Doing sendRedirect in doPost gives me the standard error

Hi,
When I use response.sendRedirect within doPost I get the following error ..
message HTTP method GET is not supported by this URLbut when I change that to doGet, the redirect works fine. How do I resolve this issue, as I need to use doPost
in my application?
Thanks,

Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H.

Similar Messages

When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev

Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>

Since installing the latest update, Firefox will not load; it gives me the following error -- XML Parsing Error: not well formed.

since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
XML Parsing Error: not well formed
locations chrome://browser/content/browser.xml
Line Number 1191, column 20:
utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
3. there may have been other errors, but I did not find them.
How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
Thanks,
NOEL

Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

HT2589 ibooks still gives me the following error message "This Apple ID cannot be used for the iTunes Store."

I've done all of the above suggested sign in methods, and yet ibooks gives me the following error message "This Apple ID cannot be used for the iTunes Store."

Found this in the forums here, it works.
"OK...I think I have found a solution. In settings, select tunes & app store. click on Apple ID> View Apple ID>Payment Information. It appears it is not saving or requiring payment information to be updated. This worked for me."
Thanks

I have just installed the latest update ...IOS 7.0.4. Prior to this, my email worked fine. Now my AOL does not work; it gives an ID/password error. Everything works fine on my Windows computer. Any thoughts?

I have just installed the latest update - IOS 7.0.4. Prior to this, my AOL email worked fine. Now it gives an ID/password error message. However, everything is fine on my Windows computer. Any thoughts?

Hello there, Tim.
The following Knowledge Base article provides some good troubleshooting steps for working on resolving your issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Why does firefox sync not give me the firefox I had before i reloaded my operating system?

I set up a firefox sync account and reloaded my operating system on my laptop. I reinstalled firefox and synced my laptop. I have all my bookmarks back. but none of my add-ons, plug-ins and shortcuts. I am left with a "virgin" firefox. Help. I want my old firefox back

Firefox Sync doesn't sync add-ons or plugins. Mozilla does intend offering that feature in the future. What do you mean by "shortcuts'?
https://support.mozilla.com/en-US/kb/what-firefox-sync <br />
''' Firefox Sync is a service that lets you synchronize your bookmarks, history, passwords and open tabs with another copy of Firefox – like one on another computer or on a mobile phone.'''

Need to change the standard error message when no data found in a window

Hi All,
We have a button in our screen, on clicking we show a window with details from a view for the selected record in the screen using master-detail relationship.
But, if i dont have any data to display, it is giving standard message,
" FRM-40350 Query caused no records to be retrieved " in a seperate window,
And if i click on Ok then the window is opening up with no records/data.
My Requirement is to
1. I need to show a custom message(some user friendly mesg) instead of standard mesg
2. And the window should not open at all.
I tried putting with :system.message_level=5 to suppress the standard mesg. But how we can achieve other two requirements.
And this should happen at block level only not at form level.
Please suggest me in this.
Thanks
Pavan

Hi,
No, I have just put my original code.
This is what i have tried based on our suggestion.
   BEGIN
          IF event = 'WHEN-BUTTON-PRESSED'
               --AND cnt <> 0
          THEN
          GO_BLOCK('XXSCP_GBL_CUST_PEG_V');
      EXECUTE_QUERY;
      l_chr_so := :xxscp_gbl_cust_peg_v.sales_order_number;
      fnd_message.DEBUG('SO:'||l_chr_so);
      :parameter.p_excep_detail:='FALSE';
          IF l_chr_so IS NOT NULL
               THEN
          SHOW_VIEW('XXSCP_GBL_CUST_PEGGING_CON');
          SHOW_VIEW('XXSCP_GBL_CUST_PEGGING_STK');
          app_window.set_window_position('XXSCP_GBL_CUST_PEGGING_WIN',
                                         'CASCADE',
                                         'XXSCP_GBL_EXCEP_DETAILS_WIN');
      fnd_message.DEBUG('xx');
      END IF;
      ELSE
          NULL;
          END IF;
    EXCEPTION
         WHEN OTHERS
         THEN
         NULL;
   END;I can see, its not going to IF conditon, stil the window pops up.
Thanks
Pavan

I am facing problems with my adobe illustrator(64-bit) version which I am using on my windows 7 (64-bit) version. When I try to open the application it gives me the following error:

The procedure entry point not found. I have already done a bit of troubleshooting by uninstalling it and re-installing it back again by disabling the anti-virus and windows firewall. It works fine for sometime but after sometime when I log back into my computer it starts giving me the same error. The 32-bit version is working fine but the 64-bit version is giving me this error message and does not start. I have also worked on the system files that could be corrupt but still no progress.

Try downloading from here: Download Photoshop Elements products | 13, 12, 11, 10
FYI this is the Photoshop section, Elements questions should be asked here: Photoshop Elements
Benjamin

Ipod gen 4 only one podcast i download gives me the playback error WHY?

ipod gen 4 only one pod cast i download gives the playback error Why?

Likely it got corrupted.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete and redownload

After installing Maverick, my downloaded movies will not play in Quick Time. It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete." What can I do?

After installing Maverick, my downloaded movies will not play in Quick Time. I receive the following error message:
You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete. So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
Well I did find a way to delete it, by going into the various components and one by one deleting it. Now I reinstall it and the message is that this Quick Time is for an earlier version before Maverick 7. SMH....Now what.?

Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H.

Adobe Muse only give me the actionscript error message... I tried all solutions posted in this forum

Hey so here the log I get wehn the actionscript error pops up..
Hope this helps.
Thanks for the help.
Error: HTMLLoader failed to initialize
          at flash.html::HTMLLoader/initHTMLEngine()
          at flash.html::HTMLLoader()
          at mx.core::FlexHTMLLoader()
          at mx.core::ClassFactory/newInstance()
          at mx.controls::HTML/createChildren()
          at com.adobe.muse.widgets::MuseHTML/createChildren()
          at mx.core::UIComponent/initialize()
          at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
          at mx.core::UIComponent/addChildAt()
          at spark.components::Group/addDisplayObjectToDisplayList()
          at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
          at spark.components::Group/setMXMLContent()
          at spark.components::Group/createChildren()
          at mx.core::UIComponent/initialize()
          at com.adobe.muse.widgets::BaseAttachingWidget/initialize()
          at com.adobe.pash.ui::DocumentCanvas/initialize()
          at com.adobe.pash.ui::PreviewCanvas/initialize()
          at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
          at mx.core::UIComponent/addChildAt()
          at spark.components::Group/addDisplayObjectToDisplayList()
          at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
          at spark.components::Group/setMXMLContent()
          at spark.components::Group/createChildren()
          at mx.core::UIComponent/initialize()
          at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
          at mx.core::UIComponent/addChildAt()
          at spark.components::Group/addDisplayObjectToDisplayList()
          at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
          at spark.components::Group/setMXMLContent()
          at spark.components::Group/createChildren()
          at mx.core::UIComponent/initialize()
          at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
          at mx.core::UIComponent/addChildAt()
          at spark.components::Group/addDisplayObjectToDisplayList()
          at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
          at spark.components::Group/setMXMLContent()
          at spark.components::Group/createChildren()
          at mx.core::UIComponent/initialize()
          at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
          at mx.core::UIComponent/addChildAt()
          at spark.components::Group/addDisplayObjectToDisplayList()
          at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
          at spark.components::Group/setMXMLContent()
          at spark.components::Group/set mxmlContent()
          at spark.components::SkinnableContainer/set mxmlContent()
          at spark.components::SkinnableContainer/createDeferredContent()
          at spark.components::SkinnableContainer/createContentIfNeeded()
          at spark.components::SkinnableContainer/createChildren()
          at spark.components::Application/createChildren()
          at mx.core::UIComponent/initialize()
          at spark.components::Application/initialize()
          at spark.components::WindowedApplication/initialize()
          at com.adobe.pash.air::PASHonAIRApplication/initialize()
          at MuseOnAIR/initialize()
          at mx.managers.systemClasses::ChildManager/childAdded()
          at mx.managers.systemClasses::ChildManager/initializeTopLevelWindow()
          at mx.managers::SystemManager/initializeTopLevelWindow()
          at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::kickOff()
          at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at mx.preloaders::Preloader/timerHandler()
          at flash.utils::Timer/_timerDispatch()
          at flash.utils::Timer/tick()

Is it possible you're using a case-sensitive file system on your new mac?
Can you make sure you've got the latest version of Adobe AIR installed?
http://get.adobe.com/air/
Also, you may want to try joining the muse prerelease program at museprerelease.com
The new beta version is unlikely to have this problem.

My pc could not dl the newest itunes 11.something. I have windows vista 64 bit. when I uninstall and then reinstall it gives me the same error code (Error 7 windows error 126) Anyone help me? please

Says it all

This article goes over a complete uninstall/reinstall.
Please make sure you restart the pc and remove all related components and files. Do you get the same error?

Why does my iPad not give me the option to enter a phone number for iMessage or FaceTime?

I don't have the option to enter a phone number in iMessage or FaceTime on my iPad. I used to have that option, but it has disappeared.

Use an email address. You can get a gmail.com address just to use for FaceTime & Messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

ITunes10.5 does not open. What is the windows7 (error 193)

I want to open iTunes windows gives error. (windows 193) What is this? . iTunes but it did not delete and re-installed.Do help ?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Doing sendRedirect in doPost gives me the standard error

Similar Messages

Maybe you are looking for