Ipad1 with WLAN and 3G but WLAN does not work without SIM Card
I do have that Problem too.
Ipad1 with 3G and WLAN.
But... I do not have a SIM Card. I only use my home WLAN.
I am sure WLAN works and is correct installed (I did the same to my iphone and it works there), AND I can controll my Samsung TV with the Ipad, which only works when both use the same WLAN. So it is installed perfect for sure.
But: when I use safari it shows the URL, but than says there is no connection possible.
Why this?
Do I have to install a SIM Card? How is that? I did not mention to do.
My iOS Software is 5. something (the newest that was possible) since this was a original iPad, never used before.
I installed it with iTunes. iTunes says that the connetction failed BUT all my apps, music and anything else I have from my iPhone are now on the iPad.
Do not understand whats going on.
Again - sure it is on the wlan, but the iPad won´t let my out to connect the world.
Bad since I wanted to use it in the house to read/write emails and for my schedule.
please help soon.
Thanks
A blinking blue dot on a grey screen. In my opinion it doesn't work if that's all you get.
As mentioned in the above thread, there are app store apps (TrackThing, gpsCompass) that will read out your actual position, speed, direction, in numbers, so you can see where you are on a map. (You remember maps? those quaint old world methods of finding where you are?).
This is quite useful in the back country, where cell signals may not reach. I've used gps Compass in the mountains where there was no cell signal. In my case it took about 2 minutes to find the satellites the first time but after that it was very fast.
Its not a substitute for a Garmin, but with a paper map you can still find exactly where you are, and were you are going.
(If you don't know how to navigate with maps, compass, and longitude/latitude numbers, you probably don't belong where there are no cell signals.)
Similar Messages
-
This issue happened randomly. I was working away and the bluetooth just disappeared. The first time this happened, I reset the SMC and it solved the issue. Now, nothing seems to work including removing the bluetooth plist file. Any ideas on how to fix? Thanks.
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account? -
Does gps work without sim card?
hello everyone..
im just having problems with my gps while my sim card is not inserted into my iphone..
even ipod touch's can find locations but my phone cant find me on maps when i dont have my sim card in it..
is this normal?A blinking blue dot on a grey screen. In my opinion it doesn't work if that's all you get.
As mentioned in the above thread, there are app store apps (TrackThing, gpsCompass) that will read out your actual position, speed, direction, in numbers, so you can see where you are on a map. (You remember maps? those quaint old world methods of finding where you are?).
This is quite useful in the back country, where cell signals may not reach. I've used gps Compass in the mountains where there was no cell signal. In my case it took about 2 minutes to find the satellites the first time but after that it was very fast.
Its not a substitute for a Garmin, but with a paper map you can still find exactly where you are, and were you are going.
(If you don't know how to navigate with maps, compass, and longitude/latitude numbers, you probably don't belong where there are no cell signals.) -
OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
Looks like the simple part is using it - just press and hold the digit to dial the whole number.
So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)Seemed like there should be a speed dial, so I did a search & found the cure is worse than the disease -
Dial from your phone
Make calls directly from your existing touch-tone home phone:
Local calls: Dial the 7- or 10-digit phone number.
Long distance calls: Dial 1 + area code + 7-digit phone number.
International calls: Dial 011 + country code + 7-digit phone number.
Dial online from your myAT&T account
Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
Log in to myAT&T. Don't have a myAT&T login? Register today!
From the I want to menu, select Manage my plans and services and then Manage my phone features.
Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
Enter a number to dial or select a number from your Call History or Address Book.
Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
Select Place Call.
When your home phone rings, pick it up to place your call.
Important Note
To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
Dial from your U-verse TV
With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
Tune to Channel 9900 using your U-verse TV remote.
Select a U-verse Voice phone number on screen.
Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
Scroll using the arrows.
Select a number and press OK to return a call.
Select Call and press OK.
When your home phone rings, pick it up to place your call.
You can have a call list accesed from a browser.
You can call back a historical call from the browser or TV.
https://www.att.com/esupport/article.jsp?sid=KB401002 -
I cannot quit Safara. Quit is shaded in the menu.
Under the Apple you will find "Force Quit" select Safari and quit.
-
I am using an A4-Tech X6-90D
THANK YOU! So easy, now I feel stupid. ;)
Sorry, Firefox 4.0 is driving me nuts in many ways, this is just one of them. -
App download/ update does not work without credit card info
Why can't I update or download any apps without entering my card info? There used to be an option that said "none" but it's no longer there.
Hey doublechocolate!
I have some information for you regarding your question that might be relevant:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
Lan and WLan does not work on Satellite L40-18W
Hi all
I have TOSHIBA Satellite L40-18W and my problem 1- wireless not work & wired lan does not work.
I have download driver and every thing is ok but it does not work ( when i search by wireless i do not find any network. My router is working fine)
plzz help meeeeeHi
Its hard to understand what you mean by not working.
What does this mean exactly?
Are you not able to connect to the internet or what?
Usually if the WLan card and the LAN card have been recognized properly in device manager then the drivers are working fine and the issue could be related to wrong router configuration or maybe to some enabled firewalls, etc
Firstly I recommend checking the router settings. Check if the router has been configured with the right data from ISP and if all other common options have been set correctly.
The notebook supports Realtek Wlan and LAN card.
Check if Wlan card uses the same WLan standard like the WLan router and if right encryption has been used too. -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
HT1409 I have done this but it does not work with one of my albums and I dont know why??
I have done this but it does not work with one of my albums and I dont know why??
That would be it. Sometimes you can tweak the album & artist names enough for iTunes to download matching art from the store, or you could add a bonus track featuring 1 second of silence and attach artwork to that, or you could convert the files to Apple Lossless.
tt2 -
I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora -
en
I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]Someone in another section answered this. Thanks.
-
I have set up my iCloud email address on my iPhone and iMac but it does not appear in my iPad? Any suggestions?
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team.. -
Im tying to unlock an Iphone 4.
the celular company make it by its system, and send me an E mail with the instructions to finsh the process by myself, throug itunes.
I did every step, and at the end appers a message telling that my Iphone is unlocked.
but it does not work with other celular company sim card.
It only works with the original sim Card company.
In the Iphone appears a message teeling that has no service with another company's sim CArd.
I don't know what to do.
I've been doing this, with different Sim cards.
sometimes appears a message informing that the SIM card is locked with a PIN. That i must instal the last itunes version and connect it again.
but every Sim card I have are with PIN.
If you can help me I;ll be very glad.
Thank you very Much.
nicanorfrommonChrisj4203, thank you for your kind answer.
I have done a lot of restores to the Iphone, and resets also.
I;ve done holding both buttons as you sugested, but there is no signal appearing.
I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
I don;t knoe what todo.
I have been trying for more than one mont.
I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.
Maybe you are looking for
-
Embedding a *.pdf or *.doc into a Oracle Report
Report Guru's, I am having a scenario wherein a client wants to import a file which could be anything from an image/text/pdf/doc/excel into an Oracle Report output. The file would be stored in the database table column(BLOB or LONG RAW type). As per
-
Bad iBook G4 WiFi reception after hard-drive swap
I just replaced the hard drive in my iBook G4 with a larger one. Everything works fine except that the WiFi only works in close proximity to our Airport Extreme Router. Our other 2 current Macs and our 2 iPhones continue to have good WiFi connections
-
Hi, We are not able to print self invoice for a particular company code thru S_PL0_09000127. It gives the message "list contains no data". When I checked the confguration, the company code has defined number range under Document -> Document Number Ra
-
How to swap two columns of a table. can any body give sample query.
-
hi..im using iphone 5 that have bootloop, already try to restore via itunes but always have error 21, already use other computer and other usb but still have error 21..please help? untill now my iphone 5 still bootloop