Is Editable Dropdown possible(To type inside the dropdown)???

Hi
I want to create a dropdown which should be editable.
That is I should be able to type inside the dropdown, so that I can add that value also to the dropdown values.
Can any body help me to make the dropdown editable?
Thanks in advance
Smitha

Smitha (& Armin)
Even EVS will not work out of the box. If enetered value is not found in type ValueSet error will be raised.
I guess it is possible to modify solution I've described here: https://weblogs.sdn.sap.com/pub/wlg/3309. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
The only change necessary is: in EvsHelper.applyValue add new value enetered to ValueSet of type. Should work. Unfortunately, cannot test this myself right now.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Similar Messages

Declare object type inside the package

Hi,
How can I declare an object type inside the package?
CREATE TYPE TempObj AS OBJECT (
user_id number,
text varchar2(4000),
date_created DATE
This will not work if placed inside this:
CREATE OR REPLACE PACKAGE SAMPLE_PKG IS
---declaration goes here.
END SAMPLE_PKG;
I tried using the type RECORD and it worked. But I am just curious how to declare an Object. Or maybe RECORD is the replacement of Object? is this correct?
thanks,
Baldwin

The inside of a PL/SQL package should contain PL/SQL statements.
CREATE TYPE is not a PL/SQL statement. You can't create a table in package either.
If data protection is the reason that you would rather create the type inside the package, then consider using a record type as you suggested, or hiding the SQL type in a more protected schema.
Message was edited by:
jonjac

Setting the content type inside the ABAP mapping.

Hello All,
Can any one help me by telling me how to set the content-type inside ABAP mapping. I have searched a large no of blogs and help.sap.com for the same.
My requirement is I want to change the MIME type of the Main Document in side SXMB_MONI so that can change the content type of Main document which is application\xml by default.
I would appreciate an early response regarding the same.
Abinash

Hello Raj,
The output of my ABAP mapping is a flat file. So when I try to open the file with content type application/xml in the message monitor it shows the file has some error which is natural. The way to get around this problem is change the content type to application\txt from application\xml.
I am not finding an option to set the content type inside the ABAP mapping for the same.
Abinash

Determining output type inside the IDOC processing FM

Hi,
When sales order is created, ZXXX is the output type triggered which invokes the function module (FM) IDOC_OUTPUT_ORDRSP to send the IDOC. My question is how do we know which output type got triggered the execution inside the FM?
My requirement is to do some calculation only for ZAAA inside the FM IDOC_OUTPUT_ORDRSP but this same FM is triggered by many output types ZXXX, ZXYZ, ZMNO. So I want to know which output type triggered the FM. Hope I make it clear.
Thanks,
Sakthi.

dossgs
An import parameter of FM IDOC_OUTPUT_ORDRSP is the structure named OBJECT (like NAST). OBJECT-KSCHL is the message type (output type).
Regards,
zKen

The type inside the footer drops down 50 px below the bottom of page in preview mode. I already tried unchecking the sticky footer in the site properties for that master page.

I need to fix this footer text on the home page. The type on the master page is centered inside a white 50px box. But in preview mode, the line of text drops 50px down below the bottom of page. I unchecked the sticky footer in the site properties and also set the line of text as footer item. The setting was the same on my second master and it comes out fine.

Hi
The "content" div is styled to have 100px height and visible overflow. So the text is overflowing the div but the footer is "unaware" / ingoring it and positions itself after "sidebar2"
Change the height of "content" to 100% and it should work.
Kind Regards,
Alex

How would I limit the possible expense types in the dropdown for PR05

The transaction PR05 has an expense type (PTK03-SPKZL) and the users want to exclude certain values from being displayed. Can you tell me how to go about doing this?

Turns out you need a dax formulae like the folllowing
create a DAX measure that determines the Rank of each postalcode by sum of data: =RANKX(ALL(CityData[PostalCode]),[Sum of Data])"
"Now I put that measure in the map filter area and start filtering on it. This gives us only the top 2 ranked cities:"

Can an InCopy editor add, remove and edit a text frame placed inside the main story text frame?

I think I already know the answer to this which is - no. I'll explain why I am asking the question in a second, but the reason I think the simple answer is no is because - text frames are controlled by a designer in the layout file, an editor using incopy can only edit the text and images placed inside text frames, and so cannot resize them, add or delete them.
Ok, so the reason I have asked this.
Is there a way around this so that editors in incopy can edit certain types of text frame that are contained within the main text frame? I'm using these text frames to contain specific paragraph styles, giving them a boxed look and also with an anchored icon in the top left of the text frame depending on the type of paragraph it is. See screenshot as an example of a green text frame that I am using to contain paragraphs of type "tip".
If it is not possible for editors in incopy to add, edit or resize these text frames (green tip frame in the example above), then how else can I style these paragraphs to give the same visual appearance, but without the use of wrapping them in a text frame?
One (not so good) way around this is for the designer to add the text frames in the layout file after he gets the content back from the editor, then moving the "tip" paragraphs into these newly created text frames. However when the editor updates the content in incopy and gets these new text frames in their copy, they can not then delete them if they wish to, or if they add or reduce content inside of these green text frames then the frames dont grow to fit their edited content. So I dont think its a solution for the designer to control the adding, removing and resizing of these frames.
UPDATE: I have just discovered that once a text frame has been placed into the document by the designer and the editor updates their copy in incopy- they can then use the "Position Tool" to select that text frame - allowing them to resize it, or delete it! Fantastic. But would the editor be able to add these frames in themselves to begin with? Maybe have a document containing all of the objects available to them, copy and paste one of them into the main document and edit its content? Does anyone have any advice on how to go about this? Essentially I would like the editor to control the insertion, editing and removal of these inline text frames.

True. But when all I am trying to achieve is a border around a paragraph, use of a table seems overkill to me. But if thats the only solution I have so far then I will have to go down that route.
It would be useful to have an object libraries panel in InCopy so that editors can drag across predefined text frames into their doc via InCopy, but I cant see that option in InCopy. is there one? I have also thought about exporting the frames as seperate InDesign Snippets and saving them to an objects folder, then when an editor needs to insert one into their doc they simply use File > Place > "Choose required text frame snippet". However I have found that InCopy can't place InDesign snippets so that theory was a failure. Is there another format I could use to save the objects and bring them into InCopy? List below shows my findings so far for trying to save/export a text frame from InDesign and then import into InCopy:
InDesign Snippet (.idms) - can't import into InCopy
InDesign Document (.indd) - imports content as an image - only editable in InDesign
InDesign Template (.indt) - imports content as an image - only editable in InDesign
InDesign Library (.indl) - can't import into InCopy - no panel available in InCopy for object libraries (that I can see...)
InCopy Markup (.icml) - only imports the text, loses the text frame

Scrolling not possible in BSP (inside the webdynpro area)

Hi,
I am having a BSP application which has a webdynpro application embedded in it inside an IFRAME. The size of my webdynpro application exceeds the size of the BSP page and hence the vertical scroll bars appear at the right side (These are scroll bars of the BSP application).
But i am unable to scroll through the page using my mouse when the cursor is present over the webdynpro area. The same works fine if i keep the cursor over the BSP area.
Is there a way to make the page scrollable irrespective of the position of the cursor?
Thanks,
Prasath N

No solution. I am currently using the scroll bar of the webdynpro.

Display invalid pattern name while calling the procedure inside the package

Hi ,
I'am trying to call a package which is having procedure ,from JDBC in which one of the return type is Varray from the procedure.When i'am calling the procedure inside the package
from java showing invalid name pattern name.Just i'am placing the code snippet for package and calling java through package.
Package body
create or replace package body Rewards_Summary_Package as
PROCEDURE Rewards_Summary_Procedure
(v_Tot_Earned_Points OUT NUMBER, v_TOT_REDEEMED OUT NUMBER, v_TOT_PTS_EXP OUT NUMBER,
v_TOT_AVAILABLE OUT NUMBER, v_TIER_NAME OUT VARCHAR2,VA OUT t_varray,V_PR_CON_ID IN VARCHAR2) AS
v_ACCRUALED_VAL NUMBER := 0;
v_USED_VAL NUMBER := 0;
/*v_TOT_ACCRUALED_VAL NUMBER := 0;
v_TOT_USED_VAL NUMBER := 0;
V_PR_TIER_ID VARCHAR2(30);
V_PR_CON_ID VARCHAR2(30);
V_EXPIRY_DT DATE;
v_month varchar2(30);
v_date date;
v_next_month_date date;
v_TIER_NAME VARCHAR2(50);
v_TOT_AVAILABLE NUMBER := 0;
v_EARNED NUMBER := 0;
v_TOT_EARNED NUMBER := 0;
v_TOT_REDEEMED NUMBER := 0;
v_TOT_EXPIRED NUMBER := 0;
v_EARNED_TOTAL NUMBER := 0;
v_TOT_EXPIRED_MONTH NUMBER := 0;
v_TOT_PTS_EXP NUMBER := 0;
v_TOT_RDMD_CANCELLED NUMBER :=0;
v_TOT_EARNED_POINTS NUMBER :=0;*/
v_FIRST_DT DATE;
v_LAST_DT DATE;
v_MEMBER_ID VARCHAR2(30);
V_EXPIRED_VAL Number;
v_TOT_PRDPTS_RDMD NUMBER := 0;
v_TOT_PTS_RDMD NUMBER := 0;
v_CAN_ACCRUAL_POINTS NUMBER := 0;
BEGIN
/*TotalRwdPoints and Tier Name*/
SELECT TR.NAME,MEM.POINT_TYPE_A_VAL,MEM.ROW_ID INTO v_TIER_NAME,v_TOT_AVAILABLE,v_MEMBER_ID
FROM SIEBEL.S_LOY_MEMBER MEM, SIEBEL.S_LOY_TIER TR WHERE MEM.PR_DOM_TIER_ID=TR.ROW_ID
AND MEM.PR_CON_ID=V_PR_CON_ID;
vTotPrdPtsRdmd
SELECT NVL(SUM(A.VALUE),0) INTO v_TOT_PRDPTS_RDMD from SIEBEL.S_LOY_RDM_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND A.TYPE_CD='Product'
AND A.TXN_ID IS NOT NULL;
vTotPtsRdmd
SELECT NVL(SUM(A.VALUE),0) INTO v_TOT_PTS_RDMD from SIEBEL.S_LOY_RDM_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND (A.TYPE_CD='Product' or A.TYPE_CD='Transfer')
AND A.TXN_ID IS NOT NULL;
vTotRewardPtExp
SELECT NVL(SUM(A.VALUE),0) INTO v_TOT_PTS_EXP FROM SIEBEL.S_LOY_RDM_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND A.TYPE_CD='Expired'
AND a.TXN_ID IS NULL;
vCanAccrualPoints
SELECT NVL(SUM(A.ACCRUALED_VALUE),0) INTO v_CAN_ACCRUAL_POINTS from SIEBEL.S_LOY_ACRL_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRIB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND A.TYPE_CD='Cancellation';
v_Tot_Earned_Points := v_TOT_AVAILABLE+v_TOT_PRDPTS_RDMD+v_TOT_PTS_EXP-v_CAN_ACCRUAL_POINTS;
v_TOT_REDEEMED := v_TOT_PTS_RDMD-v_CAN_ACCRUAL_POINTS;
DBMS_OUTPUT.PUT_LINE(' Total Earned: '|| v_Tot_Earned_Points || ' Total Redeemed: '|| v_TOT_REDEEMED || ' Total Expired: '|| v_TOT_PTS_EXP
|| ' Balance Points: '|| v_TOT_AVAILABLE || ' Tier Name: '|| v_TIER_NAME);
select trunc(sysdate,'MONTH') INTO v_FIRST_DT from dual;
va:= t_varray(Null,Null,Null,Null,Null,Null);
FOR a in 1 .. 6 LOOP
select trunc(last_day(v_FIRST_DT)) INTO v_LAST_DT from dual;
SELECT SUM(AI.ACCRUALED_VALUE),SUM(AI.USED_VALUE) INTO v_ACCRUALED_VAL,v_USED_VAL from SIEBEL.S_LOY_ACRL_ITM AI,SIEBEL.S_LOY_ATTRDEFN A
WHERE AI.MEMBER_ID = v_MEMBER_ID AND A.ROW_ID = AI.ATTRIB_DEFN_ID AND A.INTERNAL_NAME = 'Point 1 Value'
AND trunc(AI.EXPIRATION_DT) >= v_FIRST_DT AND trunc(AI.EXPIRATION_DT) <= v_LAST_DT;
V_EXPIRED_VAL := NVL(v_ACCRUALED_VAL-v_USED_VAL,0);
va(a):=V_EXPIRED_VAL;
v_FIRST_DT := add_months(v_FIRST_DT,1);
End loop;
END;
end;
Package declaration
create or replace package Rewards_Summary_Package as
TYPE t_varray IS VARRAY(6) OF NUMBER;
PROCEDURE Rewards_Summary_Procedure
(v_Tot_Earned_Points OUT NUMBER, v_TOT_REDEEMED OUT NUMBER, v_TOT_PTS_EXP OUT NUMBER,
v_TOT_AVAILABLE OUT NUMBER, v_TIER_NAME OUT VARCHAR2,VA OUT t_varray,V_PR_CON_ID IN VARCHAR2);
end;
java code
I had tried using java types and Oracle types
conn=SiebelServiceDatasource.getConnection(SSBConstants.REWARDS_PROP_LOG_SUFIX);
// ArrayDescriptor.TYPE_VARRAY
ocstmt=(OracleCallableStatement)conn.prepareCall(" {call REWARDS_SUMMARY_PACKAGE.REWARDS_SUMMARY_PROCEDURE(?,?,?,?,?,?,?)}");
//ocstmt=(OracleCallableStatement)conn.prepareCall(" call Test_Array(?,?)");
ocstmt.registerOutParameter(1,OracleTypes.INTEGER);
ocstmt.registerOutParameter(2,OracleTypes.INTEGER);//1-616BH
ocstmt.registerOutParameter(3,OracleTypes.INTEGER);
ocstmt.registerOutParameter(4,OracleTypes.INTEGER);
ocstmt.registerOutParameter(5,OracleTypes.VARCHAR);
ocstmt.registerOutParameter(6,OracleTypes.ARRAY,"SIEBEL.T_VARRAY");
ocstmt.setString(7,contactSiebelRowId);
ocstmt.execute();
Showing the following invalid name pattern SIEBEL.T_VARRAY
Please help
Thanks in advance
Kiran

create or replace package Rewards_Summary_Package as
TYPE t_varray IS VARRAY(6) OF NUMBER;
end;You've declared your type inside the package. You need to declare it as a SQL type, which is not part of a PL/SQL package.

After editing an image in Photoshop it appears grayed out inside the media browser

After editing an image in Photoshop it appears grayed out inside the media browser when I try to import into Facebook (ie.).
What has to be done in order for me to be able to select my edited images from Photoshop whithin any media browser?

function(){return A.apply(null,[this].concat($A(arguments)))}
LarryM01 wrote:
...save it as sRGB?
Would you care to comment on why there is an advantage to do this little extra job?
Perhaps you don't want to hear from me, I don't know.
I'll answer just this one little question. Try to get your mind around what color management does, I promise it does make sense (outside of unexplained problems on particular computers).
You want to save your web image with the sRGB profile embedded because some Internet browsers are color managed, and with an embedded profile it's more likely someone will see your image colors just as you intended.
The assumption is that a lowly windows user with a cheap monitor and Internet Explorer will be seeing any image you save as "roughly" sRGB anyway. Tagging the image with sRGB only affects those with color-managed browsers.
You're looking for the most possible consistency for the viewing audience.
-Noel

I have a Wordpress site. I wanted to add a new page to it. However, when I try, I am able to type inside of the "Title" box & I am able to type inside of the

I have a Wordpress site. I wanted to add a new page to it. However, when I try, I am able to type inside of the "Title" box & I am able to type inside of the "Post Excerpt (Meta Description)" box. However, I cannot type inside of the main body box where the actual content of my page would appear.
This seems to be a browser issue because I can do it if I use Internet Explorer. Why does Firefox prevent me from editing or adding a new page to my Wordpress site?
Thanks.

Hi,
try
help -> restart with add-ons disabled.
Regards
'''Deepak Krishnan P.R'''

Editing swfobject.js code so hyperlinks inside the flash widget open in a new window

0down votefavorite
I have a flash calendar widget (code shown directly below) and I do not have access to anything other than the compiled .swf file (no access to .fla).
The widget contains some hyperlinks to other websites, these links are dynamic and changes based on a number of things.
There is also a corresponding swfobject.js file that is used to add functionality to the flash widget. The swfobject.js code is shown further down this post.
Currently, the way the code is now, when I click any of the hyperlinks that are available to me in the widget, the destination website that hyperlink takes me to opens in THE SAME PAGE as the flash widget which is a big problem.
I need to edit the code below so that any hyperlinks that are clicked inside of the flash widget open in a brand new browser window and do not take the user away from the original widget other than opening a new page with new content.
Because the hyperlinks that are available are always changing, the swfobject code below uses some functions and parameters.
I am hoping you can show me exactly what code I must insert, and exactly where I must insert it, in order to alter the behavior that happens so that when a user clicks one of the hyperlinks inside the flash widget, so that the content at the other end of the hyperlink opens in a new window, instead of opening in the same window.
See code below.
Thank you in advance for any help you can provide
Flash Widget Code
 <div id="activecontent"> <script type="text/javascript" src="swfobject.js"></script> <div id="awccalendar"></div> <script type="text/javascript"> var so = new SWFObject("awc.swf", "awccalendar2", "700", "180", "8", "#ffffff"); so.addVariable('calendarid', '0'); so.addVariable('appurl', ''); // Flash Widget Initial Date should be ddmmyyyy so.addVariable('ldate', '20052014'); so.write('awccalendar'); </script> </div> 
SWFOBJECT.JS CODE
/** * SWFObject v1.5: Flash Player detection and embed - http://blog.deconcept.com/swfobject/ * * SWFObject is (c) 2007 Geoff Stearns and is released under the MIT License: * http://www.opensource.org/licenses/mit-license.php * */ if(typeof deconcept=="undefined"){var deconcept=new Object();}if(typeof deconcept.util=="undefined"){deconcept.util=new Object();}if(typeof deconcept.SWFObjectUtil=="undefined"){deconcept.SWFObjectUtil=new Object();}deconcept.SWFObject=function(_1,id,w,h,_5,c,_7,_8,_9,_a){if(!document.getElementById){return;}this.DETECT_KEY=_a?_a:"detectflash";this.skipDetect=deconcept.util.getRequestParameter(this.DETECT_KEY);this.params=new Object();this.variables=new Object();this.attributes=new Array();if(_1){this.setAttribute("swf",_1);}if(id){this.setAttribute("id",id);}if(w){this.setAttribute("width",w);}if(h){this.setAttribute("height",h);}if(_5){this.setAttribute("version",new deconcept.PlayerVersion(_5.toString().split(".")));}this.installedVer=deconcept.SWFObjectUtil.getPlayerVersion();if(!window.opera&&document.all&&this.installedVer.major>7){deconcept.SWFObject.doPrepUnload=true;}if(c){this.addParam("bgcolor",c);}var q=_7?_7:"high";this.addParam("quality",q);this.setAttribute("useExpressInstall",false);this.setAttribute("doExpressInstall",false);var _c=(_8)?_8:window.location;this.setAttribute("xiRedirectUrl",_c);this.setAttribute("redirectUrl","");if(_9){this.setAttribute("redirectUrl",_9);}};deconcept.SWFObject.prototype={useExpressInstall:function(_d){this.xiSWFPath=!_d?"expressinstall.swf":_d;this.setAttribute("useExpressInstall",true);},setAttribute:function(_e,_f){this.attributes[_e]=_f;},getAttribute:function(_10){return this.attributes[_10];},addParam:function(_11,_12){this.params[_11]=_12;},getParams:function(){return this.params;},addVariable:function(_13,_14){this.variables[_13]=_14;},getVariable:function(_15){return this.variables[_15];},getVariables:function(){return this.variables;},getVariablePairs:function(){var _16=new Array();var key;var _18=this.getVariables();for(key in _18){_16[_16.length]=key+"="+_18[key];}return _16;},getSWFHTML:function(){var _19="";if(navigator.plugins&&navigator.mimeTypes&&navigator.mimeTypes.length){if(this.getAttribute("doExpressInstall")){this.addVariable("MMplayerType","PlugIn");this.setAttribute("swf",this.xiSWFPath);}_19="<embed type=\"application/x-shockwave-flash\" src=\""+this.getAttribute("swf")+"\" width=\""+this.getAttribute("width")+"\" height=\""+this.getAttribute("height")+"\" style=\""+this.getAttribute("style")+"\"";_19+=" id=\""+this.getAttribute("id")+"\" name=\""+this.getAttribute("id")+"\" ";var _1a=this.getParams();for(var key in _1a){_19+=[key]+"=\""+_1a[key]+"\" ";}var _1c=this.getVariablePairs().join("&");if(_1c.length>0){_19+="flashvars=\""+_1c+"\"";}_19+="/>";}else{if(this.getAttribute("doExpressInstall")){this.addVariable("MMplayerType","ActiveX");this.setAttribute("swf",this.xiSWFPath);}_19="<object id=\""+this.getAttribute("id")+"\" classid=\"clsid:D27CDB6E-AE6D-11cf-96B8-444553540000\" width=\""+this.getAttribute("width")+"\" height=\""+this.getAttribute("height")+"\" style=\""+this.getAttribute("style")+"\">";_19+="<param name=\"movie\" value=\""+this.getAttribute("swf")+"\" />";var _1d=this.getParams();for(var key in _1d){_19+="<param name=\""+key+"\" value=\""+_1d[key]+"\" />";}var _1f=this.getVariablePairs().join("&");if(_1f.length>0){_19+="<param name=\"flashvars\" value=\""+_1f+"\" />";}_19+="</object>";}return _19;},write:function(_20){if(this.getAttribute("useExpressInstall")){var _21=new deconcept.PlayerVersion([6,0,65]);if(this.installedVer.versionIsValid(_21)&&!this.installedVer.versionIsValid(this.getAttribute("version"))){this.setAttribute("doExpressInstall",true);this.addVariable("MMredirectURL",escape(this.getAttribute("xiRedirectUrl")));document.title=document.title.slice(0,47)+" - Flash Player Installation";this.addVariable("MMdoctitle",document.title);}}if(this.skipDetect||this.getAttribute("doExpressInstall")||this.installedVer.versionIsValid(this.getAttribute("version"))){var n=(typeof _20=="string")?document.getElementById(_20):_20;n.innerHTML=this.getSWFHTML();return true;}else{if(this.getAttribute("redirectUrl")!=""){document.location.replace(this.getAttribute("redirectUrl"));}}return false;}};deconcept.SWFObjectUtil.getPlayerVersion=function(){var _23=new deconcept.PlayerVersion([0,0,0]);if(navigator.plugins&&navigator.mimeTypes.length){var x=navigator.plugins["Shockwave Flash"];if(x&&x.description){_23=new deconcept.PlayerVersion(x.description.replace(/([a-zA-Z]|\s)+/,"").replace(/(\s+r|\s+b[0-9]+)/,".").split("."));}}else{if(navigator.userAgent&&navigator.userAgent.indexOf("Windows CE")>=0){var axo=1;var _26=3;while(axo){try{_26++;axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash."+_26);_23=new deconcept.PlayerVersion([_26,0,0]);}catch(e){axo=null;}}}else{try{var axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash.7");}catch(e){try{var axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash.6");_23=new deconcept.PlayerVersion([6,0,21]);axo.AllowScriptAccess="always";}catch(e){if(_23.major==6){return _23;}}try{axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash");}catch(e){}}if(axo!=null){_23=new deconcept.PlayerVersion(axo.GetVariable("$version").split(" ")[1].split(","));}}}return _23;};deconcept.PlayerVersion=function(_29){this.major=_29[0]!=null?parseInt(_29[0]):0;this.minor=_29[1]!=null?parseInt(_29[1]):0;this.rev=_29[2]!=null?parseInt(_29[2]):0;};deconcept.PlayerVersion.prototype.versionIsValid=function(fv){if(this.major<fv.major){return false;}if(this.major>fv.major){return true;}if(this.minor<fv.minor){return false;}if(this.minor>fv.minor){return true;}if(this.rev<fv.rev){return false;}return true;};deconcept.util={getRequestParameter:function(_2b){var q=document.location.search||document.location.hash;if(_2b==null){return q;}if(q){var _2d=q.substring(1).split("&");for(var i=0;i<_2d.length;i++){if(_2d[i].substring(0,_2d[i].indexOf("="))==_2b){return _2d[i].substring((_2d[i].indexOf("=")+1));}}}return "";}};deconcept.SWFObjectUtil.cleanupSWFs=function(){var _2f=document.getElementsByTagName("OBJECT");for(var i=_2f.length-1;i>=0;i--){_2f[i].style.display="none";for(var x in _2f[i]){if(typeof _2f[i][x]=="function"){_2f[i][x]=function(){};}}}};if(deconcept.SWFObject.doPrepUnload){if(!deconcept.unloadSet){deconcept.SWFObjectUtil.prepUnload=function(){__flash_unloadHandler=function(){};__flash_savedUnloadHandler=function(){};window.attachEvent("onunload",deconcept.SWFObjectUtil.cleanupSWFs);};window.attachEvent("onbeforeunload",deconcept.SWFObjectUtil.prepUnload);deconcept.unloadSet=true;}}if(!document.getElementById&&document.all){document.getElementById=function(

In that case, I will have no choice but to decompile the .swf to get the .fla because the original .fla is un-obtainable. Unless there is a way to edit the contents of the .swf file without decompiling it.
I can see the code inside via various decompile tools and it seems that I would need to add the equivalent of <src target=_blank> to some of the lines I have shown below.
obj_xml.load(appurl + "loadconfig.aspx?calendarid=" + calendarid); -- need to edit this so it opens in a new window using something similar to target = _blank
dest_page = appurl + "default.aspx"; -- need to edit this so it opens in a new window using something similar to target = _blank
I know a lot of decompile tools can get you the code and the .fla but once you edit and re-compile and attempt to replace the original with the new & updated file, the decompiler did not necessarily generate the properly formatted flash pro project file, so compiling it back into an operational .swf often ends in failure.
Do you know or can you recommend a tool that has a very good track record of re-compiling the decompiled modified.fla into a workable and usable .swf?

Adding new site columns to my issue tracking List, will result in having their Source field as blank inside the Issue content type

I have added an Issue tracking list to my SharePoint team site 2013. Then I wanted to add 5 extra columns to my list . So I did the following:-
I went to site settings.
Then I added 5 new site columns.
I went back to my list setting, I click on the “Issue” content type, and I added the 5 newly added site columns to my "Issue" content type , using the “Add from existing site or list columns” link as follow:-
And then these columns were added automatically inside the Edit, Create& Display forms.
But since this is the first time I work on such a task , so I want to make sure that I did every thing correctly. Because I am not sure why the 5 newly added site columns will have their source field inside the “Issue” content type as blank , as shown in
the above picture. So does this indicate that there is a problem ? or this is because I have added the 5 newly added site columns to the List content type and not inside the Content type at the site level ?
Thanks

Hi,
It’s by design, the Source field means the content type name.
As you said, when we create a new column, if we not attach the column to a content type, then the column would have not the source field option.
However, if you create a new column, then add the column in a content type, the content type would automatically update in the site.
Now, you would see a source content type appear.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Editing track order FROM INSIDE the iPhone

Is it possible to edit the tags on the tracks from inside the actual phone? I don't have access to iTunes right now, and an album I'm listening to is horribly out of order. Is there any way to get it to play in the proper order by just using the resources on the actual phone?

The only way I know of is to use the on the go playlist feature (covered on page 66 of the manual):
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

To call methods inside the same application is possible to use RMI ?

hello,
What I should like to know is if RMI can easily be used to implement comunication (calling methods) inside classes that are part of the one same application... This should be a restrict case to use RMI...
The reason to do it come from the need to use the instance of a class knonwing it only as Object... This can be good to do if some code is used for general pupose in many different contexts.
In this case you can pass to the "server class" a parameter 'o' of type Object (all the classes extend Object) of the "customer class" to get back informations if some elaboration happen inside the "server class"...
This purpose is generally implemented with event listeners, but perhaps it could be done easily using RMI too (I dont know it...).
Using RMI in this simple situation, don't should require anything of complicate (stub, .... mashalling parametres....) to have the reference to method of the "customer class" to call. The "server class" already recives a reference of the "customer class" how parameter of type Object, and the mame of the method too.
I propose a simple thoeric example to explain really what I said before:
Class Server {
    String methodName;
    Object obj;
    pubic Server( Oject o , String metName){ // constructor
        obj = o;
        methodName = metName;
        // some thing is done and, at last, the method callbakMethod() is executed
        callbakMethod();
    }// constructor
    public void callbakMethod(){ // this method have the purpose to call customerMethod()
          Class c = owner.getClass();
          Method m = null;
              try {
                      m = c.getMethod("callBackMethod",null);
                     * // (1)
                      // I think that here we could have the possibility to call
                      // the method customerMethod() belonging to class Customer..
                      // I don't know if it possible and ... (and if it is possible) I am not able to do it*
    }// callbakMethod()
} // class Server
Class Custmer{
    public Customer() { // constructor
          Server s = new Server (this, "customerMethod");
    } // constructor
    customerMethod() {    // I would this method is called from class Server
        // do some thing.....
    } //customerMethod
} // class CustomerMy ask is: it is possible to call customerMethod() from the Server class ?...
If the aswer is yes, I wold know the sintax to use to do it, please.
thank you
regards
tonyMrsangelo

RMI doesn't help you in the slightest here. You can just realize it all using local method invocation. All RMI does is to make that remote. If the objects aren't remote there is no point.

Is Editable Dropdown possible(To type inside the dropdown)???

Similar Messages

Maybe you are looking for