Is it possible to have a clickable hyperlink as a field under Products?

As the subject says, is it possible to have a clickable hyperlink setup as a field in the Products table somehow? Basically I have a field that automatically constructs a hyperlink based on an assignment and I'm wondering if there is a way you can set it up so that you can just click on it and have it open up Internet Explorer as opposed to having to copy the link and paste it in a browser.
Thanks!

Ryan,
Have you looked into trying to use the Web Pane URL for your scenario?
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/8c/ca6d92fe624549a2809c8d02ab063c/frameset.htm">Web Pane URL</a>
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/43/79696a7c9c6fcae10000000a1553f6/frameset.htm">Web tab</a>
This will allow you to create a URL to search Google for example based on the data contained your fields/attributes. You need to create the custom URL in the Console and then activate the option from the configuration settings in the Data Manager. This will then activate the Web tab for this link, all internal to MDM.
Let me know if you need more detail.
Thanks,
Tim

Similar Messages

  • Is it possible to have Auxiliary Cost Component as Value Fields in COPA

    Respected Gurus,
    Is it possible to have Auxiliary Cost Component as Value Fields in COPA - Please Advise?
    Thanks
    PM

    Hi Praveen ,
    It is possible.. in Transaction KE4R .. we have to specify the cost component structure .. where you map the cost components with value fields..
    Please use your auxiliary Cost Comp Structure in KE4R to achieve your purpose
    Regards
    Sarada

  • Is it possible to have the background colour of a field change based on the entry?

    I previously obtained help from a user here to create a script that autopopulates a field based on options selected in two sets of radio buttons:
    var consequence = this.getField("Consequence").valueAsString; 
    var likelihood = this.getField("Likelihood").valueAsString; 
    if (consequence=="Insignificant" && likelihood=="Rare") event.value = "Low"; 
    else if (consequence=="Insignificant" && likelihood=="Unlikely") event.value = "Low";
    else if (consequence=="Insignificant" && likelihood=="Moderate") event.value = "Low";
    else if (consequence=="Insignificant" && likelihood=="Likely") event.value = "Low";
    else if (consequence=="Insignificant" && likelihood=="Almost Certain") event.value = "Moderate"; 
    else if (consequence=="Minor" && likelihood=="Rare") event.value = "Low"; 
    else if (consequence=="Minor" && likelihood=="Unlikely") event.value = "Low";
    else if (consequence=="Minor" && likelihood=="Moderate") event.value = "Moderate";
    else if (consequence=="Minor" && likelihood=="Likely") event.value = "Moderate";
    else if (consequence=="Minor" && likelihood=="Almost Certain") event.value = "High"; 
    else if (consequence=="Moderate" && likelihood=="Rare") event.value = "Low"; 
    else if (consequence=="Moderate" && likelihood=="Unlikely") event.value = "Moderate";
    else if (consequence=="Moderate" && likelihood=="Moderate") event.value = "High";
    else if (consequence=="Moderate" && likelihood=="Likely") event.value = "High";
    else if (consequence=="Moderate" && likelihood=="Almost Certain") event.value = "Critical"; 
    else if (consequence=="Major" && likelihood=="Rare") event.value = "Low"; 
    else if (consequence=="Major" && likelihood=="Unlikely") event.value = "Moderate";
    else if (consequence=="Major" && likelihood=="Moderate") event.value = "High";
    else if (consequence=="Major" && likelihood=="Likely") event.value = "Critical";
    else if (consequence=="Major" && likelihood=="Almost Certain") event.value = "Extreme"; 
    else if (consequence=="Catastrophic" && likelihood=="Rare") event.value = "Moderate"; 
    else if (consequence=="Catastrophic" && likelihood=="Unlikely") event.value = "High";
    else if (consequence=="Catastrophic" && likelihood=="Moderate") event.value = "Critical";
    else if (consequence=="Catastrophic" && likelihood=="Likely") event.value = "Extreme";
    else if (consequence=="Catastrophic" && likelihood=="Almost Certain") event.value = "Extreme";
    // etc. 
    else event.value = ""; 
    I'm wondering if its possible to have the colour of the field that uses the above script, change based on the entry. E.g. If the answer is Low; make the background colour Green; if its Moderate, make it orange etc.?
    I know its a big ask but thought I would check.
    Thanks in advance.

    One approach would be to have access to a Mac that can run the classic environment or has a pre OS X native installation. These should be able to read the files for dates of creation/modification. There is also SheepShaver that runs on OS X machines.
    https://www.macupdate.com/app/mac/20615/sheepshaver
    http://en.wikipedia.org/wiki/Classic_Environment
    http://www.everymac.com/systems/by_capability/macs-that-support-macos-9-classic. html
    https://discussions.apple.com/message/22597899#22597899

  • Is it possible to have one search box search many fields? ( and "autocomplete" the results)?

    I'm really new to the whole area of JSON, autocomplete and javascript. My first project in this area is personal: making it easier to search for wines in my wine cellar.
    I have all my wines in a sqlite database (driven by CF 9 of course) and have a nice UI to report on, add, modify, delete, etc.  What I want to add is a search capability that works like this:  a user types text in a search box in any order they want and automagically, the wine is found. 
    To be specific, a user could start with "2005 Caymus" and the area below the text search box would be populated with all of the varietals of Caymus for 2005 that are in the cellar.   Similarly the user might start the search by typing "2005 Cabernet" in which case anything in the cellar that is from 2005 and a Cabernet Sauvignon or a Cabernet Franc from all wineries would appear below the text box. Or maybe they just want to see what French wines are in the cellar, so they'd start their search with "France" or "French". (BTW,  winery, vintage, wine type (varietal), country, appellation, etc. are all separate fields in the database/table.)
    Is my imagined search capability possible, or does each aspect of the search (year, winery, wine type/varietal) have to be user-entered into a separate text box?
    Any guidance/answers greatly appreciated!  If you're local, might even be worth sharing a vintage bottle of wine!

    Sorry I was unclear.
    Google is a single text box.  If you type "coldfusion 9 new features"
    you get a good listing of your results without having one box for
    software one for version one for descriptor and
    one for topic .  Similarly with Google it's likely you'll get
    somewhat similar results typing in "new features coldfusion 9" or
    "coldfusion 9 features".  So for my wine app I just want to present the
    user with one box so they can type in "Caymus 2005 Cabernet Sauvignon"
    (a "specific" search) or "2005" (a search for all wines from that year),
    etc.  It's the cleanness of the user experience I'm trying to
    accommodate here.    Make sense?

  • HT5114 Is it possible to have a student account for a child under 13?

    Do you have to be 13 a student itunes account?

    A child have to be 13 to have an iTunes Store account of his or her own, yes. If you have a child under 13, you will need to create and manage the account for them yourself.
    Regards.

  • Microsoft Word 2007 - Clickable Hyperlinks in Headers/Footers

    Hi there,
    I am in the process of creating a site document for a client and as it is in electronic format, I am using bookmarks and Hyperlinks to help readers navigate the document more easily.
    The problem I am having at the moment is with the documents footer. Basically, I would like to have a clickable hyperlink at the bottom of each page that will return the user to the contents page when it is clicked.
    Unfortunately though, I have not been able to work out how to this as the link is not clickable once the footer editor has been closed. Converting the document to PDF has not solved the problem either as the conversion removes the hyperlink completely.
    Surely this functionality in a document is not uncommon? I have done a fair amount of web searching about this but have not come across any real solutions yet. Manually placing a test box with the link on each page is not an acceptable solution either
    as this is a large document and will likely be edited/revised in the future.
    Any help with this would be much appreciated :-)

    I tried this but didnt work for mr. Can you help? How did you PDFed??
    It works for me in Word 2010 (or later) using Save As PDF. It did not work in Word 2007 using the Adobe Acrobat PDF printer nor using Word 2007's save as pdf utility. (The hyperlink showed up but was not active.) It did work using the Acrobat tab in Word
    2007 (this requires Adobe Acrobat).
    I did this by:
    first creating the text box with the hyperlink in the body of the document and moving it into the footer area (but still not in the footer itself).
    Then I used the Format tab of Text Box Tools and the Postion button (More Layout Options).
    I gave it an absolute vertical position relative to the page.
    Then I cut the text box, went into the footer, and pasted it there.
    It might have worked to just create the text box in the footer itself.
    I personally prefer it that the header and footer are not part of the active page when I am typing. This hyperlink is not clickable in Word without going into the header/footer view and I'm fine with that. The QAT workaround is just fine.
    Charles Kenyon Madison, WI

  • Is it possible to have sorting by group and checkboxes in the same ALV

    Hi there,
    Does anyone know whether it is possible to have sorting and group on one field in ALV and checkboxes set on another field in ALV?
    eg.
    Fieldname
    ===========
    Name----
    Text
    Allowance----
    Numeric -> Sort & Group
    Verified----
    Checkbox
    How do I code it if it is possible to have grouping and check box all in one ALV.  Meaning I want some data that are the same to merge using sort, while still having the checkbox available for my other field (Verified).
    Thanks in advance.
    Lawrence

    hi,
    GROUP BY clause is used on database tables with select statement.
    sort is used on internal tables.
    can u clearly explain y u need group by and sort on the same field.
    if u are extracting from dbtable using grou by clause on a field, then no need to sort it again.
    if u want sort u can do it by giveing "sort itab by field". thats not a problem.
    now coming to check box.instead of using SLIS type field catalog, u use LVC type.
    in LVC_S_LAYO, u can fine box_fname.
    while defining layout, u declare a variable of type LVC_S_LAYO
    AND GIVE BOX_FNAME = internal table field name

  • Livecycle Designer 8 - Is it possible to have button to clear fields after user has clicked submit by email button so user can reuse form to send another response with different answers?

    Users will use form to fill in stats for enquiries so they want to keep form open, complete a form, click button to submit by email, then click another button to clear form, form now ready to accept form's responses.  They dont' want to keep opening form each time form needs to be completed.
    Hope you help.
    Thanks Sandra

    Hi,
    Thanks for your response, not sure what you mean by a loop.  I put together
    a draft form to show staff in our Knowledge Centre the sort of thing
    Livecycle Designer can do.
    (See attached file: Library  Request  Form_pub_0001.pdf)
    They are currently writing out on form and manually putting into excel to
    keep stats on the requests.
    Due to current Global Financial Crisis my section does not want to spend
    extra money at the moment seeking assistance from our tech heads.  So we
    are looking for least work no expense option for keeping stats.  I am a PA
    who just happens to have Livecycle program on my computer.
    We use Lotus Notes so I thought the staff could save copy of Library
    request form in the stationery folder.  The staff using the form want to be
    able to do the following:
    1. open the Library request form at the beginning of the day;
    2. when a request comes in, complete the form and click on Send by email
    button
    3. click on a Clear Data button to clear all data from all fields so the
    form is open ready for when the next request comes in.
    Staff are time poor and, as this is only one of their numerous duties, they
    don't want to keep going to a location and opening a file which can be very
    slow on some days
    Each day form may be filled out by approximately 15 staff who may receive
    anything from 0 - 4 requests a day.
    I am not a tech head so script writing is a deep, dark mystery.  Can you
    help using the form above as an example for achieving step 3 above.
    Thanks,
    Sandra Smith
    Personal Assistant
    PricewaterhouseCoopers Australia
    Office: ++61 (2) 8266 9069
    Fax: ++61 (2) 8286 9069
    [email protected]
    http://www.pwc.com/au
                                                                                    Kacyndra                                                 
                 <[email protected]                                        
                 >                                                          To
                                           Sandra K Smith/AU/TLS/PwC@AsiaPac
                 08/08/2009 12:25                                           cc
                 AM                                                                               
    Subject
                                           Livecycle 
                 Please respond to         Designer 8 - Is it possible to have
                 clearspace-200985         button to clear fields after user
                 0098-481178-2-216         has clicked submit by email button
                 [email protected].         so user can reuse form to send 
                     adobe.com             another response with different
                                           answers?                                                                               
    if i understand this correctly, you just want everything cleared whena
    buttons is pressed?
    you can either do it individually:
    on button click:
    mytextField.rawData=""
    or do a loop, using child/paretns..

  • Possible to have clickable link in a compressed movie

    Hello forum readers,
    I have several QT movies that I'm compressing in Compressor 1.2.1.
    These movies will be offered free on the internet , and I would like to have my logo branding (bottom right corner) so when clicked - it would take them to the website in a browser.
    Is this possible?
    Thanks for any help you may offer,
    Luke Wonderly

    Greetings, 9mluke.
    While I've never done this, it is possible to have clickable urls in a Quicktime file. MacBreak Weekly does this. In fact, they have a video podcast which takes you step by step through the process. It requires a 3rd party program called LiveStage Pro to actually embed clickable links. All of that is described in their podcast which can be found via iTunes here:
    MacBreak 31: The Road To 1080p pt. 6

  • TS4123 Whenever I open the iTunes store, the home pages of all of the sections (Music, App Store, Films etc) are black. They still have clickable hyperlinks, but I can't see what I'm clicking. Any pages accessed through the drop-down menus or by randomly

    Whenever I open the iTunes store, the home pages of all of the sections (Music, App Store etc.) are BLACK.  They still have clickable hyperlinks, but I can't see what I'm clicking.  Any pagess accessed through the drop-down menus (even iHelp) or by randomly clicking I can't see.

    Thanks but it's just my desktop that doesn't see it though.  My notebook sees it everytime, even at the same exact time that my desktop doesn't see it.  For example yesterday when I was typing up this post, I was typing up the post on my notebook because my desktop didn't see the router.  I don't think it has anything to do with the router actually, but I wanted to see if anyone on here has encountered this issue before.  Other forums have similar issues but I've tried all of the fixes I found elsewhere and they didn't work.
    Any other ideas?
    Thanks!

  • How to create a clickable hyperlink on a freestanding image?

    I have a small part time business doing all kinds of image editing.  I get most of my work on a particular site that facilitates the meeting of clients and freelancers
    I just recently was awarded a job and accepted the job.  Right AFTER that, there was from the client an "Oh yeah, there's just one more thing I need done", (happens ALL THE TIME).
    The job was to edit an ultrasound of a fetus and incorporate the image into an invitation to a baby shower.  OK, no problem, right?
    The "Oh yeah, I've got one more thing", was that she wanted me to put two places where the mother was registered for gifts and she wanted both of these places to be an active, clickable hyperlink.
    I've done a small amount of research and read a few ideas about "slicing" but all the tutorials appear to be speaking about doing this to an image on a website, which isn't what I need.  I need to create a freestanding image, one that could be attached and or inserted into an email to someone and one that you would be able to click on the text of an URL and it would be an active hypelink that would take you to the store's website.
    1.  Is this even a possibility?
    2.  If so, is it something that can be done ONLY with CS5 or would I need other software to accommplish this?
    Please remember, this is NOT to be part of a website, it needs to be a freestanding image that can be emailed and that has an active, working, hyperlink as part of the image.
    THANKS!
    Randy

    There is no such thing. All you could do is create an HTML e-mail, but many users won't even view it in that mode for security reasons and it may get filtered. Similarly, Flash-based content may get removed/ not show up. So at best, if you really want to get a clickable document, you could use a PDF file containing a link. but did i mention that the user can suppress those, too? Well, sorry, but you are SOL. You want something that for a million reasons nobodyy can give you. The best you can do, as always, is host your content on a proper website and send peopel a link to it...
    Mylenium

  • Is it possible to put a link (hyperlink) on a row in a report!!

    I need to know if it is possible to put a link (hyperlink) on a row in a report via a form or other method. The link will be different for each row.
    I know you can add a column link but this will be the same link for each row.
    I also know its possible using websheets.
    However i am using an interactive report and form in a database. APEX 4.1.
    The best method would be through a form. When the user creates a new entry for a row he can also add a link.
    Edited by: user12629904 on Aug 21, 2012 8:23 AM

    How do you propose to built the link? Is it embedded in a table? Built by a function? Yes, you can have a link in a report, just as a column like a date and an image..
    If you offer more information, maybe SOMEONE can offer up more help..
    Version of APEX?
    More details on the links?
    Thank you,
    Tony Miller
    Dallas, TX

  • Is it possible to add a clickable link to the presentation area of a category

    Is it possible to add a clickable link to the presentation area of a category
    Websphere 61
    Oracle 10g
    RequestCenter 2008.3 SP4
    Ie 6
    Hi:
    I am trying to add a clickable link to open a web page.  I would like it to be visible on the presentation area (top) of the "Consumer Service Catalog".   I can make the button, but when clicked nothing happens.  I have tried several of the button commands like onclick, but then I get a js error.
    Thank you
    Daniel
    Safeway Inc.

    Yes. You can use html tags in the presentation area ot the  <b>Consumer Services</b> display category

  • Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?

    Howdy!
    I'll bet I'm not the only one wishing for this.  Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise.  In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
    This can be a critical issue:  keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
    A movie's topical hierarchy could be along these lines, for example ...
    Section 1 - National Brands
    What are National Brands?
    Why Are They Important to Our Business?
    Working with Nat. Brands
    Practice Your Knowledge
    Section 2 - International Brands
    What are International Brands?
    Why Are They Important to Our Business?
    Working with Intl. Brands
    Practice Your Knowledge
    You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
    I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
    Has anyone solved for this need yet?
    I'm all ears, and you'd be doing learners of the world a huge favor.
    Thanks!

    Hi, Jim.
    Thanks for being 'on the case' and looking into this so quickly.  Your
    findings are encouraging, although my user base is generally working with
    IE 6 and FP8 or 9.
    Since the only thing I may influence is getting  IT to help push out FP10,
    I'm hoping it's more of a player- than a browser-version issue.
    I'll test things out by Monday and let you know the results.  Wish me luck!
    Dave
                                                                                    From:       Jim Leichliter <[email protected]>                                                                               
    To:         Dave Tressler <[email protected]>                                                                               
    Date:       03/26/2010 06:02 PM                                                                               
    Subject:    Possible to Have ToC Default to Show Only Top Level (collapse
                  sublevels)?                                                                                
    Dave,
    I just tested this on my local web server and it worked fine.  I created a
    blank project with 8 slides.  Created my TOC with grouping... 2 slides in
    each group.  I turned on self paced learning.  I tried with and without the
    widget and it picked up where I left off in either case.  See
    https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en. 
    I published using FP10 and IE8 to view.  Notice any difference between
    your project and this one?
    Thanks,
    Jim Leichliter

  • Is it possible to have an attachment within a pdf doc print at the same time the main doc prints?

    Okay, so this may be kind of a weird question.  We have some users who are wanting to add a page to an already existing xml document and correct me if I'm wrong, but I've read that it's not possible to add/delete pages from a pdf that's in xml format.  Since that is not possible, I have added the page to the xml document as an attachment.  Now what I am wanting to know is if it is possible to have the attachment print out at the same time as the main document.  We are using the latest version of Adobe Reader and I have access to Adobe Acrobat Standard 9 & 10 and then I have access to Adobe Acrobat Pro 7.  I've been unable to find anyting via google or by searching this forum so hopefully I'll draw out some kind of smart cookies and we'll get this figured out.  I appreciate any and all input!
    Thanks,

    I know of no way to do this with Reader or XML.

Maybe you are looking for