Is crossdomain.xml Needed for SOAP Web Services?

A Flash developer who is attempting to use Flash to access a
SOAP web service provided on one of our servers says we need to add
a crossdomain.xml file to our server listing their domain as an
acceptable source. The SOAP service simply accepts some data and
returns a status. It doesn't make sense to me that we would need to
provide a crossdomain.xml file. If we did, all web services all
over the Internet would have to do the same to allow Flash to call
them.
If I am correct and the file is not necessary, then what else
in FlashPlayer might be blocking their attempts to access our
server? I don't know much about Flash, but I do know some sort of
security configuration files are necessary to allow SWF files to
access the Internet. Could this be what they are missing?

low_right wrote:
> A Flash developer who is attempting to use Flash to
access a SOAP web service
> provided on one of our servers says we need to add a
crossdomain.xml file to
> our server listing their domain as an acceptable source.
The SOAP service
> simply accepts some data and returns a status. It
doesn't make sense to me
> that we would need to provide a crossdomain.xml file. If
we did, all web
> services all over the Internet would have to do the same
to allow Flash to call
> them.
>
> If I am correct and the file is not necessary, then what
else in FlashPlayer
> might be blocking their attempts to access our server? I
don't know much about
> Flash, but I do know some sort of security configuration
files are necessary to
> allow SWF files to access the Internet. Could this be
what they are missing?
>
>
Yes, you need a crossdomain.xml file in place. When I do SOAP
calls to
a service not under my control I just write a proxy for it,
then I don't
need to have anyone add the crossdomain policy file.

Similar Messages

SOAP vs. XML-RPC for synchronous Web Services applications

Hi everyone, I have to finish one project soon and I have to make a decision. Because I don't have much time I want to ask if anyone can answer me, what are the major differences bettween SOAP vs. XML-RPC for synchronous Web Services applications. I'll be very grateful if you help me!
Thanks in advance!

Come on guys i know you can help me, please don't hesitate to write some row

Parsley Dynamic Command & Dynamic Object for Soap web services

Hi,
    <fx:Declarations>
        <s:CallResponder id="getSearchEngineForReferencePageResult"/>
        <lawpadcommunicationservicesport:LawPadCommunicationServicesPort id="lawPadCommunicationServicesPort"
                                                                         result="lawPadCommunicationServicesPort_resultHandler(event)"
                                                                         fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        <s:CallResponder id="getBasePathForFileDownLoadResult"/>
        <lawpadcommunicationservicesport:LawPadCommunicationServicesPort id="RefLawPadCommunicationServiceGetBasePath"
                                                                         result="RefLawPadCommunicationServiceGetBasePath_resultHandler(event)"
                                                                         fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        <s:CallResponder id="getXmlPathLinkResult"/>
        <xmlpathcommunicationport:XmlPathCommunicationPort id="xmlPathCommunicationPort"
                                                           fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
    </fx:Declarations>

Hi,
I am new to Parsley.....
Can u refer me some link to understand all features of Parsley.
Mainly Dynamic Command and object for soap web services....
I am in confused state with the usage of dynamic command and object for Soap web services.
<fx:Declarations>
        <s:CallResponder id="getSearchEngineForReferencePageResult"/>
        <lawpadcommunicationservicesport:LawPadCommunicationServicesPort id="lawPadCommunicationServicesPort"
                                                                           result="lawPadCommunicationServicesPort_resultHandler(event)"
                                                                           fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        <s:CallResponder id="getBasePathForFileDownLoadResult"/>
        <lawpadcommunicationservicesport:LawPadCommunicationServicesPort id="RefLawPadCommunicationServiceGetBasePath"
                                                                            result="RefLawPadCommunicationServiceGetBasePath_resultHandler(event) "
                                                                           fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        <s:CallResponder id="getXmlPathLinkResult"/>
        <xmlpathcommunicationport:XmlPathCommunicationPort id="xmlPathCommunicationPort"
                                                            fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
</fx:Declarations>
Thanks & Regards

Mapping DTO to XML Schema for Worship Web Service

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

Mapping DTO to XML Schema for Workshop Web Service

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

CF 9 and serializing CFCs for SOAP Web Services

I've noticed after upgrading to CF 9 from CF 8 that the name of any CFCs being returned are now being capitalized in the generated WSDL document and in the SOAP response. This was not the case in CF 8, and is breaking clients written in case-sensitive languages (in this particular case, .NET).
I'm wondering if anyone else has experienced this problem, and what resolutions may have been found.
Here is an example
foo.cfc:
<cfcompont displayname="foo">
     <cfargument name="getBar" access="remote" returntype="bar" />
     <cfreturn new bar() />
</cfcomponent>
bar.cfc
<cfcomponent displayname="bar">
     <cfproperty name="name" type="string" />
</cfcomponent>
In the wsdl generated by CF 8, the complexType is named 'bar'. In CF 9, it's named 'Bar'. The same happens in the returned SOAP response.
Thanks.

Did you run on CF 8.0.1 or CF 8? Some further digging suggests that this might be an 8.0.0 vs. 8.0.1 issue. Here is some "code" that will produce a WSDL in 9.0.1 and 8.0.0
Soap.cfc:
<cfcomponent output="false">
     <cffunction name="getObject" returntype="object" access="remote">
          <cfreturn createObject("component", "object") />
     </cffunction>
</cfcomponent>
Object.cfc:
<cfcomponent displayname="object">
     <cfproperty name="name" type="string" required="true" />
</cfcomponent>
WSDL produced by CF 9.0.1:
<wsdl:definitions targetNamespace="http://soaptest" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://soaptest" xmlns:intf="http://soaptest" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns1="http://rpc.xml.coldfusion" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">

<wsdl:types>
<schema targetNamespace="http://soaptest" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://rpc.xml.coldfusion"/>
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<complexType name="Object">
<sequence>
<element name="name" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
</schema>
<schema targetNamespace="http://rpc.xml.coldfusion" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://soaptest"/>
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<complexType name="CFCInvocationException">
<sequence/>
</complexType>
</schema>
</wsdl:types>
<wsdl:message name="getObjectRequest">
</wsdl:message>
<wsdl:message name="CFCInvocationException">
<wsdl:part name="fault" type="tns1:CFCInvocationException"/>
</wsdl:message>
<wsdl:message name="getObjectResponse">
<wsdl:part name="getObjectReturn" type="impl:Object"/>
</wsdl:message>
<wsdl:portType name="Soap">
<wsdl:operation name="getObject">
<wsdl:input message="impl:getObjectRequest" name="getObjectRequest"/>
<wsdl:output message="impl:getObjectResponse" name="getObjectResponse"/>
<wsdl:fault message="impl:CFCInvocationException" name="CFCInvocationException"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="soap.cfcSoapBinding" type="impl:Soap">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getObject">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getObjectRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://soaptest"use="encoded"/>
</wsdl:input>
<wsdl:output name="getObjectResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://soaptest"use="encoded"/>
</wsdl:output>
<wsdl:fault name="CFCInvocationException">
<wsdlsoap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" name="CFCInvocationException"namespace="http://soaptest" use="encoded"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SoapService">
<wsdl:port binding="impl:soap.cfcSoapBinding" name="soap.cfc">
<wsdlsoap:address location="http://lcmswindows/soapTest/soap.cfc"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
WSDL produced by CF 8.0.0
<wsdl:definitions targetNamespace="http://soapTest" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://soapTest" xmlns:intf="http://soapTest" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns1="http://rpc.xml.coldfusion" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">

<wsdl:types>
<schema targetNamespace="http://soapTest" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://rpc.xml.coldfusion"/>
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<complexType name="object">
<sequence>
<element name="name" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
</schema>
<schema targetNamespace="http://rpc.xml.coldfusion" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://soapTest"/>
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<complexType name="CFCInvocationException">
<sequence/>
</complexType>
</schema>
</wsdl:types>
<wsdl:message name="CFCInvocationException">
<wsdl:part name="fault" type="tns1:CFCInvocationException"/>
</wsdl:message>
<wsdl:message name="getObjectResponse">
<wsdl:part name="getObjectReturn" type="impl:object"/>
</wsdl:message>
<wsdl:message name="getObjectRequest">
</wsdl:message>
<wsdl:portType name="soap">
<wsdl:operation name="getObject">
<wsdl:input message="impl:getObjectRequest" name="getObjectRequest"/>
<wsdl:output message="impl:getObjectResponse" name="getObjectResponse"/>
<wsdl:fault message="impl:CFCInvocationException" name="CFCInvocationException"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="soap.cfcSoapBinding" type="impl:soap">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getObject">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getObjectRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://soapTest"use="encoded"/>
</wsdl:input>
<wsdl:output name="getObjectResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://soapTest"use="encoded"/>
</wsdl:output>
<wsdl:fault name="CFCInvocationException">
<wsdlsoap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" name="CFCInvocationException"namespace="http://soapTest" use="encoded"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="soapService">
<wsdl:port binding="impl:soap.cfcSoapBinding" name="soap.cfc">
<wsdlsoap:address location="http://dev.m5.dominknow.com/soapTest/soap.cfc"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
I've highlighted the relevant differences. I don't have a server running 8.0.1 at the moment. Customers running MX 7 have the same (lower case) WSDL as 8.0.0. I've had some correspondance with others that suggests 8.0.1 behaves the same as 9.0.1. I've actually been able to find a blog post suggesting there was a change to WSDL generation in 8.0.1 with a link to an Adobe forum thread, but that thread no longer seems to exist. The blog post:
http://blog.coldfusionpowered.com/?p=28

Need to auto-generate SDK for REST web service.

My company has developed a REST API for some web services, and we'd like to provide users with a Java SDK for consuming those services.
Our services are described by an XSD schema. On the backend, we are using JAXB to create Java classes corresponding to the schema. We create the request objects based on the parameters in the REST url, and JAXB converts our response objects from Java to XML.
We'd like to provide our users with similar Java classes on the client side. They should be able to create the object corresponding to the request, fill in various parameters, and submit it to our web service. The SDK should automatically convert the object into a REST URL, hit the URL with a Get, read the XML response, and convert that response into Java objects.
It seems like we should be able to auto-generate such an SDK based on our schema.
It seems like there are several tools for doing this for SOAP web services. For example, Apache Axis has Java2WSDL and WSDL2Java.
Can anyone recommend tools for creating client-side libraries for consuming RESTful web services? Does anyone have advice on products to avoid?

Replying to my own post here. The WADL2Java project on java.dev seems to be more like what I need. The only user-experience I've seen on the 'net is in this forum post:
http://forum.java.sun.com/thread.jspa?threadID=5239123&tstart=0
Anyone else used it?

Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file

Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
web application’s User Policy. I can use these services just fine using Nintex 2013 Workflow.
Open InfoPath Designer 2013.
Select Blank Form and click Design Form button.
Click “Data” tab.
Click “From Web Service” and select “From SOAP Web Service”
Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
Click Next.
Windows Security window pops up.
Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
Click OK. It prompts for credential multiple times.
I get below this error messages:
Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
InfoPath cannot find or cannot access the specified Web Service description.
The file is not a valid XML file.
Not enough storage is available to process this command.
We have a project that is in need of these services using InfoPath so any help is greatly appreciated.

Hi Brian_TX,
For your issue, try to the following methods:
Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
Replace all instances of "parameters" from the web service wsdl with the name "parameter"
There are some similar articles about the issue, you can have a look at them:
http://www.infopathdev.com/forums/t/23239.aspx
https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
Best Regards
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Help NeEDED. How to link to soap web service from objective c

Hello , HELP
I'm trying to connect to a SOAP based web service using objective C as my programming language. Although the little bit of information on the Apple Dev centre documents is should be straight forward, im struggling like **.
What im trying to do is connect via a small username and password text-box plus 'login' button from interface builder to
https://api.betfair.com/global/v3/BFGlobalService.wsdl and parameter called login.
then pass it my username and password from the interface text-boxes plus a few other standard set bits of information which are required.
in turn the soap request will pass back a session token which i need to store.
I've tried using WSMakestubs, which builds successfully the classes, but when calling them method nothing happens.

Hello Etresoft
Thanks again for coming back to me.. I would like to add that maybe on my first thread i wasn't as clear on what i was asking for, and also what avenues have have stepped down before asking for help.. Believe me i hate nothing more than not being able to resolve something myself. I'm currently reading 'another' programming in cocoa book by Arron Hillgrass, although he touches on the web service call to a Amazon web service example, he doesn't go into detail about how to actually do this.
So again thank you for trying to help me.. its greatly appreciated.
Ok back to the subject, and your response below.. I will try and be as informative as i can.
I'm want to create a application using the interface builder which has a username and password textfield plus a button called <login>..
On entering the username and password and pressing the login button, i was to send a request to the a .wdsl (SOAP) web service and login.! the webservice in return will send back a session token, which i need to store for further web service calls.
In xcode i have been trying now for 1 week..!!! and the more i read up on how to make the Soap request call the more i fail to understand if this is simple or complex.
* A bit more info if i may, on clicking the login button i need to send information to the below address as a soap type request.
https://api.betfair.com/global/v3/BFGlobalService.wsdl
i need to also tell the request the method name which is loginreq
and also i need to pass these parameters in the request.
username (from textfield)
password (from textfield)
productId = '82'
vendorsoftwareId = '0'
locationId = '0'
ipAddress = '0'
The stage I've got to is, I've used wsmakestubs and I've tried 'wdsl2objc' to create the classes required. I have then created a app controller class and a interface build app with the textfields and login button. I have then linked up the textfields and button to the nsobject appcontroller with a action ibaction loginreq etc. On build and go the app builds without error's but fails to do anything when i press the login button.. (more i think about this the more i think its either two things, one im not passing the parameters and two im not invoking the loginreq method from the class.)
I feel like im wading in treacle and getting nowhere fast.!
All i would like is for some help from someone to point me the correct direction..
Im thinking that with all the Soap web services out there in the WWW, this must now be a easy thing to do in xcode. Im starting to think im stupid..
Thanks again for you Help
Regards
Iain Smith
[email protected]

Creating SOAP Receiver comm.channel for axis web service

Hi,
I created Soap Receiver comm. channel fro Axis web service like below:
*Target URL* : http://<IP>:<Port>/<x>/service
*User:* <user>
*Password :* <password>
*SOAP Action:* <target namespace>/method
when i drive PI Message that use Soap Receiver it get error below
I do same method for .Net web service, it runs properly.
How can i solve this problem?
Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did all but nothing changed?
I have doubt about axis side. Because respose like below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
May be Soap Receiver setting for axis web service must be different.
Thanks.

Best SOAP Web Services Architecture for E-Commerce

Hi there,
I have developed an E-Commerce system following the normal way of
developing Java web applications (all classes and JSP files in one Eclipse web project).
I want to modularize the application, I want to split the application into
two applications:
1. The core app, with SOAP web services methods
2. The client (front-end JSP files and some servlets to request/receive responses from the SOAP web services core app)
Basically, I want the servlets in the client app to call the core SOAP web services app for data such as
get product by ID, get customer by ID, etc...
The core SOAP web services app would then return a response in an XML format, which I then
would map to Java objects at the client application.
My questions are:
1. Is this the right way to go?
2. Where should the session management be? At the client app?
Hope you can help?
I have been thinking about a proper architecture for 2 years and honestly it's been giving me sleeping problems.
Thanks!

It works. Thanks,
Ioana
"Neal Yin" <[email protected]> wrote:
The error means your EJB is not deployed.
Adding a EJB module to your application.xml file of the ear should fixe
it.
<application>
<display-name />
<module>
<web>
<web-uri>dox_sdi.war</web-uri>
</web>
</module>
<module>
<ejb>DocumentService.jar</ejb>
</module>
</application>
"Ioana Meissner" <[email protected]> wrote in message
news:3cf640cc$[email protected]..
I have used the following example for my own web service with EJBcomponent and SOAP
Message Handler Chain:
http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
I have a deployment error:
javax.naming.NameNotFoundException: Unable to resolve'app/ejb/DocumentService.j
ar#DocumentService/home' Resolved: 'app/ejb'Unresolved:'DocumentService.jar#Doc
umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
In attachement is the ear file.
Is there a problem in web-services.xml?
Thanks

How to access SOAP web service with authentication, HTTP basic Authentication

Dear All
i use Flash Builder 4.5, flex 4..1, i am developing a flex client to soap webservices hosted over Glassfish 2 Java server, the web services is protected by HTTP Basic Authentication, everythime i run my code , the prombt for username and password show up, i need to pass user name and password through action script, i followed the flollowing (but was for http web service, not soap) but really did not work.
http://stackoverflow.com/questions/490806/http-basic-authentication-wi th-httpservice-objects-in-adobe-flex-air
http://forums.adobe.com/message/4262868
private function authAndSend(service:HTTPService):void
        var encoder:Base64Encoder = new Base64Encoder();
        encoder.insertNewLines = false; // see below for why you need to do this
        encoder.encode("someusername:somepassword");
        service.headers = {Authorization:"Basic " +encoder.toString()};
        service.send();
Also i noticed in debug mode, always that WARNNING raised up
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
any idea ?

Hello,
I don't know if this could help.
Another way to connect to a web service by SOAP and WSDL is to click on the Data/Services panel, then click on "Connect to Data/Services" and then select the "Web Service" (WSDL) icon. This could help as well.

Questions on using a SOAP web service's data in a Crystal Reports report

I'm attempting to create a report using CR 2008, accessing data from a SOAP web service. I've run into a few problems, and need some advice.
1) CR doesn't seem to support WSDL files that use relative URI imports (for example, I have a relatively complicated WSDL file that imports other WSDL files and schemas using relative URI locations). To solve this problem, I have downloaded all of the files to my local hard drive, and changed the "location" attributes to point to local files. Is there any other solution to this problem?
2) CR doesn't seem to support circular references within schema files. To solve this problem, I have removed circular references from my local schema files. Of course, my actual web service will still potentially return data structures with these circular dependencies. Is there any other solution to this problem?
3) CR doesn't seem to support request documents that allow for arrays of elements. For example, my schema allows the user to specify an array of Instruments that should be returned by the web service. In the meantime, I have changed the schema to only specify single instances of the Instrument element in the request. Is there any other solution to this problem?
4) CR doesn't seem to support empty values for optional attributes that are specified in the schema. So, when the "Enter Values" parameter form appears, I am required to enter values for these attributes, even though they are listed as optional in the schema. To avoid this problem, I have commented out the optional attribute values in the schema. Is there any other solution to this problem?
5) When the schema specifies that a value is based on a restricted simple (string) type, the CR parameter form shows a drop list with ellipses (...), but the drop list does not contain the enumerated types specified in my schema. Instead, I must manually enter a value. Do you know of any reason why the drop list is not populated?
6) The SOAP response document from my web service is relatively complicated. So, in the "Data" page of the Standard Report Creation Wizard, each and every XML element level of the response document listed in the schema is shown as a separate entry. If I choose just the top level element ("fetchInstrumentSetResponse"), then very little data is shown on the next page of the wizard (only the ID attribute). But, if I select each and every element type from the response document, CR prompts me for the request document parameters for each row I have selected (I see the same form 30+ times), even though there really should only be a single SOAP request to the web service to return this response document. It seems to be treating each of these elements as a separate "database table", with a different query string for each. Am I using this feature incorrectly?
If you can point me to somewhere in the documentation that handles this in more detail, that would be great (all I could find were the step-by-step instructions on how to connect to a web service as a data source).
Thanks!

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly

Schema Data Type in SOAP Web Service while using Integration Gateway in SMP 3.0

Hi Experts,
I was working on Integration gateway component of SMP 3.0.3 where we can have oData services which connect to different data source from SMP and finally we have to consume from SMP. Here I have an SOAP Web service where there is Schema Data type which is an xml structure and because of that while doing the data modelling with Design time tools I am not able to map the properties as there aren't any as only the parent level Schema type is available in the SOAP Web Services. Please see the below image for reference :
So now I have 2 inputs no problems for design as such then I have the schema for that which comes as a output response which is where I am facing the issue as we don't have that Data Structure itself so how are we going to map that. I have seen some thin possibilities with Custom Scripts with SMP SP06 where this will help us to process the request and response at runtime with JS/Groovy. So needed some lights on this schema data type on Integration Gateway component of SMP 3.0.3 which we are planning to upgrade to SP06 as well so it will be a good starting point for this as well
Also have concerned my good friend Rakshit Doshi for this as well.
Regards,
Fenil.

Hi All,
Sorry for the late response guys was stuck somewhere else and so couldn't reply to this, see I have below response in SOAP UI
There if we see we have the schema as the whole structure being defined under which we have all the child elements, am also posting the raw response from the soapUI below for better understanding
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <GetMSUserLoginDetailsResponse xmlns="http://tempuri.org/">
         <GetMSUserLoginDetailsResult>
            <xs:schema id="MemberDetails" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
               <xs:element name="MemberDetails" msdata:IsDataSet="true" msdata:UseCurrentLocale="true">
                  <xs:complexType>
                     <xs:choice minOccurs="0" maxOccurs="unbounded">
                        <xs:element name="Table">
                           <xs:complexType>
                              <xs:sequence>
                                 <xs:element name="RECID" type="xs:string" minOccurs="0"/>
                                 <xs:element name="FNAME" type="xs:string" minOccurs="0"/>
                                 <xs:element name="LNAME" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CUSTNO" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="MEMTYP" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="MEMTYPENAME" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CUSTTYP" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="EMAIL" type="xs:string" minOccurs="0"/>
                                 <xs:element name="MEMPASSWORD" type="xs:string" minOccurs="0"/>
                                 <xs:element name="ISDEBIT" type="xs:decimal" minOccurs="0"/>
                                 <xs:element name="PARENTID" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CHILDOF" type="xs:string" minOccurs="0"/>
                                 <xs:element name="CUSTTYP1" type="xs:string" minOccurs="0"/>
                                 <xs:element name="ZONEID" type="xs:int" minOccurs="0"/>
                                 <xs:element name="EMAILFOOTERDETAIL" type="xs:string" minOccurs="0"/>
                              </xs:sequence>
                           </xs:complexType>
                        </xs:element>
                        <xs:element name="Table1">
                           <xs:complexType>
                              <xs:sequence>
                                 <xs:element name="ErrorCode" type="xs:string" minOccurs="0"/>
                                 <xs:element name="ErrorDesc" type="xs:string" minOccurs="0"/>
                              </xs:sequence>
                           </xs:complexType>
                        </xs:element>
                     </xs:choice>
                  </xs:complexType>
               </xs:element>
            </xs:schema>
            <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
               <MemberDetails xmlns="">
                  <Table diffgr:id="Table1" msdata:rowOrder="0">
                     <RECID>97101-101-0000057069</RECID>
                     <FNAME>Fenil</FNAME>
                     <LNAME>Doshi</LNAME>
                     <CUSTNO>1042231</CUSTNO>
                     <MEMTYP>42</MEMTYP>
                     <MEMTYPENAME>Management</MEMTYPENAME>
                     <CUSTTYP>8</CUSTTYP>
                     <EMAIL>[email protected]</EMAIL>
                     <MEMPASSWORD>as</MEMPASSWORD>
                     <PARENTID>97101-101-0000057069</PARENTID>
                     <CUSTTYP1>Zone</CUSTTYP1>
                     <ZONEID>2</ZONEID>
                     <EMAILFOOTERDETAIL><![CDATA[<strong></strong><br />]]></EMAILFOOTERDETAIL>
                  </Table>
                  <Table1 diffgr:id="Table11" msdata:rowOrder="0">
                     <ErrorCode>100</ErrorCode>
                     <ErrorDesc>Login Successful.</ErrorDesc>
                  </Table1>
               </MemberDetails>
            </diffgr:diffgram>
         </GetMSUserLoginDetailsResult>
      </GetMSUserLoginDetailsResponse>
   </soap:Body>
</soap:Envelope>
So we have the data but as a xml Structure which is nothing but schema and is my Eclipse while mapping while defining response type it gives me just an schema as the property.
Regards,
Fenil.

Calling a soap web service from a java desktop application

Hi,
Does anyone know how to call a soap web service from a java desktop application? I've seen examples using Apache Axis, but it sounds like Axis needs to run on a web server and we are trying to avoid that. My initial thought was that, "of course we need a web server", but I'm wondering if there is a way to do this without a web server.
Any help is greatly appreciated.
thank you,
Julie

If you are the consumer you don't need any web server. The web server is only needed in the provider end.
In java 6 there is a built in framework to call web services without the need of third parties (such as apache axis)
take a look at:
https://jax-ws.dev.java.net/guide/Developing_client_application_with_locally_packaged_WSDL.html
http://java.sun.com/webservices/technologies/index.jsp
For the provider end there is also a built in http server to expose web service via HTTP without the need to
use any external web server.
take a look at:
http://java.sun.com/javase/6/docs/api/javax/xml/ws/Endpoint.html

Is crossdomain.xml Needed for SOAP Web Services?

Similar Messages

Maybe you are looking for