Is it possible to have image as dashboard prompt

Hello,
our customer wants to have an image in dashboard which would act as prompt, passing chosen values (the image regions where user cliks) to another requests in that dasbhoard page.
I know it is possible to create image prompt for single answers report, but the wish is that image should be visible all the time in dashboard (so that user can choose different value just by clicking on it). Answers image prompt is visible only until user chooses the value, after that image is not shown anymore.
I would really appreciate help in either of following questions:
(1) How to keep Answers image prompt visible after user chooses the value?
(2) How to put an image in dashboard that would pass presentation variable values to reports? I think this could be possible by html but have no idea how...

Hi,
I had done some searching before posting the question here. However, thanks to your response I went through Venkats blog one more time, and found article wich I previously overlooked (because I thought it is the one about Answers prompts)
http://oraclebizint.wordpress.com/2008/06/11/oracle-bi-ee-1013332-image-maps-html-and-go-url/
So, thanks.

Similar Messages

  • How to use action links or master-detail event in dashboard prompts?

    Hi,
    I am new to OBIEE 11g. I have created three reports 1.Daily Data Report, 2.Weekly Data Report 3. Monthly Data Report.
    I have created one dashboard prompt in which I have specified choices as Daily, Weekly and Hourly.
    My requirement is that when I select the choice as 'Daily' I should get Daily Data report below Dashboard prompt.
    When I select the choice as 'Weekly' I should get Weekly Data report below Dashboard prompt
    and when I select the choice as 'Monthly' I should get Monthly Data report below Dashboard prompt.
    How this can be achieved in OBIEE 11g?

    Hi,
    What you do is just put this 3 different reports in 3 different dashboard sections and in section condition assign a condition based on presentation variable so that when u select weekly in the prompt only the weekly section condition should be true and other 2 section conditions should be false, in that case only the true section condition will display and false conditions will hidden.
    Try implement this u will definetly can achieve the result.
    Note: Create Variable prompt for this as best practice
    Revert for any queries.
    Mark if helpful/correct.
    Thanks
    Edited by: 934322 on Mar 19, 2013 7:49 AM

  • Dashboard prompt filter navigating to different tabular reports

    Hi,
    I was able to implement this halfway.
    My Dashboard prompt has 4 filters, the fourth filter has three drop down values.
    "Report with Sales Amount"
    "Report with Purchase Amount"
    "Report with both Purchase and Sales"
    when the user selects the first choice, it should navigate to my "SALES-REPORT" which is section2 of the dashboard page.
    when the user selects the second choice, it should navigate to my "PURCHASE-REPORT" which is section3 of the dashboard page.
    when the user selects the third choice, it should navigate to my "COMBINED-REPORT" which is section4 of the dashboard page.
    All three are three entirely different report, so far with previous advice, i have created the Dashboard prompt and the presentation variable, but unable to proceed further.
    Thanks for your time and help.

    I will show you how to do it with one. Repeat for the other two reports.
    1) Build a small report with any two CHAR columns. For the first column, click on the fx, copy the column name and then delete it. Type this: CASE WHEN 1=0 THEN (paste the column name you copied here) ELSE 'Report with Sales Amount' END. The second column leave as is. The reason for the second column is because OBIEE requires every report to have at least one column. Since we "dummied out" the first column, if you don't have another column, OBIEE will error.
    2) Put a filter on the first column and set it to the Presentation Variable you had for the fourth column prompt (the one the users can select "Report with Sales Amount" from).
    3) On your dashboard, drag the "SALES-REPORT" report to a section.
    4) On this section, click on the Section Properties button (NOT the report Properties button!) and select Guided Navigation.
    5) Browse to the small report you created in step 1) and click on the "when the report returns rows" radio button.
    So what this does is this: When the user selects "Report with Sales Amount" from the dashboard prompt, it will produce a row on your small report. And because of this, the Guided Navigation of the section will display this report. When the user selects anything else, the small report will return no rows and this section will not display.
    Repeat the above for the other two reports making the proper modifications.

  • Default value in dashboard prompt

    Hi,
    I have created 2 dashboard prompt one is projectnumber another one is date which is in 'MON-YYYY' format.
    My requirement is date prompt default value one month before a current month.
    Example if it is February 2012 it must displayed as JAN-2012
    Thanks in advance.

    Hi RR,
    Edit the Prompt.
    Under Default Selection select SQL Result and place the following query:
    SELECT concat(upper(CAST (MONTHname( TIMESTAMPADD(SQL_TSI_MONTH,-1, CURRENT_DATE)) AS CHAR(3))),concat('-',cast( YEAR( TIMESTAMPADD(SQL_TSI_MONTH,-1, CURRENT_DATE)) as char)))
    FROM "OBIA"
    Try this.. I think it will solve your issue.

  • Getting problem in Dashboard Prompts

    Hi All,
    I have designed a dashboard prompt for the time which captured data for month,quater and year.
    when i click on the month option to select some data and for example i have selected all the data from the month and click on ok and when again i open the selection option to select/deselect the some data then i find everything again (on the right side of this prompt) though all the earlier selected items are still to the left as well.
    can anyone help me in resolving this issue?
    thanks in advance.

    thanks kishore..
    it means oracle bi doesn't provide any solution for this...
    actually its good when user have to select some data from the available options but in case when he/she has to select more than 20 items from 100 items available then he/she can be confused about what items he/she has already selected...
    and when they click on the 'ok' button then all the duplilcates (which he/she has selected more than one time) will come to the display for column filters(via dashboard prompts).
    isn't it?

  • How to sort dashboard prompt elements

    Hi,
    I have a group dashboard prompt in which there are two prompts: fiscal year, and month. The month prompt is contrainted, that is, if a fiscal year is chosen, the month prompt shows only those months for the fy. My question is how can the month prompt is sorted in decending order? Appreciate any input.
    May

    Hi....
    If that is the case,
    you need to made 2 different prompts..
    Assign a variable for Year prompt as year_var something like this..
    And save with any name..
    Now create other prompt. here you need to write a SQL in Show SQL part of your prompt.
    SQL look like the following...
    *SELECT month FROM SubjectAreaname WHERE YEAR = '@{year_var}' ORDER BY month DESC*
    Save this with different name..
    Now add these 2 in one dashboard page..
    But due to this.. you find 2 GO button for each prompt.
    First you need to select value from Year prompt then click on First GO button, after your month column will be populated with values corresponding to that year.. in descending order.. So again Go..
    Hope it's clear..

  • Unnecessary Report refresh on the dashboard when changing the dashboard prompts

    Hello All
    I have two reports on a dashboard with two dashboard prompts for example Report 1) Year, State, Count; Filter: Year is prompted 2) Year, State, Count; FIlter: State is prompted. On the dashboard we have two reports Report1) and Report 2) with Year and State dashboard prompts.
    The issue is when you change year prompt both the reports gets refreshed even though nothing changes on report 2 but it still dissapears and appears as it is refreshing and  the same happens with report 1 when i change the state prompt it refreshes that report.
    Please letme know how i can limit the dashboard prompt to refresh only the report where it is prompted.
    Thanks
    Ravi

    are you talking about the database table caching? if so we are using OLAP cubes and I am not sure if caching is disabled. Is my issue related to caching? also another updated if I have just one dashboard prompt for example just year  only report 1 refreshes and the report 2 doesn't disappear. But when I add state dashboard prompt, which ever prompt I change state or year  both reports refreshes. The problem is when I add more than one prompt on the dashboard all the reports refreshes when the dashboard prompt selection changes. Any ideas.
    Thanks

  • Is it possible to have a hover effect easing out on multiple images when hovering on others?

    Im trying to use four small images to create a large image by using a hover effect. However when i hover over an image for instance 3 of 4, after hovering over 1 and 2, number 1's ease-out effects snaps back to the background image, rather than continuing to ease-out. Which i do not want. Is it possible to have numerous ease-out effects working at the same time? Using CSS.

    Could you show us a bit more of what you've done so far?
    I'm not sure I understand the desired result.
    Can you put your files online somwhere?
    Thanks

  • Is is possible to have the images as thumbnails and make it so you can click on them for a larger view and then click them again to have it go back to the original size? In an interactive pdf?

    I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
    Thank you in advance!
    Stephanie

    It can be done with Show/Hide buttons:
    Here's a button created from a small version of the image (notice that it's selected in the image below):
    The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
    The large image is also turned into a button (shown below):
    Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.

  • Possible to have dynamic default selections for a dashboard prompt?

    I'm running OBIEE 11.1.1.6.5, and I have customer who would like to know if it is possible to dynamically select default values on a dashboard prompt based upon other user prompted columns on the same prompt. For example, I built a dashboard prompt with three fields: Month, Customer, and Product; and I want to add a default selection to my Products prompt to pick the "top 4 products" based on the selected Month and Customer.. assuming every Customer+Month has a different "top 4 products".
    Does anyone please have a suggestion on how I could approach this solution?

    Thank you for your response. I've tested this approach and it seems promising. My concern I have there is how to treat "(All Choices)" values. Say the user selects All Choices on customer or period, and the presentation value in my SQL Results query reverts to whatever default value specified, which is not the intended behavior. My question then becomes how do I treat the null or All Choices and somehow omit the filter criteria or specify fy All Choices as a default to the presentation variable? Your advice is much appreciated.

  • Is it possible to have a poster image for audio in epub like iteractive pdf?

    Is it possible to

    Hi,
    Poster image if chosen in InDesign for audio does not show up in EPUB. This is a bug in HTML/EPUB export and we are aware of this.
    Regards,
    Pooja

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • Is it possible to have too many keyframes in one project in Premiere?

    Hi all,
    I'm using Premiere 6 on a Windows 7 ULT machine.
    Is it possible to have too many keyframes in one project in Premiere?
    I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open.  But I can re-open that exact same project file with 93 keyframes in it, no problem.
    But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
    I've tested and tested what is going on here and this seems to be what is causing the bad files.  I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
    This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
    The two slightly different app crash info panels show, in the first one below,
    "Fault Module Name: StackHash_e98d"
    ... and the second one shows,
    "Fault Module Name: PREMINFO.dll"
    ... both messages with a little more different info in each one.  I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them.  That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
    So even the error messages are inconsistent with two of the bad files.
    I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing.  Can anyone shed any light on this?
    Thanks,
    digi

    Bill,
    Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
    So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
    "To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
    Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
    But that isn't making any difference in this case.  Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
    Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
    "Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
    Method A:
    1. Open your Start menu and click Control Panel
    2. Browse to “System Maintenance” then “System”
    3. In the left panel, select “Advanced System Settings” from the available links
    4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
    5. Select the “Data Execution Prevention” tab.
    6. Select the option which reads “Turn on DEP for all programs and services except those I select”
    7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
    8. Click Apply or OK to commit your changes."
    But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
    So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
    Thanks again,
    digi

  • Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?

    Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?
    I basically want to create a rule that will send an automatically crafted form e-mail to the sender when I receive an e-mail with the subject line "New Swimmer". Is this possible?

    Thank you Todd, I was able to get it to work but I do have a few more questions...
    1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
    2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
    (It was actually much longer than that)
    Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
    Thanks,
    Evan

  • Is it possible to insert images in Adobe 9 Standard?

    It appears that it is not possible to insert images in Adobe 9 Standard.  There is no TouchUp Object Tool in the Advanced Editing Toolbar in the standard version.  Only a TouchUp Text Tool.  Is this not a basic function being able to add or change an image in a document?  The tutorials all show this as a capability but they are also demonstrating in the Pro version of Acrobat.  Is there a work around or have I been suckered into buying a product that doesn't quite meet my needs? 

    The Touch-Up Object tool is not available in Standard.
    Adobe Acrobat is not meant to be a word processing program; it is meant to be a cross-platform method for document exchange. Changes are best made in the source program. While the answer to your question would not have been obvious from this list, it is a good reference for the difference between Acrobat products: http://www.adobe.com/products/acrobat/matrix.html .
    If for some reason it is not possible to edit the source file and create the pdf again, you can insert your image as a form button and then flatten it. A lot more work, but post if you want help with this.
    --For other folks reading this thread, Adobe offers trials of its programs. Consider testing before buying.

Maybe you are looking for