Is it possible to convert a FHD(full HD) recording to VGA quality?

I have made a video for a history website. This has been done in Full HD.Upload is becoming a problem. I need to convert the recording to VGA format. Or max HD format. Any guidance if this can be done on iMovie.? Thanks for all help

Unfortunately once a project has been set to HD it cannot be set back to SD, and elements that were created as HD cannot be used. And you also have PAL/NTSC issues. So ultimately you are facing a couple of issues here.
If you had SD assets you used in an HD project (maybe you made menus in Photoshop at SD) some elements may be used. For instance you can apply the menu templates to an SD project if the menu itself was not set as an HD asset and of course there are wrinkles.
For example my default settings on DVD SP is SD NTSC. I then selected to change to HD and built from there. Created a menu and set it to 1920 x 1080 and dropped a 1920 x 1080 image in there as background. Then in inspector changed to 720 x 480i size (no options for PAL sizes) and saved that as Template. It could be bought into an NTSC project. If I set the project to PAL (SD) before converting to HD the HD had PAL size options for SD menus, and saved that as template and you can apply to a PAL SD menu.
Of course there are wrinkles, such as if you added HD m2v streams as buttons in the menu, the converion will not work, so you would need to remove those elements before saving the template and it will probably work just for either NTSC or PAL (probably PAL in your case).
So bottom line, may be easier just to make NTSC and PAL SD versions.
Sorry about that.

Similar Messages

  • Its possible to convert Apple script to Java script

    Hi,
    Please Help me anyone to do that script.
    its possible to convert below mentioned Apple script to Java Script.
    Thanks in advance.
    Help me......!
    -yajiv
    Code:
    tell me to addImageLabels()
    on addImageLabels()
              tell application "Adobe InDesign CS5"
                        set numberAdded to 0
                activate
                        set enable redraw of script preferences to true
                        set currentFonts to (get name of every font)
                        if currentFonts does not contain fontname then
                                  display dialog "The font \"" & fontname & "\" is not active on your system." buttons {"Continue anyway", "Cancel"} default button 2
                        end if
                        tell document 1
      -- get a list of unique page IDs in this document
                                  set allpageids to my getPageIds()
                                  repeat with p from 1 to (length of allpageids)
                                            set pgid to item p of allpageids
      -- loop through these, getting a list of unique page item IDs to inspect
                                            tell page id pgid
                                                      set pageitems to (get id of every page item)
                                                      repeat with i from 1 to (length of pageitems)
                                                                set pid to item i of pageitems
                                                                tell page item id pid
                                                                          try
      -- certain boxes will fail to yield a content type, whatever
                                                                                    if content type is graphic type then
                                                                                              set c to class
                                                                                              set i to id
      -- get the name of the link, i.e. the filename, subject to labelFormat (full name, first six chars, etc.)
                                                                                              set gn to my getImageName(pgid, c, i)
                                                                                              if (gn is not "Empty") and (gn is not "") then
                                                                                                         set b to visible bounds
                                                                                                         set h to (item 3 of b) - (item 1 of b)
                                                                                                         set newtop to (item 1 of b) + (h / 2)
                                                                                                         set item 1 of b to newtop
                                                                                                         set w to (item 4 of b) - (item 2 of b)
                                                                                                         if w < minwidth then
                                                                                                                   set item 4 of b to ((item 4 of b) + 0.2)
                                                                                                                   set item 2 of b to ((item 2 of b) - 0.2)
                                                                                                         end if
                                                                                                         set l to (make new text frame at beginning of page id pgid with properties {visible bounds:b, fill color:fillcolor, contents:gn, label:"imagelabel"})
                                                                                                         tell l
                                                                                                                   tell paragraph 1
                                                                                                                             set justification to center align
                                                                                                                             try
                                                                                                                                       set applied font to fontname
                                                                                                                             end try
                                                                                                                             set point size to fontsize
                                                                                                                             set fill color to textcolor
                                                                                                                   end tell
                                                                                                                   set inset spacing of text frame preferences to ((insetspacing as string) & " in") as string
      fit given frame to content
                                                                                                                   set numberAdded to numberAdded + 1
                                                                                                         end tell
                                                                                              end if
                                                                                    end if
                                                                          end try
                                                                end tell
                                                      end repeat
                                            end tell
                                  end repeat -- allpageids
                        end tell -- document 1
      display dialog "Added " & numberAdded & " labels." buttons {okButton} default button 1 giving up after 10 with title scriptName
              end tell -- InDesign
    end addImageLabels
    on getPageIds()
              tell application "Adobe InDesign CS5"
                        tell document 1
                                  tell master spread 1
                                            set masterpageids to (get id of every page)
                                  end tell
                                  set docpageids to (get id of every page)
                        end tell
              end tell
              return masterpageids & docpageids
    end getPageIds
    on getImageName(int1, cla1, int2)
              tell application "Adobe InDesign CS5"
                        tell document 1
                                  tell page id int1
                                            if cla1 is rectangle then
                                                      set imagename to (name of item link of graphic 1 of rectangle id int2)
                                            else if cla1 is polygon then
                                                      set imagename to (name of item link of graphic 1 of polygon id int2)
                                            else
                                                      return "Unknown"
                                            end if
                                            try
                                                      if (labelformat is "First six characters") then
                                                                return (characters 1 thru 6 of imagename) as string
                                                      else if (labelformat is "Base name of linked file") then
                                                                set op to offset of "." in imagename
                                                                return (characters 1 thru (op - 1)) of imagename as string
                                                      else
                                                                return imagename
                                                      end if
                                            on error
                                                      return "Empty"
                                            end try
                                  end tell
                        end tell
              end tell
    end getImageName

    Yajiv:
    I realize English is probably not your first language, but you are not really making sense. Perhaps you could use more words and write in more detail.
    It seems you already have your script in AppleScript. Why do you need to convert it to JavaScript?
    It's going to be inconvenient at best and probably not worth anyone's time.
    Just use the AppleScript.

  • I have photoshop elements 10 for PC is possible to convert the license for MAC?

    I have photoshop elements 10 for PC is possible to convert the license for MAC?

    Good evening I do not have disc version, I by in Internet and attached I send the license number can I use?
    I have downloaded the version 10 but when I insert the license number the program say that is wrong.
    May I resolve the problem??
    byby
    Thanks
    Leandro Duranti
    [email protected]
    Il giorno 08/feb/2015, alle ore 01:15, Barbara B. <[email protected]> ha scritto:
    I have photoshop elements 10 for PC is possible to convert the license for MAC?
    created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/7173380#7173380>
    That depends. If you bought the disc version, you're good to go, since your serial number works on both platforms, so just install the mac version. If you lost the discs or your mac doesn't have a disc drive, you can download it here:
    Download Photoshop Elements products | 13, 12, 11, 10 <https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html>
    However, if you bought the windows version as a download, you're out of luck. Adobe does do a crossgrade, but for older versions you have to pay to upgrade to current version on the new platform, and that's more expensive than just buying it, if you search around for a good price.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7173380#7173380 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7173380#7173380
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email <mailto:[email protected]ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 47>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Is it possible to convert an app from 12c to 11g?

    I am using both 11.1.2.4 and 12.1.2.0.
    If I have an app built with 12.1.2.0, which does not include any 12c specific features, is it possible to convert it to 11.1.2.4?
    I am asking because I have a Development environment that is 12c, but a Production environment that is 11g and I am not sure we will be able to upgrade the Production environment
    Thanks in advance..

    It's possible but not an easy task. As 12c uses newer stuff you have to test everything with great care. You might find some things you have to rebuild add they won't work in 11.1.2.4.0 (e.g. components which are only available in 12c. If you read the what's new doc for 12c and you find something you have used, prepare to rebuild this part.
    First thing to try ids to open the project in 11.1.2.4.0 and see if you can compile and run the app.
    Timo

  • Is it possible to convert text captions to Smart Shapes?

    Hello,
    I have a collegue that is using Cp 5 to record software simulations which then need to be brought into Cp6. The problem is that our standards (for software simulations) employ Smart Shape call outs (not the Cp 5.5 and earlier text captions).
    Is it possible to convert these text captions into our themed Smart Shapes either automatically inside Captivate 6 or by modifying the content within the CPTx file?
    Thank you,
    Shawn

    Hello Lilybiri,
    As always you are awesome! :-)
    >I don't believe an automatic switch will be possible, because smart shapes are totally different objects.
    I understand because there are a huge variety of shapes in either format. But I suspect that it should be easy to convert a text caption from any style to one specified smart shape style.
    Actually, I am asking before the simulations get started. So nothing has been done yet. I am unsure what you are suggesting I should do in the preferences under Cp 5.5. Are you suggesting that there is a way to convert 'some format' of text callouts, in a Cp5.5 demonstration simulation, to Smart Shapes in Cp6?
    >but since you already have created the simulations, it has to be done manually. Hoping for you that
    >someone has a bright idea, but I do not see one immediately.
    For anyone else in this situation, it would be handy to have a solution (rather than painstakingly convert each manually).
    I am wondering if this might be a relatively easy search/replace within one of the xml files within the CPTx file. I'm going to look at this tonight.
    Thanks for your assist.

  • Is it possible to convert PDF file into HTML

    Dear friends
    Is it possible to convert PDF file into HTML. I have few hundread PDF files i like to convert this files into HTML. I hope it can be done through Java but i don't know how to start this coding. anybody can give me a brief idea to go ahead.

    Why do you want to do this yourself? I quick search on Google showed several utilities to do this, some freeware, some commercial.

  • Is it possible to convert to an AIFF file in itunes 10 and beyond, and if so what is the procedure?

    Hello.  Is it possible to convert to an AIFF file in itunes 10 and beyond, and if so what is the procedure? 
    I use FCP7 and often have a sound loop or the like that I need in AIFF format, I normally use itunes to do the conversion, but have heard that version 10 no longer performs this task...?
    Thx for the help!
    MBP 2.6 GHz Intel Core 2 Duo - Mac OS X 10.6.7 - itunes 9.2.1 (5)

    Doolittle wrote:
    I can't find convert to aiff as an option in itunes 10.
    It still works the same as in past releases.  Go to Edit > Preferences > Import Settings, and set "Import Using" to "AIFF Encoder," and then the option will be available.  Consult this document for details: 
    http://support.apple.com/kb/HT1550

  • Is it possible to convert *.doc to *.rtf in a java program?

    Hi :-)
    My challenge is to develop a web-app in ADF Faces. Now i verify some technologies to store mailmerge letters in an easy way. The user of my web-app should upload a MS Word mailmerge document and a csv data source file. My web-app must thereupon convert this two files to a pdf per csv-row and store it to a ftp.
    I have build a demo using the open office API. But now i want to try the same by using apache POI and FOP. I can merge the doc files with POI and i can create PDF with FOP.
    My problem is, that POI cant convert to a rtf file and FOP uses an rtf file to create a pdf. I dont know, if its possible to convert a doc file to a rtf file. If its possible, is there an API, which will help me out?
    Regards
    Majo
    btw...I am not sure, if its the right forum for my question :-/

    HeHe, no sorry. The binary file is the same, because Windows bind doc and rtf with MS Word, it opens the file, which you have renamed to *.rtf in MS Word. But as a doc document, not as a rtf file ;-)
    And i dont want to open the rtf file in MS Word. I want to process the rtf file in java.
    Thanks
    Majo

  • I have acrobat 11 standard is it possible to convert pdf files to word files ?

    I have acrobat 11 standard is it possible to convert pdf files to word files ? or is it just possible in the Pro version.

    It sounds to me like you're using Reader, not Acrobat. Make sure you open
    the PDF file in Acrobat, and then go to File - Save As Other - Microsoft
    Word.
    On Thu, Mar 12, 2015 at 2:55 PM, nickk23435928 <[email protected]>

  • Is it/shouldn't it be possible to order postcards with full image on both sides?

    Is it/shouldn't it be possible to order postcards with full image on both sides?

    Yes, you can create such a card.  This example is the folded Holiday Colors theme.  Just choose the layout for the inside that includes a full page photo on top and text on the bottom.
    OT

  • Is is possible to convert the movies purchased on itunes to DVD?

    Is is possible to convert the movies purchased on itunes to DVD? (In other words you would be burning the movie or tv shows to a blank DVD).

    You can store just what you want on the external. Just set up folders for what you want. I have a music folder, movies and TV shows, and pictures folders. I also have mine partitioned for OSX and Windows. I have a few files I need if I am running on windows so I keep them on the windows side. I always keep a back up of my documents and a few other files it is a pain to download on the external.
    You can also copy every folder and file on your machine to the external if it is big enough. This is a true copy not a back up file generated by a back up program. I like to do this if I get adventuresome and plan to do some major experimenting with my software. Saves having to reload everything if it crashes.
    TTFN
    Doc

  • Re: Is it possible to convert several licenses  to one shared license

    Re: Is it possible to convert several licenses  to one shared license?

    Hi Signe Hansen,
    You cannot convert several retail license to volume.
    Regards,
    Romit Sinha

  • I am using sound and vibration assistant 7.0. I want to know if it is possible to convert the mag and phase plot to real and imaginary plots ??

    I am using sound and vibration assistant 7.0 . I am using the impact test example given . I want to know if it is possible to convert the magnitude phase plot to real and imaginary plot in the sound and vibration assistant 7.0 ???

    If you have LabVIEW, you can create a user step to perform the conversion in version 7.0. Sound and Vibration 2009 has a checkbox in the Frequency Response configuration page to export the real and imaginary components. Short of upgrading SVT, you can also install the evaluation version of NI LabVIEW SignalExpress 2009, and this will also upgrade the Frequency Response Step which is shared between the two products (but then you don't get all the other features that were also added in SV 2009).
    Here are some links that may be useful to help decide whether you want to upgrade:
    http://www.ni.com/soundandvibration/
    http://www.ni.com/labview/signalexpress/
    Doug
    NI Sound and Vibration

  • HT2619 is it possible to convert a mp3 file in a text?

    is it possible to convert a mp3 file in a text in final cut?

    Huh?
    You can use iTunes or QuickTime Pro to convert an MP3 file into an AIF file for use in FCE.  But convert to a text file?  I don't think so.  But if that is what you really want to do, look here: https://www.google.com/search?client=opera&q=mp3+to+text&sourceid=opera&ie=utf-8 &oe=utf-8&channel=suggest&gws_rd=ssl
    -DH

  • Is it possible to convert .doc to pdf  ?

    Hi..
    I am very new to Livecycle Workflow...! I just want to know whether it is possible to convert .doc to pdf  ?
    Just by googling i came to know that CreatePDF2 Service will do this Conversion ! But it throws me an Exception like "Conversion Exception :" Cannot connect to Adobe Service "...!
    Can u guys pls help me out to slove the problem ?
    Thanks & Regards
    Karthik.

    you don't know the format of a word doc? well, that's good for you because it's a nightmare.
    - check POI (http://jakarta.apache.org/poi/index.html) to see if you can load-up the .doc then generate the .pdf with iText
    - personally i use the Open Office Bean to open the .doc, i save it in .sxw (OO format which is a jar of different XML files), then i use XSLT to transform content.xml in .fo then use FOP to build the PDF. sounds crazy but works fine (only on a machine with graphic support - not via Telnet, etc...)

Maybe you are looking for