[iPhone] Which name for Signing Certificate?

I'm having problems submitting my app - I get:
"The binary you uploaded was invalid. The signature was invalid, or it was not signed with an Apple submission certificate."
I think it might have to do with the name I use to generate my certs. Should it be the "Agent" name or should it be "Account" name listed in your program portal contact info? (They are different- one's the company name, the other my name. On my other apps I used another account where they were the same, and didn't have this problem.)

This has happened to me before. I can't tell you the cause, but the problem went away when I followed some instructions that were listed in the Portal under (something like) "If you don't see an embedded provision...". I don't remember all the steps, but one of them was to delete the entire build folder from the project folder. Let me know if you can't find those instructions and I'll try to find them again.

Similar Messages

How can I find my account name for signing in to the sync option

I have a sync now button, but, no set up sync key, so I can't get the digits to sync to my new laptop. When I attempt on my new laptop and press the I don't have the other device key, it asks for information including my Account. I don't know where to find that name. I have the password and recovery key; just need to find the name of the Account.

You can only use pair a device if you have already setup Sync on another device because that is how pairing works: both devices need to be online and one device needs to be connected to the Sync server.<br />
The device that you want to add gives a 3x4 character pairing code that you need to enter on the device that has already Sync set up and that is currently connected to the Sync server (so you need to have both devices at hand).<br />
Then the Sync server uses this pairing code to connect to the second device and passes the name and password and Sync key from the first device that has Sync set up to that second device that you want to add.
Enter all details like the account name (email address) and password and the 26-character Sync key manually to connect to an existing sync account instead of using the 12-character code to pair a device if pairing isn't possible.
# open "Firefox > Set Up Sync..." or "Tools > Options > Sync > Set Up Firefox Sync"
# click "I Have an Account"
That brings you to the "Pair a Device" window that shows a 12-character code that you can enter on another device that has Sync set up.
If that isn't possible then click "I don't have the device with me" at the bottom to enter the account settings (email, password, sync key) manually.

Renewing Self Signed Certificate for WAAS Central Manager

Hi,
We would like some help from you about the following: We have an WAAS Central Manager which its self-signed certificate validity has expired as showed below:
Validity
Not Before: Jul 7 00:47:06 2009 GMT
Not After : Jul 6 00:47:06 2014 GMT
We have used its certificate to install some other remote WAAS Express routers.
We would like to know the following:
1. is it possible to renew this certificate? or
2. do we need to reinstall another certificate on CM and replicate this new one on these waas express remote devices?
If affirmative for at least one of them, please, could you share any document that describe how to do it?
I have attached some output commands from our CM.
Thanks,
Marcelo

attaching file now!!!

How do we create self-signed certificate using java packages

Hi All,
I require some information on creating self-signed certificate using java packages.
The java.security.cert.* package allows you to read Certificates from an existing store or a file etc. but there is no way to generate one afresh. See CertificateFactory and Certificate classes. Even after loading a certificate you cannot regenerate some of its fields to embed the new public key – and hence regenerate the fingerprints etc. – and mention a new DN. Essentially, I see no way from java to self-sign a certificate that embeds a public key that I have already generated.
I want to do the equivalent of ‘keytool –selfcert’ from java code. Please note that I am not trying to do this by using the keytool command line option – it is always a bad choice to execute external process from the java code – but if no other ways are found then I have to fall back on it.
Regards,
Chandra

I require some information on creating self-signed certificate using java packages. Its not possible because JCE/JCA doesn't have implementation of X509Certificate. For that you have to use any other JCE Provider e.g. BouncyCastle, IAIK, Assembla and etc.
I'm giving you sample code for producing self-signed certificate using IAIK JCE. Note that IAIK JCE is not free. But you can use BouncyCastle its open source and free.
**Generating and Initialising the Public and Private Keys*/
public KeyPair generateKeys() throws Exception
      //1 - Key Pair Generated [Public and Private Key]
      m_objkeypairgen = KeyPairGenerator.getInstance("RSA");
      m_objkeypair = m_objkeypairgen.generateKeyPair();
      System.out.println("Key Pair Generated....");
      //Returns Both Keys [Public and Private]*/
      return m_objkeypair;
/**Generating and Initialising the Self Signed Certificate*/
public X509Certificate generateSSCert() throws Exception
    //Creates Instance of X509 Certificate
    m_objX509 = new X509Certificate();
    //Creatting Calender Instance
    GregorianCalendar obj_date = new GregorianCalendar();
    Name obj_issuer = new Name();
    obj_issuer.addRDN(ObjectID.country, "CountryName");
    obj_issuer.addRDN(ObjectID.organization ,"CompanyName");
    obj_issuer.addRDN(ObjectID.organizationalUnit ,"Deptt");
    obj_issuer.addRDN(ObjectID.commonName ,"Valid CA Name");
    //Self Signed Certificate
    m_objX509.setIssuerDN(obj_issuer); // Sets Issuer Info:
    m_objX509.setSubjectDN(obj_issuer); // Sets Subjects Info:
    m_objX509.setSerialNumber(BigInteger.valueOf(0x1234L));
    m_objX509.setPublicKey(m_objkeypair.getPublic());// Sets Public Key
    m_objX509.setValidNotBefore(obj_date.getTime()); //Sets Starting Date
    obj_date.add(Calendar.MONTH, 6); //Extending the Date [Cert Validation Period (6-Months)]
    m_objX509.setValidNotAfter(obj_date.getTime()); //Sets Ending Date [Expiration Date]
    //Signing Certificate With SHA-1 and RSA
    m_objX509.sign(AlgorithmID.sha1WithRSAEncryption, m_objkeypair.getPrivate()); // JCE doesn't have that specific implementation so that why we need any //other provider e.g. BouncyCastle, IAIK and etc.
    System.out.println("Start Certificate....................................");
    System.out.println(m_objX509.toString());
    System.out.println("End Certificate......................................");
    //Returns Self Signed Certificate.
    return m_objX509;
//****************************************************************

Common Name on SSL certificate

I was wondering if anyone can tell me whether the Common Name on the SSL certificate (which I plan to request from Verisign) MUST be the same as the name of the Sun One 6.0 SP6 web server instance.
For example, if my server name in the Servers tab is "svr9999.mycompany.com" but I have a DNS alias giving the machine the name "www.mycompany.com", can I use the "www.mycompany.com" name for the certificate, or does is have to be the actual "svr9999.mycompany.com" name in the Server tab?
If that is possible, is there any "special" stuff I need to do to accomplish it?

Yes, I found today that it worked fine to make the Common Name on the certificate be the DNS name I want the world to use (even though it differed from the internal name of the server instance).

ASA self-signed certificate for Anyconnect 3.1, which attributes?

Hi everybody,
I can't find the detailed information which attributes are exactly needed for the Anyconnect 3.1 client to correctly identify the VPN server -ASA 8.4(4)1
I have added two servers in the client connection profile:
IP address, primary protocol IPsec
IP address/non-default port number, primary protocol SSL
Connecting via IPsec only issues a warning about "untrusted source" (I didn't import the certificate as trusted, but that's not the issue)
Connecting via SSL issues an additional warning "Certificate does not match the server name".
The self-signed certificate (created with ASDM) includes the IP address as DN cn, additionally as alternate identity "IP address". I have exported the certificate and parsed it with openssl (after re-encoding to PKCS#12 DER) and apparently no attributes are included.
I would like to give it a try with certtool and openssl to generate a self-signed certificate which is accepted by the Anconnect 3.1, where can I find a detailed description, which attributes are required for Anyconnect SSL sessions? I'm convinced the identity (DN cn) is OK.

Shamelessly bumping this question,
Anyone out there (maybe from Cisco) who can tell us, which atttributes are required on a self signed certificate?
I keep getting "Certificate does not match the Server Name" for SSL-VPN, IPsec-VPN is fine for the same server.

I had an app which disables an iPhone to connect to the internet via mobile network. In the meantime I have deleted that app but it still affects my phone. For example iPhone shows that 3G sign on the top (next to the time) but it is unable to open any we

I had an app which disables an iPhone to connect to the internet via mobile network. In the meantime I have deleted that app but it still affects my phone. For example iPhone shows that 3G sign on the top (next to the time) but it is unable to open any website. Is there anything I can do about it?

What was the app you are referring to? I'm not aware of anything on the app store that is designed to do that, unless you're talking about an app that was causing a problem...
Was/is your phone jailbroken?

HT3529 I have iMessage service in my mac & it works perfectly. I buy iPhone 5 When I sign in with my appleid to activate iMessage it says "iMessage Activation The user name or password for ... was incorrect Try again" but its all correct. what do i do? my

I have iMessage service in my mac & it works perfectly.
I buy iPhone 5
When I sign in with my appleid to activate iMessage it says "iMessage Activation The user name or password for ... was incorrect Try again" but its all correct. what do i do?
my appleid is from saudi iTunes Store
I'm so disappointed

1. Make sure software is up to date
2. Make sure Messages is enabled; Settings>Messages
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

Why, when I successfully connect to Server 2012 Essentials R2 via Anywhere Access does the Remote Desktop Connection use the self signed certificate for RDP instead of the SSL certificate I installed when I set up access anywhere?

Scenario:
Windows Server 2012 R2 Essentials
I purchased an SSL Cert from GoDaddy and I managed (after some challenges) to set up Anywhere access to use that new SSL Cert. I to rebooted the server and I am able to login to Anywhere Access vis https (using the SSL certificate) from PC, Mac and iOS.
So far so good.
The problem I am having is that when I click to launch a remote desktop connection to the server RDP connection wants to use the self signed SSL certificate of the server rather than the SSL Certificate I installed into Anywhere Access. As a result, I get
a security warning like this: "The identity of the remote computer cannot be verified. Do you want to connect anyway?"
The name in the certificate appears as ACME-SERVER.ACMEDOMAIN.local instead of the SSL Certificate I installed, which is
remote.acmedomain.com
If I lick to accept, RDP does work fine, it;s just using a self signed certificate. I want it to use the trusted certificate that I purchased and installed.
My guess is that there must be an additional step to tell Anywhere Access that when it generates the RDP session that it should use the cert? OR, is this just how it works?

Because....
the server does not have a 'trusted' certificate assigned to it.
Only the RDP Gateway has the trusted certificate for the external name.
If you want to remove that error, you have to do one of the following:
Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
So, something like,
server.domain.publicdomain.com
Or,
Install that certificate on your remote computer so it is trusted.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

CA signed certificate for Jabber 4 windows

Hi,
I have a CA signed certificate for my J4W which is working my question is how can I get J4W when you login the first time after installation not to prompt for you to accept the certificate and it does it 4 times, after that you never get it a again, but for bulk roll out purposes is there a way I can bypass this issue?
Thanks in advance.

I'm just working through this too, with a Microsoft domain-integrated CA.
Some of the other posts were not clear in regard to WHICH cert gets dealt with in which way. Someone please let me know if this process below is inaccurate or incomplete.
Assuming you have three different severs and only one of each type: CUCM, IMPS, UCxN
-Generate CSRs for the CUCM, IMPS, UCxN tomcat self-signed certs and export them as clearly named CSR files (3 of).
-Generate a CSR for the IMPS xmpp self-signed cert and export it as a clearly named CSR file (1 of).
-Sign all four CSRs with the CA web browser https://ipaddress/certsrv.
-Export the CA's root certificate in Base64 format using the cert authority name as the file name (only for clarity) e.g. mydomain-AD-CA.cer. Do not rename the file after download.
-Import the CA's root certificate into each Cisco UC server's tomcat-trust and into the IMPS xmpp-trust. This must be done before the next step.
-import the CA-signed Cisco UC server SSL certs (that started out as CSRs) as tomcat certs. Import the CA-signed xmpp cert as an IMPS xmpp cert. This replaces the tomcat (and IMPS xmpp) certs with certs that have been signed by the CA.
-restart the Cisco Tomcat feature service and the Cisco XMPP Router service on each Cisco UC appliance using the CLI "utils service restart Cisco Tomcat"
-restart the Cisco XCP Router network service on IMPS.
-Install the CA's root certificate into the client's (assuming Windows) Manage User Certificates > User > Trusted Root Certification Authorities cert store. If you have a domain-integrated MS CA, this will already exist (and should exist, or something else is wrong, or not completed yet with the PKI Infrastructure setup). Look in the User > Trusted Root Certification Authorities cert store - if you can see the CA's root cert that you just installed = great.
-Test 1: Browse to CUCM by FQDN using IE. https://cucm.mydomain.com/ccmadmin. You should get a perfect alert-free connection to CUCM. This proves that the PKI infrastructure is good.
-Test 2: Start J4W. It should start up without any popup alerts providing the UC Service Profile and CSF Device config only use FQDNs, that match the certificates you signed with the CA
-BTW: If you've previously manually accepted J4W popup alerts, before starting J4W go into Manage User Certificates on the Windows client and find and remove all self-signed Cisco UC appliance certs. Leaving them there will fool you into thinking you've done a complete job when in fact it's not the case.
---Well that 's the theory anyway.

How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) PLEASE HELP ME!!

I have gone to this website almost everyday for years and I have not changed anything in my internet settings, but now I'm getting this message: secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) The only thing I KNOW I did differently, was I installed a CAC reader to my computer, since then, this has been happening. Is there a setting I can change?? E-mail is: [email protected] Thanks! Megan

There were recently several users getting this error code who use AVAST 2015. If you recently got that program, please see:
* [https://support.mozilla.org/questions/1029578 Can NOT access https://www.google.com for google voice, mail etc.]
* [https://support.mozilla.org/questions/1028985 Avast Forum connection failed - works in Chrome etc.]
* [https://support.mozilla.org/questions/1028190 Since last FF update I can't sign out of Yahoo and when I close FF it tells me it has crashed.]

Adobe Reader 11.0.09 - some certificates no longer accepted for signing PDF forms

After installation of the patch 11.0.09 of Adobe Reader some certificates are no longer accepted for signing (not enlisted in list of certificates) when clicking the sign fields of PDF forms. The forms were created using LiveCycle Designer.
Is it by design or is it a bug? If it is by design, what is the change, which caused this behavior? We are facing the problem, when our users are no more able to sign the request forms using their client certificates.
The example is on the following screenshots.

Hi Milan,
Yes, there has been some enhancements in this domain, You may check the release note of 11.0.09:: 11.0.09 Planned update, Sept 16, 2014 — Acrobat and Adobe Reader Release Notes
General information about digital signatures: http://www.adobe.com/devnet-docs/acrobatetk/tools/DigSig/index.html
Regards,
Ajlan Huda.

What code signing certificate has to be added for Adobe Air Native Installer?

Hi,
I'm developing Adobe Air application. I need to digitally verify the application to add the publisher's name with the product. I did a little research and came to know that Symantec, Thawte, Comodo, Comodo-Tucows, Digicert, Godaddy and couple of others are doing this.
Yes. I'm talking about the Code Signing Certificate. My question is, What code signing certificate has to be added for Adobe Air Native Installer? The reason is, The native installer will have an extension .exe ( Windows ) and .dmg ( MAC OS X ).
These guys are providing certificate for Adobe Air. For instance, If the application is exported using Native Installer in Windows, The application will have an .exe extension. For this, Can I use the same Adobe Air code signing certificate or Should I go for Microsoft Autheticode ( for .exe ) certificate?
Thanks in advance.

I think comodo code signing certificate is one of the nice option to be added for Adobe Air, as i have seen comodo code signing certificate in other adobe programs. Recently i bought comodo code signing from https://cheapsslsecurity.com/comodo/codesigningcertificate.html, to sign one of my adobe application and it works fine, you can use microsoft authenticode technology with comodo code signing.

I cant signed on the game center on my iphone.which is a japan lock how can i fix this?

i cant signed on the game center on my iphone.which is a japan lock how can i fix this?

Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

[iPhone] Which name for Signing Certificate?

Similar Messages

Maybe you are looking for