Is anyone else finding that the acceloromiter does not seem to work in some aps with iOS7

Have recently (as most would have) upgraded to iOS7 on my iPad and iPhone, love it but I am find a few of my apps like eBay and remote do not rotate to landscape naymore. any one else with  this issue and is there a fix?

As hunter9000 pointed out above, your code has syntax errors; are you even able to compile this?
The braces "{" and "}" delimit classes, methods, and blocks ( including if/ while/ for etc ).
Methods must be within classes i.e. after the opening brace and before the closing brace of a class.
Similarly, statements and other blocks must be within the method.
In your code, you have blocks simply floating about in your class, NOT allowed. They must be in a method. This is why proper indentation is important, anyone would be able to catch problem like this with just a quick glance.
public void enter()
    {//opening brace for the enter method
        numberOfVisitors = numberOfVisitors + 1; //This takes the number of visitors adds it to itself and then adds 1
        totalFees = totalFees + fee; //This takes the fees of the day adds it to itself and then adds 12
//    } //NO! You're closing the method too early. More content follows.
//    { NO! You're making an unecessary block here
//, reducing readability and potentially putting variables out of scope
        if(numberOfVisitors == 10)
        { //If the number of visitors = 10 then it should set isFull = True
          //opening brace for your if block
            isFull = true;
        }  //close the if block
//        {//NO! again, unecessary block
        if (isFull)
        { //Once it is true the string should be shown to say that know more people can enter.
            System.out.println("The Exibition is currently full");
//} extra brace from earlier
}//close the methodClearer now?

Similar Messages

  • Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.

    All, 
    I attemped same using Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.  I switched out skins and same issue.  I am using IE8. 
    When published as swf, exit button on skin works fine.  Any ideas on solve for the PDF version exit button?  We would rather publish as PDF since all files are contained in the PDF wrapper.

    Hello,
    Welcome to Adobe Forums.
    This issue is reproducble at my end, need to do some more testing before I can tell you any solution or action plan for this issue
    Thank you for your patience.
    Regards,
    Vikram

  • Anyone else finding that the keyword editor doesn't refresh properly upon changes

    When I have a clip with multiple keywords and I want to delete one of the keywords in the keyword editor, I find that the editor window refreshes incorrectly. The results are accurate but the editor appears to erase the wrong keyword.   Not the worst bug, but annoying.  It reminds we of the refresh problems in the browser when applying custom names 10.1.

    but any time I do a find for a certain keyword,
    Try the find menu (edit/find or cmd+F). In Source choose your main folder all your files are in. Criteria choose keyword and fill in one of the keywords you want.
    Be sure to have a checkmark in fornt of the options 'Include all subfolders' and 'include Non indexed files'.
    Hit find and let Bridge do it's searching. This first time may take a bit long but now Bridge starts indexing all files. After this you should be able to use the option for finding keywords as normal.

  • Does anyone else find that the new firefox 4 sucks? How do I get back the old one?

    I upgraded to the new firefox 4 and I HATE it... I tried to uninstall it, and lost all my bookmark tabs, and then I tried to install the old firefox but couldn't, it only allows me to use the new one, which is also slowing down my laptop big time! Has this happened to anyone else?

    I've not had any problems with Firefox 4 being slower, but I've never been so disappointed with a program in years. I went back to 3.6.16 and it's much more stable. I'm an attorney and use the Bankruptcy Court websites daily--literally, hourly--and 4 crashes on them repeatedly, will not download mailing matrices, will not print claims registers, or literally do ANYTHING as well as 3.6 did. If a browser won't do that, then it's worthless to me. We HAVE to have stable programs, and everything now in the Federal courts nationwide has to be electronic filing. I've tried all the tricks I know (and I've been a computer user and builder ever since Win 3.1) and nothing saved it. I finally uninstalled 4, did NOT offload my user profiles, and they all picked up again on 3.6.16. I don't plan on going back to 4--ever.

  • Has anyone else noticed that iBooks search does not find all information that should be located for a specific search criteria?

    I am converting a novel to ePub format.  I am currently in the process of adding "end notes" to the book.  Each will have a flag embedded at the proper spot in the various chapters that is coded as "[See End Note xx]" where xx is a one or two digit number.  Each of the flags has those words surrounded by the HTML that links the flag to the proper end note at the back of the book.
    To verify that I have indeed inserted correctly each end note, I copy the book's epub file from my desktop PC to the iPad.  I then do a search in iBooks to locate each occurance of "[See End Note" or just "End Note".  I should see each of these flags listed.  Last night it would list all of them except "[See End Note 28]"!   If I did a search for "28", it would appear.
    I then copied just the flag itself ("[See End Note 28]") without the associated linkage HTML to the back of the document, and placed the copy just in front of the paragraph that contains it. Neither of the two flags were found.
    I then duplicated just the flags for end notes 27 and 29 which the search function had located.  I placed the copies surrounding the copied flag for 29.  The result was as follows in the text of the book:
    [See End Note 27]
    [See End Note 28]
    [See End Note 29]
    Although 27 and 29 were still being shown in their normal places, none of the above three inserted (test) flags was displayed by the search!
    It seemed that the iBooks search goes through part of the book, but cannot take the whole book in one piece.  It then continues, but leaves a gap that is not scanned per the search criteria.  To test that theory, I removed the entire text of several chapters that did not contain any end notes.  I then loaded this modified copy of the book into the iPad.  When I ran a search using "End Note", all of the flags (including the special test flags) were displayed.  The list included the "missing" "[See End Note 28]" that cannot be found if the all of the chapters have their text!
    I shall be calling Apple in a few minutes to again attempt to get the apparent "bug" (aka design or coding flaw) removed such that it does not
    impact the ability of the iPad to be a useful tool.

    Not all movie studio signed up to the agreement with Apple to allow redownloading of movies, only those that did will have their movies available in the purchased section of iTunes.

  • Anyone else notice that facial recognition does not recognize people with "white/silver" hair?

    I have several family members who are premature gray and have full heads of hair and the facial recognition ID's them about 25% of the rest of my subjects. anyone else notice. and their hair is in exposure.

    Same thing here.  Lr had a hard time with a couple people with pure white hair.  About the same 25%.

  • HT1338 I wanted to set my Safari to open links in tabs instead of windows. I have gone to safai preferences and chose the correct setting to always open in Tabs. The setting does not seem to work. I have logged of then logged back in but still every link

    I have gone to Safari preferences and have made the selection in TABS to open links in TABS instead of Windows. I have chosen "Always".
    The setting has not stuck. I tried logging out then logging back in however it still does not work. Am I missing something?

    I did not have any extensions and reset Safari. I have the most update versions as per screenshot
    I downloaded youe app and below are the results;
    Hardware Information:
              iMac (27-inch, Mid 2010)
              iMac - model: iMac11,3
              1 3.2 GHz Intel Core i3 CPU: 2 cores
              4 GB RAM
    Video Information:
              ATI Radeon HD 5670 - VRAM: 512 MB
    System Software:
              OS X 10.8.4 (12E55) - Uptime: 0 days 1:23:37
    Disk Information:
              ST31000528AS disk0 : (1 TB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 993.77 GB (937.7 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
                        BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 5.57 GB (5.56 GB free)
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.74)
              com.sophos.kext.sav          (8.0.4)
              com.trusteer.driver.gakl_driver_2          (1)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.rim.BBDaemon.plist
              [loaded] com.sophos.autoupdate.plist
              [loaded] com.sophos.intercheck.plist
              [loaded] com.sophos.notification.plist
              [loaded] com.trusteer.rooks.rooksd.plist
    Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [loaded] com.hp.devicemonitor.plist
              [loaded] com.hp.messagecenter.launcher.plist
              [loaded] com.rim.BBAlbumArtCacher.plist
              [loaded] com.rim.BBLaunchAgent.plist
              [loaded] com.sophos.uiserver.plist
              [loaded] com.trusteer.rapport.rapportd.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    User Login Items:
              Cobook
              Officejet Pro 8500 A910 [2DB56A]
              Mail
              Dropbox
              AdobeResourceSynchronizer
              TomTomHOMERunner
              BlackBerry Device Manager
    3rd Party Preference Panes:
              Flash Player
              Flip4Mac WMV
              Rapport
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              googletalkbrowserplugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              Unity Web Player.plugin
    Bad Fonts:
              None
    Top Processes by CPU:
                   2%          WindowServer
                   2%          WebProcess
                   2%          EtreCheck
                   0%          Safari
                   0%          InterCheck
                   0%          mds
                   0%          fontd
                   0%          Microsoft Excel
                   0%          rapportd
                   0%          BBLaunchAgent
    Top Processes by Memory:
              242 MB             WebProcess
              152 MB             InterCheck
              143 MB             Finder
              131 MB             Safari
              127 MB             Microsoft Excel
              106 MB             Mail
              94 MB              WindowServer
              70 MB              mds
              66 MB              Dropbox
              49 MB              Dock
    Virtual Memory Statistics
              79 MB              Free RAM
              1.71 GB            Active RAM
              1.76 GB            Inactive RAM
              461 MB             Wired RAM
              289 MB             Page-ins
              0 B                Page-outs

  • Does anyone else think that the AppleMac group of products are marketed in a greedy way? I have MacBook Pro 10.5.8 and am now told that I have to upgrade to Snow Leopard to sync my new iPad. Of course there isn't enough memory on the MacBook? I'm angry!

    Does anyone else think that the AppleMac group of products are marketed in a greedy way? I have MacBook Pro 10.5.8 with Leopard and am now told that I have to upgrade to Snow Leopard so that my system can download the relevant iTunes upgrade to sync my new iPad and get my audiobooks (which don't appear anywhere on the device right now). Of course there isn't enough memory on the MacBook and Snow Leopard costs more also? I don't have financial resources to pay for all the new memory requirement and related upgrades they say I need just to sync my iPad with my purchases.

    Thanks for the reply but I already knew this. $20 for Snow Leopard which asks for 5gb free memory. I can only see that I have 4 gb (which I feel is rather a pathetic amount of available memory for any computer). To upgrade this computer's memory will cost another fee (I haven't researched this yet but gather it's more than $20). Then of course I could also be told that the OSX Mackbook Pro that I have can't be memory upgraded - which means I'm being told to buy a new computer - hence my very frustrated last email. I have been given a lovely iPad 2 as a present and now can't sync at all with anything because of this ongoing upgrade nightmare. How on earth am I going to be able to sync my movies, audiobooks etc to this new device??

  • Does anyone else feel that the iPhone is sluggish after update 1.1.1?

    Is it just me or does anyone else feel that the iPhone feels more sluggish after update 1.1.1? I haven't unlocked or hacked the phone in any way and so it must be due to the update. I thought that the sluggish behavior could be due to a recent update and so I reset the phone. But I still feel that the iPhone has lost that responsiveness that it used to have before. Any one else experiencing this?

    Yes, without question I thought typing, especially, was sluggish at first. However, after a day it has seemed to speed up and now, I'd say, is back to original performance, or close to it.
    Also, I have lots of contacts (2500), and the phone has been very slow to make the first identification of email addresses when I start typing. Specifically, it freezes for several seconds after the first letter is typed. However, I believe that process is a bit faster after this update.
    Derek

  • My movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    I would use Quicktime Pro.
    See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
    To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923  (Quicktime 7.6.6 is the latest version.)
    To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html

  • HT5192 After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

    After installing IOS 5.1, I am unable to double click the home button and access the camera. Is anyone else experiencing this issue? Does a fix or work aroud exist?

    I just updated--my Camera is a disaster.  Yes, I know how to turn (and position) the Camera now. However, every photo I take is UPSIDE DOWN in the Camera Roll OR Photo Stream.  Even worse, a number of my Apps (Weather Underground, for example) are ALSO now upside down.  Has anyone here experienced these serious orientation problems after this update?  I've read the 'Manual' and its as if it doesn't exist.  However, if I leave the Apple site, customer complaints about orientation abound...
    This is my first time posting here about an issue (well, the same issue - I posted last week about the Camera, and no one responded).  Any advice at all about how to get this corrected is much appreciated!
    Thank you!
    Lisa

  • What does the v3 WRE54G do that the v2 does not?

    Does anyone know what the difference is between the WRE54Gv2 and WRE54Gv3?
    I know that the first model, which I'll call "v1" for now, did not have a wired network socket at all. Without the RJ-45 socket, the v1 was unable to create a wired WDS extension. Without a wired extension, WDS extenders such as the WRE54G must chop wireless throughput in half.
    The RJ-45 network socket on the v2 makes the extender far more versatile. It can be used as a wireless bridge or a wired WDS extension, which does not chop your wireless throughput in half. My complaint is the position of the RJ-45 network socket. When the expander is mounted on the wall or plugged into a wall socket directly, it would be most convenient for the network socket to be at the bottom.
    Could someone let me know if the placement of the RJ-45 socket is something that has changed with the v3?
    I see the FAQ as a "sticky" post at the top of the message board mentions that the WRE54G "does not support WPA encryption at this time." I believe that this was simply a copy-paste from an old FAQ regarding the v1, but I cannot say for sure.
    Does anyone know if the v2 or v3 support WPA with current firmwares? WPA support is an absolute must-have feature for me.
    Also, it appears that GPL code is available on the support page for the v2 and for the v3.
    Are all versions really Linux-based? ...or did Linksys simply place links to the v1 GPL code on the support page for every hardware version?
    Thanks, all!Message Edited by Ichinisan on 05-20-200709:05 AM

    It's incorrect to say that the socket is only for initial configuration. WRE54G v2+ supports a wireless bridge mode, which has the device connected directly to another device over cat5 ethernet.
    Also, without the ethernet cable, wireless throughput is cut in half for all wireless devices (even the ones that are closer to the source AP/router). This is true of all WDS-compliant range expanders because all LAN traffic on one AP must be re-transmitted to the other. With a wired ethernet cord going from the source AP/router, the two APs can talk to each other through the wired connection and it's not necessary to cut the wireless bandwidth in half. It's not clear if the Linksys products will take advantage of the wired connection in this way.

  • Is there a settings in Win7/HP feature that the battery does not charge until it is under 95%

    I just purchased a HP Pavilion dv6-7043cl laptop and have noticed that the battery does not charge unless it is below 95%.  I am very concercerned because I had a different laptop from a different manufacturer where I had battery issues.  That manufacturer was not helpful and I will never buy from them again.
    I have heard good things about HP which is why I decided to buy this particular machine.  However,  I have only had this machine for 3 days and now this is starting.  I cannot find a Win 7 (I am running Win 7 home premuim 64 bit) setting that controls when the battery starts to charge.  Is this a function of the HP Power Manager?  Is this a feature of the battery HP ships with their laptops?  Or is this indicating a problem with this machine?   I am a college student and I need a reliable laptop for school. 
    Any information you can provide is greatly appreciated.
    Thanks,
    HanNan
    This question was solved.
    View Solution.

    Hi,
    This feature is intended by design in order to reduce unecessary charge/recharge cycles - reference to this can be found in the 5th paragragh in the document below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00287805&cc=us&dlc=en&lc=en
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1212 I am trying to restore a phone that the screen does not work on, therefore I can't input my password.  How can I bypass this and upload it to itunes?

    I am trying to restore a phone that the screen does not work on, therefore I can't input my password.  How can I bypass this and upload it to itunes?

    You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.

  • Hr_maintain_masterdata showing an infotype that the user does not have auth

    subject: hr_maintain_masterdata showing an infotype that the user does not have authorisation for
    Hi all,
    I've a user account that's meant to perform staffing, based on the actual HR role.  The system is also set up with an infogroup that contains infotypes 0000, 0001, 0006, 0185, XYZ and other infotypes; XYZ representing an actual infotype.  The HR role is not supposed to have this infotype XYZ.
    When PA40 is used, infotype XYZ will be skipped, as the user account do not have authorisation for it.  I could then proceed to create the record.
    When the fm: hr_maintain_masterdata is used, I was prompted that I do not have authorisation for infotype XYZ.
    I have setup my fm with the mininum amount of values, as indicated below.
    I did not populate a table for "proposed_values" so the infotypes called were due to the actions of the infogroup.
    fm: hr_maintain_masterdata
    pernr = 01234567
    massn = 01          (new staff)
    actio = INS          (insert record)
    tclas = A          (master record)
    begda = 01.09.2010
    endda = 31.12.9999
    werks = myCompanyPlant
    dialog_mode = 2     (online)
    luw_mode = 1          (commit, if no errors encountered)
    no_existance_check = X
    Q. Is there any way to let the function module call the infotypes, with authorisation checks, as what PA40 is doing?
    Your guidance would be appreciated.
    Thank you,
    James Wong

    A behaviour that has been observed was that, after infotype 0185 was saved, the function module throws me back to infotype 0000, citing, "No authorization to maintain XYZ exists".  Data that I had populated to the screen, either via the FM or by manual input were cleared.  If I skip the next 4 screens, I'll arrive at the Infotype after XYZ, with the data populated.  Subsequent infotypes also have their data filled in.
    Once I complete the sequence, the personnel record will be created.  Upon examination, the frist 4 screens that were skipped in the 2nd pass contains data that were entered in the 1st pass.
    My question, as posted in the original post, is why infotype XYZ is triggered by the function module, as the staffing account does not hae access for it.  If I repeat the process using PA40, the infotype is skipped accordingly.
    Any help would be appreciated.
    Thank you,
    James Wong,

Maybe you are looking for

  • IPod Touch 4th Gen not recognized by iTunes

    Lately, since i updated to iTunes (6/30/14), I never could have my iPod be recognized by iTunes.  It is recognized by my PC and the charger works perfectly in the wall, but i can't sync my iPod to my PC.  HALP

  • System won't start - Error 0xc000014c and System Repair fails to work.

    Hi, I am running Windows Vista Home Premium x64 on my Dell Inspiron 1520 Notebook and I had to force shut down the computer yesterday because it was unresponsive (Programs wouldn't execute, shut-down didn't work). When I turned it back on I got an er

  • Credit block at delvery level & billing level

    Dear Friends, if in case of emergency i want to deliver the certain product, but there is customer due, because of credit block then is it possible to prepare the billing document and accounting document for emergency.....? its very urgent... points

  • Receiving video optimizing message on hbo.go and the video never loads - how to fix

    Windows 7, 64 bit, firefox 27.0.1., shockwave flash 12.0.0.77. I have been trying to watch content on hbo go. It hasn't worked since last summer. I am able to select a show, but it gets stuck with a 'video optimizing' message. I've been searching for

  • LU allocate xlate failed

    I have two ASA5510 firewalls Cisco Adaptive Security Appliance Software Version 8.4(4)1 Device Manager Version 6.4(9) Compiled on Thu 14-Jun-12 11:20 by builders System image file is "disk0:/asa844-1-k8.bin" Config file at boot was "startup-config" f