IPM Action module ( c# ) or IPM SDK samples help

Could anybody guide me on where to find samples or send me the samples, which I read in Install document of OIPM V 7.7.1.0 ?
Content goes like this
" *Building and Running Action Module Samples*
The Sample Action Modules are not installed by the SDK installation program. They are included in the AddOn\Samples\SDK Samples\Sample Action Modules directory.
The samples contained in the Sample Action Modules directory are shown in the following table.
Name     Type     Description
Database Lookup Action     C# Action Module     Demonstrates how to perform a database lookup from a "
Pl help.

I created sample on my own.

Similar Messages

  • Illustrator SDK sample: Windows plug-in error when exporting to EMF

    Hi All,
    I'm trying to create a plug-in that exports a whole AI document or just a selected portion of it to an EMF file.
    I've used classes from [SnippetRunner] SDK sample, i.e. from \Code Snippets folder, and I've encountered a very strange behavior when calling
    SnpDocumentActionHelper::ExportDocument(ActionDialogStatus dialogStatus, AIActionParamValueRef parameters)
    with formats such as WMF, EMF etc.
    If function sAIActionManager->PlayActionEvent() is called with 'kDialogOff' status an error message "The plugin cannot complete because of an unknown error" appears, although the export is completed and the return code is 'kNoErr'.
    If I try exporting with a dialog interface (omit parameters or 'kDialogOn') everything is fine.
    I checked it both for CS3 and CS4 SDK, as well as for WinXp and WinVista.
    I also tested with the actual sample plug-in (SnippetRunner), same behavior.
    Is this an SDK bug? Any ideas?

    I don't have a lot of experience with this kind of problem, but the first thing I'd check is the parameter block you're passing the action call. I don't know why it would matter if the dialog appeared or not, unless the export settings block wasn't being filled in with everything it needs?
    You might try recording an export you perform manually via the action palette, and then saving it to a file. You can open it up manually and compare it (even if it's a binary block) to what you're doing in code. You might spot something that way.
    I don't know what else to suggest though. It's unlikely to be an SDK bug, though it could be a bug in the action-aware part of the exporter.

  • AcrobatActiveXVB SDK Sample - Links in PDF Not working

    Hi,
    I am trying to create an application in VS.net (similar to AcrobatActiveXVB SDK Sample) to display PDF files in my application.  PDF file opens fine.  But external links in PDF file are not working.  I trying to display a main index pdf file, which contains external links to 10 other PDF files.  All 10 PDF files are located in my local hard drive (main index pdf file is also located in the same folder).  If I open the main index file in Acrobat Reader then it the links are working fine.  It is not working only when it is opened inside the AcrobatActiveXVB SDK Sample.  Please help.
    Please Note: Links are not grayed.  I get the hand mouse pointer, when I mouse over to the links.
    Windows OS - XP SP3
    Acrobat Reader - Tried it with 9.1.3 & 9.3.3.  Un-installed and re-installed multiple times
    Thanks in advance.
    Rajaram

    hello, the pdf viewer is still somewhat experimental and under very active development - you could try if the same error is occurring in the current development version, which you can download as an addon from http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi
    in case it has the the same rendering problems, you could then file a bug report at https://github.com/mozilla/pdf.js/issues (a github account is necessary for it though) - please also provide a sample document where the error is apparent!

  • Where do i get OEG SDK sample ?

    Hi All,
    I have installed OEG latest version and going through OEG tutorial. But don't see SDK samples in its installation as mentioned in the tutorial [http://docs.oracle.com/cd/E21455_01/common/tutorials/general_filter.html#build_classes]
    I have a requirement to write some custom filter.
    Any idea on where do i get these SDK samples ?
    Thanks
    -- Shyam

    Post Author: amr_foci
    CA Forum: .NET
    check you business Objects installation path, you will find the SDK files there for java
    C:\Program Files\Business Objects\common\3.5\java\lib

  • SDK Samples in HIS 2013

    After installing Host Integration Server 2013, I do not see any of the SDK Sample directories on the file system.
    Did I miss something in the install or are these samples not part of the install media anymore???
    Thanks,
    Gary Clanton

    HIS 2013 is available as a supplemental license to BizTalk 2013. This means that you have to license one of the BizTalk Server 2013 Editions to get a license for HIS 2013. You don't need to install and use BizTalk Server in order to use HIS. You only need
    to install BizTalk Server if you need to use one of the BizTalk Adapters that is included with HIS.
    You didn't indicate what type of applications that you will be communicating with on the IBM mainframe. If you will be communicating with CICS or IMS transactions on the mainframe, then you'd likely want to take a look at the Transaction Integrator (TI)
    feature in HIS 2013. You can use TI with a WCF service. See
    http://msdn.microsoft.com/en-us/library/dn150066(v=bts.80).aspx#application for an overview of the Application Integration feature of HIS 2013. You might also want to look through the following topic:
    http://msdn.microsoft.com/en-us/library/dn149782(v=bts.80).aspx
    The HIS 2013 SDK does include sample applications. When the SDK is installed, it gets installed to the following folder:
    C:\Program Files\Microsoft Host Integration Server 2013 SDK v1.0
    Under this folder, you will see the following folders:
    - ApplicationIntegration
    - BizTalkAdapters
    - DataIntegration
    - MessageIntegration
    - NetworkIntegration
    - SessionIntegration
    Under each of these folders are samples specific to those features. For example, under ApplicationIntegration there are two additional folders: HostInitiated and WindowsInitiated. The WindowsInitiated folder includes samples for Transaction Integrator where
    TI initiates transactions by calling application on the IBM host system. Under WindowsInitiated, you will find a WcfService folder that has a TI WCF sample application. You'd also want to look at the ApplicationIntegrationStarterGuide sample because it describes
    many of the new TI features in HIS 2013.
    If TI doesn't fit the needs, then you need to look at the other HIS features to see what might work for the IBM integration scenario that you are working on.
    You might also want to look at
    http://msdn.microsoft.com/en-us/biztalk/hh441721 as this site has many links to HIS specific resources.
    Thanks...
    Stephen Jackson - MSFT

  • BO edge 3.1 howto Report Engine SDK sample

    Hello,
    I'm trying to install any report engine SDK sample on a BO Edge 3.1 installation.
    The webserver is WACS (Web Application Container Server).
    I don't know how to set up a web application that uses the SDK, and I cannot find any useful documentation.
    Has anyone done this?

    Hello,
    Crystal and Xcelsius are client tools so you don't need to install them on the server.
    It might be useful to install them on it when you are troubleshooting issues which might be related to network (firewall, load balancer,...) but otherwise you can keep them on the clients machine.
    The client machines connect to the server by specifying the server details (CMS name and valid user account) when you try to export the reports to the repository.
    Regards,
    Philippe

  • Adobe Acrobat XI SDK Samples problem

    I am having problems building and running SDK samples.
    When built “out of the box”, the WebLinkDemo fails while getting HFT for AcroColor.
    After some googling, I found Adobe Acrobat XI SDK Release Notes:
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/release- notes-acrobatxisdk.PDF
    Following their directions:
    deleted
    /D PI_ACROCOLOR_VERSION=0x00060000
    inserted
    /D READER_PLUGIN
    WebLinkDemo builds OK, but required SnippetRunner fails to compile with multiple errors like:
    >c:\code\adobe\acrobat xi sdk\samples\snippetrunner\sources\snippets\shared\acetranspdetextcolorsnip.cpp(60): error C2065: 'PDEContentGetNumElemsSELPROTO' : undeclared identifier
    SELPROTO seems to be the commot suffix.
    Any suggestions?
    Thank you!

    Perhaps a little more context. You should understand that the Acrobat SDK is a tool for encouraging people to buy Acrobat - especially the consumers of plug-ins.
    Reader plug-ins can be made, subject to technical limitations, but Adobe do not especially like the lost sales of Acrobat this may represent.
    In addition to purchasing Acrobat, you will need to buy a Reader integration key, after negotatiation. Approval is not automatic!  There are also two scales of fees, one for regular Reader plug-ins and one for security related plug-ins, for which Adobe has a much higher fee and demands much more oversight.
    "How much does a Reader Integration key cost?
    Reader Integration keys are only available to strategic partners based on a negotiated price. If you are developing a digital rights management (DRM) Adobe Reader plug-in, the standard (non-DRM) RIKLA contract does not apply. Adobe does offer a DRM agreement specifically for developers building such Adobe Reader plug-ins. The current fee structure for the DRM RIKLA includes a $50,000 annual fee and a 5.5% revenue royalty."
    http://www.adobe.com/devnet/reader/ikla.html
    So, yes, to experiment with plug-ins, whether for Acrobat or eventually for Reader, please listen to what we are telling you and if you want to do this, buy Acrobat.

  • Illustrator CC 2014.1 sdk sample not loadable

    Hi all,
    I have build one of the SDK sample plug-ins and moved into the plug-ins folder. Illustrator tells me the plug-in is not loadable.
    I used the MSVC 2012 IDE; the only change I made was the include inside the resource file: instead of including afxres.h I include windows.h.
    DependencyWalker says that 3 DLL's are missing (API_MS_WIN_CORE-KERNEL32...), but this is tha same like for the CS5 plug-in, and CS5 loads it.
    Has anyone build a sample plug-in and load it in CC 2014.1?
    Thanks, kb_alfa

    Default setting for samples was Win32; changing to x86 solved the problem.

  • Data Source - Alias Not Found in SDK Sample Application VIDS

    Hi,
    I am trying to run SDK sample application VIDS.
    In the function, BindDataToForm, I am getting error at line:
    oColumn = oColumns.Item("CardCode")
    oColumn.DataBind.SetBound(True, "@VIDS", "U_CARDCODE")
    The error is: Data Source - Alias Not Found
    I have checked that the user tables and the fields in the user tables are correct.
    What can be the issue?
    Thanks.

    Hi Rajesh,
    Works just fine for me.
    Double check that you've created the userfields. You must press the button create user fields before attempting to use the sample.
    Best regards,
    Pedro Magueija

  • Not able to use Visual studio 2010 editor intelligence while running SDK sample code ?

    whenevr i start sdk sample project in visual studio i can build it ,debug it ,run it but the problem is that VS 2010 editor showing lots of red lines under many lines of code which on Mouse hover show some kind of error(mostly _____ is undefined) moreover i am not able to use intelligence feature of VS editor and i have to check reference of SDK everey time .what is the solution to this problem .

    1. Create environment variable INDESIGN_SDK_DIR with path to root folder of your SDK
    e.x  INDESIGN_SDK_DIR = "C:\SDK\InDesignCS6SDK"
    2. In your project add this to project settings:
    "VSProject"->"Proporties"->"Configuration Proporties"->"VC++ Directories"->"Executable Directories" add:
    $(INDESIGN_SDK_DIR)\devtools\bin
    "VSProject"->"Proporties"->"Configuration Proporties"->"C++"->"General"->"Additional Include Directories" add:
    $(INDESIGN_SDK_DIR)\source\precomp\msvc;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\xmedia;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\preflight;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\ui;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\tables;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\text;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\graphics;
    $(INDESIGN_SDK_DIR)\source\public\libs\widgetbin\includes;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\workgroup;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\interactive;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\interactive\ui;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\colormgmt;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\utils;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\incopy;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\layout;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\architecture;
    $(INDESIGN_SDK_DIR)\source\public\interfaces\cjk;
    $(INDESIGN_SDK_DIR)\source\precomp\common;
    $(INDESIGN_SDK_DIR)\source\public\includes;
    $(INDESIGN_SDK_DIR)\source\public\libs\publiclib\plugins;
    $(INDESIGN_SDK_DIR)\source\public\libs\publiclib\files;
    $(INDESIGN_SDK_DIR)\source\public\libs\publiclib\objectmodel;
    $(INDESIGN_SDK_DIR)\external\asl\boost_libraries;
    $(INDESIGN_SDK_DIR)\source\sdksamples\common;
    $(INDESIGN_SDK_DIR)\external\afl\includes
    "VSProject"->"Proporties"->"Configuration Proporties"->"Linker"->"General"->"Additional Library Directories" add:
    $(INDESIGN_SDK_DIR)\build\win\objr;
    $(INDESIGN_SDK_DIR)\external\afl\libs\win\release;
    $(INDESIGN_SDK_DIR)\external\icu\libs\win\release
    "VSProject"->"Proporties"->"Configuration Proporties"->"Linker"->"Input"->"Additional Dependencies" add:
    PMRuntime.lib;
    Public.lib;
    WidgetBin.lib;
    AFL.lib;

  • Runtime problems with sdk sample.

    Hi,
    has anyone had any problems when running the sdk sample (instantclient 10.1.0.4)
    compiled with MS Visual C++ Express version? I called make.bat and everything
    compiled and linked without any worries. When I run the program it crashed. While
    debugging I got the following info:
    First-chance exception at 0x7c81eb33 in occi.exe: Microsoft C++ exception: oracle::occi::SQLException at memory location 0x0012fb74..
    Unhandled exception at 0x7c81eb33 in occi.exe: Microsoft C++ exception: oracle::occi::SQLException at memory location 0x0012fb74..
    This error occurs when trying to call ::createEnvironment().

    I gave up with the occidml example and restarted with
    the occiobj example. And guess what happened. It
    worked. I can´t beleive it.
    So I really don´t know what the difference of these
    two example is as the only difference so far (as I
    saw in the constructor of the two classes) is an extra
    call in the occiobj-example. Well the parameters
    are also different.
    Occidml-example constructor:
    occidml (string user, string passwd, string db)
    env = Environment::createEnvironment (Environment::DEFAULT);
    conn = env->createConnection (user, passwd, db);
    Occiobj-example constructor:
    occiobj (string user, string passwd, string db)
    env = Environment::createEnvironment (Environment::OBJECT);
    occiobjm (env);
    con = env->createConnection (user, passwd, db);
    If I have time again I will give the occidml another try. By far
    I get along with the occiobj-example.
    Thanks for all the people who helped me (or intended to).
    Greetings Roman

  • How to read AVCHD in XMP SDK sample programs

    I am just getting started with the xmp sdk. 
    It seems to me that the XMP SDK sample programs , (e.g. ReadXMP) do not work with AVCHD video. 
    Is that right?  Or am I missing something?
    (Prelude CC puts metadata into sidecar .xmp files in ACVHD/BDMV/STREAM   next to the .MTS files. That's the metadata I want to read.)
    I have tried
    ReadingXMP ../ACVHD
    which returns: "Unable to open ../AVCHD"
    I have tried
    ReadingXMP ../AVCHD/BDMV/STREAM/00000.MTS
    which returns
    "No smart handler available for ../AVCHD/BDMV/STREAM/00000.MTS
    Trying packet scanning.
    ../ AVCHD/AVCHD/BDMV/STREAM/00000.MTS is opened successfully
    dc:title in English =
    dc:title in French =
    XMP dumped to XMPDump.txt"
    Examination of XMPDump.txt reveals:
    "Dumping XMPMeta object ""  (0x0)"
    Which means that the scan found no xmp info.  Not surprising.  There should be none in the .MTS file.
    How do you get it to open up and scan the sidecar?
    If I give it the sidecar explicitly
    ReadingXMP  ../AVCHD/BDMV/STREAM/00000.XMP
    that also leads to the packet scan not finding any xmp info (which I have read elsewhere is because the xmp files don't include
    an initial xmp packet tag.... a mystery for another day.)
    So...
    Is there sample code that handles AVCHD?
    I see that there is an AVCHD_Handler.cpp in the XMPFiles library/framework, but I don't see how to get through to it.
    The XMPFiles.cpp function FileIsExcluded(...) seems to rule out any path that is a folder.
    Thanks.
    Keith

    Answering my own question ---
    After a long time of studying the XMPFiles library code, it became clear that it was NOT going to work with AVCHD... There are some places where it checks for folder-based files, (like P2 and XDCAM) but no mention of AVCHD. 
    There IS an entire file: AVCHD_Handler.cpp, but the routine that loads all the other file handlers omits this one.
    Also, there are some checks for "folder-based" formats that explictly check for the other formats, but not for AVCHD.
    I have modified the XMPFiles code to fix these oversights, and now I am happily reading the metadata I put on the AVCHD files using Prelude.   I may post more details as I go along.
    This pertains to the version downloaded as XMP-Toolkit-SDK-CC-201306.zip

  • Using probe action module after Healthy Detectors

    Hi
    I want to run a Power-shell script after Condition Detector for Healthy, Warning or Critical States. Is it possible to use a probe action module
    after my Healthy Detectors? 
    Actually when I use Probe Action for this purpose, the script runs properly but state changing happens after 3 or 4 intervals and I get this error
    in event viewer even if I don't have any state changing :
    Event ID:5500
    "Frequent state change requests caused the incoming state change request to be dropped due to it being older than the currently recorded state
    change for this monitor. This could also be due to an invalid configuration for this monitor.   Affected monitor:   Instance: All Management Servers Resource Pool Watcher  Instance ID: 5A93A06F-1018-16F9-D0F6-8F25180020E0  Management Group:
    SCOM2-Test  Request generated time: 2014-08-12T15:23:33.7119190+04:30  Requested state: Success  Recorded time: 2014-08-12T15:23:35.2620741+04:30  Recorded state Success"
    My Regular Detection for example for warning state is like this:
    <RegularDetection MonitorTypeStateID="Warning">
       <Node ID="FinalScript"> 
          <Node ID="WarningDetector">
             <Node ID="MyQuery">
             </Node>
          </Node>
       </Node>
    </RegularDetection>                        
    What's the problem with monitor's changing states?
    Thanks
    Alireza

    Consider using a script in your notification workflow, maybe as a command channel script or in a connected processing system like Orchestrator. This way you can query alert history to understand lifecycle, and formulate some sort of "closed alert description"
    in your notification based on that.
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

    Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • Function module to avoid duplicates in seacrch help through search helpexit

    Hi all,
    I have created composite seacrh help using 2 search helps( i have craeated search helps through se11).
    now after i execute my program and press f4 , it is giving duplicate values( repeated values in my list if i press f4 )
    I came to know that i can avoid duplicates if i call cooreesponding function module in seacrh help exit ( we can find this tab in se11 screens )
    Can you please help me in knowing the standard function module to avoid duplicates in seacrh help through seacrh help exit ?
    Thank u vry much in advance...

    Hi,
    check this thread
    [Thread|http://www.sapfans.com/forums/viewtopic.php?f=13&t=313139]
    Also check this FM C140_DELETE_DUPLICATES
    Rhea.
    Edited by: rhea on Dec 2, 2008 9:31 AM

Maybe you are looking for