IPhone simulator Error: Domain=DTiPhoneSimulatorErrorDomain Code=1

I create a new project from Cocoa Touch Application template.
I meet the following error sometimes(not every time).
5/5/08 3:21:14 PM Xcode[122] Error launching simulated application: Error Domain=DTiPhoneSimulatorErrorDomain Code=1 UserInfo=0x36de1c0 "Unknown error."
Anyone has any clue?

OK, with version 4.4, see my reply here: I've been using Lightoom 4.4 now for a while and i've always been able to load straight to Flickr. I clicked "authorize" over and over, yet the website doesn't open up where i click to authorize it. not sure where to go from here

Similar Messages

Upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn't be completed. Input/out

upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/out. Any thoughts on what is causing these errors and the upgrade failure?
Thanks

I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

Installation error Install Failed: Error Domain=PKInstallErrorDomain Code=112

Trying to install an application or "whatever", from a mounted dmg image installer gives this error:
Install Failed: Error Domain=PKInstallErrorDomain Code=112.
A developer I contacted suggested a workaround by disabling/enabling checkmark of "Ignore ownership on this volume".
Is there anyone knowing the reason for this issue and final solution?
PS I already have verified/repaired permissions on boot disk.

Steps to do
1) /etc/hosts now reads:
127.0.0.1 localhost
192.168.56.101 demo.us.oracle.com oracle-pc
2) updated java in path /usr/java from 1.5 to the latest version (1.6.0_27) by rpm-deinstalling the old version first and
then rpm-installing the new version.
3) Don't do a simple install.
Instead u installed WebLogic Server 10.3.5 first, than do the Repository creation with RCU, followed by the BI Server software only install
and finally the BI Server configuration.
Marks as correct if helpful or let me know the updates?

Error Domain...

Hello - try to purchase in iTunes - follwoing error message comes up :
Error Domain=SKErrorDomain Code=0 "Verbindung mit iTunes Store nicht möglich" User Info=0x16558be0 {NSLocalizedDescription=Verbindung mit iTunes Store nicht möglich}
what can I do??

it might be in the "LostAndFoundConfig" container in the Configuration partition.
Something like this should be logged:
Event Type: Warning
Event Source: NTDS General
Event Category: Directory Access
Event ID: 1723
Date: 6/4/2005
Time: 7:39:52 AM
User: NTDEV\A1ADCH
Computer: NTDEV-DC-07
Description:
Active Directory failed to raise the functional level of the domain or forest
because the following domain controller is at a lower functional level.
Object (forest or domain):
DC=ntdev,dc=corp,DC=microsoft,DC=com
NTDS Settings object of domain controller:
CN=NTDS Settings,CN=LostAndFoundConfig,CN=Configuration,DC=ntdev,DC=corp,DC=com
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Delete the 'NTDSA' object from the "LostAndFoundConfig" container using ADSIEdit.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Error in iTouch, but OK in iPhone simulator

I got the following error:
Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIWebDocumentView anchorPoint]: unrecognized selector sent to instance 0x839a00'
the code runs ok in iphone simulator, but in my iTouch 3G (8GB, upgrade to iOS 4), it show the above error, here is the stack:
0 CoreFoundation 0x36440303 __exceptionPreprocess + 114
1 libobjc.A.dylib 0x3523d4c4 objcexceptionthrow + 40
2 CoreFoundation 0x36443e0f -[NSObject(NSObject) doesNotRecognizeSelector:] + 98
3 CoreFoundation 0x364432ab __forwarding__ + 506
4 CoreFoundation 0x364433a8 _forwarding_prep_1__ + 56
5 QuartzCore 0x30c88c0c -[CALayer setFrame:] + 196
6 UIKit 0x324312a0 -[UITextView commonInitWithWebDocumentView:isDecoding:] + 1280
7 UIKit 0x324f405c -[UITextView initWithFrame:] + 104

You may have better luck using the proper forums, etc.:
https://devforums.apple.com/community/iphone

Interface Builder encountered an error communicating with the iPhone Simulator

Hi,
I downloaded the latest iOS SDK and tried simple helloworld program. Once I try to build it in the xcode, it shows the following 2 errors. I tried to re-install the SDK several times, and it doesn't work.
CompileXIB MainWindow.xib
cd /Users/qingzhao/Desktop/ch1/HelloWorld
setenv IBCMINIMUM_COMPATIBILITYVERSION 3.2
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr /bin:/usr/bin:/bin:/usr/sbin:/sbin"
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/qingzhao/Desktop/ch1/HelloWorld/build/Debug-iphonesimulator/HelloWorld.a pp/MainWindow.nib /Users/qingzhao/Desktop/ch1/HelloWorld/MainWindow.xib --sdk /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk
2010-09-22 13:07:18.333 ibtool[1155:607] Assertion Failure: [toolTask isRunning]
2010-09-22 13:07:18.337 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.337 ibtool[1155:607] Line: 140
2010-09-22 13:07:18.519 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b7dcc IBAttachToCocoaTouchTool + 1669
1 IBCocoaTouchPlugin 0x00000001039b5e9f IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 147
2 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
3 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
4 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
5 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
6 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
7 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
8 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
9 ibtool 0x000000010000829f
10 ibtool 0x0000000100006e0c
11 ibtool 0x0000000100003161
12 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.519 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
2010-09-22 13:07:18.520 ibtool[1155:607] Assertion Failure: NO
2010-09-22 13:07:18.520 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.520 ibtool[1155:607] Line: 351
2010-09-22 13:07:18.521 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b5f62 IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 342
1 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
2 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
3 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
4 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
5 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
6 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
7 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
8 ibtool 0x000000010000829f
9 ibtool 0x0000000100006e0c
10 ibtool 0x0000000100003161
11 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.521 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
What can I do ? Thank you very much!!!

I found this on stack overflow.com and thought it would apply to this article discussion for some users even though I don't understand how to revert the version (through git?)
I think this is a compatibility issue. I think the .xib has moved to Xcode 4 (as shown by the line setenv IBC_MINIMUM_COMPATIBILITY_VERSION 4.2) which Xcode 3.2's version of ibtooldoes not understand.
I think you need to revert to a version of the .xib prior to the update to Xcode 4.""

Interface Builder encountered an error communicating with the iPhone Simula

Hi,
I downloaded the latest iOS SDK and tried simple helloworld program. Once I try to build it in the xcode, it shows the following 2 errors. I tried to re-install the SDK several times, and it doesn't work.
CompileXIB MainWindow.xib
cd /Users/qingzhao/Desktop/ch1/HelloWorld
setenv IBCMINIMUM_COMPATIBILITYVERSION 3.2
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr /bin:/usr/bin:/bin:/usr/sbin:/sbin"
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/qingzhao/Desktop/ch1/HelloWorld/build/Debug-iphonesimulator/HelloWorld.a pp/MainWindow.nib /Users/qingzhao/Desktop/ch1/HelloWorld/MainWindow.xib --sdk /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk
2010-09-22 13:07:18.333 ibtool[1155:607] Assertion Failure: [toolTask isRunning]
2010-09-22 13:07:18.337 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.337 ibtool[1155:607] Line: 140
2010-09-22 13:07:18.519 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b7dcc IBAttachToCocoaTouchTool + 1669
1 IBCocoaTouchPlugin 0x00000001039b5e9f IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 147
2 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
3 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
4 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
5 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
6 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
7 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
8 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
9 ibtool 0x000000010000829f
10 ibtool 0x0000000100006e0c
11 ibtool 0x0000000100003161
12 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.519 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
2010-09-22 13:07:18.520 ibtool[1155:607] Assertion Failure: NO
2010-09-22 13:07:18.520 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.520 ibtool[1155:607] Line: 351
2010-09-22 13:07:18.521 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b5f62 IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 342
1 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
2 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
3 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
4 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
5 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
6 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
7 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
8 ibtool 0x000000010000829f
9 ibtool 0x0000000100006e0c
10 ibtool 0x0000000100003161
11 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.521 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception infonull)
/* com.apple.ibtool.errors */
/Users/qingzhao/Desktop/ch1/HelloWorld/MainWindow.xib: error: ibtool failed with exception: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception infonull)

I'm using 10.6.4 and having the same issue. Reinstalled the newest SDK a few times (Xcode 3.2.4 with 4.1 of the iOS SDK). I can't build anything to run on the iPhone Simulator, but building regular Mac apps works fine. Here's what it tells me when I try to build and run:
CompileXIB MainWindow.xib
cd /Users/myusername/Development/iTennis
setenv IBCMINIMUM_COMPATIBILITYVERSION 3.2
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr /bin:/usr/bin:/bin:/usr/sbin:/sbin"
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/myusername/Development/iTennis/build/Debug-iphonesimulator/iTennis.app/M ainWindow.nib /Users/myusername/Development/iTennis/MainWindow.xib --sdk /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk
2010-10-26 17:07:21.838 ibtool[1428:607] Assertion Failure: [toolTask isRunning]
2010-10-26 17:07:21.934 ibtool[1428:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-10-26 17:07:21.934 ibtool[1428:607] Line: 140
2010-10-26 17:07:22.016 ibtool[1428:607] Backtrace:
0 IBCocoaTouchPlugin 0x000000010383ddcc IBAttachToCocoaTouchTool + 1669
1 IBCocoaTouchPlugin 0x000000010383be9f IBAskClassInTargetRuntimeForValueForKeyPathUsingResultMarshallerWithContext + 147
2 IBCocoaTouchPlugin 0x00000001038b3963 IBReleaseIsWildcat + 1791
3 IBCocoaTouchPlugin 0x00000001038b3538 IBReleaseIsWildcat + 724
4 IBCocoaTouchPlugin 0x00000001038b357b IBReleaseIsWildcat + 791
5 IBCocoaTouchPlugin 0x00000001038389f9 IBReplaceClassNamePrefixWith + 1588
6 IBCocoaTouchPlugin 0x000000010383c82e IBBuildMarshalledDescriptionOfDocument + 2093
7 IBCocoaTouchPlugin 0x0000000103836515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
8 IBCocoaTouchPlugin 0x0000000103831cad IBUISegmentConfiguration + 2784
9 ibtool 0x000000010000829f
10 ibtool 0x0000000100006e0c
11 ibtool 0x0000000100003161
12 ibtool 0x0000000100001dbc
2010-10-26 17:07:22.017 ibtool[1428:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1431) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
2010-10-26 17:07:22.018 ibtool[1428:607] Assertion Failure: NO
2010-10-26 17:07:22.018 ibtool[1428:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-10-26 17:07:22.018 ibtool[1428:607] Line: 351
2010-10-26 17:07:22.019 ibtool[1428:607] Backtrace:
0 IBCocoaTouchPlugin 0x000000010383bf62 IBAskClassInTargetRuntimeForValueForKeyPathUsingResultMarshallerWithContext + 342
1 IBCocoaTouchPlugin 0x00000001038b3963 IBReleaseIsWildcat + 1791
2 IBCocoaTouchPlugin 0x00000001038b3538 IBReleaseIsWildcat + 724
3 IBCocoaTouchPlugin 0x00000001038b357b IBReleaseIsWildcat + 791
4 IBCocoaTouchPlugin 0x00000001038389f9 IBReplaceClassNamePrefixWith + 1588
5 IBCocoaTouchPlugin 0x000000010383c82e IBBuildMarshalledDescriptionOfDocument + 2093
6 IBCocoaTouchPlugin 0x0000000103836515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
7 IBCocoaTouchPlugin 0x0000000103831cad IBUISegmentConfiguration + 2784
8 ibtool 0x000000010000829f
9 ibtool 0x0000000100006e0c
10 ibtool 0x0000000100003161
11 ibtool 0x0000000100001dbc
2010-10-26 17:07:22.020 ibtool[1428:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1431) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception info:(null)
/* com.apple.ibtool.errors */
/Users/myusername/Development/iTennis/MainWindow.xib: error: ibtool failed with exception: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1431) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception info:(null)

TS3694 how can restore my iphone 3g error code 1015

how can i restore my iphone 3G error code 1015

Please see the More Like This section on the right

TS2446 why is my iphone always asking me for yahoo pswd. which never happened before then as soon as i put it in then a message will pop mf message error domain error 1032. So confused I do not even know what this mean . AND THIS HAS BEEN ONGOING FOR 3 WK

What does this mean on iphone when i am trying to access my email to my iphone (MFMessageErrorDomain error 1032.) Been like this for 3 wks. How can i get this right, it was never like this. Thank you for your help.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

[iPhone] unexpected error (0xE800003A) - installing app to device

Hi, I'm running into the "Your mobile device has encountered an unexpected error (0xE800003A) during the install phase: Verifying application" error while trying to install and run my app on my iPhone
Here is what I've verified
[1]. On my iPhone, Settings->General->Profile shows the Developer Provisioning profile I created on the developer program portal.
[2]. In XCode, Info.plist has the bundle identifier set to "net.companyName.AppName" (AppId on the dev program portal is magicNumber.net.companyName.AppName"
[3] Keychain Access shows a "Apple Worldwide developer certificate" and a "iPhone Developer: FirstName LastName" certificate". for the iphone developer certificate, it also shows a "FirstName LastName" private key.
[4a]. In XCode, after clicking Info icon for the project Target, I verified that "Code Signing Identity" and the next row ("Any Iphone OS device") are set to "iPhone Developer: FirstName LastName".
[4b] "Code Signing Provisioning Profile" and the next row ("Any iPhone OS device") are set to the developer provisioning profile mentioned in [1].
When I do a clean Build, I get a dialog that asks "codesign wants to sign ............"
However, if I attempt to "Build and Go", I get the 0xE800003A error message mentioned above.
Does anyone have suggestions on what trouble-shooting steps I can take to identify and fix the problem
Btw after running into the device installation problem mentioned above, I'm now running into problems with the simulator as well.
After a clean build, I tried to run the app with Active SDK set to the simulator.
However, now I get a "Failed to launch simulated application: iPhone Simulator failed to install the application." error. So I'm not even able to run the app in the simulator anymore.
(Btw I have the 2.0 SDK on my Mac. My iPhone has 2.1 on it. I'm assuming that this is a supported configuration.
I haven't installed the 2.1 SDK because I want to make sure that my app only relies on the 2.0 SDK and can run on 2.0 iphones.)

Hi, I've answered this on another thread, but I'll repost here... I think I may have encountered a simpler solution.
Rather then edit the Info.plist directly, you can use XCode to do this for you. However, your mileage may vary, this is only what worked for me!
The docs seem to be missing a couple of steps.
After you have edited the build info for your application (accessed by selecting 'Targets > APP_NAME' and then hitting 'Info' in the Xcode main navigation bar) click the 'properties' tab of the Info panel. Here you should see a number of fields (Executable, Identifier, Type, etc...).
By default you will see the Identifier field populated with the following: *com.mycompany.${PRODUCT_NAME:identifier}*, by simply changing this to *+your.domain+.${PRODUCT_NAME:identifier}*, your.domain being the domain you entered when you created your provisioning profile, you should be good to go!
So for example, say your company is +acme.com+, change your identifier to:
*+com.acme+.${PRODUCT_NAME:identifier}*
If like me, you also have a wildcard provisioning profile (I named mine general), you might use something like this:
*+com.acme.general+.${PRODUCT_NAME:identifier}*
This, of course, relies on you having created an App ID named +com.acme.general.*+. This is the profile I use to experiment with the Apple example apps.
Hope this helps someone!

Problem Launching iPhone simulator

Hi,
I am using the iphone simulator 3.1 with Xcode 3.1.4. When I installed the Iphone Simulator It worked extremely well. But after building 2 to 3 project it started giving me the error "error from Debugger: Failed to launch simulated application: Iphone Simulator failed to find process ID of com.yourcompany.Hello-world". I thought there might be the problem with the code but when checked thoroughly I found out this problem is with the simulator because the other project was also giving the same error. In the Xcode the projects were building without any error but when the code is build with simulator it was giving this error.
I reinstalled the Xcode and the simulator but still it was giving same error
Please help me out
Regards SACHIN

You would be best posting this in the Development Forums - this is for Technical Support on released software.

Aspen iphone simulator black screen

hello, I have a big problem today:
I am doing a simple piano, and I put 20 keys (on keyboard) with buttons
(only first 9 buttons) but when I add the number 10, and build n go
show me Succeeded NO ERRORS, good
ut the iphone simulator turned in Black screen, and dont show nothing... why ?
here is my .h and my .m (code)
please !
QUESTION: ... why if I add a
IBOutlet UIButton *pteclax10;
give me errors, I do not want to think Xcode only will let me use 9 buttons... please help me.
thanks again.....
here is my code in 2 pictures....
http://www.1572-8.com/fotos/fotos-server/iphone-dev/x-lio1.jpg
http://www.1572-8.com/fotos/fotos-server/iphone-dev/x-lio2.jpg
Message was edited by: imaumac

Have you tried actually running it on an iPhone or iPod Touch yet? That might make a difference.

Working with BDB SQL API (libsqlite3.a) on iPhone Simulator

Hi,
I downloaded latest BDB and got a static library libsqlite3.a by compiling the code on Mac OS X (1.6.8 64bit).
I am now trying to use this library as a drop in replacement into a SQLite project.
I copied the SQLite database (with only one table) to a new Berkeley DB.
I want to access this new Berkeley DB with existing code using SQLite.
I followed following steps:
1. Added (copied) libsqlite3.a from build directory to my project
2. Added #import <db.h> and left #import <sqlite3.h> as it is
3. compiled the code and ran it in iPhone simulator
The code runs fine until I go to prepare a statement. Please see the snippet from the function below:
- (void)initializeDatabase {
NSMutableArray *todoArray =[[NSMutableArray alloc] init];
self.todos = todoArray;
[todoArray release];
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:@"todo.db"];
if (sqlite3_open([path UTF8String], &database) == SQLITE_OK) { // This is ok, opens berkeley DB
const char *sql = "SELECT pk FROM todo";
const char *tail;
sqlite3_stmt *statement;
if (sqlite3_prepare_v2(database, sql, -1, &statement, &tail) != SQLITE_OK) { *// Fails here - table and records exist in Berkeley DB*
if (sqlite3_step(statement) == SQLITE_ROW) {
int primarykey = sqlite3_column_int(statement, 0);
Todo *td = [[Todo alloc] initWithPrimaryKey:primarykey database:database];
[todos addObject:td];
[td release];
} else {
NSAssert1(0, @"Failed to read from the table '%s'.", sqlite3_errmsg(database));
sqlite3_close(database);
sqlite3_finalize(statement);
} else {
NSAssert1(0, @"Failed to open database with message '%s'.", sqlite3_errmsg(database));
sqlite3_close(database);
The log dump:
GNU gdb 6.3.50-20050815 (Apple version gdb-1518) (Sat Feb 12 02:52:12 UTC 2011)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "x86_64-apple-darwin".sharedlibrary apply-load-rules all
Attaching to process 14578.
Pending breakpoint 1 - ""todoAppDelegate.m":109" resolved
Current language: auto; currently objective-c
/Users/kpotnis/Library/Application Support/iPhone Simulator/4.3.2/Applications/0322BCD5-4C71-498E-82EC-469133B7A935/Documents/todo.db: BDB0113 Thread/process 14578/2696754496 failed: BDB1507 Thread died in Berkeley DB library
Any thoughts?
Edited by: 868618 on Jul 11, 2011 4:51 AM

Hi,
I was looking over this and I was wondering if you've got the chance to progress with this issue or if you need assistance?
Thanks,
Bogdan Coman

HT1338 When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist
Note that if you are trying to download iTunes 10.7, that can be found here:
http://support.apple.com/kb/DL1576
Also, note that there is no reason to be anxious to get it, as the only thing added in iTunes 10.7 is compatibility with iOS 6, which will not be available until the 19th, and the new iPhone, which will not be available until later as well. The new iTunes that was announced is iTunes 11, which is also not yet available.

FTXP-error-Domain MWART fixed value does not exist- Message no. F4341

Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.

Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
   and enter values that represent the tax code for input tax which are
   encountering the problem.
   KALSM (tax procedure)
   MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
   This should only have a value "V" to represent input tax (or "A" if
   output tax).
5) The cause of the error F4 341 is when this column does not contain
   any value or is blank. Which means that there is no defined tax type
   "A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
   corresponding tax codes and complete all the customizing settings
   relating to tax on sales and purchases thereunder. Afterwhich you
   should no longer experience the error message.
Regards,
REnan

IPhone simulator Error: Domain=DTiPhoneSimulatorErrorDomain Code=1

Similar Messages

Maybe you are looking for