IPhoto 09 no longer works after Lion 10.7.3 upgrade from Snow Leopard 10.6.8, so I upgrade iPhoto 11 but still not working.

Here is the first 24 lines of the User Diagnostic Report:

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Similar Messages

  • How long does it take to migrate mail data from snow leopard to lion. Waiting for hours

    OK, so here I thought I was solving a calendar sync problem by updating my OS from 10.6.8 to 10.7.3. Initially unable to load the mail app, however this seemed to work after taking out the "envelope index" file as suggested in this forum. New mail program loaded, but now stuck with rolling blue and white candy bar on a window inside the "Mail Upgrade" window stating "migrating data ...".Thinking I might simply have a lot of data I waited 5 (!!) hours,... No change. I went back to Finder and once again removed the envelope index file as well as all files with a .plist extension. Again started mail, again stuck with the screen "migrating data". So my question: Do I just have to wait (and then for how long? Days?), or do I have to tweek my MacBook Pro a little to be able to once again read and write e-mail?
    Thanks

    12 hours and did not finish. Still left with the message: migrating data. I cannot imagine what the program is doing.
    So I force quit mail and cleaned up everything I know to clean up: went to folder "~/library/Mail" and deleted everything I thought was not needed. Emptied the trash. Now, of course, I have a fair amount of mails in different folders that are stored in the mail program. But from a total data amount point of view this should be trivial.
    Restarted mail, get the screen: "Mail Message Import", click "Continue"
    Then program successfully imports 4563 messages in less than 2 minutes.
    Then - once again - rotating candy bar with message "migrating data ..."
    There is no way to see what is actually happening and no way to stop the process other than force quit.
    Help!!!

  • Final Cut X super slow after lion...Ran great on Snow leopard

    I grabbed Final Cut X as soon as it was released before I recieved my copy of Lion. As soon as Lion was installed my system went turtle. I'm staring at spining balls more than I am editing. I had a Mac Pro at the time so as a test I partitioned a copy of Snow Leopard. Zoooooom. It was great.
    I have since bought a new mac and now I'm back to the same terrible performance with no hope of Snow Leopard. Has anyone else experienced this? Has anyone found a solution?
    I thought Mountain Lion might correct the issue but it is the same if not worse. Sooooo painful...
    thanks....

    I've heard, but can't verify, that FCS should be installed after Snow Leopard.
    Before reverting your OS, try do a complete uninstall of FCS -
    http://www.digitalrebellion.com/fcs_remover.htm
    then a re-install.
    Message was edited by: joey848

  • After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

    After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
    Anyone know what is wrong with it??
    Is something wrong with mountain lion or the wifi itself????
    HELP PLEASE!!
    I need to use the internet desperately but i cant...
    Thank you so much xxx

    Hi galleryskins,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    OS X Mountain Lion: Zoom content on the screen
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    I hope this information helps ....
    Have a great day!
    - Judy

  • I upgraded to mountain lion from snow leopard, now my photo studio software is no longer supported by powerpc. Does anyone know of a fix so my photostudio will work?

    I upgraded to mountain lion from snow leopard, but now some of my applications do not work, most specifically I would like to use my photo studio, but now it tells me that powerpc is no longer supported.  Does anyone have any fixes to this problem? I would really like to continue to use software that I already have! Thank you for your help!

    PPC software will not work in Mountain Lion because there is no longer any Rosetta emulator. You will only be able to run your older software by creating another partition on your hard drive on which you can install Snow Leopard. It need not be a large partition since you can still keep your files and programs on the main partition. You could also install Snow Leopard on an external drive from which to boot the computer.
    To resize the drive do the following:
    1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    After you create the new partition boot the computer from your Snow Leopard DVD and install Snow Leopard onto the new partition.

  • I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

    I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
    ^^ that's the main problem. Here's the full history.
    I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
    Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.

    After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
    Now iám using mac os 10.8.2
    I can see the server, I can choose the drive, but when try to open a folder the message on Finder is: You don't have permissions to see the content.
    I already delete the key and try to connect again, but the problem persist. Already try change the ip from file server. Already try differents users. (admin, guest, etc...)
    I have a windows server 2008 and a NAS working with SMB protocol. Both with the same problem.
    That problem occurs only on Finder, if I try see the folder by Terminal, is possible to see my files.
    Any Solution ?
    Any Tip ?
    Any Question ?

    Not knowing how much RAM is installed in your iMac, your iMac can take a total of 8 GBs of RAM.
    Before upgrading to Mountain Lion, I would strongly suggest installing the maximum 8 GBs of RAM.
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    Here is OWC's link to your model iMac and the RAM modules you will need.macsales
    http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
    You can purchase and download OS X 10.8 Mountain Lion from the Mac App Store in the OS X dock.
    Before installing, it would be prudent to make a backup copy of all of your important data or your entire current system. Either using, optical discs, USB flash drives or external hard drives.
    This is too insure protection of your data in case something goes wrong with the install of OS X Mountain Lion.
    Good Luck!

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • HT4759 updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

    updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

    Ok 1st one. The warning restriction message relates to this line in main.cf:
    smtpd_helo_restrictions = permit_sasl_authenticated  permit_mynetworks  check_helo_access hash:/etc/postfix/helo_access  reject_non_fqdn_hostname  reject_invalid_hostname  permit reject_invalid_helo_hostname
    The last reject occurs after the single word "permit" and is ignored.
    However, that's not the problem.
    I'm not exactly sure what's happening, but this might be a clue.
    It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions.  You might need to ramp up the debug level to get a better idea.
    You could check if it's being created by "netstat -a | grep private/policy" in terminal.
    My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up.  Private/policy I think relates to grey listing.  Maybe gives you a hint.

  • Iphoto wont start after migration from snow leopard to mountain lion

    Hello everyone hope you can help me, I've migrate from Snow Leopard to Mountain Lion and my IPhoto (8.1.2) won't start, I cant reinstall from app store because it came with the copy of Snow Leopard already instaled on my Imac...And I cant find the original Disc, so anyone can help ? felling desperate...

    You should be able to Software Update and that will bring your iPhoto up to date.
    iPhoto was 9.2.3 at 10.6.8, so I don't know why yours was stuck at 8.1.2
    However you can stick the #2 10.6 disk into your machine and should be able to run the bundled app installer.
    If that doesn't work there is Pacifist from CharlesSoft that you can extract iPhoto and replace your corrupted one, then run Software Update to bring it current.
    Once you have replaced iPhoto, rebuild the database
    https://support.apple.com/kb/HT2638
    If your still having problems, perhaps a user account or drive permissions issue
    ..Step by Step to fix your Mac

  • After updating to Mavericks from Snow Leopard, everything works except iPhoto. If I buy the current version of iPhoto for $15, will it work on Mavericks?

    After updating to Mavericks from Snow Leopard, everything works BUT all my photos were lost. If I buy the current version of iPhoto for $15, will it run on Mavericks?

    If you have iPhoto from iLife '11, then I would first install it on your computer. In that way you would be able to get the new iPhoto free since you are running Mavericks.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.

  • Do I need to update Bootcamp 3.3 after upgrading from Snow Leopard to Mountain Lion?

    Do I need to update Bootcamp 3.3 after upgrading directly from Snow Leopard to Mountain Lion? If so, what is the recommended version for my machine?
    Other pros and cons we should consider? Not sure what is considered best practice.
    We have a mid-2011 iMac (12,1) running Win7 64bit. Concerned about firmware updates not being compatible with Bootcamp 3.3. Firmware updates forThunderbolt port were part of post-Mountain Lion updater install. Not sure what other firmware/boot changes might have been applied to support the new recovery partition, for example. Will the 3.3 windows control panel still work safely?
    Win7 still boots OK, at least for now. Backup is current.
    I'd like to get the entire machine current again. Bootcamp 5.0 didn't want to download (appeared to hang writing to my external drive, which is otherwise fine). Bootcamp 4.1 refused to install on Win7 (claimed it wasn't for my machine, so I aborted. Downloaded from apple support page directly).
    I've searched the forums for this specific question - I see plenty of info for upgrading Bootcamp 4 to 5, but nothing for 3 to 5.
    Thanks much in advance,
    -b

    Appreciate the quick response.
    There are basically 2 schools of thought here:
    - If it ain't broke, don't fix it.
    - Don't fall off the upgrade cycle (apply patches whether you have an issue or not in order to ward off trouble before it happens).
    I don't have a specific issue that I'm chasing on the Win7 side right now. I'm attempting to address having fallen off the upgrade cycle by staying on Snow Leopard too long.
    I appreciate that the Win7 side under bootcamp is its own thing (upgrades to Mac OS don't cross over or effect the bootcamp partition) - except where firmware upgrades coming out of Mountain Lion change the hardware interface to Win7. Hence my questions.
    -b

  • After upgrading to Lion from Snow Leopard, mail server does not receive incoming email

    After upgrading my server last night [2011.07.20] from Snow Leopard to Lion, my mail server settings went belly up.  After toying around with the server, its certificates and what-not, I was able to get it running, but it is no longer receiving any emails [neither internally nor from Gmail, Yahoo, etc.].
    I can send emails via SMTP just fine [using SSL] to external email accounts [and it doesn't complain when I address an email to an internal email account, but I can't verify that it's sending it to the internal email account because it won't receive!].
    The Connection Doctor says that it is indeed connecting properly to the server [incoming = IMAP, outgoing = SMTP], so there is communication between Mail 5.0 [and also Thunderbird as well] and the mail server.  The problem appears to be the mail server not receiving any emails - from internal or external addresses.
    Anyone else having this problem or know of a fix for it?
    Thanks!

    Did you find a solution to this issue?  My mail server is doing the same thing.  I've tried six migrations now, and have a couple of tickets open, but they all have issues.  I have worked around all of them except the mail server problem.
    I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly.  The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
    I see errors like this littered in the logs:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
    Do you see anything similar?

  • Hello,  I have  upgraded my laptop to lion,  from Snow Leopard,  but now my Music Pad Pro,  program will not work ,   can anyone help?  Thank you.

    Hello,  I upgraded my laptop from Snow Leopard to lion,  unfortunately I have a  2 music programs that no longer work.  one is called the Music PadPro,   which is now gone bankrupt,  can anyone help?.   I was talking to the Apple Store earlier and they said if I upgrade to the mountain lion it may help but I'm not so sure,
    kind regards
    Nigel

    There's no reason that upgrading from Lion to Mountain Lion would make this application work.  I've looked up Music PadPro.  I don't know much about it, but it looks pretty old.  Here are the requirements:
    Macintosh G4 or higher processor running Mac OS X Version 10.2.6 (minimum),
    Mac OS X Version 10.3.2 (recommended), or Mac OS X Version 10.4.2.
    Looking at that, I would guess that the application would require a PowerPC processor.  After the release of the Intel machines back in 2006, Apple included something called Rosetta within OS X.  This allowed programs developed for the older architecture (PowerPC) to run on the newer Intel machines.  The reason for this was to give developers some time to upgrade their applications to run natively on Intel processors.  It was only with the introduction of Lion that Apple pulled Rosetta from their OS.  They had basically given developers about five years to upgrade their applications.  Unfortunately, in your case, the developer went belly up.  You can always install an older version of the OS on either a separate partition or an external drive and you can run your program from there.

  • Can I continue to use Fusion to run my PC version of Quicken 2006 after I upgrade to Mountain Lion? I'm currently on Snow Leopard.

    I am considering upgrading my OS on my 2008 iMac from Snow Leopard to Mountain Lion. However, I use Fusion to run my PC version of Quicken 2006 and have heard that I will no longer be able to do that. Any suggestions?

    You can continue using it without any problem. However, check that you are running a VMware Fusion version that it's compatible with Mountain Lion (VMware Fusion 4 and 5 are compatible with Mountain Lion). If you upgrade and you want to use a non-compatible version, you will see kernel panics.
    Also, make a backup before upgrading, although everything should work properly after upgrading to Mountain Lion

Maybe you are looking for