Is it mandatory to create a project for every enhancement?

Hello Gurus,
I have written some code in one user exit.
Now i have activated it and it is working fine.
I wanted to know. is mandatory to create a project(in CMOD) for every user exit?
Also what is the functionality of the project?

Hi,
It is not compulsory that we have to create a project for an enhancements
Projects are created inorder to sort or classify enhancements...imagine we have SD/MM module enhancements..then it is upto us(or the person in charge) to decide whether we need to create separate projects one for SD..another for MM or assign it to the same project or even continue without assigning to a project....
Once enhancements are assigned to a project it will be easy to find which enhancements are active and already in use...so you can go ahead without assigning an enhancement to project also..according to the requirement
We cannot have an enhancement existing in 2 different projects(it will throw error if you try to create in 2 projects)
It is simple to check this out...take a user exit for a t-code and put a break point...activate the user exit without assigning it to a project and see if it stops....but always take a simple user exit that triggers without any prerequisite & specific to a transaction ......test with that transaction only
Hope it helps
Regards
Byju

Similar Messages

How we create Schema group for every vendor?

If we have multiple vendors/transporters, how you configure pricing procedure for each vendor what is the process of creating Schema group for every vendor?
Thanks in advance
Suresh

hi suresh,
you create Pricing procedure, and then you create Vendor schema group; and purchasing schea group.
for your scenario you will create N number of vendor schema groups.
follow this menu path:
spro --> materials management --> purchasing --> conditions --> define price determination process --> Define schema determination --> define caluculation schema for standard purchase orders -->
in that screen:
you maintain entries in the combination of
purchasing org schema group -- vendor schema group -- pricing procedure.
for your scenario, you maintain N number of vendor schema groups and assign it to procing procedure.
hope this may help you,
Regards
srinivas

Please help! error -61399, how to create custom vi for every input in project explorer

Please help! I have been trying whole night but couldn't get through it.
I am creating custom vi to simulate cRIO inputs on development computer. ( FPGA target>>execute vi on>> development computer>>custom vi) I then follow tutorial creating test benches:
Tutorial: Creating Test Benches (FPGA Module)
but when I run fpga vi I get error -61399, input item/node is not supported (input item/node is my input which I've added from project explorer).
The closest I got in my research on why this error is occuring- I have not connected all inputs/outputs in project explorer to custom vi. I followed tutorial exactly step by step but still I couldn't get through it.
Please help! Please help!
In order to do further investigation, I converted custom vi to a state machine , please find attachment. Having highlight execution on, it clearly demonstrates that input in cRIO are not being selected as a result default cases execute.
Please find attached modified custom vi with state machine, fpga vi, and original custom vi.
Best regards
Ta
Attachments:
custom vi.vi ‏32 KB
inverter.vi ‏16 KB
original custom vi.vi ‏22 KB

Solution:
You will see this error if no Custom VI has been selected or the Custom VI has not been configured for every I/O item that you are using in your FPGA code???
I think that's exactly where I'm stuck!
How do I configure it for inputs??? My attachement show that I have done everything being asked in tutorial!
Thanks!

How to create LSMW project for MPN deletion

Hi
in MP01 there is a deletion indicator how to tick mark that for All MPN materials
how to create LSMW project
bcz LSMW project wil reads the data line wise bt MPN numbers varies for different materials
how to do this?
i cant do it manually bcz there sre around 15000 materials are there...
can anybody help me on this?
Regards
Smitha

there is no standard program for deletion, through LSMW recording method possible to delete the materiasl.
goto LSMW tcode and create programt subproject and object goto step 1 select the second method that is RECORDING , here you need to record the MM06 tcode and process the recoding...
the tcode MM06 is set the deletion flag.
if you want delete alla metarial based on client level use MMDE tcode.

Is it mandatory to create Supply function for ItemLIstBox UI

Hi,
I am trying to user ItemListbox UI. I followed below link and created it. If am not using supply function ItemLIstbox is not populating data.
I would like to know if it is mandatory to use Supply function for this UI.
If not please give me steps to create and populate elements into ItemListBox
Regards
Satish
Edited by: satish jarabana on Jan 23, 2012 11:39 AM

Thanks Srinivas,
I hae already done that and am able to see data.
But my doubt is if we assign data type as Data Element for an attribute, and bind this to an input element or drodown, it will show values by default.
Is this not the same for ItemListBox.
Regards
Satish

How create dynamic URL for every row shown in the report?

Hi,
Iam new to this Application. I created one interactive report to find the number of bugs logged for every product and its sub component for past one year. The report will look like below structure in the application.
Product Subcomponent Total
P1 S1 10
P2 S2 4
P2 S21 15
Now i want to pick the value of Prouct and sub component for every row dynamiaclly and want to generate the URL with the conditions and make it as hyperlink for the Total Column.
Iam able to make hyperlink for the Total column using the edit options for the total attribute, but it is opening the same page for all the rows in the total column. I want to generate dynamic URL by picking the value prodcut and sub componenet dynamically from the report for every row and want to make it as hayperlink for every row individually.
Please tell me how to do this?
Please revert back if you are not clear. Appericiate for your quick help.

Hello <unknown user>,
So you already set the Column Link attributes for your Total column. Should all links go to the same page, but with different parameters (ProductID, SubcompID)? Or to another page? And how can you determine that page?
Assuming you'll go to a sort of detail page or form:
Target = [Page in this app]
Page = <your target page no>
Item1 = <ProductID field in target page>
Value = #PRODUCTID#
Item2 = <SubcompID field in target page>
Value = #SUNCOMPID#
(you can use the ' flashlight' for getting the correct values)
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

To create a room for every user or not?

My application requires that guest/participants do not need to login. They only enter names. Also the meetings are not scheduled. It's on walk in basis where host waits for the guests. In my case, I will have hundreds and eventually thousands of hosts. For every host, do I need to create a new room and allocate it to only that user? Is that how the rooms supposed to used or there is any other data structure such as groups which I can use? Are there limitations to how many rooms one application can create?

Same answer, you can do both
I wouldn't create a room per customer, but you could potentially create one room per agent. You'll need to build your own application that would allow your to select the correct agent given the customer needs, but you need to do that anyway.
Once you know the agent, again, having the agent always enter his/her room and wait for customers, or have the agent enter a random room and then pair it with a customer is pretty much the same.
Fixed rooms will save you to manage room creation/deletion (you will still need to create a room when a new agent joins a company and remove it when he leaves, but that can be part of the normal management of agents).
One feature that we are planning to add is rooms that "autodelete" when the session terminate, so you can easily create a random room on the fly and don't have to remeber to cleanup.
But basically I think what you do depends on a couple of workflows :
1) A host (teacher, agent, advisor) has routinely scheduled sessions with customers (or students). In this case it may be easier to have a fixed room for the host and direct the guests to that room for the scheduled session (again, using external authentication you can guarantee that only users registered or authorized for that session can join that room)
2) Two users (host/guest, agent/customer, two random users, etc.) wants to initiate an ad-hoc conversation. In this case it may be easier to create a room on the fly (or pick a room from a pool of existing rooms) and direct both users to that room.
As I said in the previous post the serverIntegration modules are your friends here: they have all the methods to create/delete rooms, create authentication tokens and in general manage your account.

Creating 1 spool for every 1000 sapscripts

Hi Friends ,
I have a program where i am printing W-2 forms (sapscripts) . There are a total of 3000 forms . I need to be able to split them into 3 spools of 1000 each instead of creating 3000 spools . Please advise as to wat parameters need to be set in the beginning and when starting a new set of spool with 1000 forms .
Thanks,
Teresa

You need to count the records and then for every 1000 you have to make a new SPOOL..
LIke:
LOOP AT ITAB.
CNT = CNT + 1.
ITCPO-TDNEWID = ' '.
IF CNT = 1.
ITCPO-TDNEWID = 'X'.
ENDIF.
OPEN_FORM
wtih OPTIONS = ITCPO.
WRITE_FORM
CLOSE_FORM
IF CNT = 1000.
CLEAR CNT.
ENDIF.
ENDLOOP.
Regards,
Naimesh Patel

Time Lapse import creates new clip for every frame!

I shot a time lapse film - five hours reduced to 4 minutes ie one frame every 4 seconds. The iMovie Import wizard created a separate 'Clip' for every frame, (which is unusable), and then crashes the program every time I try to open it, I guess because there are too many 'Clips' to handle.
Is there a way to import these discontinuous shots as a single clip? If iMovie can't do it, any ideas on a better way? I couldn't get Quicktime Pro to do any better - it opened thousands of separate windows on the desktop.
Fortunately, the original is on DV, though each frame has a different time stamp on it.
Thanks for any ideas!

FYI
I found that iMovie 6 was able to handle the multiple files and I could export them as an MPEG4 file. iMovie 08 bombed big time.

I get "We can't verify who created this file" for every PPT or PPTX file I open on my local network (Win 7 only, not Win 8)

I've searched around, and perhaps I've missed it, but I have a specific problem that just started today (4/1/2014). I have 3 PCs in a local home network and they all have been sharing things fine so far. PC1 is my main storage computer (Windows
7), another is a laptop (Windows 7) and a third is a laptop (Windows 8.1).
On the Windows 7 laptop, when I open Windows Explorer and navigate my way to a file I want to open (which is stored on PC1) and double click on the file to open it USED to just open using the right program (PowerPoint2007) which I have fully installed on
the Win 7 laptop. Note also that "Microsoft Office (2010)" came pseudo-loaded on the laptop, but I have set the default for all PPT and PPTX files to be opened using PowerPoint2007. I've had a few hiccups in the past where this undesired,
not-fully-loaded version tries to get in the way of me opening files with PowerPoint2007, but right now all files are set to open using PowerPoint2007.
So I'm not going on the internet, I'm not using IE, and this is only happening with PPT and PPTX files and only on my Win 7 laptop. DOC/DOCX and XLS/XLSX files open fine with the 2007 version of the Word and Excel respectively. All files, including
the PPT and PPTX files on PC1 are openable without trouble on the Win8 laptop with PowerPoint2007.
Any idea why this would suddenly start happening?

Sorry, I should have said that I'm having this issue on Win7 Enterprise SP1 and not XP.
I'm having trouble understanding how cacheing is related to how windows resolves this security violation, and why changing the Internet's custom security settings makes the caching problem go away? You are correct in that running a mdb file from
the desktop does not produce the warning; however this is a database housed on a shared drive so that the database is accessable to other users...
unfortunately unblock is not presented as an option in the file properties, and even if it was that seems a bit impractical to do for every single zip file on a share drive which would accumulate more files as multiple users add to it.
Also: I have two computers with the same settings in both the trusted sites and the Launch apps, but one opens fine and the other does not.

Can someone please tell Apple to create a "dot" for every event in a given day?

Can someone run this idea up the chain at apple? It would be nice to see what days are busiest from the monthly view. I single dot can represent 1 event or 20, but this is not helpfull. It seems like it would be an easy programming fix to make a "dot" for every event scheduled in a given day, no? You could press this idea further by making the dot color coordinated to the type of event.
Or is there a setting that I am missing?
Thanks,
Stoutland

No-one here can - we're not Apple. Try the feedback page.

Contentbase Issues - Why does it create 2 proxies for every video assett?

I am trying to deploy a SAN and a Media Asset Management System. After testing Final Cut Server, I've noticed that within the Proxies.bundle you get:
1) Duplicate Thumbnails
2) Duplicate Poster Frames
3) Duplicate Low Resolution Video Proxies
Why dublicate everything? I want to SAVE SPACE and if I have to create proxies (since you can't really turn this off yet), why take up twice the space?
Also, Why can't I control or alter the thumbnail or poster frame image generated? I might not want to pick the first frame of video. I might want to change it.
I see no place in the Admin panel to address these issues...At All!
Anyone know what's up?

Thanks so far Nicholas and Chris,
Here's the thing: I've read both the admin guide and the peachpit book on FCS now. I don't understand a few things:
1) If I import a FCP project as an asset, it will copy all media associated with the project to either the Media or Library folder. Wow Great. But when it make the proxies (Thumbnail, Poster frame, Low Res Copy--Not Editing Proxy; this isn't enabled in my setup now), it creates a series of folders like:
00000000001a
00000000001b
00000000001c
00000000001d
And in each you get the XML, the thumbnail, the poster frame, and the low res proxy.
However, then it duplicates three files: the thumbnail, poster frame and low res proxy into three more folders:
00000000001e
00000000001f
00000000001g
These are literally the exact duplicate of the first three proxies. (The XML is not duplicated.) If I delete these duplicates manually, the system still works, provides previews, a thumbnail, etc. inside the user UI; no problems.
Additionally, if I import media/an asset directly--not attached to a project--it only creates one set of proxies and no duplicates.
This leads me to believe that it is making proxies for both the media asset and the project file, instead of one set of proxies for both.
Either way, I need a "better way" to integrate our workflow with FCS at our web video company. We have some 5200 raw media files I need to catalogue and import. Most of these files have been edited and exported into final conformed shows--those are about 3700 final QuickTimes.
We also have tons of other still photos, and gfx, that I would like to catalogue. Before I start moving stuff into FCS, I want to be sure that I am not wasting proxy space.
If either of you has more time, I would be grateful to follow up with more technical questions and workflow solutions.
Thanks,
Shawn Larkin

Creating a project in Flex Builder for the Hybrid Store sample Application

Hi all,
How to create a project in Flexbuilder for the hybrid store
sample application.
I downloaded the source code of hybridstore application,
Now i have to create a project for it to run that application
in my system,
will you please tell me how to create a project for this
sample.
I have also read the readme.html file. but i could not follow
exactly what they are saying.
what i did is, I unzipped the source code into a folder
hybridstore.
I opened the flexbuilder : File -- new -- flexproject ( i
have selected) then i have given name to my file (hybridstore) ,
and set the path to the hybridstore folder where the source code
exists.
but it as created hybridstore.mxml file also.
it is not working.
will you please till me how to create project for this
application.
I have created project for other samples like restaurent
finder, dashboard. they are working fine.
I got problem with this sample only.
Thanks in advance
Regards
Avanthika

Hi,
thanks for your reply,
I have tried to open using file import, but still it is not
working.
in the readme file for this application , contains how to
Creating a project in Flex Builder for the Hybrid Store
application:
Name your default application catalog.mxml.
Prevent Flex Builder from generating an HTML wrapper: select
Project > Properties. Select the Flex Compiler page, deselect
the Generate HTML wrapper file option .
Create a Run configuration for your project but deselect the
Use defaults option and instead assign the Run setting to the
hybridstore.html in your project's bin directory.
To enable debugging of the Hybrid Store application you must
create a copy of hybridstore.html. Open it in an editor (you can
right-click on the file and select Open With > Text Editor).
Find the line that says "src", "catalog" and change it to "src",
"catalog-debug". Assign the Debug setting to this new HTML file.
As i am new to flex , i could not know how to do this.
please help me how to do this.
regards
Avanthika

Unable to create a new project for MUDE

Hi All,
I'm trying to create a project for MUDE but the new project option is not enabled is there something else I need to do before creating a project?
Please advice.

check this Setting Up and Using the Multiuser Development Environment - 11g Release 1 (11.1.1)

Problem in ESS Build when creating the project "Import can't be resolved"

Hi All,
we are using ESS and MSS 600 for ERP 2005 and EP 7.0.
Once the cms INBOX components are imported to Development, I have started my development.
In the Build process, when I am trying to create the Project for ess/us/bank inactive DC,
It says: "Build with warnings"
It is showing the couple of warning in General User Output as:
Warning: Source folder "META-INF" does not exist and will be ignored.
WARNING: No reference entry for runtime dependency on component "ess/per" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "ess/xx" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "ess/xx/bank" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "pcui_gp/xssfpm" (vendor "sap.com")
WARNING: No reference entry for runtime dependency on component "pcui_gp/xssutils" (vendor "sap.com")
When I open the project in "Web Dynpro" perspective and look at the implementation of any View ... I see the error at import statement:
import com.sap.xss.hr.per.us.bank.detail.wdp.IPrivateDetailView; (For Detail View)
It says : The import "com.sap.xss.hr.per.us.bank.detail.wdp" can't be resolved
How should I proceed?? I verified for other components as well and getting these import error:
I looked in the package folder and there is no folder with the name "wdp" in "com.sap.xss.hr.per.us.bank.detail"
Can some one please help me on this. Highest points would be rewarded If i could solve the problem.
I have followed "JDI Cook BOOK" for creating tracks and imports. In the "NWDI COOKBOOK" it also says to include "EP BUILD TOOL" apart from "DI BUILD TOOL" for the build time dependency of a component. But i couldn't find "EP BUILD TOOL" any where else, is this causing all this mess? When I look at my build time dependencies for SAP_ESS and SAP_MSS it has got :
SAP_JEE
SAPPCUI_GP
SAP_BUILDT
SAP_JTECHS
I think this should do, Please some one help me.
Thanks,
Hari.

Hi purav,
Try closing the nwds and open it again, if problem not solved then from your .dtc try to find that file which is missing and add in bulidpath and compile.
Thanks,
pkv

Is it mandatory to create a project for every enhancement?

Similar Messages

Maybe you are looking for