Is Interface only an alternative on for mutiple inheritance?
Last night i read Java Hand Book that shows that interface is used only for alternative for multiple inheritance.
But i disagree with it.Am i right?
JosAH wrote:
BigDaddyLoveHandles wrote:
jverd wrote:
JoachimSauer wrote:
I don't quite understand your question. Are you asking:
"Are Interfaces the only alternative for multiple inheritance?" (i.e. is that the only possible way to get the same functionality)If this is your question, the answer is yes.
"Are Interfaces only used as an alternative for multiple inheritance?" (i.e. is that the only use of interfaces).If this is your question, the answer is no.So in general the answer is yes and no.I'd say the answer is yes or no.
kind regards,
JosPedantic boolsniffer.
Similar Messages
-
Alternative formula for condition base value in cross-application
Hi,
I need inputs regarding an issue as:-
In "TAXINJ" Tax pricing procedure, for a ZXXX excise related condition type the alternate condition base value (Alternative formula for condition base value) must be of YXXX condition type of MM Purchase pricing Procedure.
How to acheive Alternative formula for condition base value in cross-application area as both condition type belongs to different Application area i.e. ZXXX belongs to TX and YXXX belongs to M.
One way or only way is thro' routine but I do not know How it works?
Thanking you.
Prashantroutine is only the best way for u in this case
u will have to use subtot may be 6 or 4 in MM pricing procedure
and write a routien in Tax procedure, i n that u will have to write a code where in ur sustem will featch this value in sub total and act a a base for ur cond type in Tax proc for ue condition type.
what is your excat requirement
there might be other work around that can help u around
hope this works
or write t routines one in MM and Other in Tax proc for ur issues -
Automatically Assign Alternative Key for BO
I have created a BO and an Alternative Key for the BO. The screen works fine as long as the user enters an ID in the Alternative Key field. Is it possible to:
1) Have the Alternative Key be optional and if not filled in (at the first save) have the system assign the "next number" automatically
2) Have the Alternative Key be only system assigned to the "next number"
If either of these is supported, what is necessary to do this? For scenarion 2) I could see that perhaps an Alternative Key is not needed at all. However I do need some reference to the object instance.
Thank you!This makes some sense, but I don't think I would have thought of it. When would the "fetch next number" action be called, from Event-AfterModify? Assuming this, then the first test would be to see if the number had already been fetched.
In this scenario, I would not care about "losing" numbers so I presume that I would dedicate the "next number" when it is fetched. If you try this, please let us know how it worked out.
I just noticed that if I attempt to create a sales order from the iPhone app that the new sales order screen comes prepopulated with an ID. This would imply a different strategy than using Event-AfterModify. Implies that the code is being executed upon field initiation.
Edited by: Greg Damian on May 23, 2011 9:59 PM -
Inbound interface found more than once for outbound interface
Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alexHi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan. -
I have sideloaded a windows 8.1 app for mutiple
users in the device using the following command in windows power shell:-
DISM /Online /Add-ProvisionedAppxPackage /PackagePath:”packagepath” /SkipLicense
Now i want to un-install the same app for mutiple
users in windows 8.1 since i want to install latest package of that app but i am not able to un-install the app for mutiple
users in windows 8.1 using windows power shell
This is what i have tried :-
DISM.exe /Online /Remove-ProvisionedAppxPackage /PackageName: "PackageFullName"
This what the error i am getting:-
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Error: 2
The system cannot find the file specified.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Am i missing anything ??
1)How to un-install a specific app for mutiple users in windows 8.1 using windows power shell??????
2)What are the variousways/Alternatives to un-install a specific app for mutiple users in windows 8.1 using windows power shell??????
Please let me know
Looking forward for your response
Thanks in advanceI am getting the same error, though I have verified the package name is correct. I am trying to uninstall the Reader App from a captured WIM (offline). Any suggestions?
dism /image:c\mount Get-ProvisionedAppxPackage Result:
DisplayName : Microsoft.Reader
Version : 2013.822.1823.785
Architecture : neutral
ResourceId : ~
PackageName : Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe
Attempt to remove the app returns this same error message:
C:\WINDOWS\system32>dism /image:c:\mount /remove-provisionedappxpackage /Package
Name:Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Error: 2
The system cannot find the file specified.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
The error is accompanied by the following entries in the error log:
2015-04-14 12:44:53, Error DISM DISM Appx Provider: PID=9000 TID=8104 Failed to get staged packages for package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'.
- CPackageAdapter::CreateForRemove(hr:0x80070002)
2015-04-14 12:44:53, Error DISM DISM Appx Provider: PID=9000 TID=8104 Failed while initializing package adapter for package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'
- CAppxManager::RemoveAllUserAppx(hr:0x80070002)
2015-04-14 12:44:53, Error DISM DISM Appx Provider: PID=9000 TID=8104 Failed to remove package 'Microsoft.Reader_2013.822.1823.785_neutral_~_8wekyb3d8bbwe'
- CAppxManager::ProcessCommandRemoveAllUserAppx(hr:0x80070002)
2015-04-14 12:44:53, Error DISM DISM Appx Provider: PID=9000 TID=8104 Failed processing command to remove Appx package - CAppxManager::ExecuteCmdLine(hr:0x80070002) -
MGTM0 Interface only in Admin VDC in Nexus 7010
Hi guys,
I created two new VDCs in a Nexus 7010 (NX-OS 6.2.6) and I can see the MGTM0 interface only in the Admin VDC
I wanted to see the MGTM0 in all VDCs.
Does someone get this problem too ?
My Best Regards,
Andre Gustavo LomonacoHi Reza,
Thanks for your reply.
If the user run the setup wizard, the interface mgtm0 will be created in VDC.
If the user don't run the setup wizard, the interface mgtm0 will not be created and you will need
to only use the interface mgtm 0 command to create the interface.
Thanks a lot -
What is an alternative download for microsoftt word using a mac bookair?
what is an alternative download for microsoftt word using a mac bookair?
Office 2004 and Other Applications Don't Work in Lion/Mountain Lion
If you have Office 2004 which is a PPC-only suite, it will not work in Lion/Mountain Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
As for other software, any PPC-based software will not run in Lion or Mountain Lion because Rosetta is no longer part of OS X. You will need to upgrade to Intel versions of the software.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.) -
Hi all,
Please let me know if there is any alternative method for GET_FRONTEND_FIELDCATALOG (CL_GUI_ALV_GRID class) in the class CL_SALV* family. I need to capture the field catalog(Or list of fields) of the current output list.
I have saved many layouts on my ALV output with different combinations of fields, When I select one layout and click on the custom button it should process only the fields displayed on ALV.Please let me know how do I get the fields displayed on ALV using CL_SALV_* family classes.
Thanks,
PrathapHi,
Check this link...[Setting up Layout|http://help-abap.blogspot.com/2008/09/salv-model-4-setting-up-layout.html] -
Is there any alternative battery for Nokia X2-00?
Hi there, I was just wonderin'... is there any alternative battery for Nokia X2? coz BL-C4 battery is a li'l bit short for its lifespan. It could only take a few hours to play some music (through headset/loudspeaker)
please help, thanks in advance...Hi Hanumantji,
Can you provide us your phone model? One possible reason why the phone hangs is that there is not enough memory available to carry out phone functions. You can move your data files from phone to memory card (provided that your phone supports Memory Card). If still the same, you can try to restore the phone to its factory settings as indicated on your manual. -
Building a page that only shows up once for the same user...
I've been asked to create a page that only shows up once for a user. This page is to include a form that the user fills out, but once the user has filled it out, they wouldn't see the page pop up ever again. Does anyone know the best way to do this?
I was told to build an ip logger that checks the database for ip addresses and only shows the page if the ip address is unique. That might be way beyond my ability. Is there a program out there that I could possibly use?
My client wants this done asap, so any help would be much appreciated...
Thanks in advance!
JulesSome limitations of cookies are that user needs to enable cookies, cookies expire, cookies can be deleted by the client, and they're dependent on the machine/browser that the cookie was set to. Basically, by using cookies, you as a developer do not have any control over the presentation of the data for the visitor because the visitor can manipulate how the data is presented.
That means if more than one person shares the same browser on the same computer then after user 1 visits the page and sets the cookie then users 2,3,4 or whatever will not see the landing page that was intended for a first time visitor since user 1 already set the cookie. Once cookie expires the script will not see a valid cookie so the landing page will display once again. If cookies are disabled on the browser then a cookie will never be set and the landing page will always display. If cookies are enabled on the browser and cookie is set by a user then later the user deletes the cookie from their browser then the landing page will display.
Cookies can be set and checked using javascript or server side scripting. There's plenty of information on the limitations of cookies and how to set and check for set cookies if you search online for php cookies, javascript cookies, etc. or visit http://www.w3schools.com/PHP/php_cookies.asp
Control of your data from a database is the best method of development. If you do not have a registration system currently developed and it's imperative for each individual user to complete the form before continuing on to the site, then the form you speak of *IS* the registration form and should be developed with a database. What information does the user have to complete on this form?
Sometimes there are situations where you do not want to force a signup/login for the user to access a page, yet you still want to control data to some extent. In these scenarios the use of cookies is the only reasonable alternative, which is arguably better than using an IP method. It really all depends on the circumstances that are being considered. Personally I don't think this situation is well suited for cookies or IP use. Based off the information provided I believe this should be developed using a database and server side scripting. It also depends on the importance of the page that is being displayed after the landing page and the importance of the data retrieved from the submitted form on the landing page. If it's of low importance then go with a compromised method such as cookies or IP. If the data is important then use a database.
best,
Shocker -
A1281 is the battery i got for my 15inch MBP. Is the battery life only 2 - 3 hours for a new battery on this device.
This is from Apple.
2 to 3 hours seems very low.
what is teh standard or advertised spec for a 15 inch Macbook Pro with this battery.
I would like to know so that i can return it if this is not normal.
Its expensive so comments would be appreciated.I say it depends on your model? average usage is about 3-4 hours depending on what you use and how you use it. Adobe Flash player eats a lot of battery power so if you are on a web page and has flash player, likely that it's eating up battery because of it's power thirsty.
Also check your systems activity monitor. It could be possible that one of your program/apps did not close right and may be still running. So check for that and end the process if necessary.
If you have a backlight keyboard, in a broad daylight, it's not necessary to have it on.
I also suggest that you use it plugged in most of the time, and it's not going to hurt or damage the battery if you have it plugged in all the time. Only use on battery if you are going to places that has no access to the outlet. If you are at home, then keep it plugged in. Just keep in mind to fully drain the battery until it your MBP turns off on it's own. This is the calibration process so that you have the most accurate battery readings.
The standard for 2011 MBP is 7 hours on battery. Before that model is 10 hours, but i don't believe that previous models will last 10 hours. Last week I calibrated my battery readings from fully charged and it took 9 hours to completely drain out the battery (I have a 2011 model),
If you think it's not normal and that your battery doesn't meet your expectation then set up an appointment with the genius bar and have them test the battery. They will determine whether it is faulty or not. -
HT204053 How do I combine my Apple ID with my iCloud ID so I only have one password for both?
How do I combine my (accounts) with Apple ID with my iCloud ID so I only have one password for both? I am using the same email address for both but want only one password for both...
You can't "combine" Apple ID's.
-
Fbl5n: The printer provides me only one customer items for each page...
Hi all,
launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
I'd like obtaining more customer items for each page...
What to do?
ThanksHi Umberto..
Thats how the standard report works..
To meet your requirement, you would probably need to look at another standard report.
In case you need further clarification, please feel free to write to me..
Good Luck!
Lucid-Mind... -
API or interface table to create releases for a blanket purchase agreement
Hi
I need to know if Oracle provides a standard API or interface table to create releases for a blanket purchase agreement.
I tried using the release_num field in PO_HEADERS_INTERFACE, PO_LINES_INTERFACE. But this is not working.
I'm able to create the blanket purchase agreement using the open interfaces, but not the releases.
Regards,
AlisterHi Alister,
You can't create a release of a BPA through API, there is no such APIs provided by oracle.
Where as you can create a BPA by using API. You need to dump/poplulate data in PO_headers_interface & PO_Lines_intreface table.. Then use Purchasing Documents Open Interface API to create a BPA.
Regards,
S.P DASH -
Ensure field sequence is correct for data for mutiple source structure
Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
HEADER_STRUCT G/L Account Document Header
LINE_STRUCT G/L Account Document Line
Source Fields
HEADER_STRUCT G/L Account Document Header
BKTXT C(025) Document Header Text
BLART C(002) Document Type
BLDAT DYMD(008) Document Date
BUDAT DYMD(008) Posting Date
KURSF C(009) Exchange rate
WAERS C(005) Currency
WWERT DYMD(008) Translation Date
XBLNR C(016) Reference
LINE_STRUCT G/L Account Document Line
AUFNR C(012) Order
HKONT C(010) G/L Account
KOSTL C(010) Cost Center
MEINS C(003) Base Unit of Measure
MENGE C(013) Quantity
PRCTR C(010) Profit Center
SGTXT C(050) Text
SHKZG C(001) Debit/Credit Ind.
WRBTR AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
E1FIKPF FI Document Header (BKPF) <<<< HEADER_STRUCT G/L Account Document Header
Select Target Structure E1FIKPF .
E1FISEG FI Document Item (BSEG) <<<< LINE_STRUCT G/L Account Document Line
E1FISE2 FI Document Item, Second Part of E1FISEG (BSEG)
E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
E1FISEC CPD Customer/Vendor (BSEC)
E1FISET FI Tax Data (BSET)
E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
Legacy Data On the PC (Frontend)
File to read GL Account info c:\GL_Account.txt
Data for Multiple Source Structures (Sequential Files)
Separator Tabulator
Field Names at Start of File
Field Order Matches Source Structure Definition
With Record End Indicator (Text File)
Code Page ASCII
Legacy Data On the R/3 server (application server)
Imported Data File for Imported Data (Application Server)
Imported Data c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
Converted Data File for Converted Data (Application Server)
Converted Data c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
Wildcard Value Value for Wildcard '*' in File Name
Source Structures and Files
HEADER_STRUCT G/L Account Document Header
File to read GL Account info c:\GL_Account.txt
LINE_STRUCT G/L Account Document Line
File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text Document Type Document Date Posting Date Exchange rate Currency Translation Date Reference
G/L Account document SA 20080401 20080409 1.05 CAD 20080409 Reference
Order G/L Account Cost Center Base Unit of Measure Quantity Profit Center Text Debit/Credit Ind. Amount
44000022 1040 Line item text 1 H 250
60105M01 13431 TO 10 Line item text 2 S 150
800000 60105M01 Line item text 3 S 100
60110P01 6617 H 40 Line item text 4 S 600
44000022 ACIBRAM Line item text 5 H 600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
CurtisHi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
VBAP( Item Structure)
My file should be like this i think
Identification content Fieldnames
H VBELN ERDAT ERNAM
Fieldvalues for header
H 1000 20080703 swapna
Identification content Fieldnames
I VBELP AUART
Fieldvalues for item
I 001 OR
002 OR
Is this format is correct.
Let me know whether i am correct or not
Maybe you are looking for
-
SO_OBJECT_SEND Function Module
Hello All, I am using this function module to send mails to the users. When i run the program that uses the function module its working fine and when i run the program in bacground its giving me a short dump saying The termination occurred in the ABA
-
How do I do back to previous system folder after archive and install?
Did an archive and install (retaining my existing user account), only to discover it was unnecessary. (Turns out the problem was hardware-related.) How do I go back to using my previous system folder?
-
Using Webdynpros for NWBC3.0
Hi All, It is the requirement of connectivity of NWBC using Webdynpro Actually I am new to Webdynpro application. Initially we have activated all the services of Webdynpro in the system then we develop the Webdynpro application in SE80 of WDR_CHIP_
-
TWAIN interface for Photoshop CC
Is There a TWAIN interface for Photoshop CC? I've looked everywhere on the web and can't even find a mention of it.
-
Hi! I recently had to reformat my computer and decided to try a Photoshop trial to see if it was worth upgrading from my ancient Photoshop 7. I am experiencing a problem where the window with the image I'm working on keeps flashing--kind of a quick w