IPad one is slow since upgrading to the "Cloud" .

iPad one is slow since upgrading to the "Cloud" photos don't load on blog pages and I get blue questionmark.  How can I force the photos to load?
I also notice a slight delay when my home screen or apps start.  Is it something I can change. I am using the most recient update for the iPad.

If there's an iPad 4, which itself would be interesting since there is not an iPad 3, but  its not on the apple on line store anyway, just the iPad mini. But the chances of getting an 'new' iPad are really good if you want to pay for it. The hardware warranty only covers you for a replacement though.

Similar Messages

  • How can I sync my calendars on the MacBook Pro, iCloud, iPad and iPhone? Since upgrading to the newest OS on each device, none of the calendars sync. Any suggestions?

    How can I sync my calendars on the MacBook Pro, iCloud, iPad and iPhone? Since upgrading to the newest OS on each device, none of the calendars sync. Any suggestions?

    Hi silverk,
    Welcome to the Apple Support Communities!
    I understand the need for all of your calendars to be up to date across all of your devices and how frustrating it can be when they are not syncing as you would expect. In this situation I would suggest reading over and using the attached article for troubleshooting. 
    iCloud: Troubleshooting iCloud Calendar
    Have a great day,
    Joe

  • I can no longer (since upgrading to the latest firefox) open up multiple tabs of the same page (something I need to be able to do when emailing and referencing multiple emails while writing one email). The only option it gives me is to 'switch to tab'.

    Question
    I can no longer (since upgrading to the latest firefox) open up multiple tabs of the same page (something I need to be able to do when emailing and referencing multiple emails while writing one email). The only option it gives me is to 'switch to tab'.

    I'll try to make this clear. I USED to be able to left click on a hyper link and the hyper link would open in a NEW tab. Now for some unknown reason the hyper link by default opens in the same tab (window). I have to right click the hyper link in order for it to open in a NEW tab. (Yes, my 'tools'> 'options'> 'tabs' are set to "open new windows in a new tab." (Please no answers telling me to get rid of the Ask toolbar because I don't have one.) Thank you.

  • How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks

    How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks

    Wiping my phone, restoring from backup, AND wiping all iTunes related files (from a search in Library and in Music) seems to have stopped this behavior.
    (I couldn't wipe the iTunes files on the machine with my media and apps, but I did so on the other machine--where I only sync contacts, calendars and bookmarks. My iTunes library is empty there anyway.)
    I don't know if this relates to an "app synching" issue that iTunes 9.0.1 fixed. Could be.

  • Since upgrading to the newest ios 6.1.26 itunes isn't showing my app list on the left side of the screen, nor does it show all of self made movies, only the purchased ones. Anyone else experiencing a similar problem?

    Since upgrading to the newest ios 6.1.2 itunes isn't showing my app list on the left side of the screen, nor does it show all of my self made movies, only the purchased ones. Anyone else experiencing a similar problem? The iTunes store and most of the other features show up but other normal features seem to be missing too. I wish I hadn't upgraded. Anyone else having this problem???? 

    If you are talking about iTunes on your computer use the iTunes View menu item, "Show Sidebar".
    If not, I have no idea what you are describing.

  • Slow since upgrading to yosemite

    Hello I'm a new mac user and need some info.
    I noticed that my mac is a bit slower since upgrading to Yosemite.
    I get to see many times when opening an app the spinning colourful ball.
    I did an etrecheck since i read on an over discussion that this might help resolving my problem.
    Thank you
    Problem description:
    Slow since upgrading to Yosemite
    EtreCheck version: 2.1.8 (121)
    Report generated March 28, 2015 at 3:10:32 PM GMT+2
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Late 2012) (Technical Specifications)
        iMac - model: iMac13,1
        1 2.7 GHz Intel Core i5 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce GT 640M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:21:45
    Disk Information: ℹ️
        APPLE HDD HTS541010A9E662 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (793.45 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 43
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        uTorrent    UNKNOWN  (missing value)
        Dropbox    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Default Browser: Version: 600 - SDK 10.10
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             1%    WindowServer
             0%    fontd
             0%    com.apple.WebKit.WebContent
             0%    AppleSpell
             0%    dpd
    Top Processes by Memory: ℹ️
        283 MB    com.apple.WebKit.WebContent
        120 MB    mds_stores
        112 MB    Safari
        77 MB    Finder
        60 MB    WindowServer
    Virtual Memory Information: ℹ️
        5.60 GB    Free RAM
        1.71 GB    Active RAM
        477 MB    Inactive RAM
        795 MB    Wired RAM
        1.15 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 28, 2015, 02:48:11 PM    Self test - passed
        Mar 26, 2015, 10:11:19 PM    /Library/Logs/DiagnosticReports/Loader_2015-03-26-221119_[redacted].cpu_resourc e.diag [Click for details]

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

    My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

    First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • My iPad2 (wifi only) is significantly slower since upgrading to iOS 8.0.2. Is Apple addressing this?  Any way to go back to iOS 7?

    My iPad2 (wifi only) is significantly slower since upgrading to iOS 8.0.2. Is Apple addressing this?  Any way to go back to iOS 7?

    I run an iPad 2 on iOS 8.0.2 and have no significant speed issues (FWIW).
    Try resetting the iPad by holding the home and power keys down until the Apple logo appears.
    Any way to go back to iOS 7?
    No. Apple does not support iOS downgrades.
    Barry

  • Why does my iPhoto open and run slow since upgrading to OSX 10.8.5

    Why does my iPhoto open and run slow since upgrading to OSX 10.8.5?  I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.

    Why does my iPhoto open and run slow since upgrading to OSX 10.8.5?  I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.

  • HT204368 I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am no

    I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    Is is important to note that I am not the only one experiencing this issue:
    This is a link to someone using the Motorola H19txt headset experiencing the same issue
    https://forums.motorola.com/posts/94ac15ad7c
    If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
    http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
    Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
    Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
    I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue.  I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web.  Hopefully they are already aware, but if not, maybe they will see i here.

    here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
    There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
    Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

  • HT4623 I have two iPads one has iOS 7.0.4 the other has 5.1.1 have tried to update the 5.1.1 but keep getting message no update available

    I have two iPads one has iOS 7.0.4 the other has 5.1.1 have tried to update the 5.1.1 but keep getting message no update available

    The first generation iPad can not be upgraded beyond 5.1.1

  • Is there a fix for Mail running very slow since upgrade to 10.8

    Mail is running extremely slow since upgrade.  Open New Message window (or auto link to new email from another applicatin), click on outgoing email address field and begin to type.  Takes 15-30 secods per letter in the address to populate the field.  Click SEND and it takes up to 2 minutes to send... another 3 minutes to show up in SENT mailbox.  Sometimes completely chokes and have to Force Quit.  Have already run Disk Utility (Permissions and Directory Corruption Diagnostics and Repair), have Rebuilt the Mailboxes, have reinstalled OS 10.8 from Recovery partition.  IT IS STILL CHOKING, HANGING, AND NOT FUNCTIONING NORMALLY.  Any Ideas ??? Please help!

    I have my 'Check for New Messages' set to 'Manually'.  This is a problem with setting up a New Message to send out.  I did go into settings under Composing Tab and unchecked "Automatically Complete Addresses".  This has resolved the issue of the spinning beachball when attempting to enter an email address into the "To:" field.  So, it is running at normal speed now, but I suspect there s a bug related to that setting... something that is causing a very slow background search through existing address book directory for recognizable email addresses to 'auto fill' in that field.  I have already trashed preferences for both Mail and Address Book and that did not resolve the issue, so it must be something else.  I can live without Auto Complete.  Thanks for the input!

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem

    I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem to be t

    There are only two things that you must do to connect a device to calendars:
    1)  In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
    2)  Turn on calendars on the same page.
    You said that the iphone 4 and ipad **used** to automatically sync.  Do they no long sync?

Maybe you are looking for