Is anyone else having more then one problem with this phone? (BBSTYLE)

I've always wanted a blackberry phone, and  about 4 months ago I finally did. 
Purchased a brand new blackberry style, I was very excited about this purchase. 
Anyways, the first 2 weeks were great, then all these problems started to happen..  
Since then every month a new problem occurs. 
-the phone freezes. (a lot)
-the internet (while refreshing or what I like to call it "thinking") completely closes, and erases everything. 
-While using the phone for a call the back of the phone( where the battery is) heats up, to the point where it is too    hot to handle. 
- the track pad, gets way to sensitive then gets all crazy on me when IM scrolling up or down on a website, or in a text message. 
- the wifi does not even want to try and connect. 
- then, just recently, i'm not receiving some texts, and missing very important calls.
I'm seriously unhappy, because the knowledge  I have about blackberry products (and what it says on the outside of the box) is that this phone is for the busy business person, and I have to wait ten minutes for the phone to start acting right to put in a contact in the address book. 

I just bought this phone seven months ago (swapped out a different BB model for "Style", and I'm still unhappy), and it freezes up ALL THE TIME now.  It'll freeze up for days on end. I can't live like this anymore.  The tech support group said that they'll have to "restore it to factory settings", meaning I'll lose ALL the data I have stored, including all the notes, info, on my Notes Pad under Application. If the phone ever allows me to get to that icon again, I'll have to transfer all of that data to my desktop before I allow them to restore it to factory settings.
But the real issue is is that THIS SHOULD NOT BE HAPPENING in the first place.  They make absolutely no apologies for it. I'm reading here that SEVERAL models have the problem of freezing up.  This is the last time.  When my contract is up, I am DEFINITELY switching to a Galaxy IIS.  This is no way to deal with a supposed "smartphone".  Research in Motion should be issuing new phones to EVERYONE for the trouble they're causing.  The blue cursor/whatever will NOT travel down to the buttons, so, I can't access ANYTHING  on my phone. I can't get to contacts, I can't get to my emails, nothing.  I have to repeatedly hit the BlackBerry icon, and get to certain areas completely backward, but it's still not functioning 1% of what it should be.  I can't scroll around anywhere...not up and down my inbox, on the home page, nothing.  What the hell is wrong with them?  Don't they do any product testing???  I'm  in marketing, and this company, and their products, SUCKl.
If anyone has any advice other than remove the battery and pop it back in after X amount of time, let me know.  I've had the battery out for one minute as well as overnight....the phone has stopped now for 55 hours, and I'm sick of it.

Similar Messages

  • Anyone else having Safari and iCloud problems with 10.7.2 on iMac?

    After upgrading to 10.7.2, I'm having intermittent problems with Safari not connecting to websites. Also, iCloud crashes and hangs when I select the address book. This is on a brand new iMac 2.5 core i5 with no third party web software or plugins (flash, etc.).
    Apple care hasn't been much help to me with some other issues I've had, so I thought I'd seek out answers here.
    Thanks,

    Bump,
    No one else is having problems with iCloud hanging?
    My safari seems fine now, but iCloud is unusable.

  • Having a lot of problems with this phone

    I have been dealing with their technical support since june with my phone and they are RUDE and will not help me to get me another phone ... When my phone rings the 2nd one mind you  it will ring then it goes silent and then rings again , and sometimes the phone will not ring at  all and unless someone leaves me a voicemail it will not show up as a missed call. I'm sick of dealing with this 5 and dealing with these rude people and the play store just opens by itself really ok but they are telling me its not a problem with the system well then whats the problem ..... i hate this phone..

    I finally got to talk to a nice person this time one that listened and he said it was a hardware issue. So he sent me out another phone thank goodness. But I was thinking about taking it to the store. If I couldn't get anywhere again. So we shall see what happens when I get the other phone. I do have my contacts backed up to Google . thank you very much for the information. ☺

  • Has anyone else had a screen separation problem with the ipad?

    Has anyone else had a screen separation problem with the ipad?

    Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
    Regards.

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • Is there a way to pair more then one set wireless head phones to either a iphone or ipad with the blue tooth?

    Is there a way to pair more then one set wireless head phones to either a iphone or ipad with the blue tooth?

    Yes. I have two different Bluetooth headsets and they are both paired to my iPhone so I can use either one but only one can be used at any one time.
    To pair the second one, simply repeat the pairing process that you used for the first one.

  • Object would have more then one attribute with the tag :VALUE

    I'm creating a new component in Ultiboard - a 100 pin connector.  This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
    When I change the VALUE or NUMBER attribute, I get the DRC error  message:
    This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
    Please remove one of the attributes and try again.
    Okay, so I've tried deleting the tag and now I can't name the pin at all. 
    What am I missing?

    You should be in the footprint editor to edit the pin name.  Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon.  In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.   
    Tien P.
    National Instruments

  • OVI and syncing and having more then one phone

    I recently just upgraded my wife and my phones to Nokia 6350's, after backing up all my contacts and everything in Nokia's PC suite from the old phones and after activating the phones and restoring the back up to the new phones I saw there was an update suggestion to the PC suite which was OVI.
    I thought great maybe more function Etc..
    After downloading and finally figuring out how to put my phone number in in international format, I get it registered logging into my wife's phone first, from inside the app, I added my phone to it, but it didn't as me for the phone number or anything, but allowed me to change from one phone to the other, well when I hit the sync button for my phone it connected to my phone then added all my contacts to the existing contacts of my wife's, what I didn't relies at first it also put all my wife's contacts into my phone book on my phone, this is a major bug that shouldn't be allowed, Why would I want my wife's contacts in my phone???
    Well lucky for me since I had just backed up all my contacts separately,
    I closed out OVI and started PC Suite up, I wiped out my whole contacts and reloaded them from back up,
    What I can't figure out is why would they design their program like this that doesn't seen to allow you to manage multiple phones from the same program,
    Nokia's PC suite does this part great, as it keeps each phone totally separately.
    The other thing I don't care for is that OVI seems to depend on having an internet connection, which there are people out there that would like to manage their phones without having to have this, PC suite can be used without a internet connection.
    Does anyone have any idea on how to separately manage more then one phone in OVI?

    Set up a user account in Windows for your wife on the same computer and when syncing her phone set up and run Ovi Suite from that account.
    It is easy and once one gets used to it it gives great flexibility.
    This is not just a Nokia thing but quite a normal way of managing multiple devices for multiple users in Windows applications (e.g. we use an application that remote controls multiple telecommunications devices for multiple users and it manages them in that same way except it goes further and requires a separate account for each device as well as each user).

  • Is anyone else having any of these problems?

    Ever since the new update (current version is 5.0.1), there have been many problems with my ipod.
    1. The sync screen doesn't show up when I add songs to my ipod from itunes. Actually, I can use the ipod when it is plugged in. It never did this before.
    2. My ipod's playlists don't show up in itunes, and neither do the ratings of my songs.
    3. When I add songs to my ipod or change a song's rating, the ipod randomly updates files. This updating doesn't change any of my music, but it DELETES all of my playlists, which is very annoying.
    Is anyone else having these problems?
    Does anyone know what is causing it? Could it be the new update?
    P.S., I have automatic syncing turned off, because it was deleting my playlists. But itunes still deletes my playlists, even though syncing is manual.
    I tried restoring it, too.

    I have a problem kinda similar to that youre not the only one

  • HOW DO I USE MORE THEN ONE ITUNES WITH MY IPHONE WITHOUT ERASING MY MUSIC?

    I have two different laptops with iTunes on it. I use both of them but my iPhone only works with one iTunes. I plug it into the computer and it says that my iPhone cannot use more then one iTunes. Is there a way I can use both or no?
    YES I AM CLICKING MANUELLY ADD SONGS TO MY iPhone.
    I just bought my iPhone about a week or so ago.
    Please help ASAP.

    I clone my library to a portable drive using SyncToy 2.1, a free tool from MS. I run this both at home & work so that I essentially have three identical copies of my library for backup redundacy, any of which I can use to update my iPods and my iPhone. I use iTunes Folder Watch occasionaly in case I've managed to download, for example, a podcast at one location but overwrite the library with a newer copy updated at the other. It can be done but you need to take considerable care...
    tt2

  • Is anyone else having these iOS 6 problems on their iPhone?

    I've been notciing this more and more lately. When ever I'm using my phone its become exteremly laggy and it freezes up a lot more than when I first got the phone. Also sometimes my text notifications wont pop up and I would have no idea if I would get a text. Also does anyone have the problem when you get a text or just want to turn on the phone to the lock screen the phone just stays black? I press every button and the phone just doesn't turn on. These problems keeps increasing as the days go on. Anyone else have these problems?

    Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new.  If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

  • Is anyone else having frequent frozen editor problems?

    My editor freezes on me every day, at least once, and sometimes a lot more. Today it's happened 4 times. I never know when it's going to happen, but it seems to happen more often when I'm working on large files with a mix of cfscript, cftags and html syntax. To get back to work, I have to close the eclipse window, sometimes clicking the close box 2 or 3 times, then force quit the eclipse process from the task manager, and then I can restart eclipse.
    I'm running Windows 7 (x64), eclipse 3.5.1 build M20090917-0800  (x32) and ColdFusion Builder 1.0.0.263215
    I cannot start without errors that show up in my log, even after I clear it.
    I attached my log file.

    I finally solved my problems on Windows 7 64bit with the Eclipse plugin by forcing Eclipse to use the jvm.dll rather than let it use the javaw.exe executable which it uses by default.  My setup was Win7 64bit, Eclipse 64bit, and 64bit JVM.  I experienced all the problems you describe, and more, but since making this change CFB runs teriffic and I was able to turn all the crap I had turned off 'for performance reasons' back on.
    Just going to paste the blog post I made about it.  Note that this is 64bit stack-specific, and that CFB standalone is 32bit, so if you want to try this on the standalone install you'll need to make sure you've got a 32bit JVM (one comes with standalone, but you can install a newer one from www.java.com as well).  I haven't tried this with standalone, only the Eclipse plugin, but if you're experiencing similar issues you might get the same benefit by doing the basics of what's outlined below:
    Original url: http://www.websolete.com/posts/cfbuilder-2-performance-problems-on-windows-7-64-bit-solved
    For those of you that continue to experience hangs and massive slowdowns running CFB on Windows 7 64bit, the one thing I found that made all the difference in the world is to have Eclipse use the jvm.dll rather than javaw.exe (the default).  I’m using the CFB plugin into Eclipse, but I suspect this may also apply to CFB standalone on Win7 64bit as well.  No amount of configuration changes, switching between 32 and 64bit JVM/Eclipse or disabling of features made any difference to the significant performance problems I was continuing to experience UNTIL I explicitly had Eclipse start up using the dll (forcing the JVM to load within the Eclipse process). 
    I also found that simply adding the –vm argument to the eclipse.ini apparently doesn’t work when trying to specify a specific JRE to use (at least on my machine); regardless of the existence of this argument in the ini file, it will still always fire up C:\Windows\System32\javaw.exe, which is where the problems I was seeing are (high CPU utilization, memory consumption). Not sure why that argument is ignored, perhaps a path issue, but I found that the only way I could be certain that I could run Eclipse with a specific JRE was to invoke Eclipse with the –vm command line argument.
    I removed all my old JRE installs and installed the most recent 64bit JRE to C:\Java\64bit\.
    What didn’t work:
    I first tried updating eclipse.ini with:
    -vm C:\Java\64bit\jre6\bin\javaw.exe
    but found that Eclipse was still invoking the C:\Windows\System32\javaw.exe for some reason.  Eclipse started of course, and the javaw.exe process started going bananas again every time I would try to edit a file and *change the value of an html input tag* of all things – as soon as I changed the input value by adding one letter (even before saving) the javaw.exe process would immediately start eating cpu and memory, and I could repeat this problem consistently across multiple files.  Eclipse would hang, and I’d have to forcibly kill it as it would never recover.
    I then tried invoking Eclipse with the command line –vm argument, like so:
    D:\eclipse\eclipse.exe -vm C:\Java\64bit\jre6\bin\javaw.exe
    leaving all the other arguments alone in the ini file; now, I could see that it was definitely using this particular javaw.exe but had exactly the same behavior I described above, edit a file (local filesystem, not network just to clear that it isn’t network related) and javaw.exe freaked out and Eclipse hung until forcibly killed.
    I then tried changing the –vm argument in the eclipse.ini file to:
    -vm C:\Java\64bit\jre6\bin\server\jvm.dll
    When Eclipse started it still had fired up javaw.exe in the Windows system32 directory as above. Whatever.
    What worked:
    Finally, I invoked Eclipse using the command line –vm argument pointing to the JRE’s jvm.dll, like so:
    D:\eclipse\eclipse.exe -vm C:\Java\64bit\jre6\bin\server\jvm.dll 
    and holy crap, it runs great.  Responsive, no appreciable sluggishness, I even turned a bunch of the code assist and insight features back on in light of how great it works now.  Because javaw.exe isn’t running I have seen none of the problems I had when using the default invocation.  I don’t understand why this option isn’t talked about more (I recall seeing only one reference to it in all the stuff I read), nor why it works better for me than the default javaw.exe but I’ve been running it all day now and it has been working terrific so far.
    So, if you’re on Win7 (or maybe even Vista) 64bit, have a 64bit JVM and 64Bit Eclipse and are seeing crappy performance or stability, try this method and see if it doesn’t solve your problems.  Off now to uninstall IntelliJ and Komodo trials ….

  • More than one problem with messages app

    I'm trying to get this Messages app to work properly on my iphone and macbook pro.  I have a few problems that are just very annoying and I can't seem to figure out what I am doing wrong.  I'm sure it is some stupid setting I am overlooking, but I have exhausted my brain for the day. 
    1st problem - I can send and recieve messages on my mac and iphone.  That works fine, but there are no notifications on my mac when I send a message from my iphone.  The message shows up in the app, but it doesn't give me a notification or a badge that there are new messages.  I have it turned on in the settings, but it just won't work...
    2nd problem - My phone is the only one that is working.  My whife has been sending me imessages from the other room for the past hour testing out the app and I get the messages on my phone, but none are showing up on my mac.  I thought they were supposed to go to both?
    I really hope someone can help me here.  I am very frustrated with the whole thing. 

    HI,
    On the iPhone in Settings > Messages > Received At > Caller ID there should be two "IDs"
    One is the iPhone's own number and the other should be the Apple ID.
    If the Apple ID is ticked then iMessages sent from the Phone should sync to the Messages app.
    However incoming iMessages to the iPhone via it's Number will not sync to the Messages app.
    This is apparently coming with the iOS 6 release.
    For the Messages App check System Preferences > Notification and the app name and check if it supposed to be using the Dock badge, make sound or display Notifications (Alerts or Banners)
    10:11 PM      Friday; August 10, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Supporting more then one system with Mac

    I have 2 other people in my household and they sign on to my network with no problem, if I try to sign on while they are on I can't...I have been told by verizon and Belkin both that is not my router,,,Why can't I signon when anyone else in my house uses my network??

    ....but Macs don't have this problem!
    Why Windows?
    I'm afraid of someone running into the same problem as ed2345 in my house. I am the only Admin (for a good reason) and my account is password protected. So a restart would be required if I am not there to take care of it.

  • Is anyone else having table border rendering problems in Firefox 3.6.7 for Mac?

    I recently applied a Mac Firefox update (not sure which one, but I'm currently on 3.6.7) that introduced some strange table border rendering behaviors. Long story short, on certain pages that I visit regularly, the right-most table borders are now rendering erratically. The problem does not occur in Safari or Chrome on Mac, nor does it occur in IE or Firefox on Windows. Seems specific to Mac Firefox.
    To reproduce, using Firefox 3.6.7 on Mac, browse to the following URL:
    http://www.relativityreport.com/?page_id=963
    ...and note the erratic rendering of the right-most table cells on the page (you may need to scroll down to the bottom-most table to see the problem...but not always). They should be gray, but often appear blank (not necessarily all at once). Refresh the page a few times and note how the missing borders randomly appear and disappear. Now click your browser's back button. When the previous page has loaded, click the forward button to return to the affected URL. Note now how all cells render correctly.
    Thanks!

    I am also getting a similar error. When I increase the border width to 2px or more it becomes sort of eroded.I am using windows 7 firefox 4. Borders seem fine in all other major browsers including IE9.
    [http://year3.masterspokerleague.com/index.php?option=com_poker&view=overall&season_id=2 Example] http://year3.masterspokerleague.com/index.php?option=com_poker&view=overall&season_id=2
    Any ideas?

Maybe you are looking for