie using special software, or Linux, scripts, whatever that can be used to execute same commands in all devices at the same time?
Thanks in advance
W.

in CiscoWorks LMS there is the RME NetConfig task which can do this for you. You can download an eval copy of LMS here (90 day eval for 100 devices)
http://www.cisco.com/go/nmsevals or
https://cisco.mediuscorp.com/market/networkers/listSubCat.se.work?TRGT=8&/nxt/rcrs/=1126
to get the solaris version
but there is also the the "Cisco Enhanced Device Interface" which perhaps could be a solituon for you:
http://www.cisco.com/en/US/products/ps6456/tsd_products_support_series_home.html
not forget to mention the Kiwi Cat Tools:
http://www.kiwisyslog.com/kiwi-cattools-overview/

Is there no way to make the iPhone 3G support multiple bluetooth devices?

I use a bluetooth headset and my car has bluetooth support. My old phone would automatically connect to whichever device is on and in range. On the iPhone 3G, I have to manually unpair/pair each time I get home or leave home. This is very cumbersome. Is there no way around this and/or will there be a fix update out soon?

Go to the control panel/devices and printers, right click on the printer and then select printing preferences. There should be an option in the printing preferences for Page Order. Just change it to the other setting, click Apply then Ok. Print another document and see if page 1 is now on top.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Ipad needs multiple bluetooth devices - simultaneously

Similar Messages

Maybe you are looking for