Iphoto 11 is not recognizing jpeg files downloaded from camera and card reader. Nor will it allow me to transfer from image capture

iphoto 11 is not recognizing jpeg files from either the camera and card reader. Canon Eos rebel dig. Nor will it allow me to transfer images from image capture to iphoto. No problem downloading to image capture.

Sounds like a damaged card.  Get your photos off the card with Image Capture and then reformat the card in the camera.  Take some pictures and see if the card is recognized by iPhoto and the card reader.
OT

Similar Messages

  • Import fails from camera and card reader

    I am unable to get Aperture 2.1.2 to import from either my camera or a CF card reader. I have a Canon 400d (Rebel XTi), shoot RAW only, and have used it for a while in Aperture without any problems, but suddenly it refuses to import.
    Aperture 'sees' the camera, opens the import pane automatically, but once the import process starts, nothing happens. The little spinning import indicator just spins...no images download. This behavior is the same for either the camera or card reader. And it happens with different cards.
    The only way I can import images is to drag them from the card in the Finder, and then drag them from the Finder into Aperture.
    Message was edited by: Ed Roppo

    I had this problem after the raw update 2.2 with images from my 1d-mkii. After the 2.3 update things went back to normal. There's something not entirely right with the current raw version from apple. My hunch is it's all going to be ok after the 10.5.6 update, which shouldn't be long.
    j

  • I have Photoshop CS5 and am trying to download the Camera Raw plug in which will enable me to look at RAW images from a Nikon D800 . The download appears in my " Downloads " folder but when I try to open a RAW image I get a message up which says it can't

    I have Photoshop CS5 and am trying to download the Camera Raw Plug in that will allow me to open images taken with a D800 camera .
    It appears the download has been successful when I look in my " Downloads " Folder but I still get a message up saying the installed version of Camera RAW won't support the Camera model ( i.e. D800 ) . What am I missing ??
    Tony Fletcher

    You need to download and install Camera Raw 6.7.1 for CS5. Once you have downloaded it, you need to install it while CS5 is closed.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Once downloaded, unzip/unpack the file, and run the executable to start the update, following the instructions.

  • How do I stop organizer to automatic import everything from camera and card readers?

    I want myself to decide what and when something shall be added to organizer.

    Hi,
    You don't say which version of elements you are using or which operating system you are running so I'll give some general answers.
    Go to Edit -> Preferences -> Camera or Card Reader and change the Download Option to Advanced.
    Now when you get images from the card, it will display a preview of each image and you select/de-select each one before telling it to download the selected ones.
    If you can't turn on the advanced dialog, your screen depth in pixels may be too small.
    If you don't want the downloader to be started when you insert the card then the operating system needs a tweak.
    The other thing to look at is watched folders, you may want to turn the facility off.
    Brian

  • Direct from camera or Card Reader?

    Aloha all, a few questions because I'm stumped, and have searched the Canon site with no luck, so I thought I'd ask people who have real world knowledge. Here's the problem. Suddenly every program that I attempt to up-load my shots with, can not see the pictures on the camera (20d). They do recognize the camera, and it mounts fine, but it shows up with 0 photos for import. Each one says no photos to up-load, however when I view them on the camera they are there, and when I use a card reader they show up, and up-load/import fine. Any idea why they suddenly can't be seen when the camera is connected directly? More importantly for me, is there a fix you know of that doesn't involve sending the camera in for repairs?
    The Applications I use, and won't show/import the shots directly from the 20d are 1. Aperture, 2. Photoshop CS, 3. iPhoto, 4. Digital Photo Professional
    Part two, please bare with me.
    Does/has anyone used the Sandisk Extreme USB 2.0 Reader? I'm looking for a new card reader and like this one. I don't really need/want a reader that reads 12 - 15 different cards, just a CF and maybe a memory stick. Is the USB 2 ok speed wise? (I shoot mainly RAW). Or would you recommend going FW?
    Mahalo in advance for any suggestions, tips, or advice. JB

    Importing directly from the camera is often problematic. It mounts using a TWAIN driver, and this always seems flaky.
    Importing via a card reader mounts the device like a drive, and I have never had problems with this approach. It's almost always faster as well. The only downside is you can't do "tethered" shooting (basically live off the camera).
    Anyway, is the Sandisk Extreme 2.0 reader the $90 jobbie? I believe I recall reading a review on Luminous Landscape that noted its speed is only realized if you use their Extreme 4 series of cards -- otherwise it's not all that much faster than a normal reader. I would expect most USB 2.0 or Firewire 400 readers would be fine -- personally I use a Lexus Firewire 400 reader and it has been excellent. The "right" Sandisk combo is faster, but it depends on whether you need that speed for import. It's nice, but often not a "have to have."

  • TS1315 when trying to download photos  from my digital cameras I keep getting the message that pics can't be downloaded because of an unrecognizable format. It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic.

    when trying to download photos  from my digital cameras I keep getting the message that pics can't be downloaded because of an "unrecognizable format". It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic. I have had these cameras for a few years and have never had a problem downloading.

    I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
    However today I tried to download six photos.
    None would download including several others for a total of 21 that would not download.
    Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
    However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
    (1) Put a fresh battery in the camera - same results
    (1.5) Used a different port in the new hub - same results
    (2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
    (3) Tried again using the cable - still same error
    (4) Changed cables - my husband has the same camera - still same error
    (4) Put the card in his camera with his cable - still same error
    (5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
    (6) Moved the offending one image to the Trash while the card was in the card reader
    (7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
    Conclusion:
    Not the camera
    Not the cable
    Not the hub
    Must remove bad photo from the card
    However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
    Any idea why this is happening now?
    Thank you

  • Lightroom 4.4 not recognizing RAW files from supported cameras

    I started to get problems with Lightroom not recognizing RAW files from my Fuji XE-1 and Canon 5D Mark 3 cameras but I thought it was a problem with RC. After downloading some files today in 4.4 without a problem I encountered the same error message (unable to inport listed RAW files) again. The files open fine in Bridge. Any idea what is causing this problem?

    Hi Geoff
    I use a Mac with the latest version of Mountain Lion OS. The image files are being imported from the cards; in the case of the Fuji an SD card inserted in the card reader slot on the Mac and in the case of the Canon a CF flash card in a card reader attached to the Mac.
    Appreciate any help you can provide.

  • PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

    PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

    Do you seriously think we can answer that with zero information from you?
    Please give us:
    Operating System/version
    Photoshop version number
    Amount of RAM installed
    Hard drive(s) free capacity
    Video card make and model
    Camera make and model
    Then describe what you have done so far and the symptoms you are seeing.

  • I just purchased photos from shutterstock and they said it will download as .eps file. They said I would need vector editor such as adobe illustrator to convert the image to a jpeg. Could anyone advise me how to do this? This is all very foreign to me. Th

    I just purchased photos from shutterstock and they said it will download as a .eps file.They said I would need vector editor such as adobe illustrator to convert the image to a jpeg. Could anyone advise me on how to do this? This is all very foreign to me.
    The Swanky Lady

    File>Open to open your eps file
    File>Export to export your image as a jpg.
    In the export dialog box just below where you type in the filename is a file type, that is where you choose jpg.
    What ever you do, do not delete the eps file. Should you ever need to access the original you will have have.
    I recommend that instead of jpg you choose psd, tiff, or png and use jpg only for sharing. Jpg is a lossy format meaning each time you edit the file and save it, the quality of that file degrades. The formats I recommend are lossless formats, you can edit them all you want no data is being discarded unless you choose to do so.

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site, but still no joy.  Any suggestions?

    I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site and installed them, but still no joy.  Any suggestions?

    aspaceman,
    Perhaps I owe you an apology.   Having re-read that downloading from HP was unsuccessful I feel uncomfortable.  Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
    Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.  

  • Can not open JPEG files and can not create JPEG files from other software

    Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
    When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
    checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
    From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
    is created (I can see its name in the directory I created it).
    I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
    I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
    I will appreciate your assistance.
    Avi T. 2014

    Hi,
    Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
    I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    Karen Hu
    TechNet Community Support

  • IPhoto does NOT import " .pictClipping " files ?

    Hi,
    I copied pictures of artists from Amazon on the Web and put them together with the songs in iTunes Artwork. So far so good.
    I wanted to import these pics in iPhoto. I dragged them on the desktop en tried to import them via iPhoto 'Add to library'.
    Didn't work. iPhoto does NOT import " .pictClipping " files.
    What did I do wrong ? What can I do ?
    How can I get these pics in iPhoto ?
    Thanks for some light in my darkness...
    John
    Macmini G4   Mac OS X (10.4.3)   Maxtor 300 Gb HD
    Macmini G4   Mac OS X (10.4.3)   Maxtor 300 Gb HD

    Hi JOhn,
    Dragging the album cover out of iTunes either by the album art window or by the "get info" window will just give you a clipping file that cannot be opened by a graphic program. It is just a clipping that Finder will open.
    Did you download the images from Amazon and save them to your hard drive, or did you copy/paste them from Amazon to iTunes song "get info" window?
    If you just did a copy.paste, then I suggest you go back to Amazon and download the images to your hard drive. then import into iPhoto. There might be some third party programs that will download the art while your songs are playing on iTunes to make it easier for you. they usually put them on a folder on your hard drive somewhere.
    there's even an Applescript program to export your artwork from iTunes and copy it to an image file at a specified location.
    http://www.versiontracker.com/dyn/moreinfo/macosx/19567
    There are all kinds of ways of doing this so search around Version Tracker for "itunes album art" for other programs to make it easier for you.
    Lori

  • My iphoto is not recognizing my sd card

    I have a macBook Pro and I have been downloading my pictures directly from my SD card to my computer for about 2 years now. For the past few weeks I have been trying to download my pictures and the computer is not recognizing that I am inserting my sd card at all. The iphoto icon usually opens up on its own once the card has been put in, but now nothing. I've opened iphoto then tried to put he card in, but still nothing. I don't see the card anywhere on the computer at all. Any ideas?

    Does it mount to the finder? Does Image capture see it?
    What you need to do is find a way to get th ephoto soff and then use your camera's format command to reformat the SD card
    In the future a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    LN

  • I'm trying to send a jpeg file as an attachment and not embeded in the body of email

    How do I send a jpeg file as an attachment and not embeded in the body of the email.

    In addition to what etresoft says...
    if you prefer not to see the contents of your attachments embedded in your email...
    Open Terminal in Applications>Utilities and paste this in. Then hit return.
    defaults write com.apple.mail DisableInlineAttachmentViewing 1
    To reverse the setting, change the 1 to a 0.

Maybe you are looking for