Ipod nano (5th generation) - want to use headphones and charge at the same time

I have an ipod nano (5th generation).  Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

Similar Messages

  • Satellite M30X-122: How to use headphone and speaker at the same time?

    Hi,
    is there any possiblity to use the headphone and the speaker at the same time?
    When I plug the head phones in the socket, the speaker is swtiched off now.
    Thanks
    Peter

    Hi Peter,
    Unfortunately there is no way to use both the headphones and the speakers at the same time. This is because tghere is as physical disconnection of the current to the internal speakers when you plug in the headphones. It is not software controlled. The only way of bypassing this would be to dismantle the headphone socket and permanently solder the connections which are broken when you insert the headphone socket.
    regards,

  • Using headphones and speakers at the same time: Audi

    I have the audigy. My friend does this with his comp. He plays games through his headphones while his computers mp3 plays through his speakers. Possible with the audigy? If so how do I do this.
    I have Vista btw.

    bump?

  • Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

    Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

    Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
    NOTE:  You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

  • Headphones and Speakers at the same time on ZS 2

    Hiya
    I have the Audigy 2 ZS sound card.
    I have a set of normal speakers with the one connector and a set of headphones that has 2 connectors, one for the mic and one for the headphone speakers. This is also a USB set so i have that option aswell.
    Now i know i can put the headphones in the front panel but i dont really want to do this as my pc would mean have the fron panel open.
    My question is, how am i able to use both the headphones and speakers at the same time. At this moment if i plug the USB headphones in they take over and no sound comes out of the speakers.
    I would like both if poss
    Thx
    Paul

    You can get a stereo splitter adapter/cable and with it, you can have the headphone and speaker connect to the same output jack from the soundcard.
    Jason

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

  • I cannot use data and voice at the same time.

    I cannot use data and voice at the same time.
    I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
    This is a very basic issue, am I missing something? Please help.
    My Model is lumia 820 with the latest portico update.
    TIA
    Sandeep

    I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

  • Can we use exceptions and conditions at the same time?

    can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • Can WRT54G use WPA and WEP at the same time?

    I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
    In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
    Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
    Do I have to buy a 802.11g wireless print server? Or is there another solution?
    I don't supposed the linksys router can do both WPA and WEP at the same time?
    Connecting the print server to the router with a cable is not feasible. They are on different floors.

    both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

  • I have an iPad 2 (wifi 3G). Is it correct to use wifi and 3G at the same time ? Or one at time depending on connectivity? Thanks.

    I have an iPad 2 (Wifi + 3G). Is it correct to use the Wifi and 3G at the same time, or one at a time, depending on connectivity? Thanks in advance.

    Your iPad will use wifi first if available. If wifi is not available, it will use 3G.
     Cheers, Tom

  • Using LIKE and IN at the same time

    Is it possible to use both LIKE and IN at the same time such as:
    select first_name from emp where user_id LIKE IN('1%','2%')
    Thanks in advance
    --Joshua                                                                                                                                                                                                                                                                                                                                   

    Or consider the IN - parameters as a string. Then you can do the following:
    SQL> SELECT ename
      FROM emp
    WHERE EXISTS (
              SELECT NULL
                FROM (SELECT RTRIM (SUBSTR (nums,
                                            INSTR (nums, ',', 1, iter.pos) + 1,
                                              INSTR (nums, ',', 1, iter.pos + 1)
                                            - INSTR (nums, ',', 1, iter.pos)
                                   ) nums
                        FROM (SELECT ',' || 'SCO,BLA,CLA' || ',' nums
                                FROM DUAL) csv,
                             (SELECT ROWNUM pos
                                FROM all_objects
                               WHERE ROWNUM < 50) iter
                       WHERE iter.pos <=
                                  (  (  LENGTH (csv.nums)
                                      - LENGTH (REPLACE (csv.nums, ','))
                                   / LENGTH (',')
                                - 1)
               WHERE ename LIKE '%' || nums || '%')
    ENAME    
    BLAKE    
    CLARK    
    SCOTT    
    3 rows selected.

  • My iPod nano 5th generation will not turn on or charge. What is going on??

    Yesterday, after listening to my iPod, I forgot to lock it and it died. When I tried to charge it, however, the screen would not even light up. I then connected it to my computer just to see what it would do (I have a wall charger) and my computer recognized it but itunes did not. The screen stayed black. Do I need a new battery, or is something else going on?

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • HT3302 My Ipod nano 6th generation have drop into water and how much the repair cost

    My iPod Nano 6th Generation acccidentally put into washing machine,it cannot open now.
    i decide to repair it,how much it cost ?(my iPod still under the warranty)

    Here is Apple's pricing: http://www.apple.com/support/ipod/service/prices/
    You may find that it is cheaper to have it serviced by a third party company, but the decision is up to you.
    By the way, this is the iPod Touch forum.
    B-rock

  • Using ipod and charging at the same time

    I want to know if i can use the ipod and charging it at the same time.

    Your iPod has to be on automatic update with disk mode off to be able to charge while using your iPod.

Maybe you are looking for