Ipod died after upgrading to itunes 7 and ipod 1.2

So i upgraded my itunes to the new version and then i upgraded my ipod to 1.2. Then after restarting the computer i plugged the ipod in and let it update. Itunes freezes up and then won't recognize my ipod so i couldn't safely eject it. I unplug my ipod manually which gives me the exclamation sign then it just died. I couldn't turn it on at all. The screen is just dead and the hold button is not on. Anyone have any ideas?

I have the same problem but this only happens on my computer. It works fine during the most of it but when i use another program that makes a sound- weather it be a message noise or a game etc. it starts to skip and wont stop untill i stop the iTunes and start song again. This didnt happen with the previous version of iTunes.
Any advice??

Similar Messages

  • Can't Recognized iPod device after upgrading to iTune 7 / 7.0.1

    After upgrading to iTune 7 (and later 7.0.1), my iPod Video 60G (firmware 1.2) has been having problems getting recognized by my desktop.
    Symptoms:
    - Device manager in Windows 2000 reports the device as an Unknown USB Device
    - The iPod won't get recharged nor sync'ed.
    - The "Do not disconnect" screen won't appear on the iPod.
    - Since Windows can't recognize my iPod at all, of course I won't be able to see it in iTune.
    I plugged the iPod to my Dell laptop and got it recognized and recharged properly though.
    After poking around for a long time, I figured that if I disable the USB 2.0 Enhanced Host Controller on my desktop (thru the Device Manager), I can finally get the iPod recognized properly. Problem is, now it takes forever for me to sync my iPod (USB 2.0 disabled, so I'm stuck with the slow USB 1.1)...
    I noticed that after upgrading to iTune 7, the display backlight on the iPod is kept on (though dim). If I remember correctly, on older versions of iTune, the backlight is completely off. I'm suspecting whether the extra current draw required by the dim backlight is screwing up my desktop USB....
    Anybody from Apple gonna look into the issue and consider turning the backlight back to off in the next release??
      Windows 2000  

    I have no problems on my Dell laptop... I'm having problem with my 4-year old non-brand-name desktop only.
    ... which is kinda abnormally 'cause normally you would expect USB 2.0 power problems on laptops only. Btw, I've got the latest drivers installed already for the chipset and Win2K etc...
    What's more interesting... is the fact that on older iPod firmware, everything was running just fine... upgrade to iTunes 7.0 and boom... I'm having problems. And, it's not recognized at the Windows USB device recognition level, so I think we can isolate the problem source to the iPod firmware upgrade.
    Seriously... my bet is on the extra power drain from the backlight being left on during USB connection...
    Guess i'll have to stick with slow USB until Apple has a new firmware...
    This latest upgrade is generating a lot of unhappy customers...... and the sad thing is, Apple did a bad job in backward compatibility and made it extremely difficult to downgrade to an older version of iTune / firmware.... Apple better get these fixed asap...

  • Cannot transfer videos into my ipod touch after upgrading to iOS5 and iTunes 10.5! HELP!

    before i upgraded into iOS5 and iTunes 10.5 i was still able to transfer videos with mp4 format.
    after i upgrade, i cant transfer anymore.
    I CANT TRANSFER THE SAME VIDEOS I HAVE.
    I CANT VIEW VIDEOS THAT I DOWNLOADED FROM THE APPLE TRAILERS.
    what went wrong?
    any solution?
    is apple even aware of this?
    i need to sync my videos
    i dont like syncing them on a third party app.
    please help and advice.
    thanks!

    I am encountering the same problem. And its really frustrating to see that the same videos that played earlier cant be played now. WHY?
    There are some itunes forums that give the solution as :
    Add the video to iTunes. Convert it into correct format using iTunes. But when i try to add, it doesn't even show the video on the list. No error message is also shown to indicate why the video is not added even to iTunes. Earlier it added but gave error when doing sync. Now i cant even Add.
    Does anyone know if how to make APPLE aware of this?

  • Itunes wont open after update for itunes and ipod

    alright, so i have no clue what im doing. ive been going through this board looking for different solutions to my problem but nothing seems to be working and im running out of options.
    i was having troubles with itunes before, so i unistalled itunes and quicktime and reinstalled it, and i was still experiencing the same problems with having the program open. i uninstalled and reinstalled once more and then i got it to open and when i tried to update my ipod, it said i needed the new updater software, so i downloaded that. after all of that, my itunes won't open again and i dont know what to do anymore. i just want my stuff to work and nothing i seem to do helps with the problem.
    any ideas on what to do to get both itunes and my ipod to work again?

    Perhaps this Apple KnowledgeBase article will help:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem
    Good luck.

  • No artwork visible in iPod 20GB after upgrading to iTunes 7

    I have a iPod 20GB with colour display. I had updated artwork for all music on the iPod using iTunes 6. And now I have just upgraded to iTuned 7, and lo! all the artwork has disappeared from iPod. I can continue to see all the artwork in iTunes though, which means it is there in iPod too, but it is not visible in the iPod.
    I have tried most suggestions (unselecting "display artwork in iPod" & selecting it back, rebooting iPod, etc, etc). I have 9.5GB of songs already which makes it quite impractical to completely restoring the iPod since I have no backups of the songs.
    Please suggest something. AFAIK it is either a bug with iTunes 7 or a new iPod updated for iTunes 7 needs to be released. Own up Apple
    iPod colour display 20GB, Dell Inspiron E1505   Windows XP   iTunes 7

    Maria,
    Apple's policy is clear: iTS purchases can be downloaded only once.
    Have a look at this article in the Apple Knowledge Base for some ideas on how to find your missing music.
    If you're not able to find the music, at their discretion Apple has made one-time exceptions to the "one download" policy. You can ask for an exception by submitting the form at the bottom of this page:
    http://www.apple.com/support/itunes/store/backup/
    Good Luck! But whatever the response from Apple, remember:
    Your music is valuable - please back it up!

  • New iPod owner - Quick question about iTunes and iPod

    Hey everyone. I just bought the new 5.5G black 30GB.
    I have a lot of untagged MP3s, but my boyfriend tagged most of them. After I overwrite the untagged files (but with the same filename) with the tagged files, now that I have all of my music on iTunes and on my iPod, how do I get iTunes to do a mass refresh and see all the tags, so it can show them properly and update the iPod accordingly?
    Also, my new ipod keeps crashing! It keeps freezing when I hit the skip button or try to do something when it's loading a video or a song. It just seems really unstable. Any help is much appreciated. Thanks!

    oh sorry i misunderstood you
    this is from i-tunes help - is this any good
    Song titles look scrambled after importing from another application
    If a song's title and information don't appear correctly, the file was probably created using a program that stores information in a different way from iTunes. You may be able to resolve the problem by reversing the Unicode characters in the song tags.
    To reverse the Unicode characters:
    Select the song and choose Advanced > Convert ID3 Tags.
    To select multiple adjacent songs, press the Shift key while you click the song titles. To select multiple songs that are not adjacent, press the Control key and click.
    Click Reverse Unicode.
    To change the information back to what you had before, choose Reverse Unicode again.

  • Iphone stuck in restore after upgrade of itunes and iphone

    Hi Hope someone can help. Yesterday I there was a new software upgrade for itunes which I did, When I connected my iphone to sync straight after itune upgrade I was also prompted with new software for the iphone this fell over in the process, The phone now wants to restore but gets so far and stops with error 1603. I've tried reinstalling itunes. Any suggestions??

    Welcome to the discussions,
    did you make sure that all Apple software components where removed before you reinstalled iTunes? http://support.apple.com/kb/HT1923
    After that, make sure that the USB drivers are installed properly and Apple Mobile Device Service is active: http://support.apple.com/kb/TS1538
    Troubleshooting USB connections: http://support.apple.com/kb/TS1286

  • I just recently upgraded my itunes and now i am having problems turning on my ipod

    So i recently upgraded my itunes, and my ipod was connected to it. Now my ipod wont turn on, and i just want it to return back to before the upgrade

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod not connecting after upgrade to itunes 8

    After upgrading to itunes 8 my ipod (nano) will no longer connect to my computer and is not recognised by itunes. When I connect the ipod I get the windows 'install new hardware wizard' running but however I try to work through this I get nowhere. Looking at Device Manager in Windows says there are no drivers for the ipod - it has a little exclamation mark next to it.
    My wifes brand new ipod will also not connect and its straight out of the box.
    Not at all sure what to do next. The support pages don't seem to cover getting the install new hardware wizard. Any help or advice please!.

    Ben888
    Having reported this to my dealer, and them agreeing to supply a new lead to try, I had one final attempt at resetting the iPod.
    Having restored, reset and updated the iPod half a dozen times before without success, a reset as described here:
    http://www.apple.com/uk/support/ipod/five_rs/classic/
    worked and it is now merrily playing again in the car with the original lead.
    It would seem that Apple have developed another piece of spectacularly temperamental equipment........and people slate Microsoft!
    Hope it works for you as well!
    Message was edited by: petejigsaw
    Message was edited by: petejigsaw

  • HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • HT204406 after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there.  really?  is there no easier way to get my music back into my ipod?  like a download all button?

         after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there.  really?  is there no easier way to get my music back into my ipod?  like a download all button?  thanks.

    thanks for the reply.  guess i'll have to do that.  apple, not really happy with what you've done with this latest update.  have not been able to enjoy my music in my car since the update.  most of us dont mind changes that progress timely, but this was much more than just a progression.  this was a complete change.  and not a good one, at all.  thanks to the two people that replied.  appreciate it.

  • How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    This sounds like your problem:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?

    I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?

    You can only sync with one iTunes library/computer. To switch:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • IPod messed up after installing iTunes and iPod update...

    Two days ago I updated my iTunes and iPod to the latest updates. Now my iPod makes funny noises that I can hear through the back (without any headphones or anything) and some songs will only play for about 30 seconds and then the iPod just freezes up, makes funny noises and I am unable to turn it off. I found that by holding down the 'select' and 'menu' buttons together, the iPod will restart. I have tried restoring my iPod and it still has the same problems. Any ideas? Is this happening to anyone else?
    Dell latitude   Windows XP   iPod 30GB

    This is VERY similar to what's going on with my iPod, except mine will reset when I try to play certain songs.... I think Apple might have a few bugs left in their new software...

  • After changing airport name its different in itunes and Ipod (Airplay related)

    I'm running OS X 10.6.8 with an up to date 4th gen Ipod and Itunes.
    What I did was move a airport base station from my garage into my kitchen. I renamed this airport to Kitchen in my airport utility. Right now it shows up as kitchen in the utility. If I open Itunes this airport is still named garage. If I go to use remote app in my ipod its garage too. I have resarted all devices, but nothing seems to change this.
    Any help would be appreciated.
    Thanks

    Mac, and all who were kind enough to respond, I'm using the latest version of iTunes and iPod software, re the songs just few I recently added to my itunes library from elsewhere on my pc, no reason why the should not have synched to my ipod the same as the 3,500 or so that have done so already. Re capitalism, I'm all for it, makes the world go round, but not when it starts acting like something else. Think about this one, you buy a product, it malfunctions, you go back to the shop, the sales person says sorry, you cant talk to me but I'll give you the names of other customers who bought that product, contact them and see if they can help. That aint capitalsism, that's a joke and an abuse of market power.

Maybe you are looking for

  • No table entries found for specified key

    Hi All, I have developed a program to upload data from flat file with the help of GUI UPLOAD. It is succesfully updating data in my Z-table. Whenever I tried to view the content of table for specific field, message shows No table entries found for sp

  • JAAS in Java StoredProcedures: How to set up LoginModule

    Hi, has anyone tried to use JAAS in a Java StoredProcedure on Oracle9i? I couldn't find out how to set up the JVM to find the login configuration. Here the error I get, whenn I run the StoredProcedure: ORA-29532: Java call terminated by uncaught Java

  • Safari 6.0.5 won't full screen

    I'm using Safari 6.0.5 and Mac OS X 10.8.5. I've tried using the safari icon, view/fullscreen and keyboard shortcut, but nothing will work. Any suggestions?

  • EXPDP Error on 10.2.0.4

    Hello, Oracle DB 10.2.0.4 Windows 2003R2 I am getting below error: C:\WINDOWS>expdp system/******* full=y estimate_only=y Export: Release 10.2.0.4.0 - 64bit Production on Thursday, 21 February, 2013 0:2 4:27 Copyright (c) 2003, 2007, Oracle.  All rig

  • Doing sendRedirect in doPost gives me the standard error

    Hi, When I use response.sendRedirect within doPost I get the following error .. message HTTP method GET is not supported by this URLbut when I change that to doGet, the redirect works fine. How do I resolve this issue, as I need to use doPost in my a