Is it possible to call the members of the CFMapping dimension from a EVDRE?

Hello experts,
I am working with the application Cashflow. This application uses the dimension CFMapping to match the dimension CFAccount with the dimension Account, when the package "Cash Flow Recalculation" is run. I would like to know how could I call the members of the CFMapping dimension from a report. When I try to do this,the EVDRE shows the following error message: #ERR: Invalid CFMAPPING, col# 1.
Thanks in advance,
Álvaro

Hi Mehul,
I have already checked this but it still doesn't work. The dimension CFMapping is not contained in any application, in BPC administration I checked this in the application folders. I think that the CFMapping dimension is only used to support the execution of the package I mentioned in the first message, and that is why I have problems to call it's members from a report using the normal procedure.
Regards,
Álvaro

Similar Messages

Is it possible to call the Print Quote functionality from Custom ADF page

Hi,
We are researching if it is possible to call the Print Quote functionality from the Custom ADF application.
Goal is to pop up the PDF report upon clicking the Print Quote button on the custom page. Is it possible ?
Atleast advice on the direction to go forward is appreciated.
Thanks
Sai

Hi ,
Please check following thread on forum -
Re: ADF: Calling OAF Page from ADF page
Check this may also be useful-
https://blogs.oracle.com/shay/entry/to_adf_or_oaf_or
I have not tried yet but Steven Chan (Sr. Director OATG) suggest following methodolgy for this-
https://blogs.oracle.com/stevenChan/entry/appsdatasource_jaas_ebs
Thanks,
Ashish

Is it possible to call the contact number indicated in the cell?

Hello! Tell me please, I want to move a lot of contacts in the electronic form and organize a list of contacts in Numbers. Is it convenient to use it on the iphone? Is it possible to call the contact number indicated in the cell? That is an example: name, contact, etc. A few columns. I click on the number of human cell, and then what would happen if a set of user (as it happens in the notes for example)?
Sorry for my english.

Your post is now in the iWork for iOS community. You should be able to get to it using the link in the email you receive with this message.
Regards,
Barry
PS: Interesting that I received the notification of your post in Russian (except for the first and last words).
Here's Googles translation of my reply above:
Ваше сообщение в настоящее время в IWORK для IOS сообщества. Вы должны быть в состоянии добраться до него по ссылке в сообщении электронной почты вы получите с этим сообщением.
С уважением,
Барри

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting?

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting? We are not interested in migrating the CDR data to v6 because of the concerns it introduces to the upgrade process. Is it possible to get the raw data and somehow serve it from a different machine? (knowing it would be 'old' data that stops as of a certain date). If so, what would be the complexity involved in doing so?
It seems like the CDR data lives within MSSQL and the reporting interface is within the web server portion of the Call Manager... that's as far as we've dug so far.

Hi
It is absolutely possible to get the data - anyone you have in your org with basic SQL skills can move the data off to a standalone SQL server. This could be done most simply by backing up and restoring the DB using SQL Enterprise Manager.
Moving the CAR/ART reporting tool would be more difficult... if you do actually use that for reporting (most people find it doesn't do what they need and don't use it for anything but basic troubleshooting, and get a third party package) then the best option may be to keep your publisher (possibly assigning it a new IP) and leave it running for as long as you need reporting.
You would then need a new server to run your upgraded V6 CCM; you may find you need this anyway.
Regards
Aaron
Please rate helpful posts...

** Is it possible to call the backward steps in BPM?

Hi friends,
Is it possible to call the backward steps in BPM from the current step ? Like 'Throw Alert' in BPM whenever we restart the BPM.
Kindly reply.
Kind Regards,
Jeg P.

Hi friends,
Is it possible to call the backward steps in BPM from the current step ? Like 'Throw Alert' in BPM whenever we restart the BPM.
Kindly reply.
Kind Regards,
Jeg P.

Is it possible to call custom designed RFC function module, apart from BAPI

Hi Friends,
1. Is it possible to call custom designed RFC function module, apart from BAPI.
2. Why we call it Adaptive RFC layer, Since every time the JCO layer updated with SAP, Why cant be dynamic.
Thanx for Ur time.
Cheers,
Sam

Also check <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm">here</a> for more information on aRFC. Here you can find why it is called adaptive.
Regards,
Christophe

Is it possible to call a class in a jar file from JNI environment?

Hi
Is it possible to call a class in a jar file from JNI environment?
Thanks in advance.

Could you explain a bit more what you are trying to do? (In other words, your question is vague.)
o If your main program is written in C, you can use JNI to start a JVM, load classes from the jar of your choice, and call constructors and methods of the objects defined in the jar.
o If your main program is java, and has been laoded from a jar, a JNI routine can call back into java to use the constructors and methods of classes defined in the jar(s).

The below means called the online number from insi...

calling history
The below means called the online number from inside uk from +4413000000???
This call was forwarded from +4413000000

Unfortunately, it is not possible to transfer Online Numbers between accounts. You can, however, set up call forwarding from one account to another to be able to receive calls when being logged into either one. Please see http://www.skype.com/intl/en/features/allfeatures/call-forwarding/
If you found my answer useful, you can express that by giving me Kudos ↘. If my suggestion did the trick, mark it as a 'Solution' to help others.
Thank You!

Is it possible to import the failure cases from another test plan in MTM ?

Hi,
Is it possible to import the failure cases from another test plan? For example, I have created a new test plan with ID 1002. Now I want to import the failure cases from test plan with ID 1001. Is there anyway to do this?
Thanks,
Leslu

Hi Leslu,
As far as I know, there isn’t that feature in MTM, but we could achieve that by add test cases to the test suite.
As we know, the test case is associated to the test suite, remove the test case from the test suite won’t delete the test case, it just remove the relationship.
So, we could base on the test cases’ id to add the test cases to a test suite of another test plan.
The condition is:
Work Item Type In Group Test Case Category
ID In id1,id2 (e.g. 1,2,)
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to call the RFC's from the third party applications or Non SAP applicat

Hi,
For calling RFC's from the wedynpro , SAP has provided the modeling concept.
In the same way, if i want to access or call the RFC 's from the third applications or Non SAP applications what is the procedure and what is the methodoligy.
As per my knowledge, we need to expose those RFC's as webservices . Then we must be able to acces in hetrogeous environment from any third party applications..
Please revert back soon, It is very urgent.
Regards
Vijay

Ayyappa Raj,
Thanks for the reply.
Please let me the detailed information for implementing.
AS you said . I need expose the RFC's as webservice. This point is clear to me.
2) Use tthe JCo to connect and create client proxy.
Can u please elabrate the above point?
If u have any steps created in the document or url to refer. Please forward it to me.
Please forwar the document to this id "vijay00" in yahoo.
AS the sdn is not allowing to give the maill id i have given only the id details in yahoo.
I am new to this procedure.
Regards
Vijay

Is it possible to move the master data from one server to onther server?

is it possible to move the master data from one server to onther server?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Is it possible to export the html code from a muse site that I am building?

Is it possible to export the html code from a muse site that I am building?

Mac_Heibu has the right idea. When you export your site to HTML, it creates a folder that contains all of your pages. Here's an example of what the folder will contain. All of your HTML pages, all your scripts, CSS, and it'll also have individual folders WITHIN your main folder for your phone or tablet versions, if applicable. This method allows you to upload your files to an FTP host. However, if you're trying to upload it to an FTP, the BETTER option would be to go File > Upload to FTP Host. If this has helped you, please mark mac_heibu's answer as the Correct Answer, and feel free to mark my reply as a Helpful Answer.

Is it possible to delete the original photos from my iphone if i have uploaded them into the icloud?

Is it possible to delete the original photos from my iphone if i have uploaded them into the icloud?
Or are they then completely lost?

Yes. iTunes will report that your photos are now being accessed from iCloud Photo Library and will no longer sync photo and videos from your computer. If you have a Mac, you'll want to avoid enabling it until OS X Yosemite in introduced along with it's built-in photo app, which will have to ability to access iCloud Photo Library. (Note: the Photos app may not be introduced concurrently with Yosemite, but is supposed to follow "early next year".)

I want to call the DMM- SFP from Teststand using IVI

Hi I have a Teststand 3.0 system with a NI-PXI 4070, and I want to call the DMM-SFP from Teststand using the IVI driver architecture. Unfortunatley I cannot figure out how to link the DMM-SFP to the Logical name.

ADL,
If you are using the TestStand IVI step types, after you have added the logical name in MAX, you can insert an IVI DMM step type. Then right-click on the step and choose "Edit IVI Dmm". You should be able to choose from the Logical Name Ring Control the logical name you created in MAX.
If you haven't added the logical name into MAX, depending on what version of MAX you have, you can refer to Using Measurement & Automation Explorer 2.x to Configure Your IVI System or look in the IVI help that comes built into MAX 3.0.
If you checked there already or have another question, please let us know!
Regards,
Shannon R.
Applications Engineer
Nati
onal Instruments

Is possible to get the page name from the _pageid

Is possible to get the page name from the _pageid displayed in the url?
It must be stored in a portal oracle table does anyone know which ones or whether there is a api to translate the pageid.
Thanks in advance.

You have you execute this query, using both the numbers included in the parameter pageid:
select display_name from portal.wwsbr_all_folders
where caid = :first_number
and id = :second_number

Is it possible to call the members of the CFMapping dimension from a EVDRE?

Similar Messages

Maybe you are looking for