Ipod classic sound from only one channel

My 80GB Ipod classic has sound from only one headphone. Same problem when docked so it's not a headphone or socket problem. It's as if only one channel is working. Any ideas?

Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
Clinton

Similar Messages

  • Can get sound from only one channel

    I am having trouble with my sound.  I am able to get sound fron only one channel.  Is this something I
    can fix or do I need to go to an apple store?

    Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
    Clinton

  • Line-in sound from only one chan

    Hi,
    I have a problem with my new Audigy 2 ZS gamer card. I use my PC as a second TV and have the sound from the satellite box fed into the line-in jack; however, only the right channel comes through. The microphone jack works fine for both channels but the sound quality is not as good. I borrowed an identical card from a friend for testing and I get the same problem with hers - except with hers the left channel plays. Playback from pre-recorded sources is fine. The problem does not seem to be with the hardware and re-installing the drivers has not helped. Any thoughts?Message Edited by Jasperdog on -23-2004 07:05 PM

    Bombaata wrote:
    hi all,
    just found this thread whilst looking for a solution of my problem : got an audigy ls and tried to record from a (analog) camcorder that i hooked to my tv card. the camcorder has two stereo cable/out but the audigy only one line in, hence i bought a (stereo) adapter to plug in these two lines and convert them to one. result is that i got sound on the right channel only, just like jasperdog. same prob comes up when i link my vcr to the audigy, best to my knowledge the vcr is mono. worked out well with my previous soundblaster li've! did not really get the point with the stereo adapter plug, do they sell these things for mono also ? any chance to change some settings in the driver ?
    any suggestions ?
    thanks in advance !
    Its hard to know why this is happening, but my guess would be, your adapter could be in mono. How many black stripes are there? One or two?
    The Line-In is should be Stereo, I see no reason why Creative would want to switch to Mono for this card when their older SB Li've is stereo.
    Just to make sure, when you meant two stereo cable out, did you meant the White and Red RCA cable?

  • Sound in only one channel

    No matter what speakers or headphones I try to use I only get sound out of the left speaker. Any thoughts?

    A very common complaint and it is always the right headphone that goes out. You have a bad headphone jack that needs to be replaced. Plenty of online places can do it or you can order the parts and do it yourself.
    Patrick

  • Why only one channel of sound in sequences?  Please someone try this quest

    When I add a sequence to a sequence, I have only one channel of sound but, when I open that sequence I have 2 channels of sound.
    Is it a sequence setting and if it is I see:
    outputs 2
    downmix 0
    grouping: Stereo selected
    Dual mono not selected.
    I swith these around a bit but get no change.
    My raw footage say "2 Mono" from my Sony DSR PD-150 at 16 bit, 48 khz.
    I usuall use one channel for camera sound and 2nd channel for mic.

    the number of audio channels that your nested sequence will contain is the same as the number of audio outputs you have selected for that sequence ...
    for example, if you create a sequence with 10 tracks of audio, but have only set the sequence to have 2 audio outputs, then when you nest that sequence the nest will have only 2 tracks of audio ... change the audio outputs to 4, or 6, or 8, or 10 etc regardless of how many tracks you actually use, and the sequence, when nested, will have the same number of audio tracks as the sequence has audio outputs
    ... ok, so that explains the relationship between audio outputs and the number of tracks of audio that a nested sequence contains
    so why are you getting only one channel of sound when you edit it in to another sequence? my guess is that you are only patching 1 channel ... load the source sequence into the viewer (drag and drop), now check in the patch bay area at the left of the timeline window to make sure that your a1 to A1 and a2 to A2 connections are not broken ... and edit it in.
    cheers
    Andy

  • I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    bassvid wrote:
    Thanks...now I need to do something about the iPod.
    I'm not sure which version iPod you have, but I just checked my iPod nano (current generation) and it also has a Mono Audio setting in Settings>General>Accessibility.

  • Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?

    Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?
    IPads and iPod Touches don't seem to have the same media copying restriction that my iPhone has. My main computer is at home. I have music at home and at work and sometimes I like to add it to my iPhone from work. I can do this no problem using my iPad or my iPod touch, but when it comes to my iPhone, I can only copy music to it from my main computer.
    Why would the iPhone have this restriction but not the other two devices?
    ps. Where's my "add currently playing song to playlist" button? I can't even find a third-party music app with this feature.

    Because...!
    I've no idea why either.
    Although it isn't normally possible to sync an iPod/iPad/iPhone with two computers (or manually manage an iPhone from more than one) it can be achieved if all computers have copies of the self same library. See Re: how do i sync on a second laptop without the data on my iPhone 5 being erased?
    tt2

  • Only one channel working - fixable?

    Recently my ipod starting playing only one channel through headphones or a speaker jack - eg I can hear only whatever is coming through the left side speaker. I've verified that the problem is with the ipod, not the headphones. However, if I put pressure from a specific angle on the headphone cord right above where it connects to the ipod, both L and R channels work. This goes away again when the pressure is released.
    Has this happened to anybody else? Is it a fixable problem?
    Thanks!

    You need to replace the headphone jack on the iPod.

  • Only one channel plays

    I am only getting sound out of one channel of the ipod. I have tested this via the ear buds, but also by routing the sound to my stereo -- only one channel has any sound on it. Is there some setting or something simple that can be done to fix this?

    i dont beieve there is anything you can do. but im not an expert, so take it into an apple store and ask someone for help.
    (some key information here would be what model it is so others know about it).
    HP Media center PC   Windows XP  

  • Audio - only one channel

    Hi
    I'm recording from my analog cassette deck to my mac os x 10.9.5, but get only one channel on audacity and garage band.
    deck out - headphone jack -rca to rca mini jack mac sound input
    I did read several posts, but to no avail.
    I did play with AUDIO MIDI setup
    I did play with SOUND ( SYSTEM PREFERENCES )
    please help
    thanks in advance
    peace

    Come on... It's just like a usb turntable, only a little better quality. What steps would you use to troubleshoot one of those?

  • Exported Audio Voiceover Only One Channel

    I created a quicktime screen recording for a screencast/tutorial using QuickTime X.
    Brought that clip into FCPX, added some music, a few transitions and some motion graphics/titling.
    Exported to h.264 and I'm getting stereo from the music track, but the voiceover is only on one channel.
    So I go to audio settings and batch change everything to Mono. I noticed that there are surround sound settings, that is, multiple audio 'tracks'.
    Export and only one channel.
    When I monitor in FCP X I heare the audio out of both channels.
    When I export it using FCP X H.264 to quicktime: Audio Only On One Channel
    Killing me.
    So I I loaded the H.264 exported clip into QuickTime Pro 7
    Anyway, In QT 7 I changed all the settings for audio (properties) and turned every channel that showed up to mono, saved as and the QuickTime file now plays voiceover audio on both channels. Yeah!! So it seems.
    So I save as in QuickTime 7 and when I play in QuickTime 7 I get the Soundtrack/Voice over audio on two channels.
    But when I open it in QuickTime X (or upload the file to YouTube/Vimeo) the voiceover only comes through on one channel. Keep in mind that the stock Music does play through both channels!

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Can't get sound from my midi channels

    Hello. I've been using Logic 8 for a while. 2 days ago I updated to the newest version 8.0.1 and after I did it, I can't get sound from my midi channels. Before the update I could use my Ivory pianos perfectly, but after the update I can't. I've tried every setup I can imagine. I've been here sitting for hours trying to fix it but I can't .
    Logic recognizes my keyboard, since I play...all the notes appear on the transport bar, but i can't get sound from any sampler (Ivory, EXS, EVP88, etc).
    I've checked my outputs, etc...but nothing.
    Please help me!!! I'm desperate!
    Thanks

    Do you hear the Audio tracks and only Software Instruments are not working od don't you get any output at all? I was just assuming that through the update your Apogee has been removed as your Audio device in Preferences->Audio->devices.

  • Ipod classic 160 gigs, only 150 gigs free when arrived?

    so my empty, new ipod classic 160
    reads only 150 gigs free
    now i know hard drives lose a few gigs in the translation
    from retail packaging number, to actually available gigs
    but 10 gigs?
    what gives?

    Hi Dr. Rek,
    Actually, losing 11 GB with the 160 GB iPod Classic makes sense.
    It's the same binary system and same percentage lost (about 8%, I believe) as all of the previous iPods were. It just seems worse when several GBs are lost in the conversion, simply due to the fact that this is a bigger hard drive we're dealing with.
    Think of the 27.72 GB vs/ 30 GB discrepancy, for example; 92.4% (total storage space gain) is the same rate of as it's always been, just with a 160 GB model, it turns out as about 11 GB lost.
    So, it's normal for your computer (and on your iPod, too) to read the GB space as about 149 GB instead of 160; if you calculate it, it's actually the same percentage, but not a similar amount that we might be used to, since the iPod's hard drives are just getting larger in storage space.
    I hope that all makes sense!
    -Kylene

  • IPod is not the only one. There are better....

    Freedom, freedom and better services and support. iPod is not the only one MP4 player. There are better and cheaper, there are many with better service and support. There will be many cheaper, better and with many advantages. I am very unhappy and upset because my bad experience with 60GB iPod. I suggest think about it.....

    Welcome to this forum.
    This is a customer to customer forum only, where forum members, who are only BT customers, can help each other with BT Retail products and services.
    Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
    This is a public forum which can be viewed worldwide, so please do not post any personal information, especially phone numbers, fault numbers, address information or email addresses, as this could be used to impersonate you.
    You have been offered help from BT, on this thread http://community.bt.com/t5/Bills-Packages/HOW-DIFFICULT-CAN-IT-BE/m-p/1092000
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Please Help - Audio Exporting-Only one channel

    When I export the audio from Final Cut, I get only one channel of audio ( right side). This happens with all the AC3 and PCM audio settings.
    All of the settings are correct in Final Cut. I have dual output audio on the meters and playback. I've also done a complete troubleshooting check on my playback system to make sure that everything is working properly. It is. I tunes plays everything back in stereo as does final Cut.
    Any suggestions? I'm really behing the 8ball at this point.
    Thanks,
    Bigsul
    g5   Mac OS X (10.4.7)  

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

Maybe you are looking for