Is it a mandate that Connector Server and AD are on same server

Hi,
Please let me know if it is a mandate that both the connector server and AD server should be on the same server for OIM to do any operation on AD.
Thanks

The connector server for AD has to run on a Windows platform system as it uses .NET but it does not have to be on your domain controller. We run the connector server and the AD domain on separate hosts.

Similar Messages

JAX-RPC: Web service where both server /and/ client are services?

I'm considering a two-way Web service in an application that I'm designing and would appreciate any insight from prior experience.
This will be a standard client-server application, where the server broadcasts messages and the client, in turn, can request further information about the messages that it receives (think RSS-style updates, but with more interaction). [strong]However[strong], instead of having the client poll the server for new messages, I'd like to have the client register itself with the server as a message listener. The server is currently implemented as a Web service on port X. I'd like the client to register itself with the server, and then receive messages on port Y.
I'm considering a design like the following (note the directions of the inheritance arrows):
( Server class ) --<-- ( RemoteServerImpl class ) -->-- / RemoteServer interface /
|
( Listener class ) --<-- ( RemoteListenerImpl class ) -->-- / RemoteListener interface /Some considerations:
* In both cases, the client and server are broken out into an interface and two classes. The non-Remote classes implement all of the functionality. The RemoteX interfaces declare the methods that will be exposed via RPC, and the RemoteXImpl classes are empty subclasses of the non-Remote classes.
* In order to register itself with the Server, the Listener must be passed in as a method parameter, and thus conform to the JAX-RPC specification for value types. However, value types can't implement java.rmi.Remote.
* Only the Server and Listener know anything about each other.
* This application can be run either remotely or locally, depending on how the Server and Listener are instantiated. For the latter, they're instantiated directly and the listener is registered with the Server. For the latter, the RemoteX interfaces will point to the service stubs.
* I don't see an easy way to allow both the Server and the Listener to have references to each other (at least now without some casting magic), since one of them will have to conform to the value type specification, which requires that all of its fields must be valid JAX-RPC types.
I've got the Server portions implemented and working, and am now going to turn to the Listener stuff. Can anybody see a fundamental problem with this design, or can suggest something better?

Hi There,
Because web services are fundamentally a Services-oriented architecture, and not an Object-oriented one, you are unable to pass objects by reference (only by value) hence the design decision to not allow rmi.Remote objects to be sent across the wire. The best way would be to abstract an object which does itself not represent a server, but a route to a server (lets call it ServerPointer). This must contain address, port, service info, etc.
Now, in your Server class, create a factory method which takes a ServerPointer, and returns a reference to a
remote server, e.g. protected Server createServer( ServerPointer p ) (using the necessary APIs to get such a reference)
Hope this helps...

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

Can I put both RMI server and client in a same program

hi everybody...
I wanna know that can I use RMI server and client in a same program....My idea is like that I wanna use the same program for client and server....When I open my program, I can accept connection from other program and if I want to connect to others, I can also connect it. I expect you to understand my question. Here are the sample code for my program...
package Chat.Rmi;
import java.lang.*;
import java.util.*;
import java.rmi.*;
import javax.swing.*;
import java.net.*;
import java.rmi.server.*;
import java.rmi.registry.*;
public class netKitManager implements netKitInterface{
    public netKitManager(){
        try{
        reg = LocateRegistry.createRegistry(4242);
        reg.rebind("NetKitServer",this);
        }catch(RemoteException re){
    public void DirectConnect(String ip){
        try{
        netUser = (netKitInterface) Naming.lookup("rmi://"+ip+":4242/NetKitServer");
        JOptionPane.showMessageDialog(null,"Connection succeded!");
        }catch(NotBoundException nbe){
            JOptionPane.showMessageDialog(null,"There is no server at specified IP address!");
        }catch(MalformedURLException mue){
            JOptionPane.showMessageDialog(null,"IP adress may be wrong!");
        }catch(RemoteException re){
            JOptionPane.showMessageDialog(null,"Remote exception occured!");
    public void SendMessage(String msg){
        try{
        netUser.SetMessage(msg);
        }catch(RemoteException re){
    public void SetMessage(String msg) throws RemoteException{
        chatKit.SetMessage(msg);
    private netKitInterface netUser;
    private Hashtable netUserList;
    private Registry reg;
}

Yes it can be done. I have done it.

How to identify the installed Weblogic Server and JDK are 32bit or 64bit?

Hi everyone,
I have a question ~
Both Weblogic Server and JAVA JDK are installed on the server already, but I only know the Weblogic Server is 10.3.4.0 and JAVA JDK version is 1.6.0_25.
I know the 64bit Weblogic Server installation file is a wlsXXXX_generic.jar package and 64bit JAVA JDK needed also.
But, since the Weblogic installed already, there are no such installation files on the Linux Server now.
I have tried the "java -version" for java version and check the Weblogic version from Weblogic console.
How to identify the installed Weblogic Server and JDK are 32bit or 64bit with Linux command? Or is there any way to check it?

What you can try to do is use WLST (or an MBean browser, such as JConsole or JRockit Mission Control) and connect to the adminserver.
For example when using WLST:
# set the environment by using setWLSEnv.sh (located in the ${WL_HOME}/server/bin directory).
# start WLST by using: java weblogic.WLST
# connect to the adminserver
connect('adminusername','adminpassword');
# change to the serverruntime environment
serverRuntime();
# show the attributes
ls();
# Here an attribute is shown called WebLogicVersion that shows the version of WebLogic
-r-- WeblogicVersion WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638
# Note that this does not show if is 32 bits or 64 bits to retrieve this information you have obtain the JVM version
# change the directory
cd('JVMRuntime/AdminServer');
# show the attributes
ls();
-r-- Version R28.0.1-21-133393-1.6.0_20-20100512-2126-linux-x86_64
# when you have something like x86 at the you are running a 32 bit version, if you have something like x86_64 you are running a 64 bits versionAs mentioned above you can also retrieve this information by using a MBean browser.

I am not able to sync my outlook contacts with my iphone (both ways) noting that the calendar and notes are suncing perfectly (both ways)?

I am not able to sync my outlook contacts with my iphone (both ways) noting that the calendar and notes are suncing perfectly (both ways)?

You cannot sync Outlook 2011 directly with an iPhone, but if you go to the Tools menu and choose Sync Services, you can have Outlook sync with iCal and Address Book, which will then sync with the iPhone. And if your business is using Microsoft Exchange, you can set the iPhone up to communicate and sync directly with the Exchange server.
Regards.

What ideal Win Server and Hardware are recommended for 11g DBs

What best Win Server and Hardware are recommended for 11g DBs?
- Processor
- Memory
- Storage
- Network
- Etc...
Following is the scenario:
- The server will be for development and test DBs
- More than one databases will be installed each for each project
- Maximum 4 databases will be accessed each time
- Maximum DB size for each DB will be in couple of GBs.

Which version of 11g ? For 11gR2, see the requirements here - http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/reqs.htm#i1011417
Any server that exceeds these requirement will suffice. Obviously the more the number of processors, the faster the processors, the more the RAM, the more the disk etc etc, the better.
HTH
Srini

Subversion error -- server and project are not accessible

I just updated to CS4 for the only reason to be able to use
SVN within the program. I used to use versions, but thought that
not having to switch would be nice.
Whatever I tried, I'm getting the error "server and project
are not accessible." Remember, log in with Versions works smooth as
pie.
I created a new folder to download a new copy from the
repository, uninstalled all previous subversion clients and
reinstalled CS4, only to still get this error!
What to do? Why is Adobe making this so hard without proper
support?

rosiewrose wrote:
> Why is there no live chat or other support that would
help me resolve this??
This is a user-to-user forum. Adobe provides two free
technical support
incidents for standalone products. Details here:
http://www.adobe.com/support/programs/customer/gss.html
> Where can I get my money back, I really don't have time
for things like this.
Contact Adobe customer support.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

Tried to reinstall iPhoto library from external hard drive, it shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.

My hard drive crashed recently and we took it to apple to get repaired. The apple employees said that they would have to replace the hard drive but they didn't have the equipment to get the data off my hard drive. So I took it to a computer store who had the right equipment after a month and a half of waiting they finally got all the data off my hard drive and put it on an external hard drive (Seagate Expansion Portable Drive). I then took it back to apple who replaced the hard drive. Now I'm in the process of reinstalling everything. I have never done a Time Machine back up or backed my laptop up to . Which I now will do very often once I've reinstalled everything. I have reinstalled all of my desktop images and folders as well as my iTunes library with no issues. However when i went to reinstall my iPhoto library it came up blank. I then Rebuilt the library several times and this was the result.
It shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.
Please help i have three years worth of images from holidays on here and would be devastated if i lost them.

iPhoto cannot find the thumbnails or the original pictures.
Go to your iPhoto Library in the Pictures Folder.
Right-click on it and from the resulting menu, choose 'Show Package Contents'.
This will bring you inside the iPhoto Library package. There you should see a Folder called Masters. Within that, there should be folder containing your actual photos.
Are they there?

Entity Framework - Code First - Migration - How to access SQL Server and Oracle using the same context?

Hello,
I use Entity Framework code first approach.
My project is working fine with SQL Server. But, I want to access Oracle too. I want to switch SQL Server and Oracle in run time.
I am able to access Oracle using "Oracle.ManagedDataAccess.EntityFramework.dl" in a new project.
But, Is this possible to access SQL Server and Oracle in the same project.
Thanks,
Murugan

This should be possible with a Code-First workflow. In Code-First the database mapping layer is generated at runtime.
David
David http://blogs.msdn.com/b/dbrowne/

Child DC cannot Replicate to Parent DC, because of connection errors. MS PortQryUI shows that ports 3268 and 3269 are not listening,

I started a support case with Microsoft to help me with raising the our domain Forest level because i received a message stating that there were Windows 2000 PDC still listed in the database. These PDCs were removed years ago. The tech saw all of the problems
i was having with domain replication so that is where he started. running the MS PortQryUI shows that ports 3268 and 3269 are not listening, (TCP port 3268 (unknown service): NOT LISTENING) when run FROM a Child domain controller against the Parent
Domain controller. Between the 2 Child domain controllers these ports are listening.
The Windows firewall is not running on any of the controllers, i removed a virus protect client from all of the servers, although i didn't enable the firewall there either, but these ports are still not listening on the Parent DC.
I need help debugging this. I am not very familiar with network sniffers so if i need to run one i'll need some guidance. This DC only has one NIC, all IP addresses are static, all servers are setup like this. All servers are in the same subnet, on the same
lan, on the same cisco switch, there shouldn't be anything blocking this port from starting.
I looked over other post that show this same problem, but they don't give a solution. If i am not using the Windows firewall why wouldn't these ports be open?
Any ideas? web searches are all over the map on trying to find the reason for this.
Bobby

Try running the below command on the DCs that you think have the ports blocked or all the DCs.
netdiag /test:ipsec /debug > c:\dcname-ipseclog.log
Open that from the C drive and see if there is anything saying block or filters.
Also, just for kicks have you disabled the firewall service on the DCs?
And just for kicks have you tried enabling firewalls ports on all the DCs? The KB is below
http://support.microsoft.com/kb/555381/en-us
Step 1 - netdiag results
Step 2 - disable the firewall service on all DCs if step 1 was negative
Step 3 - enable the firewalls on all DCs per KB 555381 if step 2 doesn't work
Let us know how it goes!
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection

TS2446 A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account

A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.

Just authorize the computer and retreive them.
Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one.

HT204053 I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

Not on your own. Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
(115868)

How to install both solution manager and ECC Development on same server

Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
Karthik

Hi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker

How to Install R/3 and CRM on the same Server?

Hi All,
I would like to install R/3 and CRM on the same server (as the load is less). I know how to install them seperately.
I would like to have some instructions how to have them installed on the same server.
Thanks in advance.
Regards,
Vijay

As Sunil explained - MCOD (or) you can think to have 2 differnt DB SID's as weel 2 different SAP SID's. By default 1st Installation takes Listener Name as LISTENER & port 1527 when you are doing second Oracle installation use another lister name as LISTENER002 & give port 1526 ( for example).
MCOD will be the best option to unplug from oracle instalation requirement but - think of future plans. even it can be any size business don't think to do MCOD with SAP Business System like R3 .
Becuase qwe may have different requirements from the Business / functionla Team for refreshing / building the development system with a copy of production system - don;t get confused there are Techniques for Refreshing a Development Instance with production system also.
Any how you have to take decission to go with MCOD (or) not . I also request SUNIL to comment on MCOD installations with R3 system .
But I beleive Sascha Version is wrong - i can have multiple application servers of differnet products on single Box if my OS supports.
as application servers will have 3 individual mount point which points to different system
<Central Instance>:/sapmnt/<SID>/global
<Central Instance>:/sapmnt/<SID>/prfoile
<Central Instance>:/sapmnt/<SID>/exe
each SID NFS mount point can point to different sever & i can multiple application server of differnt SAP Products on 1 BOX.
Trans directory is problem - but it does not require either for installation (or) for runningAS instance .

Is it a mandate that Connector Server and AD are on same server

Similar Messages

Maybe you are looking for