IPhone 6 Plus-Restart and display image is super large

Amongst all of the many problems I've been having with my new iPhone 6 Plus, one of the most annoying is when I restart my phone, the screen is super sized.
After exhaustive trying, I found that double tapping with 3 fingers shrinks the screen back to normal.
Why is it that every time I restart my phone, the screen is huge?
And on a side note... When I shut my phone down (not restart), when I tried to turn it back on, the screen went weird. Like I'd just smacked it and it was destroyed.
But then I held in the Home and Side button to restart it, and everything was fine.... Except for the overly large display.
Thanks for any help.

Hi Event Video Guy,
Thanks for visiting Apple Support Communities.
It sounds like you've had some unexpected behavior with your iPhone 6 Plus. I know that can be annoying, especially with a new device.
With the zoom situation you describe, it sounds like the Accessibility Zoom feature has been enabled.
You can turn zoom off at Settings > General > Accessibility > Zoom.
From:
iOS: Home screen icons are magnified or large
I'm glad that restarting your iPhone resolved the weird screen display. If you do see that symptom again, you can use the steps in this article to isolate and resolve the behavior:
iPhone: Hardware troubleshooting
Best Regards,
Jeremy

Similar Messages

A complaint or iPhone 6 PLUS user and I want my CAMERAS HAVE SOME DIFFICULTY

A complaint or iPhone 6 PLUS user and I want my CAMERAS HAVE SOME DIFFICULTY

If you are having problems using your camera, check this troubleshooting article:
Camera isn't working or has undesired image quality
If you are willing to give us more details about your issue, we could probably help more.

Upload and display image in webside

Hello Friends,
I am developing an auction web site ,and facing some problem so I need your help.
There is some confusion about uploading and displaying images in website .In web based
application if I want to upload images than where have to store the images database or server
side any folder .I have not idea about that please send your ideas and sussesions.
Second problem is What is the best way to display images in webside either giving a direct
path of server side image folder or I need to retrieve all images from database .
I have no idea about it please send me your guideline which are usefull for me to implement in my
website.
what is the correct way to upload and display images in website ?
Thanks . Have a nice day.

If you are using a Container you just leave your image files in the home directory of your web application. And forget this idea about database. It´s not necessary in this case.
To display the images just use HTML, <img src="url">.

How to decode a set of datas received from serial port and display image on a canvas based on CVI ?

Hi !
I have received a set of datas via rs232 and it contains picture messages. I have to decode the datas first and then display them on a canvas.
I have known several functions that may be used . Such as
int SetBitmapData (int bitmapID, int bytesPerRow, int pixelDepth, int colorTable[], unsigned char bits[], unsigned char mask[]);
int CanvasDrawBitmap (int panelHandle, int controlID, int bitmapID, Rect sourceRectangle, Rect destinationRectangle);
However,I don't know how to set the following parameters according to the actual pixel values and color values.
int bytesPerRow, int pixelDepth, int colorTable[], unsigned char bits[], unsigned char mask[]
What's more,I have no idea how to decode the datas.
The attachment is a incomplete project. I will be very appreciated if anyone could help me .
Best regards.
xiepei
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.
Attachments:
Decode and display image.zip ‏212 KB

Well, things are getting a bit clearer now.
1. Your image is actually 240x240 pixel (not 320x240 as you told before). The size of image data is 57600 bytes which corresponds to that frmat (I was puzzled by such a data size compared with larger image dimensions!)
2. The image is a 8-bits-per-pixel one; this means that you must provide a color palette to create the bitmap
3. You cannot simply copy image data into bitmap fields in CVI: CreateBitmap always produce an image with pixeldepth matched with display colour depth (normally 24 or 32 bpp)
All that means that you must:
1. Create the appropriate color palette with 256 colors: it may be a grayscale or color palette depending on camera characteristics. Grayscale palette can be found in my sample project, while sample colour palettes can be found here (here the description of a "standard" 8-bpp color palette)
2. Create the bits array correctly dimensioned for the color depth of your monitor
3. Get each pixel value from the camera, lookup in the color palette for the appropriate colour and create the RGB informations into the bits array in memory
4. Display the bitmap on the canvas
As a first step, I would configure my system for 256-color display setting, create a bitmap and simply copy image data into it: you should be able to get the correct image back to your screen.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16

Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone.

Iphone 5 keeps restarting and turns off under 20% bat no fix from apple after iOS 7

Iphone 5 keeps restarting and turns off under 20% bat no fix from apple after iOS 7.
People keep having this problem as I keep seeing and also seeing apple doing nothing to help there consumers.
Anyone one know how to fix this problem because apple don't!
Come on apple! A fix!!!!!

I am having the same issues. I feel that I have to carry around a charger because it either dies so fast, or turns off when it's not completely dead or restarts.

My health app on my iPhone 6 plus is not displaying any info

How do I get the health app on my iPhone 6 plus to start back displaying the information? It stopped displaying the steps, walking+running & flights climbed a couple days ago. I have turned my phone off & on several times & still nothing. The phone is calculating my steps because my "myfitnesspal" app is picking up my steps from my iPhone.

Next step would be setting it up as new device and restoring from the latest backup:
How to erase your iOS device and then set it up as a new device or restore it from backups
The health data should be included in the iCloud backup, or in your encrypted backup made by iTunes:
Use Health on your iPhone or iPod touch with iOS 8 - Apple Support

Open and display image in MVC layout

Hello!
I cant figure out how I shall do this in an MVC layout:
The program request user to open an image file that are then displayed in a JLabel
My setup at the moment resolve in a nullpointerexeption because it dont get any actual image file, but I dont understand what I have missed.
I can not post the whole code fo you to run because it is to big, so I post the part that are the most important. please have a look.
PicturePanel
//Import Java library
import javax.swing.*;
import java.awt.*;
public class PicturePanel extends JPanel {
     //Variables
     private ImageIcon picture;
     //Method to get information of the selected file
     PicturePanel (String fileName) {
          picture = new ImageIcon (fileName); //Get the filename
          int w = picture.getIconWidth(); //Get the image with
          int h = picture.getIconHeight(); //Get the image height
          //Set preferable size for the image (Use the properties for the selected image)
          setPreferredSize(new Dimension(w, h));
          setMinimumSize(new Dimension(w, h));
          setMaximumSize(new Dimension(w, h));
     //Method to draw the selected image
     protected void paintComponent(Graphics g) {
          super.paintComponent(g); //We invoke super in order to: Paint the background, do custom painting.
          g.drawImage(picture.getImage(), 0, 0, this); //Draw the image at its natural state
}From my model:
//Local attributes
     boolean check = false; //Used to see if a statement is true or not
     PicturePanel pp;
     JFileChooser fc;
     int returnVal;
//newFile in File menu
     public void newFile() {
          //Open a file dialog in users home catalog
          fc = new JFileChooser();
          //In response to a button click:
          returnVal = fc.showOpenDialog(pp);
          System.out.println("You pressed new in file menu");
     }From my controler:
//User press "New" in File menu
          else if (user_action.equals("New")) {
               //Call method in model class
               model.newFile();
               //Update changes
               if (model.returnVal == JFileChooser.APPROVE_OPTION) {
                    System.out.println("Hello1");
                    File f = model.fc.getSelectedFile();
                    if (model.pp != null)
                         model.pp = new PicturePanel(f.getAbsolutePath());
                    System.out.println("Hello2");
                    //Display image (Here is line 83)
                    view.setImage_DisplayArea(model.pp);
                    System.out.println("Hello3");
          }From my view:
//Sets the image to be displayed on the image_display area (Here is line 302)
     public void setImage_DisplayArea(PicturePanel pp) {
          image_display.add(pp);
     }The complet error:
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
     at java.awt.Container.addImpl(Container.java:1015)You pressed new in file menu
Hello1
Hello2
     at java.awt.Container.add(Container.java:351)
     at View_Inlupp2.setImage_DisplayArea(View_Inlupp2.java:302)
     at Control_Inlupp2.actionPerformed(Control_Inlupp2.java:83)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:334)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1050)
     at apple.laf.CUIAquaMenuItem.doClick(CUIAquaMenuItem.java:119)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1091)
     at java.awt.Component.processMouseEvent(Component.java:5602)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3129)
     at java.awt.Component.processEvent(Component.java:5367)
     at java.awt.Container.processEvent(Container.java:2010)
     at java.awt.Component.dispatchEventImpl(Component.java:4068)
     at java.awt.Container.dispatchEventImpl(Container.java:2068)
     at java.awt.Component.dispatchEvent(Component.java:3903)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
     at java.awt.Container.dispatchEventImpl(Container.java:2054)
     at java.awt.Window.dispatchEventImpl(Window.java:1801)
     at java.awt.Component.dispatchEvent(Component.java:3903)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)Edited by: onslow77 on Dec 16, 2009 5:00 PM
Edited by: onslow77 on Dec 16, 2009 5:04 PM

Hello again!
Anyone that can help me figure out how to implement this in an MVC layout, I feel stuck.
I post a little program that open and display an image file so that you better can understand what I whant to do.
ShowImage
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.File;
import javax.swing.filechooser.*;
public class ShowImage extends JFrame{
     //Variables
     JFileChooser fc = new JFileChooser();
     PicturePanel pp = null;
     ShowImage () {
          super("Show"); //Title
          //Create the GUI
          JPanel top = new JPanel();
          add(top, BorderLayout.NORTH);
          JButton openBtn = new JButton("Open");
          top.add(openBtn);
          openBtn.addActionListener(new Listner());
          //Settings for the GUI
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          pack();
          setVisible(true);
     class Listner implements ActionListener {
          public void actionPerformed(ActionEvent ave) {
               int answer = fc.showOpenDialog(ShowImage.this);
               if (answer == JFileChooser.APPROVE_OPTION){
                    File f = fc.getSelectedFile();
                    //Check
                    System.out.println(f);
                    System.out.println(pp);
                    if (pp != null)
                         remove(pp); //Clean so that we can open another image
                    //Check
                    System.out.println(pp);
                    //Set the PicturePanel
                    pp = new PicturePanel(f.getAbsolutePath());
                    //Check
                    System.out.println(pp);
                    //Add PicturePanel to frame
                    add(pp, BorderLayout.CENTER);
                    validate();
                    pack();
                    repaint();
     //Main
     public static void main(String[] args) {
          new ShowImage();
}PicturePanel
//Import Java library
import javax.swing.*;
import java.awt.*;
public class PicturePanel extends JPanel {
     //Variables
     private ImageIcon picture;
     //Method to get information of the selected file
     PicturePanel (String fileName) {
          picture = new ImageIcon (fileName); //Get the filename
          int w = picture.getIconWidth(); //Get the image with
          int h = picture.getIconHeight(); //Get the image height
          //Set preferable size for the image (Use the properties for the selected image)
          setPreferredSize(new Dimension(w, h));
          setMinimumSize(new Dimension(w, h));
          setMaximumSize(new Dimension(w, h));
     //Method to draw the selected image
     protected void paintComponent(Graphics g) {
          super.paintComponent(g); //We invoke super in order to: Paint the background, do custom painting.
          g.drawImage(picture.getImage(), 0, 0, this); //Draw the image at its natural state
}//The endEdited by: onslow77 on Dec 16, 2009 7:30 PM

Efficiency of decoding and displaying image files?

BRIEF SUMMARY
My question is this: can Flash Player download JPG and GIF
files from a server and rapidly open/decode them, ready for
display, efficiently and
entirely 'in memory'?
Would Flex be a good choice of language for developing a RIA
that needs to continually download lots of JPG and GIF images
on-the-fly from the server and render them on the screen? I *don't*
want my application to thrash the hard disc.
BACKGROUND
I am designing a 'rich' web app, and I'm investigating
whether Flex is the right tool for the job.
Although Flash's animation features are an obvious selling
point for implementing my user interface, I also need to do some
server-side rendering. What I want to do is perhaps a little
unorthodox: I will be generating lots of GIF and JPG files on the
fly and these will be streamed to the client (along with other
application data, e.g. in XML format) to update different parts of
the on-screen document. In need this to happen very quickly (in
some cases, creating the effect of animation).
It happens that JPGs and 16-colour GIFs will be, by far, the
most efficient formats for streaming the images, because of the
nature of the application. I could of course send the images in
some proprietary format, geared for my application, but presumably
decoding the images would be slow as I would have to implement this
myself in ActionScript, and so I would be limited by the speed of
Flex 'bytecode'. (I realise Flash is a lot more optimised than it
once was, but I am hoping to see a gain from using image formats
that Flash natively understands!)
Naturally the internet bandwidth should (in principle) be the
bottleneck. However, assuming I can get my image files to the
client on time, want I want to know is:
how efficient is Flash at loading such files?
Bearing in mind that I'm not just displaying the occasional
image -- I will be doing this continuously. Most of the images
won't be huge, but there will be several separate images per
second.
The image files will be a mixture of normal colour JPGs and
4-bit colour GIFs (LZW-compressed). I know that Flash natively
supports these formats, but depending on how Adobe have implemented
their LZW/Huffman decoding and so on, and how much overhead there
is in opening/processing downloaded image files before they are
ready to 'blit' to the screen, I imagine this could be pretty fast
or pretty slow!
If my client only has a modest PC, I don't want the JPG/GIF
decoding alone to be thrashing his CPU (or indeed the disc) before
I've even got started on 'Flashy' vector stuff.
I'm new to Flash, so are there any 'gotchas' I need to know
about?
E.g. Would it be fair to assume Flash Player will do the
decoding of the downloaded image entirely 'in memory' without
trying to do anything clever like caching the file to disc, or
calling any libraries which might slow down the whole process? It
would be no good at all if the images were first written to the
client's hard disc before being ready to display, for example.
Further, if I'm doing something a little out-of-the-ordinary,
and there is no 'guarantee' that images will be loaded quickly,
what I'm doing might be a bad idea if a later version of Flash
Player may (for example) suddenly start doing some disc access in
the process of opening a newly downloaded image. So, while I could
just 'try it and see', what I really need is some assurance that
what I'm doing is sensible and is likely to carry on working in
future.
Finally, I imagine JPG/GIF decoding could be something that
would vary from platform to platform (e.g. for the sake of
argument, Flash Player for Windows could use a highly-optimised
library, but other versions could be very inefficient).
This could be the 'make or break' of my application, so all
advice is welcome! :) Thanks in advance.

You need a servlet/jsf component to render the image in the response.
Look at this: http://www.irian.at/myfaces-sandbox/graphicImageDynamic.jsf

IPhone 5 Springboard restarts and resets

For the last two weeks I have been experiencing major "springboard" reboots and resets randomly on my iPhone 5 with iOS 6.1.2. My experiences:
- phone restarts springboard 3 times in the time of a 10 minute phone call. Doesn't drop call. I just go dark on the line and then come back when the lock screen reappears.
- phone restarts randomly every 2-3 minutes while sitting idle but plugged into the apple provided charger and cable.
- phone restarts randomly during typing of text or email. Typed text is gone after springboard restarts. Always gone after reset, as one would expect.
What I have done...
On my own....
Hard reset of phone.
Restore from scratch and setup as a brand new iPhone reloading everything from the App Store and setting up mail accounts from settings.
Genius Bar...
Genius Bar trip 1 included an hour wait to be told to restore from scratch again. This included a firmware update by the "Genius" before I was sent on my way. Left with my iPhone being as if I had just unboxed it. I restored from scratch again. Not from a backup. Long process and frustrating.
Problem started back up almost immediately. Walked back into Genius Bar. Was told to let all the mail and contacts get downloaded returning the phone back to a normal use state and if the problem happens again, come back. Well..... It did.
Genius Bar trip 2. They replaced the iPhone with a brand new phone. I restored from scratch again.... Not from backup. It seemed ok for a bit then the problem started again. I had all the rash logs on my phone vs. sending automagically to Apple. Left on business trip.
Arrived in Houston on trip and immediately went to Genius Bar. Phone restarted or reset 4 times during the appt. showed Genius the crash logs. He replaced the phone again. That was Monday night. It seemed ok only restating a few times on Tuesday. Wednesday set new records for restarts.
I have no idea what to do. I can't take calls on the phone reliably at this point. Not to mention use the "Smart" phone features the phone garnered its market share from. I love Apple. I have all their stuff, but this is getting to be unacceptable. I need help. Badly.

Hi BigDave,
Did you ever find a solution to this issue, or did it go away?
I upgraded to the iPhone 5s from 4s and am running the latest OS. I have the springboard reboot randomly in the same way you describe. This also extends to my iPad Air. It seems most commonly resetting during heavy or just use ie switching between apps while on a call or FT Call, listening it music etc.
Please let me know your thoughts.
Thanks, Gary

How to upload and display image using bsp application

hi
I just wants to know that
1- how to upload image from BSP page with attachment into sap server .?
2-how to display image in to BSP page(webpage).
thanks

Hello Gupta Prashant,
Just to upload and display an image, import image in MIME repository. Not only still images but also flash files can also be uploaded in the MIME repository. Once you import the image in it, use normal html code for image call;
<img src = "file.jpg/gif" width= height=>
Besides it, if your requirement is to store the image in the database and fetch it based on specified field-name, then you have to go for BLOBs i.e Binary Large Object, using this you can also store images, videos, pdfs, applications in the database.
MBLOB - Medium BLOBs store videos and pdfs,
LBLOB - Large BLOBs store movie files and applications.
You have got 2 ways to use it; some databases store BLOB objects into themselves and some store the path of the BLOB object maintained on the FTP server.
You can also implement it in ABAP;
read the following link and practice the tutorial;
[ Use of MIME Types|http://help.sap.com/saphelp_45b/helpdata/en/f1/b4a6c4df3911d18e080000e8a48612/content.htm]
also check this
[TYPES - LOB HANDLE|http://help.sap.com/abapdocu/en/ABAPTYPES_LOB_HANDLE.htm]
And looking at your question, in order to upload an image, you can make use of FILEUPLOAD tag provided by HTMLB.
Step 1: FILEUPLOAD provides a browse button to choose desired image file.
Step 2: Store that image in database using BLOBs.
Step 3: Retrieve the image using normal select query and display it on the screen.
Hope it helps you,
Zahack

File name and displaying images

I am trying to rename all the jpg files i have in my directory, to consecutive number. eg. 1.jpg, 2.jpg. as a new comer to the java world, im not too sure if i have doen it right. could you check...
Also, after i renamed the files i want the images displayed side by side across the screen..
This is teh code...
import java.awt.*;
import java.applet.Applet;
import javax.swing.*;
import java.io.*;
import java.io.File;
import java.io.IOException;
public class GetImages extends Applet {
 public static void main(String[] args) throws IOException
// File (or directory) with old name
 File file = new File("picture1.jpg");
 // File (or directory) with new name
 File file2 = new File("1.jpg");
 // Rename file (or directory)
 int xx;
 xx = 0;
 if (xx<500) {
 file.renameTo(new File(xx+".jpg"));
 xx++;
private Image image;
public void init() {
 image = getImage(getDocumentBase(), (xx+".jpg"));
public void paint(Graphics g) {
 int x, y, counter, numberOfImages;
x = 0;
y = 0;
counter = 1;
numberOfImages = 21;
while (counter != numberOfImages) {
 g.drawImage(image, x, y, 15, 15,this);
 x = x + 15;
 counter++; im not too sure where i am goign wrong?

You're really trying to do two things: rename the files and display the images. Let's work on one at a time. First, to rename the files, you'll need to get a list of the files in the directory. Look at the Javadocs for java.io.File (http://java.sun.com/j2se/1.5.0/docs/api/java/io/File.html) for the way to do this.
Once you have the list of files, you need to loop through them and rename each one. A for loop will be a good way to do this. You'll have an array of Files, so your code might look something like this:
// Get your array of Files and call it something simple like 'files'
int numFiles = files.length;
for( int x = 0; x < numFiles; x++ )
// Rename the file
}The for loop will start at 0 and loop until x is equal to numFiles.

Store and Display Image from Database

Now that MySQL is working (woo hoo!) with JSC, I have a couple of questions for any experts out there...
1. How would I perform an image or other file upload from a browser?
2. How would I retrieve and display an image from a db on a jsp page?
Thanks for any help.

Craig, I think I have a simpler way to load an image on the page, although for the time being I'm not retrieving from a database, but from the file system. The problem is that I'm not getting the pages to load continuously with new images. At some point it apears that the session gets clogges and can not load new pictures. I'll try to include the page bean code just below. This time I'm not adding the "code" tags because I haven't being successful with that. If you have problems , please, contact me at [email protected].
The core of the code is in a couple of button_action methods.
If you need, I can give access to the http server where this is running.
Luiz
package untitled;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import javax.faces.component.html.*;
import com.sun.jsfcl.std.*;
import javax.faces.component.*;
import javax.swing.filechooser.*;
import javax.swing.*;
import java.io.*;
* Creator-managed class.
* Your code should be placed at the end.
public class Page1 extends AbstractPageBean {
private HtmlForm form1 = new HtmlForm();
private FileSystemView filesystem = FileSystemView.getFileSystemView();
private File path = new File("C:/Documents and Settings/Luiz Costa/My Documents/Creator/Projects/PictureAlbum/build/images/Isadora\'s Wedding");
private File[] fileslist = filesystem.getFiles(path, false);
private int counter = 1;
private int iw = 0;
private int ih = 0;
private Integer aiw = new Integer("1");
private float aar = 0;
private float ar = 0;
private ImageIcon ii = null;
public HtmlForm getForm1() {
return form1;
public void setForm1(HtmlForm hf) {
this.form1 = hf;
private HtmlGraphicImage image1 = new HtmlGraphicImage();
public HtmlGraphicImage getImage1() {
return image1;
public void setImage1(HtmlGraphicImage hgi) {
this.image1 = hgi;
private HtmlCommandButton button1 = new HtmlCommandButton();
public HtmlCommandButton getButton1() {
return button1;
public void setButton1(HtmlCommandButton hcb) {
this.button1 = hcb;
private HtmlCommandButton button2 = new HtmlCommandButton();
public HtmlCommandButton getButton2() {
return button2;
public void setButton2(HtmlCommandButton hcb) {
this.button2 = hcb;
private HtmlGraphicImage image2 = new HtmlGraphicImage();
public HtmlGraphicImage getImage2() {
return image2;
public void setImage2(HtmlGraphicImage hgi) {
this.image2 = hgi;
private HtmlOutputText outputText1 = new HtmlOutputText();
public HtmlOutputText getOutputText1() {
return outputText1;
public void setOutputText1(HtmlOutputText hot) {
this.outputText1 = hot;
* This constructor contains Creator-managed initialization code.
* Your initialization code can be placed at the end,
* but, this code will be invoked only the first time the page is rendered,
* and any properties set in the .jsp file will override settings here.
public Page1() {
// Creator-managed initialization code
try {
catch ( Exception e) {
log("Page1 Initialization Failure", e);
throw new FacesException(e);
// User provided initialization code
public String button1_action() {
// Add your event code here...
outputText1.setValue(fileslist[counter].getAbsoluteFile().getPath()+fileslist.length+"left"+counter);
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image1.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image1.setHeight(""+(int)aar);
outputText1.setValue(image1.getHeight());
image1.setUrl("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image2.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image2.setHeight(""+(int)aar);
outputText1.setValue(image2.getHeight());
image2.setUrl("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
counter = (counter-1+fileslist.length) % fileslist.length;
return null;
public String button2_action() {
// Add your event code here...
outputText1.setValue(fileslist[counter].getAbsoluteFile().getPath()+fileslist.length+"right"+counter);
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image1.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image1.setHeight(""+(int)aar);
outputText1.setValue(image1.getHeight());
image1.setUrl("images/Isadora\'s Wedding/"+fileslist[counter].getName());
ii = new ImageIcon("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
ar = (float)ii.getIconHeight()/(float)ii.getIconWidth();
// aiw = new Integer(image2.getWidth());
aiw = new Integer(ii.getIconHeight());
aar = ar*aiw.intValue();
image2.setHeight(""+(int)aar);
outputText1.setValue(image2.getHeight());
image2.setUrl("images/Isadora\'s Wedding/"+fileslist[(counter + 1 + fileslist.length) % fileslist.length].getName());
counter = (counter+1+fileslist.length) % fileslist.length;
return null;
}

Loading And Displaying image From MYSQL

Hello, How can I load and display picture stored into a MYSQL database in a Swing GUI using for example JLable component.

establish a connection to ur sql, n
retireve the record with the images or image url in the db.
and then load it to a Image icon and set it to a JLabel.

Insert and display images in a report

Hi ABAPers, I need to insert and display an image (bitmap format) in a standard ABAP report. With the consideration that the image (an employee photograph) could vary depending on the employee numer the user enter as an input parameter for the report. Any ideas of how can I do it? Help will be appreciated. Thanks in advance.
Regards.
Sebastian.

No you cant do it as Vashmi already said so , you can upload the pictures in ALV, but in your requirement I must say you should see the OSS note # 353949
FYI
Symptom
In the following note you will find some of the most frequently asked questions and their answers. Most answers are release independent, but some are valid for release 4.6 only.
Other terms
Questions, picture in header, profile, FAQ
Solution
[1] Question: Is it possible to configure the profile e.g. for a person?
[2] Question: How can I bring a picture of the person into the profile header?
[1] Question: Is it possible to configure the profile e.g. for a person?
Answer: It is possible to add or delete sub-profiles. You can do this in the customizing (transaction OOPF). There you can deactivate sub-profiles for an object type. Or add a new existing sub-profile.
[2] Question: How can I bring a picture of the person into the profile header?
Answer:
You should have an employees picture with format JPG or BMP...
Start transaction OAAD to add the picture to SAP ArchiveLink. Press the Create-Button there. You have to type in PREL for the Business object and HRICOLFOTO for the Document type. Then press create. On the popup you must maintain the wished Personnel number for that the picture should be valid. Then press 'Continue'. Choose the picture and continue.
For the screen header 00 (if it isn't changed) you should see the picture in the profile.
Hope thisll give you idea!!
P.S award the points.
Good luck
Thanks
Saquib Khan
"Knowledge comes but wisdom lingers!!"

IPhone 6 Plus-Restart and display image is super large

Similar Messages

Maybe you are looking for