IPhoto '08 Preferences- opening but not allowing changes and freezing up

My problem with preferences is that it does open up but when I go to change a preference it freezes up and then iPhoto stops responding all together. Can someone please help?
Thanks!

Valt74
Start with the basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Similar Messages

  • After upgrading to Yosemite my iPhoto won't open, update not allowed

    Recently updated to Yosemite and now my iPhoto can't be opened, I tried to update the app from the App Store but it tells me that I am not the original purchaser (I am, I've never had another Apple account).

    Recently updated to Yosemite and now my iPhoto can't be opened, I tried to update the app from the App Store but it tells me that I am not the original purchaser (I am, I've never had another Apple account).
    The error message is not very appropriate. It essentially means, that the iPhoto that is currently installed on your Mac is not associated with your AppleID.  It may suffice to accept iphoto and other iLife applications to your AppleID.
    Sign into the App Store with your AppleID (from the Store menu), open the "Purchases" tab and check, if there are any preinstalled apps that need accepting. Then press the "Accept" button.
    Now try again to update or reinstall.
    If iPhoto does not show on the Purchases tab at all, delete iPhoto from the applications folder (don't empty the Trash), then go to the main tab of the Apple Store (the Featured tab), enter iPhoto in the search field, and install.

  • System preferences on network not allowing changes

    Hi, my network is running slow and so I went into sys pref to check it out and when i went into the network dialog box it says that a change has been made to my system by another application with an "ok" box. when i hit "ok" that box just keeps coming back. I was trying to run a diagnostic on my network preferences. I can force quit to get out but otherwise this happens on both my pc and my laptop here at home. Haven't checked it on wifi elsewhere.

    This is happening to me too. Did you ever find a solution?

  • ICal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed on alert.

    iCal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed.

    Calendar (not called iCal anymore) does not include that capability any longer, apparently.  What you have to do now is go to Automator and create a Calendar Alert action.  You can add a Run AppleScript object to the action and paste in your script there, then when you save it, it will become available as a choice in the alert menu in Calendar.

  • My iPhone has the correct Apple ID for everything BUT iCloud.  How do I change that.  Going through Settings shows the incorrect ID but it does not allow change.

    My iPhone has the correct Apple ID for everything BUT iCloud.  How do I change that.  Going through Settings shows the incorrect ID but it does not allow change.

    Settings > iCloud > delete account
    You want to keep all content on your iPhone
    Resign back in

  • System setting does not allow changes to be made to object LSYS

    Hi
    Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
    Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
    System setting does not allow changes to be made to object LSYS
    Why it is saying like that . But i can able to include the other process types in the process chain .
    regards
    mohammed

    Dear Mohammed,
    Since you are trying to create process chain in production system.
    Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
    Check the settings in SE06. system would be non-modifiable for sure.
    in SCC4,  settings ->"changes to the cross customizing objects would be not allowed"
    These two settings/configurations would not allow any development or changes or edit or create in production.
    Please check with your basis folks and proceed further.
    Hope this would help you more in understanding

  • System settings does not allow changes to be made to object

    Hi,
              In one of my test system, when i tried to change the object  its displaying following error message.
    System settings does not allow changes to made to the object.
    I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
      I would like to know, how to change the object in the namespace.
    Regards
    Srikanth

    Hi,
    In SE06, in addtion to system status and component status, check the namespace status too.
    It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
    To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
    Regards,
    Srikishan

  • System setting does not allow changes to be made to object

    Hi experts,
      I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
    "System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

    Hi,
    If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
    Or you  can find the text in the note:
    «/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
    Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
    Regards,
    André Nunes

  • Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

    I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

    Greetings Kwnez
    I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
    Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
    is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
    What I'm saying is "Are we on the same Page"

  • The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    Hi there,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Additionally, you may want to try completely disabling and re-enabling restrictions.
    -Griff W.

  • Computer says firefox is open but cant be found so I have to close computer and start over. computer says firefox is open but not responding

    computer on,icons showing,open firefox and I get a firefox is open but not responding.Computer tells me to close computer programs and restart. when I go to close, no programs are open. I hit cancel on shutting down and go back to firefox icon and It opens.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have  a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

    QUESTION.
    Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
    I am using  a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading  Iphoto ?
    I hope that someone is able to help in this matter , as i have to restore 12000 photos !
    Thanking you in anticipation.
    Alan from Wigton

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

  • How to allow some fixed extension go in from outside to inside but not allow go from inside to outside

    how to allow some fixed extension go in from outside to inside but not allow go from inside to outside
    for example, allow JPEG, MOV, AVI data flow from outside to inside
    but not allow JPEG, MOV, AVI files access or upload or get by outside, in another words not from inside to outside
    how to configure?

    Hi,
    The ZBF link sent earlier show how we can inspect URI in http request
    parameter-map type regex uri_regex_cm
       pattern “.*cmd.exe”
    class-map type inspect http uri_check_cm
       match request uri regex uri_regex_cm
    ZBf is the feature on Cisco routers and ASA though concepts are little same but works differently. However it is important that you can be more granular with the protocol (layer 7) inspection only. Like on ASA if you will try to restrict .exe file from a p2p application that won't be possible, But on router you have some application for p2p in NBAR and you can use it file filtering. Please check configuartion example for both devices.
    Thanks

  • When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

    when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on.  When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back.  I never noticed this with os leopard, Just after i installed os snow leopard.  All software is up to date only I think, thanks to apple they droped support for logic express.  Thanks for any suggestions.

    Does toggling CC off & back on bring it back?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Field VBUND does not allow changes to the document ?

    If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
    I can't change trading partner.
    Thanks!!
    Message was edited by: Rico Wang

    Rico,
    Using trn code SM30, modify table V_TBAER and insert the entry
    BSEG-VBUND for account type S, D, K, A
    and see the effect.
    Thanks
    Mohit
    ps: you may want to check OSS notes as well.

Maybe you are looking for

  • Variable length in substring

    i am trying unsuccessfully to write a udf, as suddenly the fixed length field i was using a substring on has changed to a variable length field... i need to pass the field into a UDF and then pass out the last two characters for one field... and the

  • How to use MacBook pro with ERP software like SAP B1

    We are using Sap B1 how to use with MacBook pro, it is easy with PC to set up.

  • Nonempty list of broken DCs error when we assemble using CBS

    Hi We created DC and we are going to assemble using CBS. When we assemble, we got below error. Info:Starting Step Check-assembly at 2005-03-15T10:13:57.0250-8:00 Fatal:Contact CBS administrator: Nonempty list of broken DCs -stopping export now Error:

  • Synchronisation of input and output using myDAQ

    Hello! I am currently using the NI myDAQ and use both analoge output. and both analoge inputs. The sampling rate needs to be as high as 200k Hz. (Also within the while loop I do quite a lot of data manipulation and saving into text files.)  My vi wor

  • IPod Shuffle - using it on two computers wipes the contents

    I have an old iPod shuffle first generation with most of my music on my laptop.  I actually have very little music on, and I have some different music on my main iMac.  I want to plug the iPod into big iMac to charge it, but when I do that it wipes a