IPOD Nano 4th Gen still plays but has black screen after being washed

A  few months ago my mother washed my iPOD Nano 4th Gen by accident - we had it in a bag of rice for a long time. After a while it refused to start up so we put in a drawer and hoped it would "magically" fix itself.
Few months later... it works (plays music, can select menus..)!
But the screen is black, lol.
I have tried restoring it in iTunes, also resetting the Nano repeatedly with the buttons and fiddling with the hold button, but none of it works... Could the backlight be shot after being damaged in the wash? Is it possible for Apple to restore it even though my warrenty is now gone?
Any help would be greatly appreciated!

Welcome to the Apple Support Communities
Your problem isn't covered by warranty, so you will get a refurbished iPod. See how much it will cost > http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod

Similar Messages

  • Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes

    Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes tried to check usb driver but computer says it is working properly

    Just disconnecting it without ejecting should not cause permanent damage.  It may cause data corruption, if iTunes was in the process of syncing at the time.  But iTunes should still see the shuffle and (maybe) tell you to Restore it.
    Is it possible that the "accident" damaged the USB cable? 
    Make sure you have done this on the shuffle since the problem occurred
    http://support.apple.com/kb/HT1655
    And you should also shut down (power off) the computer, if you have not already.
    Have you tried more than one USB port on the computer (not a hub if you use one)?  You can also try it with all other USB devices disconnected, except for standard keyboard and mouse (if normally used).
    If those things do not help, what version of Windows do you use?

  • IPod touch (4th gen) won't connect to my wifi after being lost

    I lost my iPod touch (4th gen) yesterday so "locked" it using iCloud. The nice folks at the vet office found it and I retrieved it today. Noticed it wasn't actually locked, could listen to podcasts and open apps right away, and it syncs fine when I connect it to my computer. But it won't rejoin my home wifi, doesn't even ask for password, just says unable to join. Network is fine, or I wouldn't be able to leave this question! Thanks for any help...

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
    http://support.apple.com/kb/HT1454

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I was in Aussie last month and dropped my iPod Touch (4th Gen) on the road. The screen was cracked on the top left-hand corner. The screen got fixed but the wireless stopped working. Can I still get it fixed under my warranty? (bought last July)

    I was in Aussie last month and dropped my iPod Touch (4th Gen) on the road. The screen was cracked on the top left-hand corner (where the wireless area is). The screen got fixed but the wireless stopped working. So I am wireless-less... I bought it last July and its still under warranty, but can I still claim a repair on it?

    No because it was physical damage

  • I just bought a philips fidelio docking speaker and when I plug my iPod touch 4th gen it charges but dosent play music through the speaker.

    I just bought a philips fidelio docking speaker and when I plug my iPod touch 4th gen it charges but dosent play music through the speaker.

    Does Phillips say it will work with a 4G iPod with 6.1.5?
    Have you went to their support site?
    Which dock did you get?
    This one
    http://www.usa.philips.com/c-p/DS8500_37/-/specifications
    says only compatilbe with the 1G, 2G and 5G iPod tpouchs (as well as some other iOS devices)

  • Using a Windows formatted iPod Nano (4th Gen) with Bootcamp on a Mac(Win XP

    Hey I was wondering if anyone knows if you can use a previously formatted iPod Nano (4th Gen) with a Mac that has XP Bootcamped on to it. If the Nano is placed in manually manage music with the original computer it was formatted with, will it be able to accept music, movies, podcasts, etc from the windows on the Mac or will they still be incompatible?

    Well, I have 4 internal drive bays filled already, is there room somewhere for 5th one in the box? I wasn't aware of it if there is?? My mac is MacPro3,1, early 2008.
    That macsales.com link is interesting but I'm not in the US (I'm in Croatia), and all those brands are supidly expensive here, that $80 esata docking station is almost $200 here... bahh. For that price I may as well buy a whole new 3TB external disk, I want to dock the old one to save money.
    I've browsed around and I've found Icy Box docks, which have much more reasonable prices:
    BOX IB-110StUS2-B
    ICY BOX IB-111StUS2-Wh
    ICY BOX IB-115StUS2HC
    They all claim to have OSX support... anyone have any experience with them?

  • Dropped Ipod nano 4th gen

    ok last night I dropped my Ipod nano 4th gen without a case on my tile floor. It was about a 3-4 feet drop.
    So today I was running and than after a couple mins of running with the song still playing my ipod buttons froze, nothing worked the screen remained black but the music still played. than after a few seconds trying to make the screen show back up my whole volume limit raised up maxed with a weird twisted sound to it. also, every now and than my songs would pause than play again without me doing anything to it.
    I also was running in cold weather, is that the case?
    Could of me dropping my ipod caused this to happen?
    or can dropping my ipod cause any problems at all?
    thanks

    You posted this in the MacBook forum.
    Try posting it in the iPod forum. You will get much better feedback.
       Joseph Kriz

  • Dropped my ipod nano 4th gen

    ok last night I dropped my Ipod nano 4th gen without a case on my tile floor. It was about a 3-4 feet drop.
    So today I was running and than after a couple mins of running with the song still playing my ipod buttons froze, nothing worked the screen remained black but the music still played. than after a few seconds trying to make the screen show back up my whole volume limit raised up maxed with a weird twisted sound to it.
    Could of me dropping my ipod caused this to happen?
    or can dropping my ipod cause any problems at all?
    thanks
    FuzzyDice is offline Reply With Quote

    You posted this in the MacBook forum.
    Try posting it in the iPod forum. You will get much better feedback.
       Joseph Kriz

  • Ipod nano 4th gen

    Hello,
    I have a problem with my iPod Nano 4th Generation.
    My Calendar, Notes and Contacts wont sync anymore in iTunes.
    When I connect with iTunes I only see; Summary - Music - Movies - TV - Shows - Podcast - Audiobooks - Photos.
    Calendar - Notes and Contacts have gone.
    I have reset my iPod but that did not work.
    Can someone give me advise what has gone wrong or what I am doing wrong.
    I have an iMac 27 inch late 2013, with OSX version 10.9.4(13E28) - 3.2 GHz Intel Core 5 - memory 8GB 1600GHz DDR3.
    Software that came with it, all up to date and my iTunes is version 11.3
    iPod Nano 4th Gen. Software version 1.0.4 - 8GB.
    Thanks.

    Please press the middle button AND the Play/Pause button at the same time. I had that problem, too.

  • IPod nano (4th gen) not recognized by iTunes 11.1.3

    I have an iPod nano (4th gen). After upgarding iTunes to v 11.1.3 (MacBook Pro) I get the follwoing message:
    iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.
    Unfortunately, I restored to factory settings, which erased everything, but each time I connect the iPod I get the same message.
    It must be an issue with compatibility because I get the same message with my wife's iPod (same gen), but hers syncs just fine on her iTunes (v 10), and I get the same message using two different USB cables.
    So now my iPod is essentially empty (factory settings) and as good as a paperweight unless there is a way to get iTunes to recognize and sync. If I could get past the error message, I suspect it would be easy to sync automatically or manually.
    Any help would be appreciated.
    Thanks

    Hi JMfromMN,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Since your wife's iPod displays the same behavior omn your computer, it sounds like the troubleshooting for the iPod itself (which you've largely already done anyway) can be skipped.
    Cheers,
    - Ari

  • HT1339 how do I wipe my ipod nano 4th Gen without itunes?

    I have an new Ipod Touch with is backed up to my itunes with all my current music/files etc, however I am wanting to sell my old Ipod Nano 4th Gen and it needs to be completely wiped. How do I wipe it without iTunes as when I plug the Nano in, it starts syncing all my current music. Ive tried holding down Menu and the circle button, but that hasnt done anything. please help!

    Hello, clowwolf. 
    Thank you for visiting Apple Support Communities.
    I see you have tried some troubleshooting steps already with the issue persisting.  This article has some additional troubleshooting steps that I would recommend going through when experiencing this issue.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Cheers,
    Jason H.

  • My ipod nano 4th gen was submerged in water.

    My ipod nano 4th gen was submerged in water. After it dried inside, i tried to turn it on but doesnt work, showing the blank screen. I plugged it in, held the menu button and it made 2 beeps then stopped.I could still connect it to the computer and access its content . What is the problem with it? And would apple to be able to repair it at what price approx?
    Thx in advance

    The damage is not covered by the Apple warranty.  An out-of-warranty Nano repair is about $80 (plus tax).  Before you send it in for repair, be sure that you have the music backed-up.

  • Plugging Ipod nano(4th gen) in for the first time... Help

    I have the ipod nano 4th gen. I plugged it into the computer for the first time, and itunes comes up. It then says you can register now or later I just clicked later(I am actually doing this for my sister, I have and ipod touch that I did the same with) But anyways, I clicked register later, and then it tells me that I have to Read and agree to the software(or something on that order) So I read through all of that and at the end, there is a box you can check to say that you have read and agreed. I did that, but then you have to click a button to confirm/continue im guessing. Well, my problem is, that my computer screen is too small for me to see the button, in other words, I cant confirm/continue and am stuck there, I cant do anything else with the ipod with out continuing this step. I have tried to Maxamize the screen and dragging over. nothing seems to work.
    Is there any other day to agree and confirm to this? If there isn't, is there a way that I can get to the confirm/continue button?

    I changed my screen resolution to 1024 x 768,
    yet I still cannot see the confirm/continue option.
    I have tried all screen resolutions,
    and I'm not able to see the button.
    Am I doing something wrong?
    I really need to know,
    because I need to use my iPod.

Maybe you are looking for

  • Audio cracking and popping

    These are my system specs, CPU: AMD Phenom II X6 1100T 3.3GHz RAM: 4GB Kingston HyperX @ 2000MHz GPU: Sapphire HD4890 VaporX 1G HDD: Seagate SATA11 500GB MOBO: ASUS M4A89TD PRO PSU: Corsair TX850W OS: Windows 7 x64bit Home Edition So i have an AMD sy

  • Creating worksets via API

    Hi all! Is it possible to create and change worksets dynamically via API? I have found documentation how to read pcd objects and their properties but not how to edit pcd objects: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uui

  • Not able to add essbase server ( part of Planning installation)

    Hi experts, We have installed and configured the Essbase. We have started the services. We are not able to add essbase server to EAS console. It is showing network error .. When we see essbase log, we got the following error. "Essbase global applicat

  • Locking documents

    Is it possible to lock a PSD file, specifically a logo, so that it maintains the proportions when someone else uses it in a document? I'd like to keep the integrity of our logo. Thanks.

  • Maintaining folder structure within iPod

    So here's how my music folder is organized - Top level - MyEnglishSongs --Artist_1 --Artist_2 GameSoundTracks --Game_1 --Game_2 SongsFromFriend_1 --Movie_1 --Movie_2 SongsFromFriend_2 --Movie_1 --Movie_2 MyHindiSongs --Movie_1 --Movie_2 MyTamilSongs