Is it possible to debug WL Server via a JPDA

Is it possible to debug WL Server via a JPDA debugger (such as Kamira
Bugseeker) when WL Server is running as an NT Service? Are there
recommended changes to the cmdLine parameter in installNtService.cmd (its in
the samples)?

Similar Messages

Debugging WL Server when its an NT Service ...

Is it possible to debug WL Server via a JPDA debugger (such as Kamira
Bugseeker) when WL Server is running as an NT Service? Are there
recommended changes to the cmdLine parameter in installNtService.cmd (its in
the samples)?
I've tried supplying command line parms
-ms64m -mx256m -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt
_socket,server=y,suspend=y,address=8000 -classpath "..."
-Dweblogic.Domain=MyStuff -Dweblogic.Name=myAppServer -Djava.security.policy
=="d:\bea\wlserver6.0sp1\lib\weblogic.policy" -Dbea.home="d:\bea"
weblogic.Server
in the Service / <my name > / Parameters / cmdLine registry entry but it
seems to take FOREVER to come up. Any clues?

No entries at all about this in
D:\bea\wlserver6.0sp1\config\energizer\logs\weblogic.log or
D:\bea\wlserver6.0sp1\config\energizer\logs\access.log
Nothing in NT Event Log either.
Arg!
Could this be a command-line length limitation of some sort?
"Predrag Stanar" <[email protected]> wrote in message
news:[email protected]...
On Thu, 12 Jul 2001 14:06:29 -0400, "Howard Hoffman"
<[email protected]> wrote:
When I tried it, WL no longer starts as a service. I get an error box
from
the W2K Services applet: [Note my server is named Energizer]
"Could not start the Energizer service on Local Computer.
The service did not return an error. This could be an internal Windows
error or an interal service error.
If the problem persists, contact your system administrator"
The Event Log has no entry at all for the error.
My cmdLine entry in the Service registry entry has 968 characters:
-classic -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socke
>
t,server=y,suspend=y,address=8000 -Dweblogic.Domain=energizer -Dweblogic.Nam
>
e=energizerAppServer -Djava.security.policy=="d:\bea\wlserver6.0sp1\lib\webl
>
ogic.policy" -Dbea.home="d:\bea" -Dincentivesystems.xsl.location=d:\bea\wlse
rver6.0sp1\config\energizer\applications\energizer -classpath".;d:\bea\wlserver6.0sp1\config\energizer\lib\xerces.jar;d:\bea\wlserver6.0s
>
p1\config\energizer\lib\xalan.jar;d:\bea\wlserver6.0sp1\config\energizer\lib
>
\jaxp.jar;d:\bea\wlserver6.0sp1;d:\bea\wlserver6.0sp1\lib\weblogic_sp.jar;d:
>
\bea\wlserver6.0sp1\lib\weblogic.jar;d:\bea\wlserver6.0sp1\lib\ejb20.jar;d:\
>
bea\wlserver6.0sp1\config\energizer\lib\ldapjdk.jar;d:\bea\wlserver6.0sp1\co
>
nfig\energizer\lib\junit.jar;d:\bea\wlserver6.0sp1\config\energizer\lib\log.
>
jar;d:\bea\wlserver6.0sp1\config\energizer\lib\classes12_01.zip;d:\bea\wlser
ver6.0sp1\config\energizer\lib\energizer-startup.jar" weblogic.Server
Note that I am in fact running WL SP2, despite the directory names.
Any and all help appreciated.Take a look at weblogic.log file. Any error there?

How to read enumerated values from an OPC server via Datasocket

Hi Labviewers,
I am using LV8.2 and I am trying to find if it is possible to read enumerations from an OPC server via Datasocket, not just the values.
I can successfully read a value for an OPC server via Datasocket and I get a value for example 3, is it possible to get the enumeration/string that corresponds to this value i.e. "Open".
Many thanks in advance
Dimitris

Hi Sarah,
With the input type as variant I get the following response:
1                                     <-This is the current numeric value of the parameter
4 Attribute(s):
   'Quality' -> 192
   'TimeHigh' -> 29861723
   'TimeLow' -> -665408304
   'Timestamp' -> 39.238E+3
With the Input set to         Enum constant I get no values or strings coming back. With the Input set to             Ring constant I just get the numeric value
Dimitris

ITunes media on Linux server via SMB - slow imports, changes and stalls

I have an unRAID server (lime-technology.com) which is a Linux based server. I'm getting terrible performance with iTunes. The music playback is fine. But if I import a song file or change any metadata, it has problems. This isn't new, I've read many, many posts complaining about this and other problems concerning SMB shares and file systems. But I think I may be onto something and would like some advice.
This is what I've found so far. Snow Leopard, OS 10.6.x, has a problem with SMB and/or any file system other than HFS+. HFS+ is the common files system for OS X.
There are hundreds of posts on the web complaining about temporary freezes, slowdowns, sometimes crashes with SMB shares and other file systems. I have yet to see Apple acknowledge that there is a problem, but there are a few suggestions out there that seem to have helped people. I'll be trying out some of these this week and post the results here.
From my own observations, specifically with iTunes, I've noticed some strange behavior. Here's my setup. I have an iMac running 10.6.4 (the latest update), the latest iTunes 10. The iTunes app is located on the local internal HD, I have my iTunes library files and all my media on disk 1 of my unRAID server. I'm hard wired to the server via a gigabit router. I have iTunes set to keep the media organized and copy the media files to the server.
When importing a song file into iTunes, the file initially seems to copy at a good rate, the file appears in it's proper place and you can see the size increasing as it copies. Then it stalls for a while, then the name changes to a long hex number for a few seconds and then reverts back to its' normal state. The process can take 30-40 seconds, even with a small song file. I looked at the console and I got the following error message:
Quote
+11/8/10 12:24:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[2820] Possible unresolved transaction race -103/(Master Music Library/John Lennon/Rock 'N' Roll,(null))+
The same thing happens when I make a change in the metadata. For example, I added onto the name of an album and for each song it changed I got:
Quote
+11/8/10 12:37:36 AM /Applications/iTunes.app/Contents/MacOS/iTunes[2820] Possible unresolved transaction race -103/(Master Music Library/John Lennon/Signature Box Set 5 - Walls And Bridges,(null))+
This happens for each file imported or changed even within iTunes.
I followed the first path in the error message: /Applications/iTunes.app/Contents/MacOS/iTunes[2820].
In the /Applications/iTunes.app/Contents/MacOS/ folder I find the following files:
iTunes
libgnsdk_musicid.1.7.1.dylib
libgnsdk_sdkmanager.1.7.1.dylib
libgnsdk_submit.1.7.1.dylib
where iTunes is a Unix Executable File.
I did some more research and have found some posts about file systems other than HFS+ having trouble with app packages. I believe that all OS X apps are actually packages, like folders, but appearing as a single file. Other file systems don't seem to know what to do with these. There was some talk of "flattening" these app packages, but I haven't gone forward with that yet because I'm not sure I understand it enough yet.
I've also noticed that in the getinfo box under sharing & permissions I usually get "You can read and write", but with apps I get "You have custom access". This was something i had noticed before and thought it was a problem on the server, but I didn't realize it until now, I'm getting the custom access on every app. So I think that's probably normal.
I'm wondering if I'm having a permissions problem with the iTunes Unix Executable File. Right now the permissions are set as follows:
system: Read & Write
admin: Read & Write
everyone: Read only
Maybe it's trying to write to that file or another one and doesn't have the right permissions since the song file is now on the server and that's causing the stalls? I'm over my head here. Anyone have any ideas?

I have the same problem with Excel files on an external drive. The drive is attached to my computer which is on a network and another user accesses the external drive. The problem of "custom access" began after our main server went down. I hope someone can come up with a solution so that I can set the permissions. For now the Excel files are all read only.
Linda

How to Connect to Oracle 9i database server via Oracle 10g XE

I have installed Oracle 10g eXpress Edition and uninstalled Oracle 9i client database. I used Oracle 9i client to connect to another Database server on a local LAN. Is it possible to create a database link to the old Oracle 9i database server via Oracle 10g XE? If yes, do I need to add ODBC drivers?
I want to achieve the following:
1) Create a connection to the Oracle 9i database server using Ora101040 odbc drivers.
2) Use a similar 9i tool (Enterprise Management Console) within Oracle 10g XE to access Oracle 9i Database tables on a LAN network.
3) Create data access to Oracle 10g XE via some ODBC connection from a C++ runtime application.
Hope to receive help from Oracle professionals.
Thanks.

I have installed Oracle 10g eXpress Edition and
uninstalled Oracle 9i client database. I used OraclePlease clarify - you uninstalled the 9i database or the 9i client.
9i client to connect to another Database server on a
local LAN. Is it possible to create a database link
to the old Oracle 9i database server via Oracle 10g
XE? If yes, do I need to add ODBC drivers?
Database links between Oracle databases do not require ODBC. They do require Oracle Networking (included with both Oracle9i Database and Oracle Database 10g XE) to be configured correctly.
It is also possible to connect ot the 9i database using the 10g Instant Client (separate download)
I want to achieve the following:
1) Create a connection to the Oracle 9i database
server using Ora101040 odbc drivers.Please clarify - what client do you wish to run that needs ODBC?
2) Use a similar 9i tool (Enterprise Management
Console) within Oracle 10g XE to access Oracle 9i
Database tables on a LAN network.XE does not have an equivalent to Oracle Enterprise Manager. XE does come with HTMLdb preinstalled and configured, and HTMLdb provides a subset of the administration capabilities of Enterprise Manager.
3) Create data access to Oracle 10g XE via some ODBC
connection from a C++ runtime application.You can download ODBC drivers from the same location on OTN you downloaded XE. I do not know whether XE includes ODBC drivers. ODBC drivers will usually still require you to configure the Oracle Networking.
There are a number of items that make me believe you do not have a good grasp of Oracle architecture and basics. If true, I encoureage you to start reading the Concepts manual found for the database at http://docs.oracle.com, or at least the O'Reilly book 'Oracle Essentials' found at http://oracle.oreilly.com

Is it possible to debug a Job which already executed in the Background.

Hi Friends,
My Z program has a bug when run it in Quality System.
If I run this program in foreground to debug, its giving TIME OUT dump.
If i try to run it in Background and started DEBUG mode using JDBG.
Still one of the table fetch gives TIME OUT dump.
Is there any possibility to DEBUG the already executed job?
Regards,
VIJI

Hi,
If the job is running go to SM50..
Select the process:
In the menu..Program/session -> program -> debugging..
OR
Fix the break points.
2) Create job.
3) Go SM37
4) Select the job and write "jdbg" in command line.
1) Use Transaction SM50. This would give you a view of all the background
processes running in the server.
2) Choose your background process from the list and got to
MENU "Program/Mode"->"Program"->"Debugging".
Regards,
Suresh Kumar

Running Java on a server via a PERL script

Had a quick glance through the forums but couldnt find anything that answered this query.
I'm trying to call Java to compile and run on a server, via PERL (the Java files are command line run only)
I've tried using the following method, but it doesnt work.
$javac = "javac <full path to Java file on the server>/somejavafile.java";
$java = "java <full path to Java file on server>/somejavafile 8";
system($javac);
system($java);Does anyone know where I might be going wrong, and hopefully point me in the right direction?

>
$java = "java <full path to Java file on
server>/somejavafile 8";Possibly this should be
java -classpath <full path to base of your package package> your.package.YourClass

Connection between SMD Agent and SMD server via SAProuter

In our scenario, we have to setup the connection between SMD agent and SMD server(solution manager server) via saprouter. But during the installation of SMD agent, we can only specify the hostname of the managing system, we have no place to add saprouter string(/H/..../H/). I I am not sure if we could connect the agent and server via saprouter, if so how to do it?
Hope someone can give us your precious advices on this issue.
Karl

Perfect; and thanks for your response. I found this help page for developers to implement P4 support over SAP router: http://help.sap.com/saphelp_nw73/helpdata/en/48/2992d7ad8758d7e10000000a421937/content.htm
But in the SM Diagnostics Setup options I can set up only a direct HTTP adresses and have no options to set up connections over a sap router to P4 ports directly. I can at the moment only solve my problems with NAT or firewall rules.
And also the diagnostic agent setup has no options to config a proxy or sap router. I found yesterday a blog on sdn side with screenshots of the setup with all available connection opetions to SLD... sry I can not post this link today.
This is an official statment of SAP from the current version of SMD guide; it is also possible but why not from the beginning???:
In some network conficurations, the Diagnostics agent has to connect to the Managing system though a SAP router.
This feature will be fully supported in Solution Manager 7 Ehp2 (7.02).
In order to enable this feature in Ehp1, please contact the Diagnostics Agent support team to get information on how to
setup the agent and on which patch level you can perform the installation.
This thread were a long time not answared; proxy and routing connections are mostly stepmotherly handled by SAP; this is also a problem by set up of automatic RFC generations in SMSY; why there are in the setup assitents no options to set up the router string.
I have absolutly no comprehension for this in year 2011. All this technics are good known and long time tested.
In this case the f**k has provoked an answare to this thread and this is what I expected; but sorry for my style You are right I could also writh why the heck
FAQ:
SMD root side on SDN: http://service.sap.com/diagnostics
SM FAQ: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4e49dbea-0c01-0010-91bd-f0b61388c9ae
SM Setup Home: http://wiki.sdn.sap.com/wiki/display/SMSETUP/Home
SM Diagnostic Troubleshooting Guide: https://websmp201.sap-ag.de/~sapdownload/002007974700000409092009E/DiagAgent_TroubleShooting.pdf
SMD Candidate Setup: http://wiki.sdn.sap.com/wiki/display/SMSETUP/Diagnostics+Agents

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

Error when adding an Object to the server via CMS

I am trying to upload a new report to the server via CMS.
I click on Objects > Browse for the report > Click Submit
After a few seconds, I get the following error:
There was an error while writing data back to the server: File Repository Server error : File system operation for frs://Input.reportingdb/a_068/047/000/12100/172659d5862b3e2.rpt on File Repository Server failed. If the problem persists, please contact your system administrator for event log information.
I can see that the Input.reportingdb server is running
I have tried restarting the physical server that CRE XI R2 is running on.
I have restarted the Tomcat as well as all of the report servers via ccm.sh and enabled all of the report servers via ccm.sh

Yes, the installation directory is:
/opt/crystal/bobje
The directory where the repository is located:
data
Here are the permissions:
drwxr-xr-x 14 oracle oinstall    4096 Mar 24 16:10 data
Here are the permissions of the subdirectory:
drwxrwxrwx    2 oracle oinstall 4096 Jul 22 2008 Auditing
drwxrwxrwx    2 oracle oinstall 4096 Jul 22 2008 cacheserver
drwxrwxrwx   11 oracle oinstall 4096 Mar 26 09:50 frsinput
drwxrwxrwx   60 oracle oinstall 4096 Mar 24 16:11 frsinput_bak
drwxrwxrwx 259 oracle oinstall 12288 Mar 24 09:54 frsoutput
drwxrwxrwx    2 oracle oinstall 4096 Jul 22 2008 pageserver
drwxrwxrwx    6 oracle oinstall 4096 Mar 24 09:54 procSched
drwxrwxrwx    2 oracle oinstall 4096 Mar 24 12:07 reportingdb.cacheserver
drwxrwxrwx    3 oracle oinstall 4096 Mar 24 12:07 reportingdb.pageserver
drwxrwxrwx    2 oracle oinstall 4096 Jul 22 2008 reportserver
drwxrwxrwx    2 oracle oinstall 4096 Jul 22 2008 wcs
I have tried multiple times to re-start and re-enable the File Repository and get the error.
Is there a way to reinstall ONLY the File Repository server?

Can no longer connect to remote server via VPN

I recently installed OS 10.5.8, and have found that I can no longer connect to my server at work. The VPN itself (via PPTP) works fine, it's just that when I try to connect to the remote server (via Connect to Server) I get a dialogue saying 'A volume failed to mount.' A further dialogue says 'Sorry, the operation could not be completed because an unexpected error occurred. (Error code -6602)'
Has anyone found a way around this, please? I'm disabled and I need to be able to work from home – without the connection I'm stuffed! Obviously I've tried rebooting the machine etc, but nothing seems to help.
Thank you for any assistance you can give.
Kitty.

For some random reason this connection has begun working again – please ignore the question!

Static NAT causes unable to access server via internal IP

Hi all,
Need some help. I running site-to-site IPsec VPN in Cisco 2811 IOS 12.4 both site. Here I encounter a problem to access server on Site A from Site B
Site A having Leased Line connected to router with Public IP. I have done static mapping 1 web server to Public IP (NAT). This to allow external users to access the server via Public IP. At the same time, users at Site B would need to access to same server via Internal IP since they have Site-to-Site VPN established. But once I done Static Mapping (NAT), user at Site B unable to access the server at Site A using its internal IP. But external user can access server via Public IP. What went wrong here. Do i need to add extra command to get this done? We really need this.

Hi sheik,
I'm accessing the server form Site B using its server's LAN IP.
If I remove the static NAT statement from my router at Site A, everything works well. I can access the server from site B using its LAN IP via Site-to-Site VPN. But in this case, external users unable to access server via Public IP since no Static NAT statement.

Problem with Connection to SQL Server via Servlet (in iPlanet 6 App Server)

Hi ,
I am using the iPlanet ApplicationServer 6.0 SP2 for development & testing of an internet application.
I am facing a problem when I am trying to connect to MS SQL SERVER via the native jdbcodbc driver (obdc32.dll). The error is something like this :
[26/Jul/2001 11:50:35:7] warning: DriverConnect: (28000): [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '\'.(DB Error: 18456)
[26/Jul/2001 11:50:35:7] warning: ODBC-027: CreateConn: failed to create connection [new connection]: DSN=fadd,DB=cashbook,USER=test,PASS=xxxxxxxxx
[26/Jul/2001 11:50:35:7] error: DATA-108: failed to create a data connection wit
h any of specified drivers
Error in connecting to the Database for cirrus :java.sql.SQLException: failed to
create a data connection with any of specified drivers
java.sql.SQLException: failed to create a data connection with any of specified
drivers
at com.netscape.server.jdbc.Driver.afterVerify(Unknown Source)
at com.netscape.server.jdbc.Driver.connect(Unknown Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown Source)
at gefa.util.DBConnection.jdbcConnectionOpen(DBConnection.java:65)
at gefa.servlet.ServUpload.doPost(ServUpload.java:45)
at gefa.servlet.ServUpload.doGet(ServUpload.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
I have configured a DSN with the name "fadd" on the machine with the application server and it used NT authentication. I have supplied an NT userid and password that has appropriate rights on the database "cashbook".
When I write a java standalone program, it does connect but via a servlet it does not connect.
Can some guide me with this problem please ?
Anything one might have observed in the past ? (may be specific to iPlanet ?)
Thanks a lot in advance
~Sunil

I'm using iPlanet App server as well and experiencing similar problem. I load my SQL Server driver by Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver"), then use DriverManager.getDriver() to obtain the Driver.
However, the Driver returned is not the SQLServerDriver as expected. The Driver returned is com.netscape.server.jdbc.Driver! And then when I do Driver.getConnection("jdbc:microsoft:sqlserver://MyServer"), it throws an SQLException saying that it doesn't accept a jdbc:microsoft:sqlserver subprotocol. Well, of course it doesn't, it's not a microsoft Driver at all.
I suspect the problem is that the netscape Driver's acceptsURL() method ALWAYS returns true in iPlanet app server, thus when you getDriver(), the netscape Driver is always returned (and always returned as the first one since it's default?). Thus even though the same piece of code works fine as a standalone application, it just doesn't work on iPlanet app server.
My work around is:
Class.forName("my.Driver");
Enumeration enu = DriverManager.getDrivers();
Driver useThis = null;
while (enu.hasMoreElements()) {
Driver d = (Driver)enu.nextElement();
if (d.getClass().toString().indexOf("my.Driver") > -1) {
useThis = d;
Mind that my above code does not have an performance issue. If you look into the source code of how DriverManager get a Driver for a particular URL, it also loads the whole set of available Drivers, then call acceptsURL() method on each of them to find the first "suitable" one. Thus time complexity is the same.
I know this is not a very elegant solution and it defeats the purpose of having a DriverManager. Does any one else has a better way to solve this problem, like a way to specify the priority of each Driver so that SQLServerDriver is returned before the netscape Driver?
Thanks a lot.

Is possible to install Application server 7 on SuSE linux 9.0

is possible to install Application server 7 on SuSE linux 9.0

Actually, this might not be the case since version 7 is based on native implementation of web container while version 8 is based on Tomcat (i.e. pure Java implementation). So, version 7 will definitely be more prone to platform specific issues.
Just something to have in mind...

Is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license

is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license
Sql fire is my machine
Oracle is another machine
When i connect sqlfire with oracle using DBsynchronizer It shows the error message as Wan is not supported for default license
When i connect Sqlfie(my system) with oracle( another system) using JDBC Rowloader .nothing is happening after some time it shows the error like"time out for pool connection to archive database.When i increase the time out also nothing is happening.
what is the reason for above two errors(I stated in the pragraph.)
is it beacuse of wan netwrok not supported by default evaluation license?
could you please explain?

I don't think this has anything to do with a VMware product.

Is it possible to debug WL Server via a JPDA

Similar Messages

Maybe you are looking for