IPhoto 11 Version 9.2.1 Places does not work. Says I am not connected to the internet when I am!

Wanted to see if anyone could help with this issue I am having. Did a few searches but most of the problems I found related to older versions of iPhoto. When I click on Places it says that I am not connected to the internet when I clearly am connected. Anyone heard of this or have a solution? Thank you!

I'm afraid I don't have much to add other than to say this is happening to me too.  However, it is not consistent.  Sometimes I get iPhoto Places to connect and show location, and other times (on the same photo with gps tag) it will say not connnected.  I too saw the earlier reports of this problem, and also that it was fixed in v8.0.1 of iPhoto. 
Currently running iPhoto v9.2.1, and connecting via wifi.

Similar Messages

  • My airport does not connect to the internet when i turn on my macbook...i have to reconnect it again . please help?

    my macbook worked fine till yesterday but today it doesnt seem to connect to the wi-fi on its on ... i have to turn the airport off and on again till it connects . my internet is fine cos my iphone seems to catch the signals just fine ... please help ?

    Hey there shriya bhardwaj!
    I have an article for you that will help you troubleshoot this Wi-Fi issue on your computer:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
    If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
    More troubleshooting can be found here:
    iOS: Troubleshooting Wi-Fi networks and connections

  • HT201210 why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?

    why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?

    no into my labtop i have internet but for some reason when i plug my iphone into it it saids update servers could not connect to the internet please check to make sure u have internet and i do.

  • Why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet?

    why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet? i need to update my ipod i even changed the LAN settings and it stilll doesnt work

    Have you seen this article?
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    B-rock

  • My windows 7 does not connect to the internet

    my macbook pro does not connect to the internet wired or wireless

    Have you installed the Apple Windows Support files you downloaded when using Boot Camp Assistant?

  • HT1695 My Ipod 4th Generation does not connect to the internet!!1 Can sum1 help me

    My Ipod 4th Gen Has recently had its screen repaired after i dropped it.
    I have the ipod fixed and have only had it for 2 days and the ipod does not connect to the internet.
    It only connect when im right next to the router.
    Does any one know whats wrong with it?

    Likely a problem with a connection to the internal antenna.
    http://www.ifixit.com/Guide/Installing+iPod+Touch+4th+Generation+Wi-Fi+Antenna/3 640/1

  • I just downloaded find my iphone.  Why does it keep saying I am not connected to the internet when I know i am?

    I am trying to get my "Find my Iphone" app to work and after I sign in with my apple id and password, it keeps telling me Im not connected to the internet.  I click "try again" and it does nothing.   I double checked that I am connected to my local wi-fi and not sure what else to do.   Help!!

    Yes...i have tried that and it sure does connect to all the websites. 

  • Why does the "find my iphone" ap say i'm not connected to the internet when i clearly am?

    I can see web pages, update facebook status, tweet, etc. but this ap says i'm not connected to the internet (wifi and Verizon LTE).  Also, why does the podcast ap say its unable to authorize to automatically update my podcasts (which automatically download to my mac book pro every day without a problem)?

    Go here:
    Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
    and confirm that it's set to the correct country for your account. If it is, try signing out of your account and back in.
    Hope this helps.

  • Why does iTunes say it is not connected to the internet when the connection is active?

    No problems running iTunes on Windows XP machine with Norton Internet Security.
    Moved to new computer with Windows 7 - still running Norton Internet Security.  iTunes does not start when iPhone4 is connected with USB cable.  Worse problem is that all internet activity (check for updates, activate this computer, etc.) is halted with message that computer is not connected to the internet... but it is.  All browser and email activity works right.
    Do I have a Windows 7 setting problem, a Norton Internet Security setting problem, an iTunes setting problem?
    Thanks in advance.

    For the device connectivey issues try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    I suspect Norton's firewall is blocking iTunes. I can't tell you offhand where to look to tweak things.
    tt2

  • Hello my iPhone 4 does not connect to the internet anymore(wlan still works) but it still shows the 3G symbol. I have that problem since ios 5.1

    Ich still shows the 3G symbol but I cant connect to the internet anymore. Since ios 5.1 it disconnected every 30 minutes untill i restarted. De- and reactivating the mobile internet  never helped. Now i dont get a connection. It quite not works.
    I never had problems untill ios 5.1
    of course apn,  username and passwort for the carrier are correct.
    My carrier is simyo
    (im in germany)
    Thank you for helping me

    Hi Damien,
      Thanks for your reply.
      I had not created 2 separated wireless network. The airport extreme has had create wireless allowing it to be extended and the airport express has had it to extend since day 1.
      The only device that does not connect to the airport express when it is far from the airport extreme here is the iPhone 4. I've tested 2 Windows based computers, 2 Macs, 1 Samsung TV and 1 Android phone and they all are able to connect to the airport express when the signal from the airport extreme is weak (please take a look on the screen shots on the original post).
      The screenshots of the 2 devices' wireless set up can be found below:
       Airport Extreme
      Airport Express
        I have seen other people here on the Apple discussions complaining about the same issue with their iPhone 4 and iPad: would it be a iOs problem?
    Regards
    Gilson

  • I downloaded an update and now Firefox does not connect to the Internet. Having downloaded it again and again without avail, what do I do?

    Firefox has gone haywire and won't connect to the Internet. I was prompted to install one of your updates and I did. Afterwards, it would no longer connect. I uninstalled and reinstalled it several times, but still I cannot connect to the Internet. My OS is Windows 7

    After a Firefox upgrade/update, your firewall may not recognize that new version and will not allow access to the internet; that is your firewall doing its job. You may need to
    #close Firefox (Firefox button > Exit or File > Exit)
    #remove permissions for Firefox from your firewall's programs list
    #restart Firefox
    #allow your firewall to detect the new version and give the permissions needed by your firewall for Firefox to access the internet.
    See --> [http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox Cannot connect after upgrading Firefox]<br />
    See --> [https://support.mozilla.com/en-US/kb/Firewalls#w_configuring-firewalls Firewalls-Configuring firewalls]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Firefox does not connect to the internet on this computer, though it does on another computer and though Internet Explorer also connects without any obvious problem.

    About 1 year ago I helped to set up Firefox on my mother's computer. It worked fine until a couple of days ago. Now it no longer connects to the internet. The system is Windows XP, service pack 3. Internet Exporer does connect to the Internet on this computer. Also, I have another computer with Firefox and it works with no problem wirelessly. We tried removing Firefox and then reloading it and that did not help. We get no error messages. The internet and Firefox simply don't seem to see each other.

    Sounds like a Firewall problem, seems to affect
    Firefox more than other browsers.
    *Firewalls - MozillaZine Knowledge Base
    *:http://kb.mozillazine.org/Firewalls

  • My linksys WI-FI Router EA2700 does not connect to the internet?

    I connected my wireless router to my "speed touch" wireless modem" using the cisco setup cd, and in the first attempt i could access the router and teh internet. When i tried accessing the internet later in the evening, i was unable to connect. I tried different settings and even reset the device several times but it kept telling me that my ISP username and password was incorrect. I am sure that the username and password are correct but the device seems to think otherwise even thou it did connect the first time.
    Would be grateful if anyone can help. 

    For wireless connectivity issues; try to optimize the router’s wireless settings through the following:
    Use a wifi analyzer like http://www.metageek.net/products/inssider/ to select a non-overlapping channel that can be assigned to the router
    Relocate the router to a central location
    Place the router on an elevated surface for better wireless coverage
    Avoid placing the router on a metallic or glass surface to avoid wireless interference
    Try to follow the following:
    Connect your computer to the modem;
    Check the modem’s ip address;
    If you are getting a public ip address and you need to enter a username and password in order to get online, then set the router’s internet connection type to PPPoE;
    If you are getting a private ip address, then set the router’s internet connection type to DHCP

  • Iphoto library on external hard drive now does not show all the photos when i access it from macbook

    i backed up iphoto library to an external hard drive.  Deleted photo library on the macbook.  After transferring some new photos to macbook from a camera, when i access the iphoto library on external hard drive only the new photos show up.  Originals are still in files, but don't appear when opening iphoto library on external hard drive.

    Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

Maybe you are looking for