Rebate agreement-Difference coming for credit note value and drill down value .

Hello Friends,
In 2013 we had created one rebate for which the validity period was 1st April 2013 to 31st March 2014 . At the end of each month, rebate amount was settled by raising credit note to the customer . Now at the end of March'14 during final settlement, a credit note was raised to the customer . The issue here is there is difference of 1.13 (Pounds) between credit note value and the drill down value for March'14 . Lets say our credit note value is-100 (Pounds)and Drill down value for the month March'14 is 101.13 Pounds. We are not able to find out why this difference is coming . Please let me know your inputs on this .
Regards,
Sandeep G. 

Sandeep -
During final settlement of a rebate agreement, it calculates rebate amout for the the entire time period less payments already made to a customer and then issues a credit memo request based on that.Please check all the the invoices created during entire period and check accrual calculation.It should match.
You can check VBOX table to get billing documents for the entire period.
Let us know if you still have an issue.
Thanks & Regards
Amit Gupta

Similar Messages

  • Value Contracts for Credit note

    Dear Friends,
    Can we create Value contracts for Credit note processing?
    Please refer to the below scenario:
    I have certain budget that needs to be distributed to some of the customers depending upon the claims (Credit Notes).
    This budget is included in Value contract and values are released through orders (Credit note order). I specify total budget in Target Value of Value contract and as and when the credit note is created, the value of credit note is updated in Released Value.
    But when I create credit note, order value is being captured in Negative in released value of Contract document.
    If total target value is utilized, I need to restrict the user to create more credit note orders with reference to Value contract.
    Can anyone please help with the scenario.
    Regards,
    Praveen.

    Dear Sri,
    These are the steps to to configure the output type for credit note.
    SPRO>IMG>Sales and Distribution>Basic Functions>Output Control>Output Determination>Output Determination Using the Condition Technique-->Maintain Output Determination for Billing Documents
    -->Maintain Condition Tables
    -->Maintain Output Types
    -->Maintain Access Sequences
    -->Assign Output Types To Partner Functions
    -->Maintain Output Determination Procedure
    -->Assign Output Determination Procedures
    Here you just copy the standard output type RD00 then rename it according to you, then assign the Z form for that output type.
    Maintain condition record through VV31 transaction with your credit note document type.
    I hope this will help you,
    Regards,
    Murali.

  • Release Strategy for Credit Note un the QM Module

    Good SAP Guru's,
    I have a very important question for you:
    Is it possible within in the QM module (Transaction QM12) to implement a Release Strategy based on the value of the credit note to be created.
    This should work on the same lines as the Purchase Order Release strategy.
    Any guide lines and/or assistance will be gratefully appreciated.
    Kind regards,
    Leslie

    Dear Leslie
    We had done a similar kind of development in notification, not for credit memo though , but certainly can be incorporated in this case.We had done this for approving Short shipment and devaitions. If there has to be short shipment to be sent to a customer  a notification will be trigered to manager and if he approves it will go for higher approval.
    Please find my suggestion for this development
    1) Make 3 task codes. for eg Task 1 for  credit note is for less than u20AC500.00 . Task 2one for more than 501 and Task 3other one for more than 2001.
    2) According the need of the credit notes to be created let the user assign the task and release it.
    3) For task no 2 and task No3 a workflow triggers to the corresponding roles Sales manager & General Manager. ( please note that notifications are workflow freindly and standard workflows are available for the same)
    4) if Manager wants to approve he can make the Task Complete. ( Notification tasks have 4 stages, outstanding, release, complete, Succussful)
    5) Based on the status of the task you can make use of the action box in notification for creating the credit memo.
    6) The credit memo creation will have to be  developed. You will have to get ABAP support for this. They can either do it through user exit, or call transaction , and incorporate the same in the Action box of notification. (QQMA0001: User Subscreen for Notification Header, QQMA0014 Checks before saving notification )
    please let me know your apprehensions
    Regards
    gajesh

  • VBFA Table Update for Credit Note

    Hi ,
    I have created a rebate credit memo advice and a credit memo billing docment for final settlement. Now the document category that is displayed in VBAK and VBRK document respectively indicate that the documents created are credit memo documents but when i check in the document flow in Table VBFA, i observed that the document category indicated against the credit note order and Billing document is P and L respectively which is the document category for Debit Memo. Need to know how this document category changed in VBFA from Credit memo to debit memo category.Further need to know how the document category in VBFA table is updated.
    To provide more inputs,when i create a normal credit note advice to billing process,VBFA takes the document category of credit memo.
    Regards,
    VEE KAY

    HI,
    this is not possible.
    Tips:
    1. Create a reserve invoice with negative amount with items copying the original invoice rows inside with custom code. (this will not thouch the stock).
    or
    2. Create a non inventory managed item (service type)  - code: DE (Discount/Exemptions)
    then you can use it:
    2.1. Create the credit memo
    2.2. Copy lines via custom code, but the itemcode will be always your itemcode, and every other can be copied from Invoice.
    each cases there will no connection between your Original Invoice and Created Credit Memo/Reserve Invoice. You should have to use custom code to copy lines from original items.
    In payment you can use the numatcard field for matching the documents together (numatcard: Vendor/Customer reference number)
    Regards,
    J:

  • Generic Withholding tax for Credit note

    I try to generic Withholding tax for credit note but It's show message
    No data was found.
    I check the selection criteria so many time and I use variant from another document that it can generic wht before.I just change posting date and document No. for Credit note and it's still show no data was found.
    What's wrong and what should I do.
    please advice me.
    Thank you very much.
    Ataru

    Hi Wayne,
    We opened a note with SAP and were told that a US 1042s copy could not be used within the standard system.  Looking into it further we found that the form name was coded into a selection program.  We had an ABAP developer add code that allows us to use a "Z_"  copy form. 
    Regards,
    Gregg

  • Output type for credit note

    Hi Gurus
    Can any one explain me to configure the output type for credit note
    Explain with the steps 
    Thanks in advance
    Regards
    Ramesh

    Hi
    SPRO-IMG-Sales and Distribution-Basic Functions-Output Control-Output Determination-Output Determination Using the Condition Technique-->Maintain Output Determination for Billing Documents
    -Maintain Condition Tables -Maintain Output Types -Maintain Access Sequences -Assign Output Types To Partner Functions -Maintain Output Determination Procedure
    Hope this will work.
    Hari
    Edited by: hari mukku on Apr 15, 2009 4:27 PM

  • F.2A Interest on Overdue for credit notes

    Dear Friends
    how to calculate interest on credit notes to the customers,  whether interest calculate on credit note and give credit to customer a/c or adjust the credit note amout to original invoice and calculate interest on net amount
    for example.
    i am facing a scenario a customer invoice Rs.1000/- and credit note of this invoice 200 net amount due Rs.800/- cusomer paid 800 on 45th days. interest on cleared items should charges for Rs.800/- but system calculate interest for Rs.1000/-
    How to set config for credit notes whethere credit note adjust Rs.200 for invoice 1000/- or should give credit of interest for Rs.200/-
    Please advice me how to do this
    Thanks in advance
    Regards
    Santhanam K

    Sunitha,
    -  Setup for Customer Interest calculation is based on parameters entered in customer master in Company Code data, Account Management tab under Interest Calculation section
    -  You have to run interest calculation and posting transactions for interest to be actually posted to customer accounts
    Unfortunately, there is limited format change you can do on S_ALR_87012178. However,
    -  You can control what information is displayed in the report by selecting appropriate summation level from 0 (most information) to 6 (least information)
    -  The columns Itm Net Date refer to Document Line Item Number, and Net Date corresponding to the date when the Net payment is due. This report doesn't have capability to change column titles
    HTH,
    Manish Patel
    Sr. SAP Solutions Consultant

  • Drill down value not matching with Displayed Report Painter Issue-GR55

    Hi,
    Need your help for an issue in drill down value of report painter from actual cost coloumn.
    I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
    Could you suggest on this issue.
    Thank you for your cooperation.
    Regards,
    Rakesh

    The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

  • Credit Note issue against AR Down payment

    Hi,
    The business process is down payment and milestone billing. We have raised the FAZ for the down payment for 100 EUR and we have recieved the payment from customer and posted the same in F-29.
    1. We have to raise the credit memo against the down payment ( We need to cancel the cleared down payment). When issuing credit note against the credit memo, the following message appears:
    No account is specified in item 0000001001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000001001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000001001" of the FI/CO document.
    2. If we try to create the final invoice then the down payment recieved line item also will be flown. And if try to issue the credit note agaisnt the Billing document also the same issue.
    Normally the Down payment is noted item and we are doing manual posting of incoming payment in FI. And the same we are clearing. And we need to issue the Credit note. And there is no account determination for the down payment line item.
    Please advise.
    Thanks
    Sreekantha

    Hi ,
    We have done the document reverse and reset in FBRA.or normal item cancel in FB08.
    Business want to issue Debit Note with reference to the Down payment invoice(FAZ). While doing the same I am facing the account determination issue, as the down payment is with only noted item.
    Hope my issue is understood correctly.
      Debit Note issue with reference to Down payment line item
    Case 1: Business has created only Down payment request and received down payment incoming payment against FAZ. Further milestone related billing is not yet done.
    Step 1. Create Order with down payment and billing plan
    Step 2. Create Invoice with FAZ
    Accounting entries: only one line item with noted item A down payment request.
      Step 3. Post incoming payment
      F-29 done
    Step 4. Reversal of Incoming payment
      F-39 Clear down payments or
    Down payment document reverse and reset in FBRA.
    or FB08.
      Step 5. Issue debit memo (DR)against the FAZ
      Create Debit memo request and debit memo
    Error: Document XXXXXXX saved (no
    accounting document generated)
    Message no. VF050
    When tried to release the document to accounting, the following error.
    No account is specified in item 0000001001
    Message no. F5670
    Diagnosis
    No account was specified for account type
    "S" in item "0000001001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot
    process the document.
    Procedure
    A system error has probably occurred in
    the application you called up. Check the data transferred to item
    "0000001001" of the FI/CO document.
    There is no account determination for the Down
    payment line item(as it was noted item and the payment is entered in FI ).
    Can this be over come by issuing the Debit note from FI with reference to Down payment Invoice FAZ ?.
    Case 2: Business has created Down payment request and received down payment incoming payment against FAZ .Mile stone related billing is also done which will have Milestone billing line item  and Down payment line item.
    Step 1.  Create Sales order
    Step 2. Create Down payment request
    Step 3. Post incoming payment
      F-29 done
      Step 4. Create the next mile stone related billing.
    Invoice XXXXXXXX with Down payment cleared line item and invoicing line item
    Step 5. Raise debit note with reference to Milestone relating line items
    Only line item with invoicing line needs to be selected while raising Debit memo request:
    Step 6. Create billing document
    Note:  For the down payment line item, we need to follow the process of Case 1(Can this be over come by issuing the Debit note from FI with reference to Down payment Invoice FAZ ?) by issuing FI Debit note.
    Thanks
    Sreekantha

  • AppStore asking for Credit Card information and I don't see "None" option to continue without providing credit/debit card details

    Hi,
    AppStore and iTunes on my MacBook Pro (OS X - 10.8.5) are asking for Credit Card information and I don't see "None" option to continue without providing credit/debit card details
    I tried changing country etc. but stll I can not proceed without credit card. Please help..........!! Thanks in advance.
    Regards,
    Akshay

    The post here by "TehYoyo" helped:
    https://discussions.apple.com/thread/4725517
    I had to create new apple ID as mentioned there and then the stupid "None" option showed up.  Don't understand why this though!
    Cheers,
    Akshay

  • I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

    I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

    Hi again, I am on an iMac using OSX 10.7.5, I"ve taken screenshots to show you I think my settings are correct

  • How to reset the value of drill down - Chart

    Hi gurus. I have a problem related with drilldown.
    is there any way I can reset the drill down value?,of course, except for using reset button
    (in  this case "reset" means "make the cell blank of certain value")
    I tried using "push button" and the cell is reset.
    However, even though the cell is reset, the cell is set to the drill down value in one second.
    ex. Drill down destination : a --> "" --> a
    (a is drill down value)
    Is there a way to reset the drilldown value?
    Thanks in advance.

    Thanks for your help , Sonja
    I used push button but it can not refresh(reset) drill down cell
    because the destination cell of the chart remains drill down value
    I tried like below way
    a : drill down value
    Goal : make drill down cell turn to blank after i used drill down once.
    1ST.
    when i click the chart and use drii down, a is entered into drill down cell
    2ND
    by using "push button", i tried to reset drill down cell
    but unfortunately it does not work.
    Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
    drill down cell changes like this
    1 ->   2   ->  3
    a -> blank ->  a
    i have to eliminate (2->3) phase or find another way to refresh drill down cell.
    Regards
    Kwon

  • Display Report Level Filter value and Input Controls Value

    Hi,
    Please let me know how to display Report Level Filter value and Input COntrol values in the report.
    I have 2 tabs in the WebI Report. The first tab has the summary details about the other tabs like reprot desc, prompt values, reprot filter values,etc.
    In the 2nd tab I have the actual report which has input controls defined, prompt values and global level report filters.
    Can anyone please tell me how to display the Report level filter values and the Input Control values in the first tab report.
    For ex: Tab 2 has a Report level filter: Region = NA
    I need to display in Tab 1 in as Region: NA
    I used the function ReportFilterSummary but that is giving me other details, I want only the object name and the value.
    Also how to dispaly the Input Control values in the tab 1.
    Please let me know if you have any suggestions for this issue.
    Thanks

    did you try
    =ReportFilter([Year])
    if you are making report filter over the year, it will return the value of the filter
    by the way, the filter should be applied over all the report not to a specific block to be able to get the correct value
    the Input control also considered as report filter, only if you're applying them on the level of the report, if you applying an input contron over a specific block or chart, you will not get the values for ReportFilter
    good luck

  • How to retrieve the procedure value and pass the value to a form field

    How to retrieve the procedure value and pass the value to a form field?

    Set property for the field and the value is the actual procedure/function.
    Cheers

  • Passing drill down value to prompt

    Hello ,
    I have an requirement like i have 2 reports one is parent report and child report, i need to pass the drill down value from the parent report to the prompt in the child report. i.e let us say i have customer name in parent report and when i drilled from customer name to the child report, in the child report the prompt sholud display the related customer id's based on the customer name on which we drilled from parent report.
    Thanks for any help in advance.

    Hi Venkatesh,
    If I understood correctly this is what you want,
    When you click the customer name in report A it will take you to report B with the corresponding customer Id in the prompt value.
    You can use GO Url for this,
    In the customername column write the Go Url, change the column properties to html.
    sample go url,
    '<a href=saw.dll?Dashboard&PortalPath=/users/administrator/_portal&Page=page2&Action=Navigate&col1=
    "Customers"."Customer%20Id"&val1='||"Customers"."Customer Id"||'>'|| "Customers"."Customer Name"||
    '</a>'
    So when user clicks on the customer name , the corresponding customer Id will passed to the report B and prompt value on report b will change accordingly.
    Make sure in Report B customer Id column is prompted.
    Thanks,
    Vino
    Edited by: Vinodh NK on Jun 9, 2010 5:38 AM
    Edited by: Vinodh NK on Jun 9, 2010 5:39 AM
    Edited by: Vinodh NK on Jun 9, 2010 5:39 AM

Maybe you are looking for