IPhone 5 restore boot loop, need help!?

okay so here is the deal.
I am travelling at the moment so my iphone is VERY important, yesterday i attempted to update my phone from 6.0.1 to 6.0.2. i plugged in my iphone 5 to my macbook pro and let it download and update.
sadly it failed and now my iphone 5 is stuck in a recovery loop! as i am currently in the moutains there is no phone repair shops around that i can take it too so i need to figure out how to get it out of this recovery loop!
currently all i have is the connect to itunes logo on my phone.
i have tried connecting it and restoring the settings but it fails and i get error code (-1), (1600) or (11) normally it is (-1)
i tried removing the sim card and reinstalling the software but no luck.
ive been googling this for the past 5 hours and have got nowhere!
ive attempted programs like tinyumbrella and Recboot but neither works.
i am really stuck and need help ASAP!!

Somebody please help!
ive spent over 10 hours trying to fix this and being in the canadian mountians i have no other help
need some advice please!!

Similar Messages

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.

Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

Iphone4 upgrade ios5.0.1, done upgrade and reboot itself, iphone stuck at sos mode. need help!!

iphone4 upgrade ios5.0.1, done upgrade and reboot itself, iphone stuck at sos mode. need help!!

By "sos mode" do you mean recovery mode? If so, you have to connect it to iTunes and restore it.

IPhone 4 in boot loop on activation screen after restore and update.

I recently restored my iPhone because it was playing up but after the restore, it's stuck in a boot loop. The phone boots, comes onto the 'Slide to Activate' screen but if i wait 10 seconds or slide it, it boots again.
Any help would be appriciated.
JFleety17

JFleety17 wrote:
Yes it was jailbroken.
Buzz! Thank you for playing!
Enjoy your iBrick.
Now you know why Apple recommends against making unauthorized modifications to the phone.
You can't get help here.

I restored my iphone and updated it but the progress didn't complete and now my iphone is not working. i need help asap.

my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou

it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.

My IPhone 4 has been jail broken and I can't restore it I need help

I Need Help Restoring My Jailbroken iPhone 4

More on jailbreaking:
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-ja ilbreaking
Note that my links to other pages may take you to my organization's page and should not be taken as an endorsement from Apple.

Iphone 4 won't restore backup! NEED HELP ASAP!

Ok so I got an iphone 4 last week on at&t and today decided to switch to verizon. I did so and they switched my contacts and pictures for me. great. So I got home and connected to my macbook pro and I clicked restore from backup or whatever and it was the wrong thing. So it restored from my oldd ipod touch so I lost all contacts and pics. When I click iTunes>preferences>devices I see the backup from the other phone that I need but I need to know how to get that onto my iphone I have now. Please Help!

You won't be able to. Here's why:
Since both your phones are new, they likely had the newest iOS version installed. For AT&T it's 4.3.3; for Verizon it's 4.2.8.
Since the Verizon phone has a LOWER firmware number than AT&T phone, you cannot restore a Verizon phone (older firmware) from an AT&T (newer firmware) backup. You could, however, restore an AT&T phone from a Verizon backup since the AT&T phone has the same, or more recent firmware update.
No way around this. If you search this forum, you'll see many similar posts.
If you used your phone as intended, you shouldn't lose much data at all, other than perhaps some application data. Photos are stored on your computer in iPhoto (unless you didn't do as recommended and upload photos taken by the iPhone into iPhoto), contacts should be synched with Address Book so they should be on your computer. Your iTunes media (videos, music, podcasts, apps) should still be in iTunes ready to be synched onto your new phone.

Iphone 5 in boot loop and isn't being recognized by my computer.

Hey, I'm having a serious problem with my Iphone 5 right now. A few days ago my Iphone began having problems. I clicked on an app then i received multi colored vertical lines across my screen then i experienced the boot loop. Every time i turn on my Iphone it is stuck in the boot loop with the apple logo fading out every 3-5 seconds then it will flash with a white horizontal line across the top quickly and the boot loop will restart itself. I tried connecting my Iphone to my computer but it isn't being recognized. Also i tried various other computers but yet none of them recognized the phone. Also, previously i had some minor problems with the battery it would sometimes die with about 15-20 percent battery still left maybe this may contribute to this continuous boot loop i am not sure. Can anyone please help me i just got this phone not too long ago. Thank you in advanced

also i have tried a hard restore but i still experience the flashing apple logo after i attempt it

My iPhone won't boot up anymore, help?

Hi, I'm Lee! My iPhone will not boot up, and I don't know what did it. My friend said his iPod won't come on because he charged it on a friend's XBOX overnight, and so did I. I really don't know if the XBOX did it, but it's possible. The other day I turned it off to save power, and when I tried to turn it on, it wouldn't completely boot up. The Apple logo shows up for about a minute and then the loading symbol comes up and just keeps going and it won't ever get to the lock screen. I've tried to restore it. It won't show up in iTunes so I heard about putting the device in Recovery Mode to make it recognizable. It made it show up, but every time I tried to restore it gave me error codes like 21, 1600, 1601, 1602, 1603, and 1604. My iPhone was on 5.0.1 and at the Restore page in iTunes that only had options to Update and Restore. Update was grayed out, and there should be an update to 5.1. Then today when I tried restoring it the message at the top was stuck on "Verifying iPhone restore with Apple..." iTunes isn't frozen on "Verifying iPhone restore with Apple," it just won't say anything else. I've tried everything and nothing works. I've even tried holding the Power and Home buttons forever, and still, nothing works. Please help!!
Message was edited by: ulyssesfromalabaster

I've read all the error codes already. I've downloaded 5.1 again and tried to restore and it's stuck on "Verifying iPhone restore with Apple" again. After about 10 minutes, iTunes doesn't recognize my iPhone anymore and the tab with my iPhone goes away but it still says "Verifying iPhone restore with Apple" at the top. I'm going to try reinstall iTunes. This should fix things.

Ipod touch (2G) stuck in "restore" mode. Need HELP please

I have contacted Apple support several times since Friday and was just hung up on by an extremely rude lady in customer support. I am really frustrated and just trying to get my 5 yr old little boys ipod touch working again.
The situation is that our son's old computer crashed. So we have a newer computer set up for him. Reinstalled itunes on it. Called Apple on Friday, really nice rep gave me several instructions for transfering purchases, making sure everything was up to date and turning home sharing on. Did all that, got off the phone with him and then the computer tells me that the ipod needs and update.
Clicked ok, and update starts going for a few minutes.....then get an error message that says that the ipod is basically stuck in "restore" mode and needs to be reset to factory settings. It won't let me do anything to the ipod. It won't restore, reset, anything. Just shows a picture of usb cable and says to connect to itunes.
Connect to itunes and it keeps giving me say error message.
Will someone please help me? Apple support sure won't.

Did you try to connect in recovery mode, to start the restore process again? Connecting in Recovery mode is explained here: http://support.apple.com/kb/HT1808
Also delete the ipod ipsw firmware file on your computer, to make iTunes download a new copy to restore from. Depending on your OS, this file can be found here:
XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
Vista and 7: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
If you're getting error numbers, take a look at this article: http://support.apple.com/kb/TS1275

HT5622 iPhone 5 has been stolen.need help

someone stolen my iPhone 5 3days ago.a lot of personal information there.. So I use my iPad get on fine my iPhone location,. But today my app password has changed,that means there is no iPhone 5location anymore ,I can't find it,I need help.i was bought in Ny last year ..my imei is 013434000448957.i was trying to call the police,but they have no idea how to help me..so the china iPhone numb 4006272273also does.pls help me..

Actually I did this already..but it doesn't work.so I brought a software on Internet ,,the phone has been restart with a unknown ID card .. I told the police already bcs they can accord to this if research the new user phone number, but what I fear is the police is too busy to work my case out or they just don't want for this little case.
<Email Edited by Host>

T60 wont boot ~ I NEED HELP ~

H'ok.. So I was going to try to fix my friends T60 but I'm worried this is kinda over my head..
She came to me and said the OS was currupt and asked me to install a new os onto her laptop..
I was only able to install anything when the built in Wireless card was disabled..
Whenever you enable the wireless card, windows wont boot (all versions) nor will Windows installer boot..
Linux will boot though with the wireless card enabled.. but wont see a wireless network.
I've checked the hard drive and the ram.. both are ok.
I tried swapping the wireless card, but that didn't fix the problem..
Could it be the motherboard?
I need help! PLEASE WILL SOMEONE HELP!
~Jonny B

Could you try doing a system update using an ethernet cable? What OS are you using?
ThinkVantage System Update here:
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-66956
Here is the link for the ThinkVantage Productivity Center download:
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-61378
Think link lists all of the available ThinkVantage Technology Tools for your T61:
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-61432#productivity
Let us know if that helps.
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

Error restoring row currency - Need Help

Hi All,
Can anyone explain me how can I control the row currency???????
this is my situation:
when I navigate from page1 (with one read-only table - tableEmployees) to page2 (with a read-only table - tableSelectEmployees, with this columns: ps, eps, obs, obs2, where ps, eps and obs are the primary keys), selecting the "create" button, I need to insert a new row in tableSelectEmployees (page2) with this values (ps=2, eps=2, obs=null, obs2=null). -----> Until here everything works Fine :)
The Big problem is when I need to navigate from page2 to page3 (with a read-only table - tableAddEmployees with this columns: DOM_ID, id, meaning, where Id is the primary key). The tableAddEmployees has a Query like this:
SELECT *
FROM tableAddEmployees
WHERE NVL(tableAddEmployees.DOM_ID,0) = NVL(:1, 0)
AND tableAddEmployees.ID NOT IN (
SELECT obs
FROM tableSelectEmployees
WHERE Ps= :2
AND Eps = :3
AND NVL(obs, 0) = NVL(:4, 0))
When I select the new row created (Ps=2, Eps=2, null, null) in page 2 and go to page3 I get this error messages from the log window:
12:17:20 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
12:17:20 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2PopUpObstaculos.do
12:17:20 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
12:17:20 DEBUG (JhsActionServlet) -Parameter searchText:
12:17:20 DEBUG (JhsActionServlet) -Parameter event_Rollback:
12:17:20 DEBUG (JhsActionServlet) -Parameter event:
12:17:20 DEBUG (JhsActionServlet) -Parameter partial:
12:17:20 DEBUG (JhsActionServlet) -Parameter source:
12:17:20 DEBUG (JhsActionServlet) -Parameter eventValue:
12:17:20 DEBUG (JhsActionServlet) -Parameter rowKeyStr:
12:17:20 DEBUG (JhsActionServlet) -Parameter partialTargets:
12:17:20 DEBUG (JhsDataAction) -Executing action /S2PopUpObstaculos
12:17:20 DEBUG (JhsDataAction) -lastIssuedPageTimeStamp set to: 1156245440919
12:17:20 DEBUG (JhsDataAction) -Found existing searchBean for S2AltaSociais2UIModel
12:17:20 DEBUG (JhsDataAction) -Stored searchBean for S2AltaSociais2UIModel on request
12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 0 has changed: old value=0 ,new value=
12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 1 has changed: old value=0 ,new value=2
12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 2 has changed: old value=0 ,new value=2
12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 3 has changed: old value=0 ,new value=
12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: executing query, bind parameter values have changed
12:17:20 DEBUG (JhsDataAction) -executing onRollback
12:17:20 DEBUG (JhsDataAction) -executing Rollback ActionBinding
12:17:21 DEBUG (JhsDataAction) -Restoring row currencies
12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosAssoc1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosAssoc1Iterator.
12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
12:17:21 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 0 has changed: old value= ,new value=278263
12:17:21 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 3 has changed: old value= ,new value=278263
12:17:21 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: executing query, bind parameter values have changed
12:17:21 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
12:17:21 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2PopUpObstaculos.uix
--->If I want this null values why is JDeveloper changing the row currency?
When I select one row from page2 with values like this (2, 2, 278264, null) I get the correct response:
12:19:41 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
12:19:41 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2PopUpObstaculos.do
12:19:41 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
12:19:41 DEBUG (JhsActionServlet) -Parameter searchText:
12:19:41 DEBUG (JhsActionServlet) -Parameter event_Rollback:
12:19:41 DEBUG (JhsActionServlet) -Parameter event:
12:19:41 DEBUG (JhsActionServlet) -Parameter partial:
12:19:41 DEBUG (JhsActionServlet) -Parameter source:
12:19:41 DEBUG (JhsActionServlet) -Parameter eventValue:
12:19:41 DEBUG (JhsActionServlet) -Parameter rowKeyStr:
12:19:41 DEBUG (JhsActionServlet) -Parameter partialTargets:
12:19:41 DEBUG (JhsDataAction) -Executing action /S2PopUpObstaculos
12:19:41 DEBUG (JhsDataAction) -lastIssuedPageTimeStamp set to: 1156245581741
12:19:41 DEBUG (JhsDataAction) -Found existing searchBean for S2AltaSociais2UIModel
12:19:41 DEBUG (JhsDataAction) -Stored searchBean for S2AltaSociais2UIModel on request
12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 0 has changed: old value=0 ,new value=278264
12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 1 has changed: old value=0 ,new value=2
12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 2 has changed: old value=0 ,new value=2
12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 3 has changed: old value=0 ,new value=278264
12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: executing query, bind parameter values have changed
12:19:41 DEBUG (JhsDataAction) -executing onRollback
12:19:41 DEBUG (JhsDataAction) -executing Rollback ActionBinding
12:19:41 DEBUG (JhsDataAction) -Restoring row currencies
12:19:42 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: bind parameter values have not changed
12:19:42 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
12:19:42 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2PopUpObstaculos.uix
Can anyone help me with this problem, please?
What can I do to solve this currency problem?
Please, I really need help on this!!!
I'm using JDeveloper10.1.2, struts, uix pages.
Thanks,
Atena

Can anyone give some help here?

IPod touch 2G boot loop? Help please

I am having a major problem with my iPod touch 2G. It seems to be in some sort of boot loop. No, I do not abuse it in any was and it has never been jailbroken. When this happened I was just listening to some music and then the screen went black. When I plug it in it does this: http://www.youtube.com/watch?v=xE_5-_Lnmvk&feature=plcp. I have tried for 2 hours to put it into DFU mode but that did not work. I hope this is enough information. I will be checking back here every hour at first then at least once a day later on. Thanks!

Try the remaining actions of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

MOVED: Gaming 5 v1.5/i5 4690k Boot Loop Please Help!

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=184764.0

Update*SOLVED*
Last night I gave it another go, this time I plugged all sata devices back in and went into the bios (bios sees the SSD but still will not boot to it). frustrated I went ahead and put the OS on the HDD and it went to desktop (the same way I reached the desktop with the SSD) and it works fine.
What I did notice is that my SSD was not recognized by windows when the OS was installed to the HDD instead.. It can see it in the bios, and I can set it as 1st boot priority, but I only got the boot loop. Even though if I renstall the OS to the SSD I can get to the desktop fine, after rebooting it would loop again ( like the os was never installed)
Its turned out to be as simple as my SSD having some compatability issue.
no problems with psu
no problems with cpu
no problems with ram
These few things had me worried. Anywho, I hope this can help someone else with the same symtopms. Cheers!
Thanks Nichrome for the advice, I did check my pins when I saw this, and I had a psu on standby just in case.

IPhone 5 restore boot loop, need help!?

Similar Messages

Maybe you are looking for