Preloader Code Help

I have a preloader on my website that seems to be very
temperamental, sometimes it works and sometimes it doesn't. I have
posted the script below, please let me know what I can do to fix
the main probelm of the load bar freezing at 0%.
onClipEvent (enterFrame) {
loading = _root.getBytesLoaded();
total = _root.getBytesTotal();
percent -= (percent-((loading/total)*100))*.25;
per = int(percent);
percentage = per+"%";
loadBar._width = per;
if (percent>99) {
_parent.gotoAndStop(2);
Thanks

Similar Messages

Need code help to make website work

I am using Flash CS3 (ver 9.0)
Any help with this would be greatly appreciated.
I am creating a flash website and have all of the content in
one file with multiple layers and separate movie clips inside scene
1. I have a movie clip for the home page, a separate movie clip for
about page... and inside each of those movie clips is where my
content is for that page.
I have a separate layer for labels, and a separate layer for
actions. I am having trouble getting the actionscript to work
correctly.
What I want is a preloader (which I already have), then to
have the intro/splash page play through, and at the end of the
intro/splash page I want it to automatically go to the home page
and stay there until the user clicks on one of the buttons to go to
another page.
My labels are "introPage", "homePage", "about"...
My preloader code is: (even though it gives me a warning that
_totalframes is no longer supported)
if (this._framesloaded >= this._totalframes) {
this.gotoAndPlay("introPage");
In the second frame in my actions layer I have the code:
this.gotoAndPlay("introPage");
Actionscript for "introPage" is:
stop();
Actionscript for "homePage" is:
stop();
this.home_btn.onRelease = function() {
this._parent.gotoAndStop("homePage");
this.about_btn.onRelease = function() {
this._parent.gotoAndStop("about");
With the code given above the whole website just blinks
really fast showing the content for only a second and then starts
running through the whole cycle the same way again.
If I remove the above code for the "homePage", except for the
stop(); everything works fine until it's time to enter the home
page which it does not do.
Please let me know what I'm doing wrong with my code. And I
know from reading other posts that it's better to have separate
swfs for each page but I'm not sure how I would link them later if
I did it that way.
Thank you,
ar

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Website preloader code ?

Code help please !
Would anyone be kind enough to share AS3 code for a preloder.
I need my custom made progress wheel in frame 1 to act as a
preloader and navigate to frame 2 when the file fully loads.
Thanks,
Fred...

My website is totally finished but the buttons don't work properly
on frame 1 unless the entire file is loaded. So I wanted to move everything
over a frame and put the custom made "progress wheel" movie clip
I created into frame 1 so it spins until the movie fully loads, then it
should
navigate to frame 2 which would now be the main page with the buttons.
Thank you for taking your time to try and help me.
Fred Hughes...

Survey creation abap code help needed

hello experts,
I need to create a survey in crm, by taking values from end-user from a webpage
A sample code help is needed.
Thanks in advance

Take a look at this SAP note - It does a pretty good job of detailing the steps for you. No coding necessary, it worked out of the box for us after patching this note.
https://service.sap.com/sap/support/notes/638320

Inquiring minds may find this error code helpful: 0x207

Hopefully I'm asking this in the right forum. I just downloaded the update for Microsoft Remote Desktop for Windows Phone 8.1 (I am actually running Denim on a 1520 but that may not matter). The version is 8.1.8.13 released 3/4/2015. I am trying to connect
to a RemoteApp application but I am receiving the following error message shortly after it tries the redirection process (I think it fails at the securing remote connection part after it attemps the redirction to the RemoteApp application collection server):
Connection error
We couldn't connect to the remote PC. This might be due to an expired password. If this keeps happening, ask your admin or tech support for help.
Inquiring minds may find this error code helpful: 0x207
I am able to connect directly to both the broker server as well as the RemoteApp collection server with this application with the same credentials and am only experiencing this when trying to connect to a RemoteApp application.
We are running Server 2012 R2 for both the broker/web and the collection servers. We are not using a gateway server as we use an SSL VPN concentrator instead for access outside of our network. We have server farms set up as well in the RemoteApp topology.
Any info would help or let me know if I'm not posting in the right forum for this issue. I know this is a very recent release so I'm trying to figure out if I should wait for a bug fix or if there's something that I can do on my end.
Thank you in advance for your time!

Hi Scott,
Please check your configuration once again and the certificate must be well configured. Also for accessing RemoteApp there might be the permission issue for your use, recheck once and verify. You can also got through
this article for information.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Redemption code help that you keep sending everyone to is NOT HELPING. It just tells you to put in the redemption code. IF I HAD THE CODE I WOULD HAVE PUT IT IN!! How do I find the code?

Redemption code help that you keep sending everyone to is NOT HELPING. It just tells you to put in the redemption code. IF I HAD THE CODE I WOULD HAVE PUT IT IN!! How do I find the code?

Version 5.5 was/is not part of the Cloud, so you could not have subscribed to that version
You install version 5.5 on a 2nd computer exactly the same way you did the 1st time... put the disc in the drive and enter your serial number when asked
Does your serial number show on your account page?
https://www.adobe.com/account.html for serial numbers on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Code help in writing report Program

Hello experts
I have to write a selection screen program based on the following requirements (only for sales Org:5090, plant:9000, Outbound delivery type= "LF")
Selection parameters:
Material (lips-matnr)
Sold to party(likp-kunag): can hardcode it to 5090
Sales Org(likp-vkorg)
Plant(lips-werks) : hard code it to plant:9000
Sales order(likp-vbeln)
Actual goods movement dates(likp-wadat_ist)
Invoice number
Sales order
Output
material numberlips~matnr ( should Display only S* materials and material type FERT)
Serial number of the device shipped (objk-sernr)
Delivery number (lips~vbeln)
Invoice number (vbrp-vbeln)
Invoice price=Vbrp-vbeln/quantity (invoice price)
Notification number (Viqmel-QMNUm)
KBB Repair Level(VIQMEL-QMTXT from QMCOD )
KBC Repair level(VIQMMA-MNCOD from KBC-SM07 code group(VIQMMA-MNGRP))
code help is higly appreciated,
Thanks
Sp

Hi anurag,
Code is going like this, i could able to display it but when i run it ABAP Dump is coming.
what could be the reason?
Tahnks
SP
*& Report ZSDR_PRICING_KSE_RPT                                        *
REPORT ZSDR_PRICING_KSE_RPT          .
TABLES: likp, lips, vbfa, vbak.
TYPE-POOLS: slis.
*/ Selection and Input Parameters
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-003.
SELECT-OPTIONS: s_matnr FOR lips-matnr,
                s_kunag FOR likp-kunag.
SELECT-OPTIONS: s_vkorg FOR likp-vkorg NO INTERVALS,
                s_werks FOR lips-werks.
SELECT-OPTIONS: s_vbeln FOR likp-vbeln,
                s_waist FOR likp-wadat_ist.
SELECT-OPTIONS: s_vgbel FOR lips-vgbel.
SELECTION-SCREEN END OF BLOCK block2.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
TYPES: BEGIN OF ty_data,
       matnr TYPE lips-matnr,
       sernr TYPE equi-sernr,
       vbeln TYPE lips-vbeln,
       invno TYPE vbfa-vbeln,
       qmnum TYPE vbak-qmnum,
       netwr type vbrp-netwr,
       END OF ty_data.
DATA: gt_data TYPE TABLE OF ty_data WITH HEADER LINE.
TYPES: BEGIN OF ty_lips,
       vbeln TYPE likp-vbeln,
       matnr TYPE lips-matnr,
       wersk TYPE lips-werks,
       vgbel TYPE lips-vgbel,
       END OF ty_lips.
DATA: gt_lips TYPE TABLE OF ty_lips WITH HEADER LINE.
DATA: gt_vbfa TYPE TABLE OF vbfa WITH HEADER LINE.
DATA: gt_vbrp TYPE TABLE OF vbrp WITH HEADER LINE.
TYPES: BEGIN OF ty_ser01,
       lief_nr TYPE ser01-lief_nr,
       obknr TYPE ser01-obknr,
       sernr TYPE objk-obknr,
       END OF ty_ser01.
DATA: gt_ser01 TYPE TABLE OF ty_ser01 WITH HEADER LINE.
START-OF-SELECTION.
PERFORM get_data.
PERFORM display_data.
*& Form get_data
FORM get_data.
SELECT likpvbeln lipsmatnr lipswerks lipsvgbel
         INTO CORRESPONDING FIELDS OF TABLE gt_lips
         FROM likp INNER JOIN lips ON lipsvbeln = likpvbeln
         WHERE lips~matnr IN s_matnr
         AND lips~werks IN s_werks
         AND likp~kunag IN s_kunag
         AND likp~wadat_ist IN s_waist
         AND lips~vgbel IN s_vgbel
         AND likp~vkorg IN s_vkorg.
IF NOT gt_lips[] IS INITIAL.
    SELECT vbeln vbelv INTO CORRESPONDING FIELDS OF TABLE gt_vbfa
    FROM vbfa
    FOR ALL ENTRIES IN gt_lips
      WHERE vbelv = gt_lips-vgbel
      AND vbtyp_n = 'M'.
    IF NOT gt_vbfa[] IS INITIAL.
      SELECT vbeln matnr netwr
      INTO CORRESPONDING FIELDS OF TABLE gt_vbrp
      FROM vbrp FOR ALL ENTRIES IN gt_vbfa
      WHERE vbeln = gt_vbfa-vbeln.
      SELECT ser01lief_nr ser01obknr objk~sernr
      INTO CORRESPONDING FIELDS OF TABLE gt_ser01
      FROM ser01 INNER JOIN objk ON objkobknr = ser01obknr
      FOR ALL entries IN gt_vbfa
      WHERE ser01~lief_nr = gt_vbfa-vbeln
      AND taser EQ 'SER01'.
    ENDIF.
ENDIF.
clear: gt_data[].
LOOP AT gt_lips.
    LOOP AT gt_vbfa WHERE vbelv = gt_lips-vgbel.
      READ TABLE gt_vbrp WITH KEY vbeln = gt_vbfa-vbeln
      matnr = gt_lips-matnr.
      LOOP AT gt_ser01 WHERE lief_nr = gt_vbfa-vbeln.
        gt_data-matnr = gt_lips-matnr.
        gt_data-sernr = gt_ser01-sernr.
        gt_data-vbeln = gt_lips-vbeln.
        gt_data-invno = gt_vbfa-vbeln.
        gt_data-netwr = gt_vbrp-netwr.
        APPEND gt_data.
      ENDLOOP.
    ENDLOOP.
ENDLOOP.
ENDFORM. " get_data
*& Form display_data
FORM display_data.
DATA: lv_repid TYPE sy-repid.
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = lv_repid
I_INTERNAL_TABNAME =
i_structure_name = gt_data
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = gt_fieldcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = lv_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_data
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.

I was messing around with my iPad and put in a in app purchese and forgot the pass code help!

I was messing around with my iPad and put in a in app purchese and forgot the pass code help!

Do you mean you forgot the passcode for your iPad? If so you need to restore it through the recovery mode described in http://support.apple.com/kb/HT1808

Redemption Code Help, where do I locate it?

Redemption Code Help, where do I locate it?

You have activate the subscription only once in the month of August 2014, so you can activate it one more time, if the Cc is asking for serial number then please follow the steps:
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   On Windows XP navigate to following location:
   \windows\system32\drivers\etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
You can refer :
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
Please let us know if it worked.
Regards,
Rajshree

HT201209 When I try to redeem it says error invalid code help me please.

When I try to redeem it says error invalid code help me please.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of issue

I just had to buy a new computer because my "vintage" Mac died. after migrating my backup drive over my Adobe creative suite no longer wroks I get a 150:30 error code HELP!

I just had to buy a new computer because my "vintage" Mac died. After migrating my backup drive over to my New mac book my Adobe CS no longer works. I get a 150:30 error code HELP!

You need to reinstall it properly, not use migration.
Mylenium

Flash Photogallery with preloader PLEASE HELP!!!

Ok...So after searching quite a bit I found a decent flash tutorial to help me make a photogallery. The only problem is that it takes quite sometime to load. I would like to create preloader for this swf file but I can't get anything to work. Here is the code for my gallery....Found at the bottom of the page at this site...
http://www.republicofcode.com/tutori...egallery/4.php
This all works just fine...but no matter what I do I can't seem to get a preloader for this code to work. If I load a simple image in the second frame it works fine, however if I move my flash gallery to second frame it just goes to my gallery after loading...(which takes a while)..no preloader bar or anything! Here is a link to my site... www.nakean.com visit the blank page for the photo gallery...you have to wait a bit for it to load. (15 seconds)..Please Please HELP!

rename your gallery to something other than galleryinprogress.swf, say gallery.swf.
in flash create a new fla named galleryinprogress.fla with the same stage size and background color as your previous galleryinprogress.swf and attached to frame one of your new galleryinprogress.fla add:
var tf:TextField = this.createTextField("tf",1,0,0,100,40);
tf.autoSize = "center";
tf._x = Stage.width/2;
tf._y = Stage.height/2;
this.createEmptyMovieClip("mc",1);
mc.loadMovie("http://homepage.mac.com/nakean/.Public/swf/gallery.swf");
preloadI=setInterval(preloadF,100);
function preloadF(){
tf.text=mc.getBytesLoaded() +" bytes loaded out of "+mc.getBytesTotal()+" bytes total.";
if(mc.getBytesLoaded()>0&&mc.getBytesLoaded()>=mc.getBytesTotal()){
clearInterval(preloadI);
tf.removeTextField();
publish your new galleryinprogress.swf and upload to the same directory as your previous (but now renamed) galleryinprogress.swf.

Preloader code will not start next frame when finished

I have this code in frame 1
"stop();
//Preloader
loaderInfo.addEventListener(ProgressEvent.PROGRESS, updatePreloader);
function updatePreloader(evtObj:ProgressEvent):void
//container for the progress of the site (download)
var percent:Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);
preloader_txt.text = percent+"%";
if (percent==100){
nextFrame();
In frame 2 the animation/flash application starts.
The preloader works fine BUT when it gets to frame 2 it stops. I cannot get it to start. I think it is a simple issue but I cannot see it
Any help would be appreciated..
Thanks
Richard

use:
RickRoo wrote:
I have this code in frame 1
"stop();
//Preloader
loaderInfo.addEventListener(ProgressEvent.PROGRESS, updatePreloader);
function updatePreloader(evtObj:ProgressEvent):void
//container for the progress of the site (download)
var percent:Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);
preloader_txt.text = percent+"%";
if (percent==100){
play();

AS3 preloader - code overload

Is there an easier way to create a custom preloader animation
in AS3? The
only information I can find on the web tends to have about
two pages of code
with stuff like "packages" and "public/private functions"
which I've never
used and unfortunately do not understand. The idea seems
simple to me [(var
ratio = (bytesLoaded/bytesTotal)*100) then have a movie clip
(load_mc) one
hundred frames long displaying 00-99 respectively for each
frame. Then find
some way to call a function that says
[load_mc.gotoAndStop(ratio);]. I've
seen AS2 tutorials on this subject and they all kinda follow
this general
idea. Why then in AS3 do you need two pages of code for an
action that
required 5 or 6 lines of code in a previous version of
ActionScript (AS2)?
No..no...sorry that's not my question. **sighs** I just need
to know if
there is an easier-to-understand method to creating
prealoaders in AS3? I'm
making an intro movie for a new website and the final swiff
will probably be
close to 1 MB so I want to display a simple loading animation
instead of a
blank screen. Any help is greatly appreciated.

Yes, AS3 can look very complex, and many times it is. You
don't need to create packages to use AS3. You can, but you don't
have to. Writing classes in packages allow you to create libraries
of reusable code. You can just write code that will work for you in
a frame script space in a layer of your movie. In many cases, and
for simple movies, this works just fine.
To create a preloader animation, you can use the UILoader and
ProgressBar classes. You can also use the Loader class. Here's an
example that uses the Loader class:

Problem with JTextArea or is it my code, Help!!!

Hi,
I am going crazy. I am sending a message to a JTextArea and I get some very wierd things happening? I really need help because this is driving me crazy. Please see the following code to see my annotations for the problems. Has anyone else experienced problems with this component?
Thanks,
Steve
// THIS IS THE CLASS THAT HANDLES ALL OF THE WORK
public class UpdateDataFields implements ActionListener {     // 400
     JTextArea msg;
     JPanel frameForCardPane;
     CardLayout cardPane;
     TestQuestionPanel fromRadio;
     public UpdateDataFields( JTextArea msgout ) {     // 100
          msg = msgout;
      }      // 100
     public void actionPerformed(ActionEvent evt) {     // 200
          String command = evt.getActionCommand();
          String reset = "Test of reset.";
          try{
               if (command.equals("TestMe")){     // 300
                    msg.append("\nSuccessful");
                    Interface.changeCards();
                    }     // 300
          catch(Exception e){
               e.printStackTrace();
          try{
               if (command.equals("ButtonA")){     // 300
// WHEN I CALL BOTH OF THE FOLLOWING METHODS THE DISPLAY WORKS
// BUT THE CHANGECARDS METHOD DOES NOT WORK. WHEN I COMMENT OUT
// THE CALL TO THE DISPLAYMESSAGE METHOD THEN THE CHANGECARDS WORKS
// FINE. PLEASE THE INTERFACE CLASS NEXT.
                    Interface.changeCards();
                    Interface.displayMessage("test of xyz");
                    }     // 300
          catch(Exception e){
               e.printStackTrace();
     }     // 200
}     // 400
// END OF UPDATEDATAFIELS END END END
public class Interface extends JFrame {     // 300
     static JPanel frameForCardPane;
     static CardLayout cardPane;
     static JTextArea msgout;
     TestQuestionPanel radio;
     Interface () {     // 100
          super("This is a JFrame");
        setSize(800, 400); // width, height
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          // set-up card layout
          cardPane = new CardLayout();
          frameForCardPane = new JPanel();     // for CardLayout
          frameForCardPane.setLayout(cardPane);     // set the layout to cardPane = CardLayout
          TestQuestionPanel cardOne = new TestQuestionPanel("ABC", "DEF", msgout, radio);
          TestQuestionPanel cardTwo = new TestQuestionPanel("GHI", "JKL", msgout, radio);
          frameForCardPane.add(cardOne, "first");
          frameForCardPane.add(cardTwo, "second");
          // end set-up card layout
          // set-up main pane
          // declare components
          msgout = new JTextArea( 8, 40 );
          ButtonPanel commandButtons = new ButtonPanel(msgout);
          JPanel pane = new JPanel();
          pane.setLayout(new GridLayout(2, 4, 5, 15));             pane.setBorder(BorderFactory.createEmptyBorder(30, 20, 10, 30));
          pane.add(frameForCardPane);
             pane.add( new JScrollPane(msgout));
             pane.add(commandButtons);
          msgout.append("Successful");
          setContentPane(pane);
          setVisible(true);
     }     // 100
// HERE ARE THE METHODS THAT SHOULD HANDLE THE UPDATING
     static void changeCards() {     // 200
               cardPane.next(frameForCardPane);
               System.out.println("Calling methods works!");
     }     // 200
     static void displayMessage(String test) {     // 200
               String reset = "Test of reset.";
               String passMessage = test;
               cardPane.next(frameForCardPane);
               System.out.println("Calling methods works!");
               msgout.append("\n"+ test);
     }     // 200
}     // 300

Hi,
I instantiate it in this class. Does that change your opinion or the advice you gave me? Please help!
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class CardLayoutQuestionsv2 {
    public static void main(String[] arguments) {
        JFrame frame = new Interface();
        frame.show();
}

Preloader Code Help

Similar Messages

Maybe you are looking for