Iphone 4 in recovery mode when trying to update to ios and I will not update it because I don't want to lose my information

Iphone 4 in recovery mode when trying to update it to the last version and I will not update it because I don't want to lose my information
my operating system is the before last one

Open iTunes. plug in your iPhone to the usb-port while holding the home button pressed. Your bricked phone should now show up in iTunes.

Similar Messages

  • Iphone in recovery mode, how can i make assure that my data will not erase

    firstly thanks for quick reply.
    sorry sir,
    i am confused in last line you wrote,
    " This will erase the phone but you will be given an option at the end to restore to an existing backup, if you have one."
    i did not understand last sentence - if i have one? you mean to say if i have data or not in my iphone?
    i have many pictures, messages, contacts which are very much important.
    so will it be all restore and will be backup again in my iphone if i restore?
    i am extremely sorry to interrupt you again.
    waiting for your quick reply
    thanks and regards,
    vishal

    sir this reply i received from you -
    " That means that if you did not make a backup BEFORE the phone went into recovery mode, then your data is gone.
    Once the phone is in recovery mode, anything that was on it is already gone."
    My answer -
    sir i have icloud account also, and i login in my icloud account on my laptop in icloud.com and i checked there contacts which i had in my iphone that all are available in icloud website in my account.
    that means i have backup right? but how i can check my other data , means messages and photos?
    please help me to how i can get backup through icloud after restoring my iphone? i will be very glad and helpful by you if you can send me the easy process to take back up from icloud
    please reply soon
    thanks and regards,
    vishal.

  • Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

    iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
    How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
    Please help.

    You don't you must restore your phone first and then you will have the option to restore from your backup.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • IPhone 5 going into recovery mode when trying to update iOS 7

    My 5 went into recovery mode when trying to update to 7.0.2 OTA. At first I was like ok just a glitch. Well trying to update to 7.0.3, it did it again. So right now I am again in the process of restoring and updating my 5.
    What is going on?

    because I'm an idiot.. of course.. All my other over the air updates have worked, I had a good wifi connection, knew I had a backup, and was desperate to get past the initial bugs I've been experiencing..
    I downloaded iTunes on my work PC, enough to get it going again, which I bascially had to do twice.. iTunes didn't find a backup and said that iCloud didn't have a backup, even though it did.. So, it did a basic install of iOS 7..  I then erased all settings from the iPhone itself and when it restarted I chose to restore from iCloud which the phone was able to find..
    Have not seen anything better.. I've had a couple random reboots. Once when swiping the Starbucks notification on the lock screen, the phone immediately crashed back to the apple boot screen.

  • TS3694 I have attempted to update my iphone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    Without knowing what you did and exactly what happened (error messages) all I can suggest is:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

    I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

    Hey there rmflint,
    It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them? 
    App Store at a glance
    http://help.apple.com/iphone/7/#/iph3dfd8c19
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I have a iphone 3gs and it will not update to the IOS 5.1.1

    I have a iphone 3gs and it will not update. I have tried going to settings and it doesnt even show up the software button to check and see if I can update.  I have also tried on itunes to see if i will update and all it says is "the version iphone software (4.2.1) is the current version"
    any ideas to help?

    Post the model number. You probably have an iPhone 3G.

  • I have Mac OS X 10.6.8 and I need to update my iMovie, but it will not let me because I need version 10.7.4 or later. I tried downloading this version but it would not let me because I need 10.7. My question is how do I download this version?

    I have Mac OS X 10.6.8 and I need to update my iMovie, but it will not let me because I need version 10.7.4 or later. I tried downloading this version but it would not let me because I need 10.7. My question is how do I download 10.7 in order to update my iMovie?

    Lion should still be available if you call the online Apple Store. If the Apple Store still has it, they will ask for your Apple ID and credit card number and will then send you a code which you can redeem in the Mac App Store. The Lion installer will download and run automatically. 
    Confirm compatibility with your current applications and Lion before you upgrade; in particular you will not be able to run any appications that were written only for PowerPC Macs.
    Regards.

  • I am unable to open Safari.  It was working yesterday before I installed the update.  The update seemed to be automtic when I restarted my computer.  I am running 10.9.5.  I don't want to lose my contacts, bookmarks etc if I have to delate the app.

    I am unable to open Safari.  It was working yesterday before I installed the update.  The update seemed to be automatic when I restarted my computer.  I am running 10.9.5.  I don't want to lose my contacts, bookmarks etc if I have to delete the app.  Any suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to launch Safari. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.

  • HT5654 I am trying to update my itunes software and it will not update.

    I am trying to update my itunes software and it will not update.

    Hi Oleruss32,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Cheers,
    - Judy

  • I have an iphone 4 and it will not boot. I've done everything except downgrade the firmware to 6.1.3 or 6.1.4... is this what needs to happen and if so can I please get a link to do so? thanks

    I have an iphone 4 and it will not boot. I've done everything except downgrade the firmware to 6.1.3 or 6.1.4... is this what needs to happen and if so can I please get a link to do so? thanks

    Hi JACOBfromINSIDEaLION,
    If you are unable to get your iPhone to restore, you will want to perform a restore from recovery mode, as explained in the following article:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • I want to sync my I phone user name (my current e-mail address) with my iPad, PC user name (old e-mail address.) If I delete that current address in the iPhone, won't I also be deleting it in my other devices? They are synced. I don't want to lose it

    I want to sync my I phone user name (my current e-mail address) with my iPad, PC user name (old e-mail address.) If I delete that current address in the iPhone, won't I also be deleting it in my other devices? They are synced. I don't want to lose it. I just want to get it out of the way on my iphone so it doesn't confuse the transfer of ID names and then I want it back again..      I tried deleting the cloud account, being told the current e-mails would be spared. But all it did was pop up a prompt asking me for the password to my still current email ID. So I assume now that I have to go to mail and get rid of the e-mail account. But I'm scared I'll lose everything in my other devices too.

    You can change the email address you use as your apple ID. this doesn't mean you have to delete the old email address as email.
    When you delete an email from your device, it is only removed from the device, it does not delete your emails or the email account.

  • Just installed Photoshop CC and it will not update

    Just installed CC on a new machine and it will not update, says failed with a 49 at the end of the message, tried restarting and that did not help.  Did get lightroom to install and update without any problems.

    Hi scottbreum,
    Please go through the thread link , http://forums.adobe.com/message/5775939
    In case it does not resolve, please do contact Adobe Support. http://adobe.ly/yxj0t6
    Regards,
    Rajshree

  • TS3274 I have the first iPad and it will not update to IOS 6.  It is also dropping wifi.  Any ideas

    I have the first iPad and it will not update to IOS 6.  It is also dropping wifi.  Any ideas

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • Wily Enterprise Manager Service not Started in Windows 2008 Server

    Hi All, Our Solution Manager is in EHP1 SP21 and OS-Windows 2008 Server. We installed Wily Enterprise Manager 8.0. and found 1 non-fatal error in the installation log. The service is not starting. However it works fine for Windows 2003 Server. Can an

  • Document upload in BW report or web template

    Hi all, Is it possible to upload a document in word, excel etc format in the BW report / WAD ? I am not referring to administrative workbench document. I am on version 3.5. I am under impression it's a standard functionality for netweaver 2000s Bex.

  • Why the time shows "00:00:00"

    Hi, I'm creating timezone convert function to cover that the zone that New_time function won't cover in 8i with the help of JAVA. However, with the code below, the time will be always "00:00:00" when return from Oracle. Do I missing something? Here a

  • XSD file conversion using stylus studio

    Hi All, I have created an Xsd file using stylus studio from XML file .I have given the destination properties as XML Schema file name and TYpe etc. But i am unable to see the structure of the table in the sydicator.can any one let me know  what might

  • Preloader Code Help

    I have a preloader on my website that seems to be very temperamental, sometimes it works and sometimes it doesn't. I have posted the script below, please let me know what I can do to fix the main probelm of the load bar freezing at 0%. onClipEvent (e